| 07be659f | 09-Jan-2026 |
Fred Chen <Fred.Chen@quantatw.com> |
configurations: santabarbara: add PDB2 HSC MP5998 sensor
Add mp5998 HSC sensor support for P12V AUX voltage and current
monitoring.
Change-Id: I9b05f445c7a79668cd3f3e1a9418e9dd31e9c651
Signed-off-b
configurations: santabarbara: add PDB2 HSC MP5998 sensor
Add mp5998 HSC sensor support for P12V AUX voltage and current
monitoring.
Change-Id: I9b05f445c7a79668cd3f3e1a9418e9dd31e9c651
Signed-off-by: Fred Chen <Fred.Chen@quantatw.com>
show more ...
|
| 3c9b2800 | 13-Jan-2026 |
Ken Chen <Ken.Chen@quantatw.com> |
configurations: yosemite5: update MB VR sensor thresholds
* update MB VR sensor thresholds
* Correcting E1S board threshold setting error
Change-Id: I865ca1455651b2afb505485825e813489115390f
Signed
configurations: yosemite5: update MB VR sensor thresholds
* update MB VR sensor thresholds
* Correcting E1S board threshold setting error
Change-Id: I865ca1455651b2afb505485825e813489115390f
Signed-off-by: Ken Chen <Ken.Chen@quantatw.com>
show more ...
|
| 8417803b | 22-Jan-2026 |
Kevin Tung <kevin.tung.openbmc@gmail.com> |
configurations: yosemite5: add fan presence gpio
Add presence GPIOs for I2CFan to detect fan presence.
Test: Unplug FAN3; verify presence via D-Bus
```
for i in {0..3}; do busctl get-property \
xyz
configurations: yosemite5: add fan presence gpio
Add presence GPIOs for I2CFan to detect fan presence.
Test: Unplug FAN3; verify presence via D-Bus
```
for i in {0..3}; do busctl get-property \
xyz.openbmc_project.FanSensor \
/xyz/openbmc_project/inventory/FAN${i}_TACH_IL_SPEED_RPM \
xyz.openbmc_project.Inventory.Item Present; done
b true
b true
b true
b false
```
Change-Id: I39431ae539229383dd814912096be47a2b8d0210
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
show more ...
|
| b932fa39 | 26-Jan-2026 |
Kevin Tung <kevin.tung.openbmc@gmail.com> |
configurations: yosemite5: add XDP710 calibration
Add calibration for the XDP710 as required by the power team.
Tested on Yosemite5; sensor readings are correct.
Change-Id: I6cd4b46ad2a6640f7f9f84
configurations: yosemite5: add XDP710 calibration
Add calibration for the XDP710 as required by the power team.
Tested on Yosemite5; sensor readings are correct.
Change-Id: I6cd4b46ad2a6640f7f9f84f910b4ff1bbe332e20
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
show more ...
|
| d7318896 | 22-Jan-2026 |
Leo Yang <Leo-Yang@quantatw.com> |
configurations: yosemite5: update FSC from v3 table
Based on the latest table update from the Thermal Team,
FSC-related configurations have been updated.
Change-Id: I4f6229c3dca0e92418311826d39e30f
configurations: yosemite5: update FSC from v3 table
Based on the latest table update from the Thermal Team,
FSC-related configurations have been updated.
Change-Id: I4f6229c3dca0e92418311826d39e30f5196a04e0
Signed-off-by: Leo Yang <Leo-Yang@quantatw.com>
show more ...
|
| 5bb4db9a | 27-Jan-2026 |
Kyle Hsieh <Kyle.Hsieh@quantatw.com> |
configurations: ventura2: Modify the sensor scale and offset
Modify the scale and offset after HW tuning.
Change-Id: I7db45d61e44c8f00f2c1910208f43ab9f036459b
Signed-off-by: Kyle Hsieh <Kyle.Hsieh@
configurations: ventura2: Modify the sensor scale and offset
Modify the scale and offset after HW tuning.
