1# Configuration file for fw_(printenv/saveenv) utility. 2# Up to two entries are valid, in this case the redundant 3# environment sector is assumed present. 4# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash. 5# Futhermore, if the Flash sector size is ommitted, this value is assumed to 6# be the same as the Environment size, which is valid for NOR and SPI-dataflash 7 8# NOR example 9# MTD device name Device offset Env. size Flash sector size Number of sectors 10/dev/mtd1 0x0000 0x4000 0x4000 11/dev/mtd2 0x0000 0x4000 0x4000 12 13# MTD SPI-dataflash example 14# MTD device name Device offset Env. size Flash sector size Number of sectors 15#/dev/mtd5 0x4200 0x4200 16#/dev/mtd6 0x4200 0x4200 17 18# NAND example 19#/dev/mtd0 0x4000 0x4000 0x20000 2 20