dt-bindings: arm: stm32: Add compatible string for Linux Automation LXA TAC

Add DT compatible string for Linux Automation GmbH Test Automation
Controllers (LXA TAC).
LXA TACs are a development tool

dt-bindings: arm: stm32: Add compatible string for Linux Automation LXA TAC

Add DT compatible string for Linux Automation GmbH Test Automation
Controllers (LXA TAC).
LXA TACs are a development tool for embedded devices with a focus on
embedded Linux devices.

As of now there are two STM32MP157 based hardware generations (Gen 1 and
Gen 2) that have most of their hardware config in common.
In the future there will also be a STM32MP153 based hardware generation.

Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: stm32: document stm32mp257f-ev1 board

Add new entry for stm32mp257f-ev1 board.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@mi

dt-bindings: stm32: document stm32mp257f-ev1 board

Add new entry for stm32mp257f-ev1 board.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

dt-bindings: arm: stm32: Add Phytec STM32MP1 board

The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to
1 GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash.

Signed-off-by: Steffe

dt-bindings: arm: stm32: Add Phytec STM32MP1 board

The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to
1 GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: drop redundant part of title (end)

The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.

Drop tr

dt-bindings: drop redundant part of title (end)

The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.

Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):

find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;

find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;

find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR Testbench board

Add DT compatible string for DHCOR Testbench board, which is a testbench
for testing of DHCOR SoM during manuf

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR Testbench board

Add DT compatible string for DHCOR Testbench board, which is a testbench
for testing of DHCOR SoM during manufacturing. This is effectively a
trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi,
Audio and LEDs removed and used as GPIOs instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact

Add DT compatible string for DH electronics STM32MP15xx DHCOR on DRC Compact
carrier board into YAML DT binding do

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact

Add DT compatible string for DH electronics STM32MP15xx DHCOR on DRC Compact
carrier board into YAML DT binding document. This system is a general purpose
DIN Rail Controller design.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP1

dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards

This boards are based on STM32MP151AAD3 and use 10BaseT1L for
communication.

- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L

dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards

This boards are based on STM32MP151AAD3 and use 10BaseT1L for
communication.

- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: correct blank lines

Correct blank lines to precesily separate entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kerne

dt-bindings: arm: stm32: correct blank lines

Correct blank lines to precesily separate entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards

The bindings for DH STM32MP1 SoM boards allows invalid combinations,
e.g. st,stm32mp153 SoC on a dh,stm32mp157c-dhcom-som SoM.

Split the enums

dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards

The bindings for DH STM32MP1 SoM boards allows invalid combinations,
e.g. st,stm32mp153 SoC on a dh,stm32mp157c-dhcom-som SoM.

Split the enums to properly match valid setups.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-binding: arm/stm32: Add emtrion hardware emSBC-Argon

This patch presents the yaml patch for the emtrion GmbH
Argon board series.

Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Ac

dt-binding: arm/stm32: Add emtrion hardware emSBC-Argon

This patch presents the yaml patch for the emtrion GmbH
Argon board series.

Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capa

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: treewide: Update @st.com email address to @foss.st.com

Not all @st.com email address are concerned, only people who have
a specific @foss.st.com email will see their entry updated.
For

dt-bindings: treewide: Update @st.com email address to @foss.st.com

Not all @st.com email address are concerned, only people who have
a specific @foss.st.com email will see their entry updated.
For some people, who left the company, remove their email.

Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Lionel Debieve <lionel.debieve@foss.st.com>
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Cc: Ludovic Barre <ludovic.barre@foss.st.com>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: pascal Paillet <p.paillet@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Philippe CORNU <philippe.cornu@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20211110150144.18272-6-patrice.chotard@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: stm32: document stm32mp135f-dk board

Add new entry for stm32mp135f-dk board.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acke

dt-bindings: stm32: document stm32mp135f-dk board

Add new entry for stm32mp135f-dk board.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: arm: stm32: Add compatible strings for ART-PI board

Art-pi based on stm32h750xbh6, with following resources:

-8MiB QSPI flash
-16MiB SPI flash
-32MiB SDRAM
-AP6212 wifi, bt, fm

detail

dt-bindings: arm: stm32: Add compatible strings for ART-PI board

Art-pi based on stm32h750xbh6, with following resources:

-8MiB QSPI flash
-16MiB SPI flash
-32MiB SDRAM
-AP6212 wifi, bt, fm

detail information can be found at:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacit

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board from Engicam.

i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
to

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE

dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

7" OF is a capacitive touch 7" Open Frame panel solutions.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.

Add bindings for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0

MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and L

dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0

MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1

The Linux Automation MC-1 is built around an OSD32MP15x SiP with CPU,
RAM, PMIC, Oscillator and EEPROM. Adjust the binding,

dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1

The Linux Automation MC-1 is built around an OSD32MP15x SiP with CPU,
RAM, PMIC, Oscillator and EEPROM. Adjust the binding, so the SiP
compatible is contained as well. This allows boot firmware to match
against it to apply fixups if necessary.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

show more ...

dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards

Document devicetree compatible strings of the DH SoMs and boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Tor

dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards

Document devicetree compatible strings of the DH SoMs and boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

show more ...

dt-bindings: Explicitly allow additional properties in board/SoC schemas

In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit.

dt-bindings: Explicitly allow additional properties in board/SoC schemas

In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As the top-level
board/SoC schemas always have additional properties, add
'additionalProperties: true'.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: More whitespace clean-ups in schema files

Clean-up incorrect indentation, extra spaces, and missing EOF newline in
schema files. Most of the clean-ups are for list indentation which
sho

dt-bindings: More whitespace clean-ups in schema files

Clean-up incorrect indentation, extra spaces, and missing EOF newline in
schema files. Most of the clean-ups are for list indentation which
should always be 2 spaces more than the preceding keyword.

Found with yamllint (now integrated into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: arm: Add missing root node constraint for board/SoC bindings

Board/SoC top-level compatible bindings should be constrained to the root
node. Add the missing constraints that the node na

dt-bindings: arm: Add missing root node constraint for board/SoC bindings

Board/SoC top-level compatible bindings should be constrained to the root
node. Add the missing constraints that the node name must be "/".

Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Anders Berg <anders.berg@lsi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201001200943.1193870-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: arm: stm32: document Odyssey compatible

Document device tree bindings of Seeed SoM and carrier board.

Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com>
Reviewed-by: Rob He

dt-bindings: arm: stm32: document Odyssey compatible

Document device tree bindings of Seeed SoM and carrier board.

Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

show more ...