Change-Id: I7db45d61e44c8f00f2c1910208f43ab9f036459b
Signed-off-by: Kyle Hsieh <Kyle.Hsieh@quantatw.com>
show more ...
|
| 6c7b8845 | 09-Dec-2025 |
Oliver Brewka <oliver.brewka@9elements.com> |
configuration: yosemite4: Item.System interface
This change is based on a gerrit discussion [1] we had in PDI regarding
assoctiations, in hopes of resolving remaining issues.
Currently we map invent
configuration: yosemite4: Item.System interface
This change is based on a gerrit discussion [1] we had in PDI regarding
assoctiations, in hopes of resolving remaining issues.
Currently we map inventory items like chassis, cpu, dimms, etc via
xyz.openbmc_project.Inventory.Decorator.ManagedHost interface.
Although this works, this has two disadvantages:
a) The ManagedHost interface is not defined as an Inventory.Item, it is
defined as an Inventory.Decorator (which it should be). But associations
the way we currently use them (on physical entities), should ideally be
defined only on Inventory.Item(s).
b) No single-host configuration is utilizing the ManagedHost interface
The above is solved using xyz.openbmc_project.Inventory.Item.System.
a) It is a Inventory.Item.
b) Most single-host configurations upstream implement it.
With this change we can continue defining the associations in PDI and
push changes regarding Redfish into the right direction.
[1] https://gerrit.openbmc.org/c/openbmc/phosphor-dbus-interfaces/+/85082
Change-Id: I8510072d1be923f6fa4cfa8b9ba0a65f297f8e25
Signed-off-by: Oliver Brewka <oliver.brewka@9elements.com>
show more ...
|
| 720a370f | 12-Jul-2025 |
Oliver Brewka <oliver.brewka@9elements.com> |
configuration: yosemite4: physical topology ports
The following configuration updates add the physical topology entries
for the yosemite4 platform. The configured ports create containing
association
configuration: yosemite4: physical topology ports
The following configuration updates add the physical topology entries
for the yosemite4 platform. The configured ports create containing
associations between a) the enclosure chassis and the blade chassis and
b) the blade chassis to the sentinel dome baseboards.
The resulting association endpoints will help to form correct responses
in bmcweb.
Tested: Check dbus for the described association endpoints
$ busctl tree xyz.openbmc_project.ObjectMapper
```
...
| | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Chassis
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Chassis/containing
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_1_Chassis
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_1_Chassis/contained_by
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_1_Chassis/containing
| | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_2_Chassis
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_2_Chassis/contained_by
| | | |- /xyz/openbmc_project/inventory/system/chassis/Yosemite_4_Sentinel_Dome_Slot_2_Chassis/containing
...
| | |- /xyz/openbmc_project/inventory/system/board/Yosemite_4_Sentinel_Dome_T1_Slot_1
| | | |- /xyz/openbmc_project/inventory/system/board/Yosemite_4_Sentinel_Dome_T1_Slot_1/contained_by
| | |- /xyz/openbmc_project/inventory/system/board/Yosemite_4_Sentinel_Dome_T1_Slot_2
| | | |- /xyz/openbmc_project/inventory/system/board/Yosemite_4_Sentinel_Dome_T1_Slot_2/contained_by
...
```
Change-Id: Ic0b950b149d9aa246048b150e518bae3dd024000
Signed-off-by: Oliver Brewka <oliver.brewka@9elements.com>
show more ...
|
| ed2377d1 | 21-Jan-2026 |
Frank Chen <FrankChen4@quantatw.com> |
configurations: santabarbara: update MB VR sensor thresholds
Due to the MPS solution MP9945 VR FW setting limitation, there is a
200 µs delay in filtering voltage peaks.
For this rail, the CPU max
configurations: santabarbara: update MB VR sensor thresholds
Due to the MPS solution MP9945 VR FW setting limitation, there is a
200 µs delay in filtering voltage peaks.
For this rail, the CPU maximum allowable voltage is 1.88 V, and only
2–3 systems are observed reaching 1.854–1.855 V (with the UCR set to
1.85 V following the controller OVP setting, without triggering OVP
protection).
Therefore, it is suggested to adjust the UCR value up to 1.865 V.
