xref: /openbmc/u-boot/tools/mkimage.c (revision 473af36a)
1 /*
2  * (C) Copyright 2008 Semihalf
3  *
4  * (C) Copyright 2000-2009
5  * DENX Software Engineering
6  * Wolfgang Denk, wd@denx.de
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include "mkimage.h"
12 #include <image.h>
13 #include <version.h>
14 
15 static void copy_file(int, const char *, int);
16 
17 /* parameters initialized by core will be used by the image type code */
18 static struct image_tool_params params = {
19 	.os = IH_OS_LINUX,
20 	.arch = IH_ARCH_PPC,
21 	.type = IH_TYPE_KERNEL,
22 	.comp = IH_COMP_GZIP,
23 	.dtc = MKIMAGE_DEFAULT_DTC_OPTIONS,
24 	.imagename = "",
25 	.imagename2 = "",
26 };
27 
28 static enum ih_category cur_category;
29 
30 static int h_compare_category_name(const void *vtype1, const void *vtype2)
31 {
32 	const int *type1 = vtype1;
33 	const int *type2 = vtype2;
34 	const char *name1 = genimg_get_cat_short_name(cur_category, *type1);
35 	const char *name2 = genimg_get_cat_short_name(cur_category, *type2);
36 
37 	return strcmp(name1, name2);
38 }
39 
40 static int show_valid_options(enum ih_category category)
41 {
42 	int *order;
43 	int count;
44 	int item;
45 	int i;
46 
47 	count = genimg_get_cat_count(category);
48 	order = calloc(count, sizeof(*order));
49 	if (!order)
50 		return -ENOMEM;
51 
52 	/* Sort the names in order of short name for easier reading */
53 	for (item = 0; item < count; item++)
54 		order[item] = item;
55 	cur_category = category;
56 	qsort(order, count, sizeof(int), h_compare_category_name);
57 
58 	fprintf(stderr, "\nInvalid %s, supported are:\n",
59 		genimg_get_cat_desc(category));
60 	for (i = 0; i < count; i++) {
61 		item = order[i];
62 		fprintf(stderr, "\t%-15s  %s\n",
63 			genimg_get_cat_short_name(category, item),
64 			genimg_get_cat_name(category, item));
65 	}
66 	fprintf(stderr, "\n");
67 
68 	return 0;
69 }
70 
71 static void usage(const char *msg)
72 {
73 	fprintf(stderr, "Error: %s\n", msg);
74 	fprintf(stderr, "Usage: %s -l image\n"
75 			 "          -l ==> list image header information\n",
76 		params.cmdname);
77 	fprintf(stderr,
78 		"       %s [-x] -A arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...] image\n"
79 		"          -A ==> set architecture to 'arch'\n"
80 		"          -O ==> set operating system to 'os'\n"
81 		"          -T ==> set image type to 'type'\n"
82 		"          -C ==> set compression type 'comp'\n"
83 		"          -a ==> set load address to 'addr' (hex)\n"
84 		"          -e ==> set entry point to 'ep' (hex)\n"
85 		"          -n ==> set image name to 'name'\n"
86 		"          -d ==> use image data from 'datafile'\n"
87 		"          -x ==> set XIP (execute in place)\n",
88 		params.cmdname);
89 	fprintf(stderr,
90 		"       %s [-D dtc_options] [-f fit-image.its|-f auto|-F] [-b <dtb> [-b <dtb>]] fit-image\n"
91 		"           <dtb> file is used with -f auto, it may occour multiple times.\n",
92 		params.cmdname);
93 	fprintf(stderr,
94 		"          -D => set all options for device tree compiler\n"
95 		"          -f => input filename for FIT source\n");
96 #ifdef CONFIG_FIT_SIGNATURE
97 	fprintf(stderr,
98 		"Signing / verified boot options: [-E] [-k keydir] [-K dtb] [ -c <comment>] [-p addr] [-r]\n"
99 		"          -E => place data outside of the FIT structure\n"
100 		"          -k => set directory containing private keys\n"
101 		"          -K => write public keys to this .dtb file\n"
102 		"          -c => add comment in signature node\n"
103 		"          -F => re-sign existing FIT image\n"
104 		"          -p => place external data at a static position\n"
