1 #ifndef LIBFDT_H 2 #define LIBFDT_H 3 /* 4 * libfdt - Flat Device Tree manipulation 5 * Copyright (C) 2006 David Gibson, IBM Corporation. 6 * 7 * libfdt is dual licensed: you can use it either under the terms of 8 * the GPL, or the BSD license, at your option. 9 * 10 * a) This library is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of the 13 * License, or (at your option) any later version. 14 * 15 * This library is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public 21 * License along with this library; if not, write to the Free 22 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 23 * MA 02110-1301 USA 24 * 25 * Alternatively, 26 * 27 * b) Redistribution and use in source and binary forms, with or 28 * without modification, are permitted provided that the following 29 * conditions are met: 30 * 31 * 1. Redistributions of source code must retain the above 32 * copyright notice, this list of conditions and the following 33 * disclaimer. 34 * 2. Redistributions in binary form must reproduce the above 35 * copyright notice, this list of conditions and the following 36 * disclaimer in the documentation and/or other materials 37 * provided with the distribution. 38 * 39 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 40 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 41 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 42 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 43 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 44 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 46 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 47 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 49 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 50 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 51 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 52 */ 53 54 #include "libfdt_env.h" 55 #include "fdt.h" 56 57 #define FDT_FIRST_SUPPORTED_VERSION 0x02 58 #define FDT_LAST_SUPPORTED_VERSION 0x11 59 60 /* Error codes: informative error codes */ 61 #define FDT_ERR_NOTFOUND 1 62 /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ 63 #define FDT_ERR_EXISTS 2 64 /* FDT_ERR_EXISTS: Attempted to create a node or property which 65 * already exists */ 66 #define FDT_ERR_NOSPACE 3 67 /* FDT_ERR_NOSPACE: Operation needed to expand the device 68 * tree, but its buffer did not have sufficient space to 69 * contain the expanded tree. Use fdt_open_into() to move the 70 * device tree to a buffer with more space. */ 71 72 /* Error codes: codes for bad parameters */ 73 #define FDT_ERR_BADOFFSET 4 74 /* FDT_ERR_BADOFFSET: Function was passed a structure block 75 * offset which is out-of-bounds, or which points to an 76 * unsuitable part of the structure for the operation. */ 77 #define FDT_ERR_BADPATH 5 78 /* FDT_ERR_BADPATH: Function was passed a badly formatted path 79 * (e.g. missing a leading / for a function which requires an 80 * absolute path) */ 81 #define FDT_ERR_BADPHANDLE 6 82 /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. 83 * This can be caused either by an invalid phandle property 84 * length, or the phandle value was either 0 or -1, which are 85 * not permitted. */ 86 #define FDT_ERR_BADSTATE 7 87 /* FDT_ERR_BADSTATE: Function was passed an incomplete device 88 * tree created by the sequential-write functions, which is 89 * not sufficiently complete for the requested operation. */ 90 91 /* Error codes: codes for bad device tree blobs */ 92 #define FDT_ERR_TRUNCATED 8 93 /* FDT_ERR_TRUNCATED: Structure block of the given device tree 94 * ends without an FDT_END tag. */ 95 #define FDT_ERR_BADMAGIC 9 96 /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a 97 * device tree at all - it is missing the flattened device 98 * tree magic number. */ 99 #define FDT_ERR_BADVERSION 10 100 /* FDT_ERR_BADVERSION: Given device tree has a version which 101 * can't be handled by the requested operation. For 102 * read-write functions, this may mean that fdt_open_into() is 103 * required to convert the tree to the expected version. */ 104 #define FDT_ERR_BADSTRUCTURE 11 105 /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt 106 * structure block or other serious error (e.g. misnested 107 * nodes, or subnodes preceding properties). */ 108 #define FDT_ERR_BADLAYOUT 12 109 /* FDT_ERR_BADLAYOUT: For read-write functions, the given 110 * device tree has it's sub-blocks in an order that the 111 * function can't handle (memory reserve map, then structure, 112 * then strings). Use fdt_open_into() to reorganize the tree 113 * into a form suitable for the read-write operations. */ 114 115 /* "Can't happen" error indicating a bug in libfdt */ 116 #define FDT_ERR_INTERNAL 13 117 /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. 118 * Should never be returned, if it is, it indicates a bug in 119 * libfdt itself. */ 120 121 /* Errors in device tree content */ 122 #define FDT_ERR_BADNCELLS 14 123 /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells 124 * or similar property with a bad format or value */ 125 126 #define FDT_ERR_BADVALUE 15 127 /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected 128 * value. For example: a property expected to contain a string list 129 * is not NUL-terminated within the length of its value. */ 130 131 #define FDT_ERR_BADOVERLAY 16 132 /* FDT_ERR_BADOVERLAY: The device tree overlay, while 133 * correctly structured, cannot be applied due to some 134 * unexpected or missing value, property or node. */ 135 136 #define FDT_ERR_NOPHANDLES 17 137 /* FDT_ERR_NOPHANDLES: The device tree doesn't have any 138 * phandle available anymore without causing an overflow */ 139 140 #define FDT_ERR_MAX 17 141 142 /**********************************************************************/ 143 /* Low-level functions (you probably don't need these) */ 144 /**********************************************************************/ 145 146 #ifndef SWIG /* This function is not useful in Python */ 147 const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); 148 #endif 149 static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) 150 { 151 return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); 152 } 153 154 uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); 155 156 /**********************************************************************/ 157 /* Traversal functions */ 158 /**********************************************************************/ 159 160 int fdt_next_node(const void *fdt, int offset, int *depth); 161 162 /** 163 * fdt_first_subnode() - get offset of first direct subnode 164 * 165 * @fdt: FDT blob 166 * @offset: Offset of node to check 167 * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none 168 */ 169 int fdt_first_subnode(const void *fdt, int offset); 170 171 /** 172 * fdt_next_subnode() - get offset of next direct subnode 173 * 174 * After first calling fdt_first_subnode(), call this function repeatedly to 175 * get direct subnodes of a parent node. 176 * 177 * @fdt: FDT blob 178 * @offset: Offset of previous subnode 179 * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more 180 * subnodes 181 */ 182 int fdt_next_subnode(const void *fdt, int offset); 183 184 /** 185 * fdt_for_each_subnode - iterate over all subnodes of a parent 186 * 187 * @node: child node (int, lvalue) 188 * @fdt: FDT blob (const void *) 189 * @parent: parent node (int) 190 * 191 * This is actually a wrapper around a for loop and would be used like so: 192 * 193 * fdt_for_each_subnode(node, fdt, parent) { 194 * Use node 195 * ... 196 * } 197 * 198 * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) { 199 * Error handling 200 * } 201 * 202 * Note that this is implemented as a macro and @node is used as 203 * iterator in the loop. The parent variable be constant or even a 204 * literal. 