Tested-on: santabarbara
```
root@bmc:~# mfg-tool sensor-display | table-sensor-display
sensor status value units LNR LCR LNC UNC UCR UNR
------------------------------ ----------- ---------- -------- --- ----------- ----------- --- ----------- ---
MB_PVDD18_S5_VOLT_V ok 1.7869 Volts N/A 1.68 N/A N/A 1.865 N/A
MB_VR_PVDD18_S5_VOLT_V ok 1.8 Volts N/A 1.68 N/A N/A 1.865 N/A
```
Change-Id: Ifc8a7896290f284f589cc3afd6d6a3ddf72e0dbf
Signed-off-by: Frank Chen <FrankChen4@quantatw.com>
show more ...
|
| b6975f05 | 06-Jan-2026 |
Kyle Hsieh <Kyle.Hsieh@quantatw.com> |
configurations: Add Ventura2 system config
Introduce initial configuration files for Ventura2 system.
-ventura2_aalc.json: AALC Module Board
-ventura2_canbus.json: CANBUS Module Board
-ventura2_fan
configurations: Add Ventura2 system config
Introduce initial configuration files for Ventura2 system.
-ventura2_aalc.json: AALC Module Board
-ventura2_canbus.json: CANBUS Module Board
-ventura2_fan_tic.json: Fan Board
-ventura2_management.json: Management Board
-ventura2_minisas_bottom.json: MiniSAS Bottom Board
-ventura2_minisas_top.json: MiniSAS Top Board
-ventura2_rmcv2_mb.json: Motherboard
-ventura2_scm.json: Secure Control Module
-ventura2_vt1_2.json: VT1 and VT2 Module Board
-ventura2_vt3.json: VT3 Module Board
Change-Id: I4465b65cb938037bb5163b5afafc91b10e41b07b
Signed-off-by: Kyle Hsieh <Kyle.Hsieh@quantatw.com>
show more ...
|
| b65a1c84 | 15-Jan-2026 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: rename E1.S temp sensor to match MB silkscreen
Description:
MB silkscreen has changed, so we need to rename E1.S temperature
sensor to match it.
Tested:
Check that temperat
configurations: anacapa: rename E1.S temp sensor to match MB silkscreen
Description:
MB silkscreen has changed, so we need to rename E1.S temperature
sensor to match it.
Tested:
Check that temperature sensors can be created successfully.
MB_E1S0_TEMP_C ok 21 DegreesC
MB_E1S1_TEMP_C ok 23 DegreesC
MB_E1S2_TEMP_C ok 32 DegreesC
MB_E1S3_TEMP_C ok 27 DegreesC
MB_E1S_BOOT_TEMP_C ok 41 DegreesC
Change-Id: Ia11a57f3d13063bd899896c296ef541fd91a6f6f
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| 283a3015 | 15-Jan-2026 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: modify temp sensors with two Right PDB versions
Description:
Based on Right PDB HW design change(TMP75 change to TMP432),
we need to create two configuration JSON files.
One
configurations: anacapa: modify temp sensors with two Right PDB versions
Description:
Based on Right PDB HW design change(TMP75 change to TMP432),
we need to create two configuration JSON files.
One for EVT1 and one for later versions.
anacapa_pdb_r.json:
PDB_R_OUTLET_TEMP_C
PDB_R_P12V_STBY_VRM_AMB_TEMP_C
PDB_R_EAM3_AMB_TEMP_C
anacapa_pdb_r_evt1.json:
PDB_R_OUTLET_TEMP_C
Tested:
Check that temp sensors can be created successfully base on Right PDB
EVT1/EVT2.
Change-Id: I08cd5dbf8fdf3c597e060b898d5b87a6e0279f6c
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| 9908b599 | 15-Jan-2026 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: remove MB DIMM monitor sensors
Description:
Because MB HW design has changed and INA230 was removed in EVT2,
we need to remove DIMM monitor sensors.
Change-Id: I756d066a19e
configurations: anacapa: remove MB DIMM monitor sensors
Description:
Because MB HW design has changed and INA230 was removed in EVT2,
we need to remove DIMM monitor sensors.
Change-Id: I756d066a19e681ec9f086e1a0ddbd192e857ad19
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| 8508882b | 08-Jan-2026 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: rename temp sensor name to avoid conflict
Description:
Some ambient temperature sensors are named after nearby components.