105 		"          -r => mark keys used as 'required' in dtb\n");
106 #else
107 	fprintf(stderr,
108 		"Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)\n");
109 #endif
110 	fprintf(stderr, "       %s -V ==> print version information and exit\n",
111 		params.cmdname);
112 	fprintf(stderr, "Use -T to see a list of available image types\n");
113 
114 	exit(EXIT_FAILURE);
115 }
116 
117 static int add_content(int type, const char *fname)
118 {
119 	struct content_info *cont;
120 
121 	cont = calloc(1, sizeof(*cont));
122 	if (!cont)
123 		return -1;
124 	cont->type = type;
125 	cont->fname = fname;
126 	if (params.content_tail)
127 		params.content_tail->next = cont;
128 	else
129 		params.content_head = cont;
130 	params.content_tail = cont;
131 
132 	return 0;
133 }
134 
135 static void process_args(int argc, char **argv)
136 {
137 	char *ptr;
138 	int type = IH_TYPE_INVALID;
139 	char *datafile = NULL;
140 	int opt;
141 
142 	while ((opt = getopt(argc, argv,
143 			     "a:A:b:cC:d:D:e:Ef:Fk:K:ln:p:O:rR:qsT:vVx")) != -1) {
144 		switch (opt) {
145 		case 'a':
146 			params.addr = strtoull(optarg, &ptr, 16);
147 			if (*ptr) {
148 				fprintf(stderr, "%s: invalid load address %s\n",
149 					params.cmdname, optarg);
150 				exit(EXIT_FAILURE);
151 			}
152 			break;
153 		case 'A':
154 			params.arch = genimg_get_arch_id(optarg);
155 			if (params.arch < 0) {
156 				show_valid_options(IH_ARCH);
157 				usage("Invalid architecture");
158 			}
159 			break;
160 		case 'b':
161 			if (add_content(IH_TYPE_FLATDT, optarg)) {
162 				fprintf(stderr,
163 					"%s: Out of memory adding content '%s'",
164 					params.cmdname, optarg);
165 				exit(EXIT_FAILURE);
166 			}
167 			break;
168 		case 'c':
169 			params.comment = optarg;
170 			break;
171 		case 'C':
172 			params.comp = genimg_get_comp_id(optarg);
173 			if (params.comp < 0) {
174 				show_valid_options(IH_COMP);
175 				usage("Invalid compression type");
176 			}
177 			break;
178 		case 'd':
179 			params.datafile = optarg;
180 			params.dflag = 1;
181 			break;
182 		case 'D':
183 			params.dtc = optarg;
184 			break;
185 		case 'e':
186 			params.ep = strtoull(optarg, &ptr, 16);
187 			if (*ptr) {
188 				fprintf(stderr, "%s: invalid entry point %s\n",
189 					params.cmdname, optarg);
190 				exit(EXIT_FAILURE);
191 			}
192 			params.eflag = 1;
193 			break;
194 		case 'E':
195 			params.external_data = true;
196 			break;
197 		case 'f':
198 			datafile = optarg;
199 			params.auto_its = !strcmp(datafile, "auto");
200 			/* no break */
201 		case 'F':
202 			/*
203 			 * The flattened image tree (FIT) format
204 			 * requires a flattened device tree image type
205 			 */
206 			params.type = IH_TYPE_FLATDT;
207 			params.fflag = 1;
208 			break;
209 		case 'k':
210 			params.keydir = optarg;
211 			break;
212 		case 'K':
213 			params.keydest = optarg;
214 			break;
215 		case 'l':
216 			params.lflag = 1;
217 			break;
218 		case 'n':
219 			params.imagename = optarg;
220 			break;
221 		case 'O':
222 			params.os = genimg_get_os_id(optarg);
223 			if (params.os < 0) {
224 				show_valid_options(IH_OS);
225 				usage("Invalid operating system");
226 			}
227 			break;
228 		case 'p':
229 			params.external_offset = strtoull(optarg, &ptr, 16);
230 			if (*ptr) {
231 				fprintf(stderr, "%s: invalid offset size %s\n",
232 					params.cmdname, optarg);
233 				exit(EXIT_FAILURE);
234 			}
235 			break;
236 		case 'q':
237 			params.quiet = 1;
238 			break;
239 		case 'r':
240 			params.require_keys = 1;
241 			break;
242 		case 'R':
243 			/*
244 			 * This entry is for the second configuration
245 			 * file, if only one is not enough.