205 * 206 */ 207 #define fdt_for_each_subnode(node, fdt, parent) \ 208 for (node = fdt_first_subnode(fdt, parent); \ 209 node >= 0; \ 210 node = fdt_next_subnode(fdt, node)) 211 212 /**********************************************************************/ 213 /* General functions */ 214 /**********************************************************************/ 215 #define fdt_get_header(fdt, field) \ 216 (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) 217 #define fdt_magic(fdt) (fdt_get_header(fdt, magic)) 218 #define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) 219 #define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) 220 #define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) 221 #define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) 222 #define fdt_version(fdt) (fdt_get_header(fdt, version)) 223 #define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) 224 #define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) 225 #define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) 226 #define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) 227 228 #define fdt_set_hdr_(name) \ 229 static inline void fdt_set_##name(void *fdt, uint32_t val) \ 230 { \ 231 struct fdt_header *fdth = (struct fdt_header *)fdt; \ 232 fdth->name = cpu_to_fdt32(val); \ 233 } 234 fdt_set_hdr_(magic); 235 fdt_set_hdr_(totalsize); 236 fdt_set_hdr_(off_dt_struct); 237 fdt_set_hdr_(off_dt_strings); 238 fdt_set_hdr_(off_mem_rsvmap); 239 fdt_set_hdr_(version); 240 fdt_set_hdr_(last_comp_version); 241 fdt_set_hdr_(boot_cpuid_phys); 242 fdt_set_hdr_(size_dt_strings); 243 fdt_set_hdr_(size_dt_struct); 244 #undef fdt_set_hdr_ 245 246 /** 247 * fdt_check_header - sanity check a device tree or possible device tree 248 * @fdt: pointer to data which might be a flattened device tree 249 * 250 * fdt_check_header() checks that the given buffer contains what 251 * appears to be a flattened device tree with sane information in its 252 * header. 253 * 254 * returns: 255 * 0, if the buffer appears to contain a valid device tree 256 * -FDT_ERR_BADMAGIC, 257 * -FDT_ERR_BADVERSION, 258 * -FDT_ERR_BADSTATE, standard meanings, as above 259 */ 260 int fdt_check_header(const void *fdt); 261 262 /** 263 * fdt_move - move a device tree around in memory 264 * @fdt: pointer to the device tree to move 265 * @buf: pointer to memory where the device is to be moved 266 * @bufsize: size of the memory space at buf 267 * 268 * fdt_move() relocates, if possible, the device tree blob located at 269 * fdt to the buffer at buf of size bufsize. The buffer may overlap 270 * with the existing device tree blob at fdt. Therefore, 271 * fdt_move(fdt, fdt, fdt_totalsize(fdt)) 272 * should always succeed. 273 * 274 * returns: 275 * 0, on success 276 * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree 277 * -FDT_ERR_BADMAGIC, 278 * -FDT_ERR_BADVERSION, 279 * -FDT_ERR_BADSTATE, standard meanings 280 */ 281 int fdt_move(const void *fdt, void *buf, int bufsize); 282 283 /**********************************************************************/ 284 /* Read-only functions */ 285 /**********************************************************************/ 286 287 /** 288 * fdt_string - retrieve a string from the strings block of a device tree 289 * @fdt: pointer to the device tree blob 290 * @stroffset: offset of the string within the strings block (native endian) 291 * 292 * fdt_string() retrieves a pointer to a single string from the 293 * strings block of the device tree blob at fdt. 294 * 295 * returns: 296 * a pointer to the string, on success 297 * NULL, if stroffset is out of bounds 298 */ 299 const char *fdt_string(const void *fdt, int stroffset); 300 301 /** 302 * fdt_get_max_phandle - retrieves the highest phandle in a tree 303 * @fdt: pointer to the device tree blob 304 * 305 * fdt_get_max_phandle retrieves the highest phandle in the given 306 * device tree. This will ignore badly formatted phandles, or phandles 307 * with a value of 0 or -1. 308 * 309 * returns: 310 * the highest phandle on success 311 * 0, if no phandle was found in the device tree 312 * -1, if an error occurred 313 */ 314 uint32_t fdt_get_max_phandle(const void *fdt); 315 316 /** 317 * fdt_num_mem_rsv - retrieve the number of memory reserve map entries 318 * @fdt: pointer to the device tree blob 319 * 320 * Returns the number of entries in the device tree blob's memory 321 * reservation map. This does not include the terminating 0,0 entry 322 * or any other (0,0) entries reserved for expansion. 