configurations: catalina_pdb: Add brick voltage & temperature thresholds

Add support for voltage and temperature threshold settings for brick
components on Catalina PDB brick board.

Signed-off-by:

configurations: catalina_pdb: Add brick voltage & temperature thresholds

Add support for voltage and temperature threshold settings for brick
components on Catalina PDB brick board.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Ia07690d6f1a9ff098f25511fc95ac9d98351831d

show more ...

configurations: catalina_pdb: Add hysteresis for fan speed thresholds

Add hysteresis settings for fan speed thresholds.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: I7c71af87de2c928

configurations: catalina_pdb: Add hysteresis for fan speed thresholds

Add hysteresis settings for fan speed thresholds.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: I7c71af87de2c928a97c7915b812ef2ea8cefce58

show more ...

configurations: catalina_pdb: Set PowerState for VR sensors on 2nd PDB

Align the VR sensors' PowerState setting with the main PDB.
Ensure that the VR sensors are only available when the host is powe

configurations: catalina_pdb: Set PowerState for VR sensors on 2nd PDB

Align the VR sensors' PowerState setting with the main PDB.
Ensure that the VR sensors are only available when the host is powered
on.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: I665e8a9f80e579c4c773902b72fcbecf481638c7

show more ...

configurations: yosemite4: Adjust fan speed UNC setting and fan duty

Summary:
1. Set UNC value based on the fan speed at PWM 85% and add 5%
hysteresis mechanism for them.
- Adjust UNC of inlet fan

configurations: yosemite4: Adjust fan speed UNC setting and fan duty

Summary:
1. Set UNC value based on the fan speed at PWM 85% and add 5%
hysteresis mechanism for them.
- Adjust UNC of inlet fan speed from 15730 to 13825 rpm.
- Update 691 rpm for inlet UNC fan speed.
- Adjust UNC of outlet fan speed from 15840 to 12400 rpm.
- Update 620 rpm for outlet UNC fan speed.
2. When one fan failed, fan duty is set to 100%.
3. When one slot is unplugged during service time, fan duty
is set to 100%.
(based on thermal team's requirements)

To prevent continuous UNC assertion/deassertion
when the PWM is at 100% due to fan speed fluctuation.

Tested:
- Check the WarningHigh threshold of the fan boards
- Check if many assert/deassert SEL when pwm 100%

Change-Id: I2540cc54069620cbcdacfabb03d09f149352fe54
Signed-off-by: Zoey YJ Chung <zoey.yj.chung.wiwynn@gmail.com>

show more ...

[yv4] move asset tag from board entity to chassis entity

Our internal toolings need asset tag to be associated with the chassis
FRU to work properly. In addition, the asset tag also make sense to
be

[yv4] move asset tag from board entity to chassis entity

Our internal toolings need asset tag to be associated with the chassis
FRU to work properly. In addition, the asset tag also make sense to
belong to chassis entity because they are in product session of EEPROM.

Change-Id: I208e895ac09fee44f935dd752269100701db12cb
Signed-off-by: Xinyuan Wang <wang.x.6f@gmail.com>

show more ...

configuration: minerva: correct the fan tach mapping

Correct the fan tach index to the right map in the FCB5/FCB6.

Change-Id: I1bb2643bafc1a7d796f4e518b81574832264da69
Signed-off-by: Yang Chen <yan

configuration: minerva: correct the fan tach mapping

Correct the fan tach index to the right map in the FCB5/FCB6.

Change-Id: I1bb2643bafc1a7d796f4e518b81574832264da69
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configuration: ventura: add hysteresis

The hysteresis value is set to 2% of the trigger threshold
to ensure more precise triggering of assert and deassert for
sensors like a 12V sensor. For example,

configuration: ventura: add hysteresis

The hysteresis value is set to 2% of the trigger threshold
to ensure more precise triggering of assert and deassert for
sensors like a 12V sensor. For example, with normal readings
and thresholds at ±10% (10.8V to 13.2V), the default value of
2.55 is too large for this range.

Change-Id: I75df51a2a5ae1a36878787226e6ba451c87b02a4
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

show more ...

configurations: catalina_hdd: Add support for 2nd source board

This commit introduces configuration support for the Catalina HDD 2nd
source board, which utilizes the ISL28022 ADC sensor for monitori

configurations: catalina_hdd: Add support for 2nd source board

This commit introduces configuration support for the Catalina HDD 2nd
source board, which utilizes the ISL28022 ADC sensor for monitoring.

For newly built boards, use the `BOARD_INFO_AM4` field to determine the
ADC chip type. For older boards that lack `BOARD_INFO_AM4`, use
`BOARD_PART_NUMBER` to determine the chip type.

- Main source board:
- ADC Chip: INA230
- BOARD_PART_NUMBER: 3FF0NHB0010, 3FF0NHB0030
- BOARD_INFO_AM4: adc-ina

- 2nd source board:
- ADC Chip: ISL28022
- BOARD_PART_NUMBER: 3FF0NHB0020
- BOARD_INFO_AM4: adc-isl

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Icd7094eb11eaee17dc38e5b8b6c3f0032f08846c

show more ...

configurations: minerva: modify calibration and threshold

- Modify scale and offset value for calibration of the infineon hsc.
- Remove the low critical threshold of the hsc power.