246 			 */
247 			params.imagename2 = optarg;
248 			break;
249 		case 's':
250 			params.skipcpy = 1;
251 			break;
252 		case 'T':
253 			type = genimg_get_type_id(optarg);
254 			if (type < 0) {
255 				show_valid_options(IH_TYPE);
256 				usage("Invalid image type");
257 			}
258 			break;
259 		case 'v':
260 			params.vflag++;
261 			break;
262 		case 'V':
263 			printf("mkimage version %s\n", PLAIN_VERSION);
264 			exit(EXIT_SUCCESS);
265 		case 'x':
266 			params.xflag++;
267 			break;
268 		default:
269 			usage("Invalid option");
270 		}
271 	}
272 
273 	/* The last parameter is expected to be the imagefile */
274 	if (optind < argc)
275 		params.imagefile = argv[optind];
276 
277 	/*
278 	 * For auto-generated FIT images we need to know the image type to put
279 	 * in the FIT, which is separate from the file's image type (which
280 	 * will always be IH_TYPE_FLATDT in this case).
281 	 */
282 	if (params.type == IH_TYPE_FLATDT) {
283 		params.fit_image_type = type ? type : IH_TYPE_KERNEL;
284 		/* For auto_its, datafile is always 'auto' */
285 		if (!params.auto_its)
286 			params.datafile = datafile;
287 		else if (!params.datafile)
288 			usage("Missing data file for auto-FIT (use -d)");
289 	} else if (type != IH_TYPE_INVALID) {
290 		params.type = type;
291 	}
292 
293 	if (!params.imagefile)
294 		usage("Missing output filename");
295 }
296 
297 int main(int argc, char **argv)
298 {
299 	int ifd = -1;
300 	struct stat sbuf;
301 	char *ptr;
302 	int retval = 0;
303 	struct image_type_params *tparams = NULL;
304 	int pad_len = 0;
305 	int dfd;
306 
307 	params.cmdname = *argv;
308 	params.addr = 0;
309 	params.ep = 0;
310 
311 	process_args(argc, argv);
312 
313 	/* set tparams as per input type_id */
314 	tparams = imagetool_get_type(params.type);
315 	if (tparams == NULL) {
316 		fprintf (stderr, "%s: unsupported type %s\n",
317 			params.cmdname, genimg_get_type_name(params.type));
318 		exit (EXIT_FAILURE);
319 	}
320 
321 	/*
322 	 * check the passed arguments parameters meets the requirements
323 	 * as per image type to be generated/listed
324 	 */
325 	if (tparams->check_params)
326 		if (tparams->check_params (&params))
327 			usage("Bad parameters for image type");
328 
329 	if (!params.eflag) {
330 		params.ep = params.addr;
331 		/* If XIP, entry point must be after the U-Boot header */
332 		if (params.xflag)
333 			params.ep += tparams->header_size;
334 	}
335 
336 	if (params.fflag){
337 		if (tparams->fflag_handle)
338 			/*
339 			 * in some cases, some additional processing needs
340 			 * to be done if fflag is defined
341 			 *
