Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
#
1ca09f57 |
| 19-Jun-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: net: micrel,ks8851: allow SPI device properties
The Micrel KS8851 can be attached to SPI or parallel bus and the difference is expressed in compatibles. Allow common SPI properties whe
dt-bindings: net: micrel,ks8851: allow SPI device properties
The Micrel KS8851 can be attached to SPI or parallel bus and the difference is expressed in compatibles. Allow common SPI properties when this is a SPI variant and narrow the parallel memory bus properties to the second case.
This fixes dtbs_check warning:
qcom-msm8960-cdp.dtb: ethernet@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230619170134.65395-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0 |
|
#
a11a5deb |
| 28-Sep-2022 |
Marek Vasut <marex@denx.de> |
dt-bindings: memory-controller: st,stm32: Split off MC properties
Split st,stm32-fmc2-ebi.yaml specific properties into st,stm32-fmc2-ebi-props.yaml, split memory-controller bus peripheral propertie
dt-bindings: memory-controller: st,stm32: Split off MC properties
Split st,stm32-fmc2-ebi.yaml specific properties into st,stm32-fmc2-ebi-props.yaml, split memory-controller bus peripheral properties into mc-peripheral-props.yaml, reference the st,stm32-fmc2-ebi-props.yaml in mc-peripheral-props.yaml and reference the mc-peripheral-props.yaml in micrel,ks8851.yaml.
This way, the FMC2 controller properties in Micrel KSZ8851MLL ethernet controller node can be properly validated.
Fixes the following warning: arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dtb: ethernet@1,0: Unevaluated properties are not allowed ('bank-width', 'st,fmc2-ebi-cs-mux-enable', ... 'st,fmc2-ebi-cs-write-data-hold-ns' were unexpected)
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220928181944.194808-1-marex@denx.de [krzk: trim warning message] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
show more ...
|
Revision tags: v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
#
8480a727 |
| 20-Jun-2021 |
Marek Vasut <marex@denx.de> |
dt-bindings: net: ks8851: Convert to YAML schema
Convert the Micrel KSZ8851 DT bindings to YAML schema.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Mill
dt-bindings: net: ks8851: Convert to YAML schema
Convert the Micrel KSZ8851 DT bindings to YAML schema.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux@dh-electronics.com Cc: netdev@vger.kernel.org To: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20210620210741.100206-1-marex@denx.de Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|