Change-Id: I7ca3

configurations: minerva: modify calibration and threshold

- Modify scale and offset value for calibration of the infineon hsc.
- Remove the low critical threshold of the hsc power.

Change-Id: I7ca3dd2ca1543b285bb6b5c095427f145c7833aa
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: ventura: modify fan board probe condition

Change the probe condition from multiple line to one line on the
ventura fan board main/second source to avoid the duplicate probe
problem.

configurations: ventura: modify fan board probe condition

Change the probe condition from multiple line to one line on the
ventura fan board main/second source to avoid the duplicate probe
problem.

Change-Id: Ifeb1adb4efc11712ee3f251d1f981052183c605d
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: yosemite4: remove MEDUSA ADC LCR

Remove MEDUSA ADC LCR settings for INA233, INA238, ISL28022, RTQ6056.

Tested:
Check sensor thresholds. They all work fine.

Change-Id: Ibbf9986bda0c

configurations: yosemite4: remove MEDUSA ADC LCR

Remove MEDUSA ADC LCR settings for INA233, INA238, ISL28022, RTQ6056.

Tested:
Check sensor thresholds. They all work fine.

Change-Id: Ibbf9986bda0cea26117fafb9fe3d8f97b19bcd90
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>

show more ...

configuration: minerva: support network blade fru

There are two configurations of network blades in the Minerva platform.

One is Janga; the other is Tahan. They do not have any sensors
but includes

configuration: minerva: support network blade fru

There are two configurations of network blades in the Minerva platform.

One is Janga; the other is Tahan. They do not have any sensors
but includes an EEPROM that should be exported on the D-Bus,
including Redfish.

These two types of network blades can be assembled on any of the
I2C buses: 40, 41, 42, 44, 45, or 46 on the CMM (Chassis
Management Module).

Therefore, we have redefined the numbering scheme for each blade
based on its location in the rack.

Change-Id: I1a536a4252a12863bd38f43ec621e55b05b273ce
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: yosemite4: Adjust inlet and outlet fan speed UNC

Set UNC value based on the fan speed at PWM 90%
1. Adjust UNC of inlet fan speed from 14600 to 15730 rpm.
2. Adjust UNC of outlet fan

configurations: yosemite4: Adjust inlet and outlet fan speed UNC

Set UNC value based on the fan speed at PWM 90%
1. Adjust UNC of inlet fan speed from 14600 to 15730 rpm.
2. Adjust UNC of outlet fan speed from 13300 to 15840 rpm.

Change-Id: Id45ef1bdf0839a050f6de4928ab09171b66256e7
Signed-off-by: Zoey YJ Chung <zoey.yj.chung.wiwynn@gmail.com>

show more ...

configurations: harma: modify the cycle time

Modify the cycle time to 3 seconds to prevent excessive polling.

Test:
00:37:58 swampd: PID name: Stepwise_NIC
00:37:58 swampd: inputs: NIC_Temp_1,
00:3

configurations: harma: modify the cycle time

Modify the cycle time to 3 seconds to prevent excessive polling.

Test:
00:37:58 swampd: PID name: Stepwise_NIC
00:37:58 swampd: inputs: NIC_Temp_1,
00:37:58 swampd: PID name: Stepwise_SCM_INLET
00:37:58 swampd: inputs: SCM_INLET_TEMP_C,
00:37:58 swampd: Build failsafe logger for Zone 0 with initial
failsafe mode: 0
00:37:58 swampd: pushing zone 0
00:37:58 swampd: PID Zone 0 max SetPoint 20 requested by Stepwise_Brick
00:38:01 swampd: Zone 0 fans, entering failsafe mode, output pwm: 85

Change-Id: I0d3f66e801bb24a00c652914d8f07aba542ae3e1
Signed-off-by: Peter Yin <peter.yin@quantatw.com>

show more ...

ventura: Modify entity-manager Fan voltage formula

Change-Id: I18c686b5c2275f426cc022a8bbb093ab3d65130f
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

sentinel-dome: remove interface from board configs

The ManagedHost interface used by bmcweb would populate the
ComputerSystem collection with 16 members instead of 8.
Removing the interface from the

sentinel-dome: remove interface from board configs

The ManagedHost interface used by bmcweb would populate the
ComputerSystem collection with 16 members instead of 8.
Removing the interface from the board configs and
only keeping it on the chassis config resolves the issue.

Tested: Build target image and observe result of a getSubTree
call constrained to the interface return 8 objects.

Change-Id: Ib87fa81e436df725b461d2b96907111ad4cf9a4f
Signed-off-by: Oliver Brewka <mox669.dev@gmail.com>

show more ...

ProductId: remove property

At both the top-level and in Item.Board.Motherboard schemas was a
required property: "ProductId". This property has never been documented
in phosphor-dbus-interfaces and

ProductId: remove property

At both the top-level and in Item.Board.Motherboard schemas was a
required property: "ProductId". This property has never been documented
in phosphor-dbus-interfaces and is only used in exactly 1 OEM IPMI
provider (and no where else)[1, 2]. Strip this unused property out.