However, this can cause confusion or conflicts, so
configurations: anacapa: rename temp sensor name to avoid conflict
Description:
Some ambient temperature sensors are named after nearby components.
However, this can cause confusion or conflicts, so “AMB” is added
to the name to distinguish them.
Tested:
Check that temp sensors can be created successfully.
BRB_L_PCIE_SW_AMB_TEMP_C ok 20.813 DegreesC
BRB_R_PCIE_SW_AMB_TEMP_C ok 21.688 DegreesC
PDB_L_EAM0_AMB_TEMP_C ok 21.5 DegreesC
PDB_L_EAM1_AMB_TEMP_C ok 21.625 DegreesC
PDB_R_EAM2_AMB_TEMP_C ok 26.625 DegreesC
PDB_R_P12V_MB_VRM_AMB_TEMP_C ok 25.688 DegreesC
Change-Id: I56db0a61e376184752c8bbb5c9df53baea6e4c73
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| 6fe60bad | 13-Jan-2026 |
Colin Huang <colin.huang2@amd.com> |
configurations: anacapa: add Decorator.Compatible
Add Decorator.Compatible fields to identify the BMC compatibility
from the detected entity-manager config.
This allows interaction with other applic
configurations: anacapa: add Decorator.Compatible
Add Decorator.Compatible fields to identify the BMC compatibility
from the detected entity-manager config.
This allows interaction with other applications.
Change-Id: Id608df343d4c606bc81e2feed4b477145e112ff0
Signed-off-by: Colin Huang <colin.huang2@amd.com>
show more ...
|
| 57f7c33f | 14-Jan-2026 |
Frank Chen <FrankChen4@quantatw.com> |
configurations: santabarbara: update SWB VR sensor thresholds
Update SWB VR sensor thresholds and add corresponding hysteresis values.
Tested on: Santabarbara
```
root@bmc:~# mfg-tool sensor-displa
configurations: santabarbara: update SWB VR sensor thresholds
Update SWB VR sensor thresholds and add corresponding hysteresis values.
Tested on: Santabarbara
```
root@bmc:~# mfg-tool sensor-display 2>/dev/null | table-sensor-display
sensor status value units LNR LCR LNC UNC UCR UNR
------------------------------ ----------- ---------- -------- --- ----------- ----------- --- ----------- ---
SWB_P0V81_PEX_0_CURR_A ok 9 Amperes N/A N/A N/A N/A 37.95 N/A
SWB_P0V81_PEX_0_PWR_W ok 7 Watts N/A N/A N/A N/A 33.85 N/A
SWB_P0V81_PEX_0_VOLT_V ok 0.8 Volts N/A 0.736 N/A N/A 0.892 N/A
SWB_P0V81_PEX_1_CURR_A ok 9 Amperes N/A N/A N/A N/A 47.75 N/A
SWB_P0V81_PEX_1_PWR_W ok 8 Watts N/A N/A N/A N/A 42.57 N/A
SWB_P0V81_PEX_1_VOLT_V ok 0.802 Volts N/A 0.736 N/A N/A 0.892 N/A
SWB_P0V895_PEX_CURR_A ok 52.5 Amperes N/A N/A N/A N/A 201.25 N/A
SWB_P0V895_PEX_PWR_W ok 46 Watts N/A N/A N/A N/A 192.79 N/A
SWB_P0V895_PEX_VOLT_V ok 0.888 Volts N/A 0.758 N/A N/A 0.958 N/A
SWB_P1V2_PEX_CURR_A ok 2 Amperes N/A N/A N/A N/A 11.2 N/A
SWB_P1V2_PEX_PWR_W ok 3 Watts N/A N/A N/A N/A 14.44 N/A
SWB_P1V2_PEX_VOLT_V ok 1.2 Volts N/A 1.1 N/A N/A 1.29 N/A
```
Change-Id: Ic26f2e62162e6d04bb504c1d055b0c8ed2644210
Signed-off-by: Frank Chen <FrankChen4@quantatw.com>
show more ...
|
| c10c91f6 | 07-Jan-2026 |
Dirk Chen <dirkchen@amd.com> |
configurations: anacapa: Revise the I2C settings on the DCSCM CPLD
description:
Enable the I2C firmware update path on the LCMXO3D_9400 of the DCSCM.
