LoongArch: Add KASAN (Kernel Address Sanitizer) support

1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
s

LoongArch: Add KASAN (Kernel Address Sanitizer) support

1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET

So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.

At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.

Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.

KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

show more ...

kasan, doc: note kasan.fault=panic_on_write behaviour for async modes

Note the behaviour of kasan.fault=panic_on_write for async modes, since
all asynchronous faults will result in panic (even if th

kasan, doc: note kasan.fault=panic_on_write behaviour for async modes

Note the behaviour of kasan.fault=panic_on_write for async modes, since
all asynchronous faults will result in panic (even if they are reads).

Link: https://lkml.kernel.org/r/ZJHfL6vavKUZ3Yd8@elver.google.com
Fixes: 452c03fdbed0 ("kasan: add support for kasan.fault=panic_on_write")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: add support for kasan.fault=panic_on_write

KASAN's boot time kernel parameter 'kasan.fault=' currently supports
'report' and 'panic', which results in either only reporting bugs or also
panic

kasan: add support for kasan.fault=panic_on_write

KASAN's boot time kernel parameter 'kasan.fault=' currently supports
'report' and 'panic', which results in either only reporting bugs or also
panicking on reports.

However, some users may wish to have more control over when KASAN reports
result in a kernel panic: in particular, KASAN reported invalid _writes_
are of special interest, because they have greater potential to corrupt
random kernel memory or be more easily exploited.

To panic on invalid writes only, introduce 'kasan.fault=panic_on_write',
which allows users to choose to continue running on invalid reads, but
panic only on invalid writes.

Link: https://lkml.kernel.org/r/20230614095158.1133673-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: allow sampling page_alloc allocations for HW_TAGS

As Hardware Tag-Based KASAN is intended to be used in production, its
performance impact is crucial. As page_alloc allocations tend to be bi

kasan: allow sampling page_alloc allocations for HW_TAGS

As Hardware Tag-Based KASAN is intended to be used in production, its
performance impact is crucial. As page_alloc allocations tend to be big,
tagging and checking all such allocations can introduce a significant
slowdown.

Add two new boot parameters that allow to alleviate that slowdown:

- kasan.page_alloc.sample, which makes Hardware Tag-Based KASAN tag only
every Nth page_alloc allocation with the order configured by the second
added parameter (default: tag every such allocation).

- kasan.page_alloc.sample.order, which makes sampling enabled by the first
parameter only affect page_alloc allocations with the order equal or
greater than the specified value (default: 3, see below).

The exact performance improvement caused by using the new parameters
depends on their values and the applied workload.

The chosen default value for kasan.page_alloc.sample.order is 3, which
matches both PAGE_ALLOC_COSTLY_ORDER and SKB_FRAG_PAGE_ORDER. This is
done for two reasons:

1. PAGE_ALLOC_COSTLY_ORDER is "the order at which allocations are deemed
costly to service", which corresponds to the idea that only large and
thus costly allocations are supposed to sampled.

2. One of the workloads targeted by this patch is a benchmark that sends
a large amount of data over a local loopback connection. Most multi-page
data allocations in the networking subsystem have the order of
SKB_FRAG_PAGE_ORDER (or PAGE_ALLOC_COSTLY_ORDER).

When running a local loopback test on a testing MTE-enabled device in sync
mode, enabling Hardware Tag-Based KASAN introduces a ~50% slowdown.
Applying this patch and setting kasan.page_alloc.sampling to a value
higher than 1 allows to lower the slowdown. The performance improvement
saturates around the sampling interval value of 10 with the default
sampling page order of 3. This lowers the slowdown to ~20%. The slowdown
in real scenarios involving the network will likely be better.

Enabling page_alloc sampling has a downside: KASAN misses bad accesses to
a page_alloc allocation that has not been tagged. This lowers the value
of KASAN as a security mitigation.

However, based on measuring the number of page_alloc allocations of
different orders during boot in a test build, sampling with the default
kasan.page_alloc.sample.order value affects only ~7% of allocations. The
rest ~93% of allocations are still checked deterministically.

Link: https://lkml.kernel.org/r/129da0614123bb85ed4dd61ae30842b2dd7c903f.1671471846.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Brand <markbrand@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: dynamically allocate stack ring entries

Instead of using a large static array, allocate the stack ring dynamically
via memblock_alloc().