342 			 * For ex. fit_handle_file for Fit file support
343 			 */
344 			retval = tparams->fflag_handle(&params);
345 
346 		if (retval != EXIT_SUCCESS)
347 			exit (retval);
348 	}
349 
350 	if (params.lflag || params.fflag) {
351 		ifd = open (params.imagefile, O_RDONLY|O_BINARY);
352 	} else {
353 		ifd = open (params.imagefile,
354 			O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666);
355 	}
356 
357 	if (ifd < 0) {
358 		fprintf (stderr, "%s: Can't open %s: %s\n",
359 			params.cmdname, params.imagefile,
360 			strerror(errno));
361 		exit (EXIT_FAILURE);
362 	}
363 
364 	if (params.lflag || params.fflag) {
365 		/*
366 		 * list header information of existing image
367 		 */
368 		if (fstat(ifd, &sbuf) < 0) {
369 			fprintf (stderr, "%s: Can't stat %s: %s\n",
370 				params.cmdname, params.imagefile,
371 				strerror(errno));
372 			exit (EXIT_FAILURE);
373 		}
374 
375 		if ((unsigned)sbuf.st_size < tparams->header_size) {
376 			fprintf (stderr,
377 				"%s: Bad size: \"%s\" is not valid image\n",
378 				params.cmdname, params.imagefile);
379 			exit (EXIT_FAILURE);
380 		}
381 
382 		ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, ifd, 0);
383 		if (ptr == MAP_FAILED) {
384 			fprintf (stderr, "%s: Can't read %s: %s\n",
385 				params.cmdname, params.imagefile,
386 				strerror(errno));
387 			exit (EXIT_FAILURE);
388 		}
389 
390 		/*
391 		 * scan through mkimage registry for all supported image types
392 		 * and verify the input image file header for match
393 		 * Print the image information for matched image type
394 		 * Returns the error code if not matched
395 		 */
396 		retval = imagetool_verify_print_header(ptr, &sbuf,
397 				tparams, &params);
398 
399 		(void) munmap((void *)ptr, sbuf.st_size);
400 		(void) close (ifd);
401 
402 		exit (retval);
403 	}
404 
405 	if ((params.type != IH_TYPE_MULTI) && (params.type != IH_TYPE_SCRIPT)) {
406 		dfd = open(params.datafile, O_RDONLY | O_BINARY);
407 		if (dfd < 0) {
408 			fprintf(stderr, "%s: Can't open %s: %s\n",
409 				params.cmdname, params.datafile,
410 				strerror(errno));
411 			exit(EXIT_FAILURE);
412 		}
413 
414 		if (fstat(dfd, &sbuf) < 0) {
415 			fprintf(stderr, "%s: Can't stat %s: %s\n",
416 				params.cmdname, params.datafile,
417 				strerror(errno));
418 			exit(EXIT_FAILURE);
419 		}
420 
421 		params.file_size = sbuf.st_size + tparams->header_size;
422 		close(dfd);
423 	}
424 
425 	/*
426 	 * In case there an header with a variable
427 	 * length will be added, the corresponding
428 	 * function is called. This is responsible to
429 	 * allocate memory for the header itself.