Revise the correct I2C settings.
tested:
'''
cu
configurations: anacapa: Revise the I2C settings on the DCSCM CPLD
description:
Enable the I2C firmware update path on the LCMXO3D_9400 of the DCSCM.
Revise the correct I2C settings.
tested:
'''
curl -k -u root:0penBmc https://<BMC_IP>/redfish/v1/UpdateService/FirmwareInventory/Anacapa_SCM_CPLD_8033
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/Anacapa_SCM_CPLD_8033",
"@odata.type": "#SoftwareInventory.v1_1_0.SoftwareInventory",
"Description": "Other image",
"Id": "Anacapa_SCM_CPLD_8033",
"Name": "Software Inventory",
"Status": {
"Health": "OK",
"HealthRollup": "OK",
"State": "Enabled"
},
"Updateable": true,
"Version": "25.12.17"
'''
Change-Id: Iadf56dcb4dfb3c19c77f6e24c0ce540414842274
Signed-off-by: Dirk Chen <dirkchen@amd.com>
show more ...
|
| 8a333700 | 12-Jan-2026 |
Alexander Hansen <alexander.hansen@9elements.com> |
schemas/global: remove 'Bus' property
Remove 'Bus' property from toplevel EM Config schema. From the commit
which added it [1], it is not clear what it is supposed to be doing and
undocumented.
Adj
schemas/global: remove 'Bus' property
Remove 'Bus' property from toplevel EM Config schema. From the commit
which added it [1], it is not clear what it is supposed to be doing and
undocumented.
Adjust 3 configurations to remove this property.
Tested: Config Validation Pass
Fixes: 9453a68f40c832db47a73d1d32b9bac81a5cdd8a
References:
[1] https://github.com/openbmc/entity-manager/commit/9453a68f40c832db47a73d1d32b9bac81a5cdd8a
Change-Id: Ib95f7a414782e9bda1df9c65c23d85dfc4573ac7
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
show more ...
|
| bf868153 | 26-Dec-2025 |
Leo Wang <leo.jt.wang@fii-foxconn.com> |
configurations: clemente: add interposer and E1.S BP CPLD redfish update
Add CPLD device definitions for the Clemente interposer and E1.S HDD
board in Entity Manager.
This change introduces CPLD no
configurations: clemente: add interposer and E1.S BP CPLD redfish update
Add CPLD device definitions for the Clemente interposer and E1.S HDD
board in Entity Manager.
This change introduces CPLD nodes with firmware metadata for both the
interposer and HDD boards, enabling CPLD firmware update handling.
The CPLD definitions include vendor IANA and compatible hardware
information required by the Redfish firmware update flow.
Change-Id: I5c73b7f88444a886e89a5cf40721cfe6874767c0
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
show more ...
|
| c32fdfe8 | 18-Dec-2025 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: modify BRB VR sensor name and type
Description:
Modify BRB VR sensor name to meet HW design
Modify sensor type to meet VR device
Tested:
Check that MB VR sensors can be cre
configurations: anacapa: modify BRB VR sensor name and type
Description:
Modify BRB VR sensor name to meet HW design
Modify sensor type to meet VR device
Tested:
Check that MB VR sensors can be created successfully.
BRB_L_VR_P0V85_VDD_CURR_A ok 54.562 Amperes
BRB_L_VR_P0V85_VDD_PWR_W ok 48.75 Watts
BRB_L_VR_P0V85_VDD_TEMP_C ok 42 DegreesC
BRB_L_VR_P0V85_VDD_VOLT_V ok 0.895 Volts
BRB_L_VR_P0V8_VDDA_CURR_A ok 10.875 Amperes
BRB_L_VR_P0V8_VDDA_PWR_W ok 8.75 Watts
BRB_L_VR_P0V8_VDDA_TEMP_C ok 38 DegreesC
BRB_L_VR_P0V8_VDDA_VOLT_V ok 0.826 Volts
BRB_R_VR_P0V85_VDD_CURR_A ok 55.25 Amperes
BRB_R_VR_P0V85_VDD_PWR_W ok 47.75 Watts
BRB_R_VR_P0V85_VDD_TEMP_C ok 47 DegreesC
BRB_R_VR_P0V85_VDD_VOLT_V ok 0.865 Volts
BRB_R_VR_P0V8_VDDA_CURR_A ok 14.75 Amperes
BRB_R_VR_P0V8_VDDA_PWR_W ok 12.25 Watts
BRB_R_VR_P0V8_VDDA_TEMP_C ok 41 DegreesC
BRB_R_VR_P0V8_VDDA_VOLT_V ok 0.826 Volts
Change-Id: I5247fea88eccb118fd100e4848c45e88c1747b27
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| 3df24b4e | 06-Jan-2026 |
Carl Lee <carl.lee@amd.com> |
configurations: anacapa: modify fan sensors with two Left PDB versions
Description:
Based on Left PDB HW design change(Commit 17200fd), we need to create
two configuration JSON files.