The size of the stack ring is controlled by a new kas

kasan: dynamically allocate stack ring entries

Instead of using a large static array, allocate the stack ring dynamically
via memblock_alloc().

The size of the stack ring is controlled by a new kasan.stack_ring_size
command-line parameter. When kasan.stack_ring_size is not provided, the
default value of 32 << 10 is used.

When the stack trace collection is disabled via kasan.stacktrace=off, the
stack ring is not allocated.

Link: https://lkml.kernel.org/r/03b82ab60db53427e9818e0b0c1971baa10c3cbc.1662411800.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: support kasan.stacktrace for SW_TAGS

Add support for the kasan.stacktrace command-line argument for Software
Tag-Based KASAN.

The following patch adds a command-line argument for selecting t

kasan: support kasan.stacktrace for SW_TAGS

Add support for the kasan.stacktrace command-line argument for Software
Tag-Based KASAN.

The following patch adds a command-line argument for selecting the stack
ring size, and, as the stack ring is supported by both the Software and
the Hardware Tag-Based KASAN modes, it is natural that both of them have
support for kasan.stacktrace too.

Link: https://lkml.kernel.org/r/3b43059103faa7f8796017847b7d674b658f11b5.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: move boot parameters section in documentation

Move the "Boot parameters" section in KASAN documentation next to the
section that describes KASAN build options.

No content changes.

Link: htt

kasan: move boot parameters section in documentation

Move the "Boot parameters" section in KASAN documentation next to the
section that describes KASAN build options.

No content changes.

Link: https://lkml.kernel.org/r/870628e1293b4f44edf7cbcb92374ff9eb7503d7.1652203271.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/ec9c923f35e7c5312836c4624a7f317dc1ee2c1c.1652123204.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: update documentation

Do assorted clean-ups and improvements to KASAN documentation, including:

- Describe each mode in a dedicated paragraph.
- Split out a Support section that describes in

kasan: update documentation

Do assorted clean-ups and improvements to KASAN documentation, including:

- Describe each mode in a dedicated paragraph.
- Split out a Support section that describes in details which compilers,
architectures and memory types each mode requires/supports.
- Capitalize the first letter in the names of each KASAN mode.

[andreyknvl@google.com: rewording, per Marco]
Link: https://lkml.kernel.org/r/896b2d914d6b50d677fd7b38f76967cc705c01ba.1652203271.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/5bd58ebebf066593ce0e1d265d60278b5f5a1874.1652123204.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

kasan: documentation updates

Update KASAN documentation:

- Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
AS_HAS_LSE_ATOMICS as of commit 2decad92f4731 ("arm64: mte: Ensure

kasan: documentation updates

Update KASAN documentation:

- Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
AS_HAS_LSE_ATOMICS as of commit 2decad92f4731 ("arm64: mte: Ensure
TIF_MTE_ASYNC_FAULT is set atomically"), which requires Clang 12.

- Add description of the new kasan.vmalloc command line flag.

- Mention that SW_TAGS and HW_TAGS modes now support vmalloc tagging.

- Explicitly say that the "Shadow memory" section is only applicable to
software KASAN modes.

- Mention that shadow-based KASAN_VMALLOC is supported on arm64.

Link: https://lkml.kernel.org/r/a61189128fa3f9fbcfd9884ff653d401864b8e74.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: Extend KASAN mode kernel parameter

Architectures supported by KASAN_HW_TAGS can provide an asymmetric mode
of execution. On an MTE enabled arm64 hw for example this can be
identified with the

kasan: Extend KASAN mode kernel parameter

Architectures supported by KASAN_HW_TAGS can provide an asymmetric mode
of execution. On an MTE enabled arm64 hw for example this can be
identified with the asymmetric tagging mode of execution. In particular,
when such a mode is present, the CPU triggers a fault on a tag mismatch
during a load operation and asynchronously updates a register when a tag
mismatch is detected during a store operation.

Extend the KASAN HW execution mode kernel command line parameter to
support asymmetric mode.

Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20211006154751.4463-6-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

show more ...

mm/kasan: move kasan.fault to mm/kasan/report.c

Move the boot parameter 'kasan.fault' from hw_tags.c to report.c, so it
can support all KASAN modes - generic, and both tag-based.

Link: https://lkml

mm/kasan: move kasan.fault to mm/kasan/report.c

Move the boot parameter 'kasan.fault' from hw_tags.c to report.c, so it
can support all KASAN modes - generic, and both tag-based.

Link: https://lkml.kernel.org/r/20210713010536.3161822-1-woodylin@google.com
Signed-off-by: Woody Lin <woodylin@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: test: improve failure message in KUNIT_EXPECT_KASAN_FAIL()

The KUNIT_EXPECT_KASAN_FAIL() macro currently uses KUNIT_EXPECT_EQ() to
compare fail_data.report_expected and fail_data.report_found

kasan: test: improve failure message in KUNIT_EXPECT_KASAN_FAIL()

The KUNIT_EXPECT_KASAN_FAIL() macro currently uses KUNIT_EXPECT_EQ() to
compare fail_data.report_expected and fail_data.report_found. This always
gave a somewhat useless error message on failure, but the addition of
extra compile-time checking with READ_ONCE() has caused it to get much
longer, and be truncated before anything useful is displayed.

Instead, just check fail_data.report_found by hand (we've just set
report_expected to 'true'), and print a better failure message with
KUNIT_FAIL(). Because of this, report_expected is no longer used
anywhere, and can be removed.

Beforehand, a failure in:
KUNIT_EXPECT_KASAN_FAIL(test, ((volatile char *)area)[3100]);
would have looked like:
[22:00:34] [FAILED] vmalloc_oob
[22:00:34] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:991
[22:00:34] Expected ({ do { extern void __compiletime_assert_705(void) __attribute__((__error__("Unsupported access size for {READ,WRITE}_ONCE()."))); if (!((sizeof(fail_data.report_expected) == sizeof(char) || sizeof(fail_data.repp
[22:00:34] not ok 45 - vmalloc_oob

With this change, it instead looks like:
[22:04:04] [FAILED] vmalloc_oob
[22:04:04] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:993
[22:04:04] KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
[22:04:04] not ok 45 - vmalloc_oob

Also update the example failure in the documentation to reflect this.

Link: https://lkml.kernel.org/r/20210606005531.165954-1-davidgow@google.com
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update tests section

Update the "Tests" section in KASAN documentation:

- Add an introductory sentence.

- Add proper indentation for the list of ways to run KUnit tests.

- Punctua

kasan: docs: update tests section

Update the "Tests" section in KASAN documentation:

- Add an introductory sentence.

- Add proper indentation for the list of ways to run KUnit tests.

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/fb08845e25c8847ffda271fa19cda2621c04a65b.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update ignoring accesses section

Update the "Ignoring accesses" section in KASAN documentation:

- Mention __no_sanitize_address/noinstr.

- Mention kasan_disable/enable_current().

kasan: docs: update ignoring accesses section

Update the "Ignoring accesses" section in KASAN documentation:

- Mention __no_sanitize_address/noinstr.

- Mention kasan_disable/enable_current().

- Mention kasan_reset_tag()/page_kasan_tag_reset().

- Readability and punctuation clean-ups.

Link: https://lkml.kernel.org/r/4531ba5f3eca61f6aade863c136778cc8c807a64.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update shadow memory section

Update the "Shadow memory" section in KASAN documentation:

- Rearrange the introduction paragraph do it doesn't give a
"KASAN has an issue" impression.

kasan: docs: update shadow memory section

Update the "Shadow memory" section in KASAN documentation:

- Rearrange the introduction paragraph do it doesn't give a
"KASAN has an issue" impression.

- Update the list of architectures with vmalloc support.

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/00f8c38b0fd5290a3f4dced04eaba41383e67e14.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update HW_TAGS implementation details section

Update the "Implementation details" section for HW_TAGS KASAN:

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml

kasan: docs: update HW_TAGS implementation details section

Update the "Implementation details" section for HW_TAGS KASAN:

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/ee2caf4c138cc1fd239822c2abefd5af6c057744.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update SW_TAGS implementation details section

Update the "Implementation details" section for SW_TAGS KASAN:

- Clarify the introduction sentence.