430 	 */
431 	if (tparams->vrec_header)
432 		pad_len = tparams->vrec_header(&params, tparams);
433 	else
434 		memset(tparams->hdr, 0, tparams->header_size);
435 
436 	if (write(ifd, tparams->hdr, tparams->header_size)
437 					!= tparams->header_size) {
438 		fprintf (stderr, "%s: Write error on %s: %s\n",
439 			params.cmdname, params.imagefile, strerror(errno));
440 		exit (EXIT_FAILURE);
441 	}
442 
443 	if (!params.skipcpy) {
444 		if (params.type == IH_TYPE_MULTI ||
445 		    params.type == IH_TYPE_SCRIPT) {
446 			char *file = params.datafile;
447 			uint32_t size;
448 
449 			for (;;) {
450 				char *sep = NULL;
451 
452 				if (file) {
453 					if ((sep = strchr(file, ':')) != NULL) {
454 						*sep = '\0';
455 					}
456 
457 					if (stat (file, &sbuf) < 0) {
458 						fprintf (stderr, "%s: Can't stat %s: %s\n",
459 							 params.cmdname, file, strerror(errno));
460 						exit (EXIT_FAILURE);
461 					}
462 					size = cpu_to_uimage (sbuf.st_size);
463 				} else {
464 					size = 0;
465 				}
466 
467 				if (write(ifd, (char *)&size, sizeof(size)) != sizeof(size)) {
468 					fprintf (stderr, "%s: Write error on %s: %s\n",
469 						 params.cmdname, params.imagefile,
470 						 strerror(errno));
471 					exit (EXIT_FAILURE);
472 				}
473 
474 				if (!file) {
475 					break;
476 				}
477 
478 				if (sep) {
479 					*sep = ':';
480 					file = sep + 1;
481 				} else {
482 					file = NULL;
483 				}
484 			}
485 
486 			file = params.datafile;
487 
488 			for (;;) {
489 				char *sep = strchr(file, ':');
490 				if (sep) {
491 					*sep = '\0';
492 					copy_file (ifd, file, 1);
493 					*sep++ = ':';
494 					file = sep;
495 				} else {
496 					copy_file (ifd, file, 0);
497 					break;
498 				}
499 			}
500 		} else if (params.type == IH_TYPE_PBLIMAGE) {
501 			/* PBL has special Image format, implements its' own */
502 			pbl_load_uboot(ifd, &params);
503 		} else {
504 			copy_file(ifd, params.datafile, pad_len);
505 		}
506 	}
507 
508 	/* We're a bit of paranoid */
509 #if defined(_POSIX_SYNCHRONIZED_IO) && \
510    !defined(__sun__) && \
511    !defined(__FreeBSD__) && \
512    !defined(__OpenBSD__) && \
513    !defined(__APPLE__)
514 	(void) fdatasync (ifd);
515 #else
516 	(void) fsync (ifd);
517 #endif
518 
519 	if (fstat(ifd, &sbuf) < 0) {
520 		fprintf (stderr, "%s: Can't stat %s: %s\n",
521 			params.cmdname, params.imagefile, strerror(errno));
522 		exit (EXIT_FAILURE);
523 	}
524 	params.file_size = sbuf.st_size;
525 
526 	ptr = mmap(0, sbuf.st_size, PROT_READ|PROT_WRITE, MAP_SHARED, ifd, 0);
527 	if (ptr == MAP_FAILED) {
528 		fprintf (stderr, "%s: Can't map %s: %s\n",
529 			params.cmdname, params.imagefile, strerror(errno));
530 		exit (EXIT_FAILURE);
531 	}
532 
533 	/* Setup the image header as per input image type*/
534 	if (tparams->set_header)
535 		tparams->set_header (ptr, &sbuf, ifd, &params);
536 	else {
537 		fprintf (stderr, "%s: Can't set header for %s: %s\n",
538 			params.cmdname, tparams->name, strerror(errno));
539 		exit (EXIT_FAILURE);
540 	}
541 
542 	/* Print the image information by processing image header */
543 	if (tparams->print_header)
544 		tparams->print_header (ptr);
545 	else {
546 		fprintf (stderr, "%s: Can't print header for %s: %s\n",
547 			params.cmdname, tparams->name, strerror(errno));
548 		exit (EXIT_FAILURE);