One for EVT1
configurations: anacapa: modify fan sensors with two Left PDB versions
Description:
Based on Left PDB HW design change(Commit 17200fd), we need to create
two configuration JSON files.
One for EVT1 and one for later versions.
anacapa_pdb_l.json: All fan sensors are created.
anacapa_pdb_l_evt1.json: The following fan speed sensors can't be
created.
FAN3_TACH_IL_SPEED_RPM
FAN4_TACH_IL_SPEED_RPM
FAN4_TACH_OL_SPEED_RPM
Tested:
Check that fan sensors can be created successfully base on Left PDB
EVT1/EVT2.
Change-Id: I35998b65429a75debd69b2d235a81ce52cf5d27c
Signed-off-by: Carl Lee <carl.lee@amd.com>
show more ...
|
| adecd824 | 07-Jan-2026 |
Daniel Hsu <Daniel-Hsu@quantatw.com> |
configuration: harma: fix swapped fan table reading and output
The fan table had the reading and output fields reversed.
Update the table to correct the mapping.
Change-Id: Ice4114ffbba9fb179c7bbad
configuration: harma: fix swapped fan table reading and output
The fan table had the reading and output fields reversed.
Update the table to correct the mapping.
Change-Id: Ice4114ffbba9fb179c7bbad0dba6b1cc6f0f1319
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>
show more ...
|
| 7af5a39f | 03-Nov-2025 |
Peter Yin <peter.yin@quantatw.com> |
configuration: harma: add PDB power monitor calibration
Add calibration data for the first and second PDB power
monitor components.
Change-Id: If392d2db6194f74400aade0396baf2cc5f2fe8da
Signed-off-b
configuration: harma: add PDB power monitor calibration
Add calibration data for the first and second PDB power
monitor components.
Change-Id: If392d2db6194f74400aade0396baf2cc5f2fe8da
Signed-off-by: Peter Yin <peter.yin@quantatw.com>
show more ...
|
| 15ac80a0 | 30-Dec-2025 |
Alex Wang <alex.ts.wang@fii-foxconn.com> |
configurations: clemente: add interposer thermal sensor for PVT2 and MP
Add TMP75 thermal sensors for the interposer on PVT2 and MP boards
to monitor board temperature.
Change-Id: I6dbf1a3e68d0e2ee
configurations: clemente: add interposer thermal sensor for PVT2 and MP
Add TMP75 thermal sensors for the interposer on PVT2 and MP boards
to monitor board temperature.
Change-Id: I6dbf1a3e68d0e2ee6fd45aa70a4dbf63c1b3d067
Signed-off-by: Alex Wang <alex.ts.wang@fii-foxconn.com>
show more ...
|
| c2cb85fb | 05-Jan-2026 |
Leo Yang <Leo-Yang@quantatw.com> |
configurations: yosemite5: modify medusa ADC128D818 sensor max min
Due to the small sensor readings, the max and min values must be
adjusted to prevent numerical changes falling below the hysteresis
configurations: yosemite5: modify medusa ADC128D818 sensor max min
Due to the small sensor readings, the max and min values must be
adjusted to prevent numerical changes falling below the hysteresis
threshold, which would cause value updates to be skipped.
Change-Id: I79c9f4bada1eec112e311eb2811a7c6cbca80c65
Signed-off-by: Leo Yang <Leo-Yang@quantatw.com>
show more ...
|