- Punctuation, readability, and oth

kasan: docs: update SW_TAGS implementation details section

Update the "Implementation details" section for SW_TAGS KASAN:

- Clarify the introduction sentence.

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/69b9b2e49d8cf789358fa24558be3fc0ce4ee32c.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update GENERIC implementation details section

Update the "Implementation details" section for generic KASAN:

- Don't mention kmemcheck, it's not present in the kernel anymore.

- Don

kasan: docs: update GENERIC implementation details section

Update the "Implementation details" section for generic KASAN:

- Don't mention kmemcheck, it's not present in the kernel anymore.

- Don't mention GCC as the only supported compiler.

- Update kasan_mem_to_shadow() definition to match actual code.

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/f2f35fdab701f8c709f63d328f98aec2982c8acc.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update boot parameters section

Update the "Boot parameters" section in KASAN documentation:

- Mention panic_on_warn.

- Mention kasan_multi_shot and its interaction with panic_on_war

kasan: docs: update boot parameters section

Update the "Boot parameters" section in KASAN documentation:

- Mention panic_on_warn.

- Mention kasan_multi_shot and its interaction with panic_on_warn.

- Clarify kasan.fault=panic interaction with panic_on_warn.

- A readability clean-up.

Link: https://lkml.kernel.org/r/01364952f15789948f0627d6733b5cdf5209f83a.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update error reports section

Update the "Error reports" section in KASAN documentation:

- Mention that bug titles are best-effort.

- Move and reword the part about auxiliary stacks

kasan: docs: update error reports section

Update the "Error reports" section in KASAN documentation:

- Mention that bug titles are best-effort.

- Move and reword the part about auxiliary stacks from "Implementation
details".

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/3531e8fe6972cf39d1954e3643237b19eb21227e.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update usage section

Update the "Usage" section in KASAN documentation:

- Add inline code snippet markers.

- Reword the part about stack traces for clarity.

- Other minor clean-up

kasan: docs: update usage section

Update the "Usage" section in KASAN documentation:

- Add inline code snippet markers.

- Reword the part about stack traces for clarity.

- Other minor clean-ups.

Link: https://lkml.kernel.org/r/48427809cd4b8b5d6bc00926cbe87e2b5081df17.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: update overview section

Update the "Overview" section in KASAN documentation:

- Outline main use cases for each mode.

- Mention that HW_TAGS mode need compiler support too.

- Move

kasan: docs: update overview section

Update the "Overview" section in KASAN documentation:

- Outline main use cases for each mode.

- Mention that HW_TAGS mode need compiler support too.

- Move the part about SLUB/SLAB support from "Usage" to "Overview".

- Punctuation, readability, and other minor clean-ups.

Link: https://lkml.kernel.org/r/1486fba8514de3d7db2f47df2192db59228b0a7b.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: docs: clean up sections

Update KASAN documentation:

- Give some sections clearer names.

- Remove unneeded subsections in the "Tests" section.

- Move the "For developers" section and spl

kasan: docs: clean up sections

Update KASAN documentation:

- Give some sections clearer names.

- Remove unneeded subsections in the "Tests" section.

- Move the "For developers" section and split into subsections.

Link: https://lkml.kernel.org/r/c2bbb56eaea80ad484f0ee85bb71959a3a63f1d7.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kasan: Add KASAN mode kernel parameter

Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the

kasan: Add KASAN mode kernel parameter

Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.

KASAN requires a specific kernel command line parameter to make use of this
hw features.

Add KASAN HW execution mode kernel command line parameter.

Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.

[ Add a new var instead of exposing kasan_arg_mode to be consistent with
flags for other command line arguments. ]

Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-3-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

show more ...

kasan: clarify that only first bug is reported in HW_TAGS

Hwardware tag-based KASAN only reports the first found bug. After that MTE
tag checking gets disabled. Clarify this in comments and document

kasan: clarify that only first bug is reported in HW_TAGS

Hwardware tag-based KASAN only reports the first found bug. After that MTE
tag checking gets disabled. Clarify this in comments and documentation.

Link: https://lkml.kernel.org/r/00383ba88a47c3f8342d12263c24bdf95527b07d.1612546384.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...