configurations/sbp1: Add CPURequired

SBP1 has 4 CPU sockets, thus add the 'CPURequired' property to only
show sensors for plugged CPUs.

Change-Id: I05ea307c0c9d901b276dcc7124b3c704e7ccd75b
Signed-o

configurations/sbp1: Add CPURequired

SBP1 has 4 CPU sockets, thus add the 'CPURequired' property to only
show sensors for plugged CPUs.

Change-Id: I05ea307c0c9d901b276dcc7124b3c704e7ccd75b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Swap NIC temperatures

NIC1 and NIC2 temperatures were swapped. NIC2 is connected to
a lower i2c bus than NIC1 is.

Change-Id: Ide839fd302968aa4f9581cd7e153f839e4ce423a
Signed-o

configurations: sbp1: Swap NIC temperatures

NIC1 and NIC2 temperatures were swapped. NIC2 is connected to
a lower i2c bus than NIC1 is.

Change-Id: Ide839fd302968aa4f9581cd7e153f839e4ce423a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Read RTC battery voltage in 15min interval

Reduce the RTC battery voltage poll interval to 15min.

Change-Id: I65cd5bcf23b78b9add205fc9b4b94250d6377747
Signed-off-by: Patrick R

configurations: sbp1: Read RTC battery voltage in 15min interval

Reduce the RTC battery voltage poll interval to 15min.

Change-Id: I65cd5bcf23b78b9add205fc9b4b94250d6377747
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

sbp1: Drop duplicated entries

Due to a bad rebase the entries were duplicated.

Change-Id: I9baadd5b176411b704db3c974fd9366271db925b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

configurations: sbp1: Display HBM rails only on HBM capable CPU

Make sure the HBM rails are shown in Webui only when socket with HBM
capable socket is installed.

It relies on using probe to check p

configurations: sbp1: Display HBM rails only on HBM capable CPU

Make sure the HBM rails are shown in Webui only when socket with HBM
capable socket is installed.

It relies on using probe to check presence of string 'HBM' in
version property.

TEST: HBM regulators are only shown when HBM CPUs are plugged and
the version property contains 'HBM'.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Change-Id: I254d0d5a145e250119fefd75d2715416593ddb85

show more ...

configurations: sbp1: Add Hysteresis

dbus-sensors uses a default threshold hysteresis of 2.55 V/A/°C,
which is too much for most sensors found on SBP1. In order to reset
the critical/warning thresho

configurations: sbp1: Add Hysteresis

dbus-sensors uses a default threshold hysteresis of 2.55 V/A/°C,
which is too much for most sensors found on SBP1. In order to reset
the critical/warning threshold the sensor value has to go out of
the acceptable range in the opposite direction. Adjust the hysteresis
to 1% of the threshold value.

Tested: Warning/Critical thresholds reset earlier when the value is
back to normal.

Change-Id: Ife33b456e930d2d8df61df9da8bcebb1a5f4d577
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Index CPUs from 0

Index PECI CPU sensors starting from index 0 as done on all
the other sensors:

Tested: PECI sensors are indexed from 0 in webui.

Change-Id: I292dc750cd4355d

configurations: sbp1: Index CPUs from 0

Index PECI CPU sensors starting from index 0 as done on all
the other sensors:

Tested: PECI sensors are indexed from 0 in webui.

Change-Id: I292dc750cd4355d3b098492c12f843b82cd11199
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Adjust thresholds

Update all thresholds to match IBM requirements.

Change-Id: I72833c0bad2261a277a9d5c20f9c45ca215dfe2f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elemen

configurations: sbp1: Adjust thresholds

Update all thresholds to match IBM requirements.

Change-Id: I72833c0bad2261a277a9d5c20f9c45ca215dfe2f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>

show more ...

configurations: sbp1: Configure PowerState of some suplies

Some sensor show up as critical when host is On.
Configure below supplies PowerState as On.
BCM1
BCM2
BCM3
P1V8_PCH_AUX
PVCORE_NIC2
PVCORE_

configurations: sbp1: Configure PowerState of some suplies

Some sensor show up as critical when host is On.
Configure below supplies PowerState as On.
BCM1
BCM2
BCM3
P1V8_PCH_AUX
PVCORE_NIC2
PVCORE_NIC1
P3V3_NIC
P1V2_NIC
P1V8_NIC
P1V05_PCH_AUX
PVCCFA_EHV_CPU0
PVCCINFAON_CPU0
PVCCFA_EHV_CPU1
PVCCINFAON_CPU1
PVCCFA_EHV_CPU2
PVCCINFAON_CPU2
PVCCFA_EHV_CPU3
PVCCINFAON_CPU3
PVCCIN_CPU0
PVCCFA_EHV_FIVRA_CPU0
PVCCIN_CPU1
PVCCFA_EHV_FIVRA_CPU1
PVCCIN_CPU2
PVCCFA_EHV_FIVRA_CPU2
PVCCIN_CPU3
PVCCFA_EHV_FIVRA_CPU3
PVNN_MAIN_CPU0
PVNN_MAIN_CPU3
PVNN_MAIN_CPU1
PVNN_MAIN_CPU2

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Change-Id: Ie7d50b3e9c121b8db6aeee0c7fbbdc0b71c6fd7d

show more ...

configurations: sbp1: Update input label name

PVCCD_HV_CPU* input power & current is actualy measure of DIMM power &
current. Hence update the same accordingly.

TEST=Build for sbp1 & make sure the

configurations: sbp1: Update input label name

PVCCD_HV_CPU* input power & current is actualy measure of DIMM power &
current. Hence update the same accordingly.