323 * 324 * returns: 325 * the number of entries 326 */ 327 int fdt_num_mem_rsv(const void *fdt); 328 329 /** 330 * fdt_get_mem_rsv - retrieve one memory reserve map entry 331 * @fdt: pointer to the device tree blob 332 * @address, @size: pointers to 64-bit variables 333 * 334 * On success, *address and *size will contain the address and size of 335 * the n-th reserve map entry from the device tree blob, in 336 * native-endian format. 337 * 338 * returns: 339 * 0, on success 340 * -FDT_ERR_BADMAGIC, 341 * -FDT_ERR_BADVERSION, 342 * -FDT_ERR_BADSTATE, standard meanings 343 */ 344 int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); 345 346 /** 347 * fdt_subnode_offset_namelen - find a subnode based on substring 348 * @fdt: pointer to the device tree blob 349 * @parentoffset: structure block offset of a node 350 * @name: name of the subnode to locate 351 * @namelen: number of characters of name to consider 352 * 353 * Identical to fdt_subnode_offset(), but only examine the first 354 * namelen characters of name for matching the subnode name. This is 355 * useful for finding subnodes based on a portion of a larger string, 356 * such as a full path. 357 */ 358 #ifndef SWIG /* Not available in Python */ 359 int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, 360 const char *name, int namelen); 361 #endif 362 /** 363 * fdt_subnode_offset - find a subnode of a given node 364 * @fdt: pointer to the device tree blob 365 * @parentoffset: structure block offset of a node 366 * @name: name of the subnode to locate 367 * 368 * fdt_subnode_offset() finds a subnode of the node at structure block 369 * offset parentoffset with the given name. name may include a unit 370 * address, in which case fdt_subnode_offset() will find the subnode 371 * with that unit address, or the unit address may be omitted, in 372 * which case fdt_subnode_offset() will find an arbitrary subnode 373 * whose name excluding unit address matches the given name. 374 * 375 * returns: 376 * structure block offset of the requested subnode (>=0), on success 377 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist 378 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE 379 * tag 380 * -FDT_ERR_BADMAGIC, 381 * -FDT_ERR_BADVERSION, 382 * -FDT_ERR_BADSTATE, 383 * -FDT_ERR_BADSTRUCTURE, 384 * -FDT_ERR_TRUNCATED, standard meanings. 385 */ 386 int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); 387 388 /** 389 * fdt_path_offset_namelen - find a tree node by its full path 390 * @fdt: pointer to the device tree blob 391 * @path: full path of the node to locate 392 * @namelen: number of characters of path to consider 393 * 394 * Identical to fdt_path_offset(), but only consider the first namelen 395 * characters of path as the path name. 396 */ 397 #ifndef SWIG /* Not available in Python */ 398 int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); 399 #endif 400 401 /** 402 * fdt_path_offset - find a tree node by its full path 403 * @fdt: pointer to the device tree blob 404 * @path: full path of the node to locate 405 * 406 * fdt_path_offset() finds a node of a given path in the device tree. 407 * Each path component may omit the unit address portion, but the 408 * results of this are undefined if any such path component is 409 * ambiguous (that is if there are multiple nodes at the relevant 410 * level matching the given component, differentiated only by unit 411 * address). 412 * 413 * returns: 414 * structure block offset of the node with the requested path (>=0), on 415 * success 416 * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid 417 * -FDT_ERR_NOTFOUND, if the requested node does not exist 418 * -FDT_ERR_BADMAGIC, 419 * -FDT_ERR_BADVERSION, 420 * -FDT_ERR_BADSTATE, 421 * -FDT_ERR_BADSTRUCTURE, 422 * -FDT_ERR_TRUNCATED, standard meanings. 