Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
#
b3a12c29 |
| 15-Jun-2023 |
Stephan Gerhold <stephan@gerhold.net> |
dt-bindings: remoteproc: glink-rpm-edge: Use "glink-edge" as node name
Semantically glink-edge and glink-rpm-edge are similar: Both describe the communication channels to a remote processor. The RPM
dt-bindings: remoteproc: glink-rpm-edge: Use "glink-edge" as node name
Semantically glink-edge and glink-rpm-edge are similar: Both describe the communication channels to a remote processor. The RPM glink-edge is a special case that needs slightly different properties but otherwise it is used exactly the same.
To improve consistency use the same "glink-edge" node name also for glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid matching the wrong schema. qcom,glink-edge.yaml is always referenced explicitly from other schemas. This will already ensure that the nodes are being checked, so it's not necessary to bind to all nodes named "glink-edge".
Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22 |
|
#
82f2734d |
| 27-Mar-2023 |
Rob Herring <robh@kernel.org> |
dt-bindings: remoteproc: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@ker
dt-bindings: remoteproc: Drop unneeded quotes
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327170114.4102315-1-robh@kernel.org
show more ...
|
Revision tags: v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11 |
|
#
6f9c2f19 |
| 08-Feb-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: remoteproc: qcom,glink-edge: correct label description
Correct the description of 'label' property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob He
dt-bindings: remoteproc: qcom,glink-edge: correct label description
Correct the description of 'label' property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230208101545.45711-7-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16 |
|
#
1135e936 |
| 23-Dec-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: remoteproc: qcom,glink-edge: add GPR node
The existing SM8450 DTS (and newer platforms) come with a "gpr" child node, not "apr":
sm8450-sony-xperia-nagara-pdx224.dtb: remoteproc@3000
dt-bindings: remoteproc: qcom,glink-edge: add GPR node
The existing SM8450 DTS (and newer platforms) come with a "gpr" child node, not "apr":
sm8450-sony-xperia-nagara-pdx224.dtb: remoteproc@30000000: glink-edge: Unevaluated properties are not allowed ('gpr' was unexpected) From schema: Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221223132213.81273-1-krzysztof.kozlowski@linaro.org
show more ...
|
Revision tags: v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68 |
|
#
df870fef |
| 09-Sep-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: remoteproc: qcom,glink-edge: require channels in children
GLINK edge contains subnodes representing devices related to the remote processor. Each of such device (e.g. APR or FastRPC) m
dt-bindings: remoteproc: qcom,glink-edge: require channels in children
GLINK edge contains subnodes representing devices related to the remote processor. Each of such device (e.g. APR or FastRPC) must have a "qcom,glink-channels" property. However the APR or FastRPC device can be also part of other communication - SMD - thus their schema does not require "qcom,glink-channels".
To make the GLINK edge bindings strict, require "qcom,glink-channels" for its children.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220909125403.803158-6-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
Revision tags: v5.15.67, v5.15.66 |
|
#
ed18a9b1 |
| 07-Sep-2022 |
Abel Vesa <abel.vesa@linaro.org> |
dt-bindings: misc: fastrpc convert bindings to yaml
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate dt-entries correctly and any future additions can go into yaml format.
dt-bindings: misc: fastrpc convert bindings to yaml
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate dt-entries correctly and any future additions can go into yaml format.
Use compute-cb@ subnodes instead of just cb@. Add qcom,glink-channels and qcom,smd-channels missing properties to make sure dtbs_check doesn't fail right off the bat. Correct the name of the parent node in the example from smd-edge to glink-edge.
Since now the qcom,fastrpc bindings document is yaml, update the reference to it in qcom,glink-edge and also use $ref.
Also update the MAINTAINERS file to point to the yaml version.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220907074301.3996021-1-abel.vesa@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
Revision tags: v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41 |
|
#
ae9d475a |
| 17-May-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for glink-edge
'glink-edge' property appears in multiple bindings, so split it into one place which can be re-used. This reduces co
dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for glink-edge
'glink-edge' property appears in multiple bindings, so split it into one place which can be re-used. This reduces code duplication and adds strict schema matching for glink-edge nodes (instead of just "type:object").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220517070113.18023-8-krzysztof.kozlowski@linaro.org
show more ...
|