TEST=Build for sbp1 & make sure the updated labels are reflected.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Change-Id: I80110f785d7179dc23927b3e9ecbdd72379d23ff

show more ...

configurations: sbp1: Add MAX6639

Add the air inlet temperature sensors that are connected to the
MAX6639 that also control the fan PWM.

Tested: All 24 temperature sensors are visible on the webui.

configurations: sbp1: Add MAX6639

Add the air inlet temperature sensors that are connected to the
MAX6639 that also control the fan PWM.

Tested: All 24 temperature sensors are visible on the webui.

Change-Id: I4831a4cbf0f4e4b00b75e6d6d5bd58ab484e59eb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add MAX5970 SSB

SBP1 uses the MAX5970 eFuse to protect various FRUs, like rulerdrive
SSDs, fans and M.2 slots. While the MAX5970 is an eFuse and not a
regulator it's threated a

configurations: sbp1: Add MAX5970 SSB

SBP1 uses the MAX5970 eFuse to protect various FRUs, like rulerdrive
SSDs, fans and M.2 slots. While the MAX5970 is an eFuse and not a
regulator it's threated as such by setting a fixed output voltage that
is always equal to the input voltage. In addition to protecting the
outputs it provides voltage and current readings.

Support has been added to dbus-sensors in [1] and the Linux kernel [2].

Tested: All 27 MAX5970 channels provide sane readings.

1: https://gerrit.openbmc.org/c/openbmc/dbus-sensors/+/67549
2: https://github.com/torvalds/linux/commit/f5afdd13ed6c643c7243e685fe3cf5484b3fdfae

Change-Id: Ifb0216335a25215ae464e709e7db7f757e96baf1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Fix typo

Rename PVCDD_HV_CPU to PVCCD_HV_CPU.

Change-Id: I9f95c7bd61fd2e0cb8b97805d41e93a522b30429
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

configurations: sbp1: Update PHY LDOs

According to the KSZ9131RNX's datasheet the 1.2V PHY LDOs operate
on 1.25V with a non-uniform margin. Update the thresholds to prevent
a sensor warning, while t

configurations: sbp1: Update PHY LDOs

According to the KSZ9131RNX's datasheet the 1.2V PHY LDOs operate
on 1.25V with a non-uniform margin. Update the thresholds to prevent
a sensor warning, while the LDOs are within their normal operating
condition. Account for ADC noise and use slightly relaxed thresholds.

Tested: Confirmed on the webui that the PHY LDOs are no longer marked
as critical.

Change-Id: Icfc65e4563223248b07984e52a6b80912c9c1eff
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Swap PVCCIN and PVCCFA_EHV_FIRA

PVCCIN and PVCCFA_EHV_FIRA are on the same VR, but the channels
got mixed up. PVCCIN is actually the first channel and
PVCCFA_EHV_FIRA the secon

configurations: sbp1: Swap PVCCIN and PVCCFA_EHV_FIRA

PVCCIN and PVCCFA_EHV_FIRA are on the same VR, but the channels
got mixed up. PVCCIN is actually the first channel and
PVCCFA_EHV_FIRA the second. Also update name from FIRA to FIVRA.

Change-Id: I3eded98f9ea85b35d925b574b091492c58017bb8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add PCH temperature sensor

Add PCH temperature reported by Intel ME over IPMB and add it
to the fan PID loop.

Tested: PCH temperature is read and visible on the webui.

Change

configurations: sbp1: Add PCH temperature sensor

Add PCH temperature reported by Intel ME over IPMB and add it
to the fan PID loop.

Tested: PCH temperature is read and visible on the webui.

Change-Id: Ic4e3d8b53a1113ae2dc8d8eccc31a52ed2740a17
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add NIC temperature sensors

Add I2C temperature sensors for the two onboard NICs.
The temperature sensor is compatible to ADM1021.

Add both sensors to the fan PID loop.

Teste

configurations: sbp1: Add NIC temperature sensors

Add I2C temperature sensors for the two onboard NICs.
The temperature sensor is compatible to ADM1021.

Add both sensors to the fan PID loop.

Tested: Both temperature sensors are working and the
temperature is visible on the webui.

Change-Id: Ib1c4614b49969148b4610f689507ea418d04f9b8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add RTC ADC sensor

On SBP1 the RTC battery voltage can be read using an ADC when
RTC_BATT_TEST is set high.

Expose the sensor reading by adding the configuration.

Tested: RTC

configurations: sbp1: Add RTC ADC sensor

On SBP1 the RTC battery voltage can be read using an ADC when
RTC_BATT_TEST is set high.

Expose the sensor reading by adding the configuration.

Tested: RTC battery voltage can be read.

Change-Id: I5c1da4f8943faad01f696469cc9f9c86ebdc9954
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add PCH and AUX VRs to PID loop

Add the following missing regulators to PID loop:
- P5V_AUX
- P3V3_AUX
- P1V05_PCH_AUX
- P1V8_PCH_AUX

While adding the regulators also fix the

configurations: sbp1: Add PCH and AUX VRs to PID loop

Add the following missing regulators to PID loop:
- P5V_AUX
- P3V3_AUX
- P1V05_PCH_AUX
- P1V8_PCH_AUX

While adding the regulators also fix the I2C bus of P3V3_AUX, which is
on bus 34.

Tested: All regulators are used within swampd.

Change-Id: I93a96e7977d586e0d553cf0d1df8b0e09c8ca490
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: Add SBP1 config

- Add sbp1_baseboard, sbp1_chassis and sbp1_psu in configuration
- Update meson.build

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Ic76a19

configurations: Add SBP1 config

- Add sbp1_baseboard, sbp1_chassis and sbp1_psu in configuration
- Update meson.build

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Ic76a198a8a6115ea9224abe47eff0580e3063c09

show more ...