usb: gadget: f_uac2: Optionally determine bInterval for HS and SS

Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set
to 0, determine the largest bInterval (4 to 1) for which the

usb: gadget: f_uac2: Optionally determine bInterval for HS and SS

Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set
to 0, determine the largest bInterval (4 to 1) for which the required
bandwidth of the max samplerate fits the max allowed packet size. If the
required bandwidth exceeds max bandwidth for single-packet mode
(ep->mc=1), keep bInterval at 1.

The FS speed is left at fixed bInterval=1.

If for any speed the required bandwidth exceeds the max bandwidth
corresponding to the selected/determined bInterval, print a warning.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: Add HS/SS bInterval to configfs

Allow configuring the HS/SS bInterval through configfs, via
parameters p_hs_bint/c_hs_bint separately for playback/capture.

The default param va

usb: gadget: f_uac2: Add HS/SS bInterval to configfs

Allow configuring the HS/SS bInterval through configfs, via
parameters p_hs_bint/c_hs_bint separately for playback/capture.

The default param values are left at the original 4.

Suggested-by: John Keeping <john@metanate.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: allow changing interface name via configfs

This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
se

usb: gadget: f_uac2: allow changing interface name via configfs

This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
settings panel, so being able to change it is useful. It will default
to "Source/Sink" just as before.

Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Link: https://lore.kernel.org/r/20220122112446.1415547-2-t123yh.xyz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: Support multiple sampling rates

A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a s

usb: gadget: f_uac2: Support multiple sampling rates

A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a sampling rate, the internal active rate (stored in
struct f_uac2) is updated.

The gadget no longer supports only one frequency. Therefore USB strings
corresponding to the clock sources are renamed from specific Hz value to
general names Input clock/Output clock.

Config strings with single value stay compatible with the previous
version.

Multiple samplerates passed as configuration arrays to g_audio module
when built for f_uac2.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220121155308.48794-6-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

docs: ABI: fixed formatting in configfs-usb-gadget-uac2

Added missing tab, line breaks.

Fixes: e3088ebc1b97 ("docs: ABI: added missing num_requests param to UAC2")
Reported-by: Stephen Rothwell <sf

docs: ABI: fixed formatting in configfs-usb-gadget-uac2

Added missing tab, line breaks.

Fixes: e3088ebc1b97 ("docs: ABI: added missing num_requests param to UAC2")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220108105608.10726-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

docs: ABI: added missing num_requests param to UAC2

The existing configfs-usb-gadget-uac2 ABI doc for testing was missing
the num_requests param. The patch adds the parameter to the document.

Signe

docs: ABI: added missing num_requests param to UAC2

The existing configfs-usb-gadget-uac2 ABI doc for testing was missing
the num_requests param. The patch adds the parameter to the document.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211225130929.205629-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ABI: configfs-usb-gadget-uac2: fix a broken table

Changeset af6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
added some new elements to the table but didn't care enough to actually
a

ABI: configfs-usb-gadget-uac2: fix a broken table

Changeset af6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
added some new elements to the table but didn't care enough to actually
adjust the columns, causing the output to be broken as warned by
Sphinx when producing the documentation.

Readjust it for it to be a valid ReST table.

Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d253819a4c201b942d754682bb91dd278300fb79.1632740376.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: add volume and mute support

This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac2 driver by adding
Feature Units and interrupt endpoint.

Curre

usb: gadget: f_uac2: add volume and mute support

This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac2 driver by adding
Feature Units and interrupt endpoint.

Currently only master channel is supported.

Volume and mute are configurable through configfs,
by default volume has -100..0 dB range with 1 dB step.

Similar to existing flexible endpoints configuration,
Feature Unit won't be added to the topology if both
mute and volume are not enabled, also interrupt endpoint
isn't added to the device if no feature unit is present

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20210712125529.76070-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: u_audio: add real feedback implementation

This adds interface between userspace and feedback endpoint to report real
feedback frequency to the Host.

Current implementation adds new use

usb: gadget: u_audio: add real feedback implementation

This adds interface between userspace and feedback endpoint to report real
feedback frequency to the Host.

Current implementation adds new userspace interface ALSA mixer control
"Capture Pitch 1000000" (similar to aloop driver's "PCM Rate Shift 100000"
mixer control)

Value in PPM is chosen to have correction value agnostic of the actual HW
rate, which the application is not necessarily dealing with, while still
retaining a good enough precision to allow smooth clock correction on the
playback side, if necessary.

Similar to sound/usb/endpoint.c, a slow down is allowed up to 25%. This
has no impact on the required bandwidth. Speedup correction has an impact
on the bandwidth reserved for the isochronous endpoint. The default
allowed speedup is 500ppm. This seems to be more than enough but, if
necessary, this is configurable through a module parameter. The reserved
bandwidth is rounded up to the next packet size.

Usage of this new control is easy to implement in existing userspace tools
like alsaloop from alsa-utils.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210603220104.1216001-4-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: add adaptive sync support for capture

Current f_uac2 USB OUT (aka 'capture') synchronization
implements 'ASYNC' scenario which means USB Gadget has
it's own freerunning clock an

usb: gadget: f_uac2: add adaptive sync support for capture

Current f_uac2 USB OUT (aka 'capture') synchronization
implements 'ASYNC' scenario which means USB Gadget has
it's own freerunning clock and can update Host about
real clock frequency through feedback endpoint so Host
can align number of samples sent to the USB gadget to
prevent overruns/underruns

In case if Gadget can has no it's internal clock and
can consume audio samples at any rate (for example,
on the Gadget side someone records audio directly to
a file, or audio samples are played through an
external DAC as soon as they arrive), UAC2 spec
suggests 'ADAPTIVE' synchronization type.

Change UAC2 driver to make it configurable through
additional 'c_sync' configfs file.

Default remains 'asynchronous' with possibility to
switch it to 'adaptive'

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210603220104.1216001-3-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

docs: ABI: cleanup several ABI documents

There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.

Address t

docs: ABI: cleanup several ABI documents

There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.

Address them, in order to provide a clean output.

Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: add configfs support

Add support for using f_uac2 function as a component of a gadget
composed with configfs.

Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com>
Si

usb: gadget: f_uac2: add configfs support

Add support for using f_uac2 function as a component of a gadget
composed with configfs.

Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

show more ...

docs: ABI: cleanup several ABI documents

There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output re

docs: ABI: cleanup several ABI documents

There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.

Address them, in order to provide a clean output.

Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: gadget: f_uac2: add configfs support

Add support for using f_uac2 function as a component of a gadget
composed with configfs.

Tested-by: Sebastian Reimers <sebastian.reimer

usb: gadget: f_uac2: add configfs support

Add support for using f_uac2 function as a component of a gadget
composed with configfs.

Tested-by: Sebastian Reimers <sebastian.reimers@googlemail.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

show more ...