423 */ 424 int fdt_path_offset(const void *fdt, const char *path); 425 426 /** 427 * fdt_get_name - retrieve the name of a given node 428 * @fdt: pointer to the device tree blob 429 * @nodeoffset: structure block offset of the starting node 430 * @lenp: pointer to an integer variable (will be overwritten) or NULL 431 * 432 * fdt_get_name() retrieves the name (including unit address) of the 433 * device tree node at structure block offset nodeoffset. If lenp is 434 * non-NULL, the length of this name is also returned, in the integer 435 * pointed to by lenp. 436 * 437 * returns: 438 * pointer to the node's name, on success 439 * If lenp is non-NULL, *lenp contains the length of that name 440 * (>=0) 441 * NULL, on error 442 * if lenp is non-NULL *lenp contains an error code (<0): 443 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 444 * tag 445 * -FDT_ERR_BADMAGIC, 446 * -FDT_ERR_BADVERSION, 447 * -FDT_ERR_BADSTATE, standard meanings 448 */ 449 const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); 450 451 /** 452 * fdt_first_property_offset - find the offset of a node's first property 453 * @fdt: pointer to the device tree blob 454 * @nodeoffset: structure block offset of a node 455 * 456 * fdt_first_property_offset() finds the first property of the node at 457 * the given structure block offset. 458 * 459 * returns: 460 * structure block offset of the property (>=0), on success 461 * -FDT_ERR_NOTFOUND, if the requested node has no properties 462 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag 463 * -FDT_ERR_BADMAGIC, 464 * -FDT_ERR_BADVERSION, 465 * -FDT_ERR_BADSTATE, 466 * -FDT_ERR_BADSTRUCTURE, 467 * -FDT_ERR_TRUNCATED, standard meanings. 468 */ 469 int fdt_first_property_offset(const void *fdt, int nodeoffset); 470 471 /** 472 * fdt_next_property_offset - step through a node's properties 473 * @fdt: pointer to the device tree blob 474 * @offset: structure block offset of a property 475 * 476 * fdt_next_property_offset() finds the property immediately after the 477 * one at the given structure block offset. This will be a property 478 * of the same node as the given property. 479 * 480 * returns: 481 * structure block offset of the next property (>=0), on success 482 * -FDT_ERR_NOTFOUND, if the given property is the last in its node 483 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag 484 * -FDT_ERR_BADMAGIC, 485 * -FDT_ERR_BADVERSION, 486 * -FDT_ERR_BADSTATE, 487 * -FDT_ERR_BADSTRUCTURE, 488 * -FDT_ERR_TRUNCATED, standard meanings. 489 */ 490 int fdt_next_property_offset(const void *fdt, int offset); 491 492 /** 493 * fdt_for_each_property_offset - iterate over all properties of a node 494 * 495 * @property_offset: property offset (int, lvalue) 496 * @fdt: FDT blob (const void *) 497 * @node: node offset (int) 498 * 499 * This is actually a wrapper around a for loop and would be used like so: 500 * 501 * fdt_for_each_property_offset(property, fdt, node) { 502 * Use property 503 * ... 504 * } 505 * 506 * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) { 507 * Error handling 508 * } 509 * 510 * Note that this is implemented as a macro and property is used as 511 * iterator in the loop. The node variable can be constant or even a 512 * literal. 513 */ 514 #define fdt_for_each_property_offset(property, fdt, node) \ 515 for (property = fdt_first_property_offset(fdt, node); \ 516 property >= 0; \ 517 property = fdt_next_property_offset(fdt, property)) 518 519 /** 520 * fdt_get_property_by_offset - retrieve the property at a given offset 521 * @fdt: pointer to the device tree blob 522 * @offset: offset of the property to retrieve 523 * @lenp: pointer to an integer variable (will be overwritten) or NULL 524 * 525 * fdt_get_property_by_offset() retrieves a pointer to the 526 * fdt_property structure within the device tree blob at the given 527 * offset. If lenp is non-NULL, the length of the property value is 528 * also returned, in the integer pointed to by lenp. 529 * 530 * Note that this code only works on device tree versions >= 16. fdt_getprop() 531 * works on all versions. 