1# SPDX-License-Identifier: GPL-2.0+ 2# Copyright (c) 2016, Google Inc. 3# 4# U-Boot Verified Boot Test 5 6""" 7This tests verified boot in the following ways: 8 9For image verification: 10- Create FIT (unsigned) with mkimage 11- Check that verification shows that no keys are verified 12- Sign image 13- Check that verification shows that a key is now verified 14 15For configuration verification: 16- Corrupt signature and check for failure 17- Create FIT (with unsigned configuration) with mkimage 18- Check that image verification works 19- Sign the FIT and mark the key as 'required' for verification 20- Check that image verification works 21- Corrupt the signature 22- Check that image verification no-longer works 23 24Tests run with both SHA1 and SHA256 hashing. 25""" 26 27import pytest 28import sys 29import struct 30import u_boot_utils as util 31 32@pytest.mark.boardspec('sandbox') 33@pytest.mark.buildconfigspec('fit_signature') 34@pytest.mark.requiredtool('dtc') 35@pytest.mark.requiredtool('fdtget') 36@pytest.mark.requiredtool('fdtput') 37@pytest.mark.requiredtool('openssl') 38def test_vboot(u_boot_console): 39 """Test verified boot signing with mkimage and verification with 'bootm'. 40 41 This works using sandbox only as it needs to update the device tree used 42 by U-Boot to hold public keys from the signing process. 43 44 The SHA1 and SHA256 tests are combined into a single test since the 45 key-generation process is quite slow and we want to avoid doing it twice. 46 """ 47 def dtc(dts): 48 """Run the device tree compiler to compile a .dts file 49 50 The output file will be the same as the input file but with a .dtb 51 extension. 52 53 Args: 54 dts: Device tree file to compile. 55 """ 56 dtb = dts.replace('.dts', '.dtb') 57 util.run_and_log(cons, 'dtc %s %s%s -O dtb ' 58 '-o %s%s' % (dtc_args, datadir, dts, tmpdir, dtb)) 59 60 def run_bootm(sha_algo, test_type, expect_string, boots): 61 """Run a 'bootm' command U-Boot. 62 63 This always starts a fresh U-Boot instance since the device tree may 64 contain a new public key. 65 66 Args: 67 test_type: A string identifying the test type. 68 expect_string: A string which is expected in the output. 69 sha_algo: Either 'sha1' or 'sha256', to select the algorithm to 70 use. 71 boots: A boolean that is True if Linux should boot and False if 72 we are expected to not boot 73 """ 74 cons.restart_uboot() 75 with cons.log.section('Verified boot %s %s' % (sha_algo, test_type)): 76 output = cons.run_command_list( 77 ['sb load hostfs - 100 %stest.fit' % tmpdir, 78 'fdt addr 100', 79 'bootm 100']) 80 assert(expect_string in ''.join(output)) 81 if boots: 82 assert('sandbox: continuing, as we cannot run' in ''.join(output)) 83 84 def make_fit(its): 85 """Make a new FIT from the .its source file. 86 87 This runs 'mkimage -f' to create a new FIT. 88 89 Args: 90 its: Filename containing .its source. 91 """ 92 util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', 93 '%s%s' % (datadir, its), fit]) 94 95 def sign_fit(sha_algo): 96 """Sign the FIT 97 98 Signs the FIT and writes the signature into it. It also writes the 99 public key into the dtb. 100 101 Args: 102 sha_algo: Either 'sha1' or 'sha256', to select the algorithm to 103 use. 104 """ 105 cons.log.action('%s: Sign images' % sha_algo) 106 util.run_and_log(cons, [mkimage, '-F', '-k', tmpdir, '-K', dtb, 107 '-r', fit]) 108 109 def replace_fit_totalsize(size): 110 """Replace FIT header's totalsize with something greater. 111 112 The totalsize must be less than or equal to FIT_SIGNATURE_MAX_SIZE. 113 If the size is greater, the signature verification should return false. 114 115 Args: 116 size: The new totalsize of the header 117 118 Returns: 119 prev_size: The previous totalsize read from the header 120 """ 121 total_size = 0 122 with open(fit, 'r+b') as handle: 123 handle.seek(4) 124 total_size = handle.read(4) 125 handle.seek(4) 126 handle.write(struct.pack(">I", size)) 127 return struct.unpack(">I", total_size)[0] 128 129 def test_with_algo(sha_algo): 130 """Test verified boot with the given hash algorithm. 