|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61 |
|
| #
80137388 |
| 16-Aug-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: iio: adc: use spi-peripheral-props.yaml
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
proper
dt-bindings: iio: adc: use spi-peripheral-props.yaml
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58 |
|
| #
e7b61fc4 |
| 09-Aug-2020 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
dt-bindings: iio: adc: ti,tlc4541 binding conversion
Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the datasheet. The
dt-bindings: iio: adc: ti,tlc4541 binding conversion
Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the datasheet. The value of 200kHz
is the max sampling frequency of the ADC, not the clock frequency of
the SPI bus.
Added #io-channel-cells to allow use as a provider of channels to
other devices via the consumer binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-By: Phil Reid <preid@electromag.com.au>
Cc: Phil Reid <preid@electromag.com.au>
Link: https://lore.kernel.org/r/20200809111753.156236-14-jic23@kernel.org
show more ...
|
|
Revision tags: v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58 |
|
| #
e7b61fc4 |
| 09-Aug-2020 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
dt-bindings: iio: adc: ti,tlc4541 binding conversion
Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the
dt-bindings: iio: adc: ti,tlc4541 binding conversion
Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the datasheet. The value of 200kHz
is the max sampling frequency of the ADC, not the clock frequency of
the SPI bus.
Added #io-channel-cells to allow use as a provider of channels to
other devices via the consumer binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-By: Phil Reid <preid@electromag.com.au>
Cc: Phil Reid <preid@electromag.com.au>
Link: https://lore.kernel.org/r/20200809111753.156236-14-jic23@kernel.org
show more ...
|