532 * 533 * returns: 534 * pointer to the structure representing the property 535 * if lenp is non-NULL, *lenp contains the length of the property 536 * value (>=0) 537 * NULL, on error 538 * if lenp is non-NULL, *lenp contains an error code (<0): 539 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag 540 * -FDT_ERR_BADMAGIC, 541 * -FDT_ERR_BADVERSION, 542 * -FDT_ERR_BADSTATE, 543 * -FDT_ERR_BADSTRUCTURE, 544 * -FDT_ERR_TRUNCATED, standard meanings 545 */ 546 const struct fdt_property *fdt_get_property_by_offset(const void *fdt, 547 int offset, 548 int *lenp); 549 550 /** 551 * fdt_get_property_namelen - find a property based on substring 552 * @fdt: pointer to the device tree blob 553 * @nodeoffset: offset of the node whose property to find 554 * @name: name of the property to find 555 * @namelen: number of characters of name to consider 556 * @lenp: pointer to an integer variable (will be overwritten) or NULL 557 * 558 * Identical to fdt_get_property(), but only examine the first namelen 559 * characters of name for matching the property name. 560 */ 561 #ifndef SWIG /* Not available in Python */ 562 const struct fdt_property *fdt_get_property_namelen(const void *fdt, 563 int nodeoffset, 564 const char *name, 565 int namelen, int *lenp); 566 #endif 567 568 /** 569 * fdt_get_property - find a given property in a given node 570 * @fdt: pointer to the device tree blob 571 * @nodeoffset: offset of the node whose property to find 572 * @name: name of the property to find 573 * @lenp: pointer to an integer variable (will be overwritten) or NULL 574 * 575 * fdt_get_property() retrieves a pointer to the fdt_property 576 * structure within the device tree blob corresponding to the property 577 * named 'name' of the node at offset nodeoffset. If lenp is 578 * non-NULL, the length of the property value is also returned, in the 579 * integer pointed to by lenp. 580 * 581 * returns: 582 * pointer to the structure representing the property 583 * if lenp is non-NULL, *lenp contains the length of the property 584 * value (>=0) 585 * NULL, on error 586 * if lenp is non-NULL, *lenp contains an error code (<0): 587 * -FDT_ERR_NOTFOUND, node does not have named property 588 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 589 * tag 590 * -FDT_ERR_BADMAGIC, 591 * -FDT_ERR_BADVERSION, 592 * -FDT_ERR_BADSTATE, 593 * -FDT_ERR_BADSTRUCTURE, 594 * -FDT_ERR_TRUNCATED, standard meanings 595 */ 596 const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, 597 const char *name, int *lenp); 598 static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, 599 const char *name, 600 int *lenp) 601 { 602 return (struct fdt_property *)(uintptr_t) 603 fdt_get_property(fdt, nodeoffset, name, lenp); 604 } 605 606 /** 607 * fdt_getprop_by_offset - retrieve the value of a property at a given offset 608 * @fdt: pointer to the device tree blob 609 * @ffset: offset of the property to read 610 * @namep: pointer to a string variable (will be overwritten) or NULL 611 * @lenp: pointer to an integer variable (will be overwritten) or NULL 612 * 613 * fdt_getprop_by_offset() retrieves a pointer to the value of the 614 * property at structure block offset 'offset' (this will be a pointer 615 * to within the device blob itself, not a copy of the value). If 616 * lenp is non-NULL, the length of the property value is also 617 * returned, in the integer pointed to by lenp. If namep is non-NULL, 618 * the property's namne will also be returned in the char * pointed to 619 * by namep (this will be a pointer to within the device tree's string 620 * block, not a new copy of the name). 621 * 622 * returns: 623 * pointer to the property's value 624 * if lenp is non-NULL, *lenp contains the length of the property 625 * value (>=0) 626 * if namep is non-NULL *namep contiains a pointer to the property 627 * name. 628 * NULL, on error 629 * if lenp is non-NULL, *lenp contains an error code (<0): 630 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag 631 * -FDT_ERR_BADMAGIC, 632 * -FDT_ERR_BADVERSION, 633 * -FDT_ERR_BADSTATE, 634 * -FDT_ERR_BADSTRUCTURE, 635 * -FDT_ERR_TRUNCATED, standard meanings 636 */ 637 #ifndef SWIG /* This function is not useful in Python */ 638 const void *fdt_getprop_by_offset(const void *fdt, int offset, 639 const char **namep, int *lenp); 640 #endif 641 642 /** 643 * fdt_getprop_namelen - get property value based