Test Plan: entity-manager schema validators pass. Search in code base
for usages.

[1]: https://github.com/openbmc/intel-ipmi-oem/blob/0fcc73f1cf8c486bb8079e68813c239c4cc41bbc/src/oemcommands.cpp#L2929
[2]: https://github.com/search?q=org%3Aopenbmc+%2F%28%3F-i%29ProductId%2F+-repo%3Aopenbmc%2Flinux+-repo%3Aopenbmc%2Fqemu&type=code

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I81f02c54aaee78e5d1c3b3e020437ebd3d7b4e3f

show more ...

ventura: Add max setting for sensor trigger

RMC add max setting and threshold value for sensor threshold trigger.

Change-Id: I7d9f60f21af0ce3fea0a10eb07beac25f139aafe
Signed-off-by: Jason Hsu <jaso

ventura: Add max setting for sensor trigger

RMC add max setting and threshold value for sensor threshold trigger.

Change-Id: I7d9f60f21af0ce3fea0a10eb07beac25f139aafe
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

show more ...

configurations: ventura: support RMC with motherboard interface

Add a Motherboard interface on the Ventura RMC board.

Change-Id: Id5a7120a5e1c967281696bb2543c2695c4ff1d01
Signed-off-by: PKLee-Quant

configurations: ventura: support RMC with motherboard interface

Add a Motherboard interface on the Ventura RMC board.

Change-Id: Id5a7120a5e1c967281696bb2543c2695c4ff1d01
Signed-off-by: PKLee-Quanta <p.k.lee@quantatw.com>

show more ...

configurations: minerva: modify scale and offset for infineon hsc

Modify scale and offset value for calibration of the infineon hsc.

Change-Id: Ie483a446229d6b9c01ecc741acdc16069a3947fe
Signed-off-

configurations: minerva: modify scale and offset for infineon hsc

Modify scale and offset value for calibration of the infineon hsc.

Change-Id: Ie483a446229d6b9c01ecc741acdc16069a3947fe
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configuration: harma: add fan table

1. Add fan table in the config files so that the fan table
could be created dynamically according to the FRU devices.
harma_mb.json, harma_mb_vr_infineon.json

2.

configuration: harma: add fan table

1. Add fan table in the config files so that the fan table
could be created dynamically according to the FRU devices.
harma_mb.json, harma_mb_vr_infineon.json

2. Change fan naming from 0-based to 1-based.
harma_fanboard.json

Change-Id: Id3852b2d546cbf02d6f0515a343aab4f4f228a74
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

configurations: harma_mb: update hysteresis

Since the sensor MB_PVDD18_S5_VOLT_V has VSENSE, its reported values
are very precise, resulting in a narrow UCR and LCR range. Adding a
2% hysteresis in

configurations: harma_mb: update hysteresis

Since the sensor MB_PVDD18_S5_VOLT_V has VSENSE, its reported values
are very precise, resulting in a narrow UCR and LCR range. Adding a
2% hysteresis in this case would make the threshold difficult to
trigger, so the hysteresis is set to 0.

Change-Id: I3521b909405c9de24c5568e56d510b07d5796e1b
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

configurations: yosemite4: Modify fan control configs

Modify fan control configs according to the test result from thermal
team.

Change-Id: I6408dbeb2385972d7ffbc88a3a768b1e44cd8f38
Signed-off-by:

configurations: yosemite4: Modify fan control configs

Modify fan control configs according to the test result from thermal
team.

Change-Id: I6408dbeb2385972d7ffbc88a3a768b1e44cd8f38
Signed-off-by: Zoey YJ Chung <zoey.yj.chung.wiwynn@gmail.com>

show more ...

meta: yosemite4: Update SD and WF DIMM names

Updated the DIMM sensor input names for Sentinel Dome and Wailuafalls
to align with the new version BIC(04.1) PDR specifications.

Change-Id: I95d5e3bf46

meta: yosemite4: Update SD and WF DIMM names

Updated the DIMM sensor input names for Sentinel Dome and Wailuafalls
to align with the new version BIC(04.1) PDR specifications.

Change-Id: I95d5e3bf460c7d353674f19e082f8ca3cb480360
Signed-off-by: Eric Yang <eric.yang.wiwynn@gmail.com>

show more ...

configuration: ventura: support 2nd source board

There are two sources of RMC/Fan board on the ventura platform. To
distinguish between them, the FRU field (Board Custom Data 4) is used to
apply the

configuration: ventura: support 2nd source board

There are two sources of RMC/Fan board on the ventura platform. To
distinguish between them, the FRU field (Board Custom Data 4) is used to
apply the appropriate configuration.
Addtionallyy, the old name of "ventura_rmc" and "ventura_fanboard" have
been change to the name which is follow the naming conventions used in
Catalina.

Change-Id: I94ecbb2ba9599faee31dab7ebede81156e69e458
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...