549 	}
550 
551 	(void) munmap((void *)ptr, sbuf.st_size);
552 
553 	/* We're a bit of paranoid */
554 #if defined(_POSIX_SYNCHRONIZED_IO) && \
555    !defined(__sun__) && \
556    !defined(__FreeBSD__) && \
557    !defined(__OpenBSD__) && \
558    !defined(__APPLE__)
559 	(void) fdatasync (ifd);
560 #else
561 	(void) fsync (ifd);
562 #endif
563 
564 	if (close(ifd)) {
565 		fprintf (stderr, "%s: Write error on %s: %s\n",
566 			params.cmdname, params.imagefile, strerror(errno));
567 		exit (EXIT_FAILURE);
568 	}
569 
570 	exit (EXIT_SUCCESS);
571 }
572 
573 static void
574 copy_file (int ifd, const char *datafile, int pad)
575 {
576 	int dfd;
577 	struct stat sbuf;
578 	unsigned char *ptr;
579 	int tail;
580 	int zero = 0;
581 	uint8_t zeros[4096];
582 	int offset = 0;
583 	int size;
584 	struct image_type_params *tparams = imagetool_get_type(params.type);
585 
586 	memset(zeros, 0, sizeof(zeros));
587 
588 	if (params.vflag) {
589 		fprintf (stderr, "Adding Image %s\n", datafile);
590 	}
591 
592 	if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) {
593 		fprintf (stderr, "%s: Can't open %s: %s\n",
594 			params.cmdname, datafile, strerror(errno));
595 		exit (EXIT_FAILURE);
596 	}
597 
598 	if (fstat(dfd, &sbuf) < 0) {
599 		fprintf (stderr, "%s: Can't stat %s: %s\n",
600 			params.cmdname, datafile, strerror(errno));
601 		exit (EXIT_FAILURE);
602 	}
603 
604 	ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0);
605 	if (ptr == MAP_FAILED) {
606 		fprintf (stderr, "%s: Can't read %s: %s\n",
607 			params.cmdname, datafile, strerror(errno));
608 		exit (EXIT_FAILURE);
609 	}
610 
611 	if (params.xflag) {
612 		unsigned char *p = NULL;
613 		/*
614 		 * XIP: do not append the image_header_t at the
615 		 * beginning of the file, but consume the space
616 		 * reserved for it.
617 		 */
618 
619 		if ((unsigned)sbuf.st_size < tparams->header_size) {
620 			fprintf (stderr,
621 				"%s: Bad size: \"%s\" is too small for XIP\n",
622 				params.cmdname, datafile);
623 			exit (EXIT_FAILURE);
624 		}
625 
626 		for (p = ptr; p < ptr + tparams->header_size; p++) {
627 			if ( *p != 0xff ) {
628 				fprintf (stderr,
629 					"%s: Bad file: \"%s\" has invalid buffer for XIP\n",
630 					params.cmdname, datafile);
631 				exit (EXIT_FAILURE);
632 			}
633 		}
634 
635 		offset = tparams->header_size;
636 	}
637 
638 	size = sbuf.st_size - offset;
639 	if (write(ifd, ptr + offset, size) != size) {
640 		fprintf (stderr, "%s: Write error on %s: %s\n",
641 			params.cmdname, params.imagefile, strerror(errno));
642 		exit (EXIT_FAILURE);
643 	}
644 
645 	tail = size % 4;
646 	if ((pad == 1) && (tail != 0)) {
647 
648 		if (write(ifd, (char *)&zero, 4-tail) != 4-tail) {
649 			fprintf (stderr, "%s: Write error on %s: %s\n",
650 				params.cmdname, params.imagefile,
651 				strerror(errno));
652 			exit (EXIT_FAILURE);
653 		}
654 	} else if (pad > 1) {
655 		while (pad > 0) {
656 			int todo = sizeof(zeros);
657 
658 			if (todo > pad)
659 				todo = pad;
660 			if (write(ifd, (char *)&zeros, todo) != todo) {
661 				fprintf(stderr, "%s: Write error on %s: %s\n",
662 					params.cmdname, params.imagefile,
663 					strerror(errno));
664 				exit(EXIT_FAILURE);
665 			}
666 			pad -= todo;
667 		}
668 	}
669 
670 	(void) munmap((void *)ptr, sbuf.st_size);
671 	(void) close (dfd);
672 }
673