on substring 644 * @fdt: pointer to the device tree blob 645 * @nodeoffset: offset of the node whose property to find 646 * @name: name of the property to find 647 * @namelen: number of characters of name to consider 648 * @lenp: pointer to an integer variable (will be overwritten) or NULL 649 * 650 * Identical to fdt_getprop(), but only examine the first namelen 651 * characters of name for matching the property name. 652 */ 653 #ifndef SWIG /* Not available in Python */ 654 const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, 655 const char *name, int namelen, int *lenp); 656 static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, 657 const char *name, int namelen, 658 int *lenp) 659 { 660 return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, 661 namelen, lenp); 662 } 663 #endif 664 665 /** 666 * fdt_getprop - retrieve the value of a given property 667 * @fdt: pointer to the device tree blob 668 * @nodeoffset: offset of the node whose property to find 669 * @name: name of the property to find 670 * @lenp: pointer to an integer variable (will be overwritten) or NULL 671 * 672 * fdt_getprop() retrieves a pointer to the value of the property 673 * named 'name' of the node at offset nodeoffset (this will be a 674 * pointer to within the device blob itself, not a copy of the value). 675 * If lenp is non-NULL, the length of the property value is also 676 * returned, in the integer pointed to by lenp. 677 * 678 * returns: 679 * pointer to the property's value 680 * if lenp is non-NULL, *lenp contains the length of the property 681 * value (>=0) 682 * NULL, on error 683 * if lenp is non-NULL, *lenp contains an error code (<0): 684 * -FDT_ERR_NOTFOUND, node does not have named property 685 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 686 * tag 687 * -FDT_ERR_BADMAGIC, 688 * -FDT_ERR_BADVERSION, 689 * -FDT_ERR_BADSTATE, 690 * -FDT_ERR_BADSTRUCTURE, 691 * -FDT_ERR_TRUNCATED, standard meanings 692 */ 693 const void *fdt_getprop(const void *fdt, int nodeoffset, 694 const char *name, int *lenp); 695 static inline void *fdt_getprop_w(void *fdt, int nodeoffset, 696 const char *name, int *lenp) 697 { 698 return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); 699 } 700 701 /** 702 * fdt_get_phandle - retrieve the phandle of a given node 703 * @fdt: pointer to the device tree blob 704 * @nodeoffset: structure block offset of the node 705 * 706 * fdt_get_phandle() retrieves the phandle of the device tree node at 707 * structure block offset nodeoffset. 708 * 709 * returns: 710 * the phandle of the node at nodeoffset, on success (!= 0, != -1) 711 * 0, if the node has no phandle, or another error occurs 712 */ 713 uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); 714 715 /** 716 * fdt_get_alias_namelen - get alias based on substring 717 * @fdt: pointer to the device tree blob 718 * @name: name of the alias th look up 719 * @namelen: number of characters of name to consider 720 * 721 * Identical to fdt_get_alias(), but only examine the first namelen 722 * characters of name for matching the alias name. 723 */ 724 #ifndef SWIG /* Not available in Python */ 725 const char *fdt_get_alias_namelen(const void *fdt, 726 const char *name, int namelen); 727 #endif 728 729 /** 730 * fdt_get_alias - retrieve the path referenced by a given alias 731 * @fdt: pointer to the device tree blob 732 * @name: name of the alias th look up 733 * 734 * fdt_get_alias() retrieves the value of a given alias. That is, the 735 * value of the property named 'name' in the node /aliases. 736 * 737 * returns: 738 * a pointer to the expansion of the alias named 'name', if it exists 739 * NULL, if the given alias or the /aliases node does not exist 740 */ 741 const char *fdt_get_alias(const void *fdt, const char *name); 742 743 /** 744 * fdt_get_path - determine the full path of a node 745 * @fdt: pointer to the device tree blob 746 * @nodeoffset: offset of the node whose path to find 747 * @buf: character buffer to contain the returned path (will be overwritten) 748 * @buflen: size of the character buffer at buf 749 * 750 * fdt_get_path() computes the full path of the node at offset 751 * nodeoffset, and records that path in the buffer at buf. 752 * 753 * NOTE: This function is expensive, as it must scan the device tree 754 * structure from the start to nodeoffset. 