131 132 This is the main part of the test code. The same procedure is followed 133 for both hashing algorithms. 134 135 Args: 136 sha_algo: Either 'sha1' or 'sha256', to select the algorithm to 137 use. 138 """ 139 # Compile our device tree files for kernel and U-Boot. These are 140 # regenerated here since mkimage will modify them (by adding a 141 # public key) below. 142 dtc('sandbox-kernel.dts') 143 dtc('sandbox-u-boot.dts') 144 145 # Build the FIT, but don't sign anything yet 146 cons.log.action('%s: Test FIT with signed images' % sha_algo) 147 make_fit('sign-images-%s.its' % sha_algo) 148 run_bootm(sha_algo, 'unsigned images', 'dev-', True) 149 150 # Sign images with our dev keys 151 sign_fit(sha_algo) 152 run_bootm(sha_algo, 'signed images', 'dev+', True) 153 154 # Create a fresh .dtb without the public keys 155 dtc('sandbox-u-boot.dts') 156 157 cons.log.action('%s: Test FIT with signed configuration' % sha_algo) 158 make_fit('sign-configs-%s.its' % sha_algo) 159 run_bootm(sha_algo, 'unsigned config', '%s+ OK' % sha_algo, True) 160 161 # Sign images with our dev keys 162 sign_fit(sha_algo) 163 run_bootm(sha_algo, 'signed config', 'dev+', True) 164 165 cons.log.action('%s: Check signed config on the host' % sha_algo) 166 167 util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', tmpdir, 168 '-k', dtb]) 169 170 # Replace header bytes 171 bcfg = u_boot_console.config.buildconfig 172 max_size = int(bcfg.get('config_fit_signature_max_size', 0x10000000), 0) 173 existing_size = replace_fit_totalsize(max_size + 1) 174 run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', False) 175 cons.log.action('%s: Check overflowed FIT header totalsize' % sha_algo) 176 177 # Replace with existing header bytes 178 replace_fit_totalsize(existing_size) 179 run_bootm(sha_algo, 'signed config', 'dev+', True) 180 cons.log.action('%s: Check default FIT header totalsize' % sha_algo) 181 182 # Increment the first byte of the signature, which should cause failure 183 sig = util.run_and_log(cons, 'fdtget -t bx %s %s value' % 184 (fit, sig_node)) 185 byte_list = sig.split() 186 byte = int(byte_list[0], 16) 187 byte_list[0] = '%x' % (byte + 1) 188 sig = ' '.join(byte_list) 189 util.run_and_log(cons, 'fdtput -t bx %s %s value %s' % 190 (fit, sig_node, sig)) 191 192 run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', False) 193 194 cons.log.action('%s: Check bad config on the host' % sha_algo) 195 util.run_and_log_expect_exception(cons, [fit_check_sign, '-f', fit, 196 '-k', dtb], 1, 'Failed to verify required signature') 197 198 cons = u_boot_console 199 tmpdir = cons.config.result_dir + '/' 200 tmp = tmpdir + 'vboot.tmp' 201 datadir = cons.config.source_dir + '/test/py/tests/vboot/' 202 fit = '%stest.fit' % tmpdir 203 mkimage = cons.config.build_dir + '/tools/mkimage' 204 fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign' 205 dtc_args = '-I dts -O dtb -i %s' % tmpdir 206 dtb = '%ssandbox-u-boot.dtb' % tmpdir 207 sig_node = '/configurations/conf@1/signature@1' 208 209 # Create an RSA key pair 210 public_exponent = 65537 211 util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %sdev.key ' 212 '-pkeyopt rsa_keygen_bits:2048 ' 213 '-pkeyopt rsa_keygen_pubexp:%d' % 214 (tmpdir, public_exponent)) 215 216 # Create a certificate containing the public key 217 util.run_and_log(cons, 'openssl req -batch -new -x509 -key %sdev.key -out ' 218 '%sdev.crt' % (tmpdir, tmpdir)) 219 220 # Create a number kernel image with zeroes 221 with open('%stest-kernel.bin' % tmpdir, 'w') as fd: 222 fd.write(5000 * chr(0)) 223 224 try: 225 # We need to use our own device tree file. Remember to restore it 226 # afterwards. 227 old_dtb = cons.config.dtb 228 cons.config.dtb = dtb 229 test_with_algo('sha1') 230 test_with_algo('sha256') 231 finally: 232 # Go back to the original U-Boot with the correct dtb. 233 cons.config.dtb = old_dtb 234 cons.restart_uboot() 235