755 * 756 * returns: 757 * 0, on success 758 * buf contains the absolute path of the node at 759 * nodeoffset, as a NUL-terminated string. 760 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 761 * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) 762 * characters and will not fit in the given buffer. 763 * -FDT_ERR_BADMAGIC, 764 * -FDT_ERR_BADVERSION, 765 * -FDT_ERR_BADSTATE, 766 * -FDT_ERR_BADSTRUCTURE, standard meanings 767 */ 768 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); 769 770 /** 771 * fdt_supernode_atdepth_offset - find a specific ancestor of a node 772 * @fdt: pointer to the device tree blob 773 * @nodeoffset: offset of the node whose parent to find 774 * @supernodedepth: depth of the ancestor to find 775 * @nodedepth: pointer to an integer variable (will be overwritten) or NULL 776 * 777 * fdt_supernode_atdepth_offset() finds an ancestor of the given node 778 * at a specific depth from the root (where the root itself has depth 779 * 0, its immediate subnodes depth 1 and so forth). So 780 * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); 781 * will always return 0, the offset of the root node. If the node at 782 * nodeoffset has depth D, then: 783 * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); 784 * will return nodeoffset itself. 785 * 786 * NOTE: This function is expensive, as it must scan the device tree 787 * structure from the start to nodeoffset. 788 * 789 * returns: 790 * structure block offset of the node at node offset's ancestor 791 * of depth supernodedepth (>=0), on success 792 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 793 * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of 794 * nodeoffset 795 * -FDT_ERR_BADMAGIC, 796 * -FDT_ERR_BADVERSION, 797 * -FDT_ERR_BADSTATE, 798 * -FDT_ERR_BADSTRUCTURE, standard meanings 799 */ 800 int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, 801 int supernodedepth, int *nodedepth); 802 803 /** 804 * fdt_node_depth - find the depth of a given node 805 * @fdt: pointer to the device tree blob 806 * @nodeoffset: offset of the node whose parent to find 807 * 808 * fdt_node_depth() finds the depth of a given node. The root node 809 * has depth 0, its immediate subnodes depth 1 and so forth. 810 * 811 * NOTE: This function is expensive, as it must scan the device tree 812 * structure from the start to nodeoffset. 813 * 814 * returns: 815 * depth of the node at nodeoffset (>=0), on success 816 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 817 * -FDT_ERR_BADMAGIC, 818 * -FDT_ERR_BADVERSION, 819 * -FDT_ERR_BADSTATE, 820 * -FDT_ERR_BADSTRUCTURE, standard meanings 821 */ 822 int fdt_node_depth(const void *fdt, int nodeoffset); 823 824 /** 825 * fdt_parent_offset - find the parent of a given node 826 * @fdt: pointer to the device tree blob 827 * @nodeoffset: offset of the node whose parent to find 828 * 829 * fdt_parent_offset() locates the parent node of a given node (that 830 * is, it finds the offset of the node which contains the node at 831 * nodeoffset as a subnode). 832 * 833 * NOTE: This function is expensive, as it must scan the device tree 834 * structure from the start to nodeoffset, *twice*. 835 * 836 * returns: 837 * structure block offset of the parent of the node at nodeoffset 838 * (>=0), on success 839 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 840 * -FDT_ERR_BADMAGIC, 841 * -FDT_ERR_BADVERSION, 842 * -FDT_ERR_BADSTATE, 843 * -FDT_ERR_BADSTRUCTURE, standard meanings 844 */ 845 int fdt_parent_offset(const void *fdt, int nodeoffset); 846 847 /** 848 * fdt_node_offset_by_prop_value - find nodes with a given property value 849 * @fdt: pointer to the device tree blob 850 * @startoffset: only find nodes after this offset 851 * @propname: property name to check 852 * @propval: property value to search for 853 * @proplen: length of the value in propval 854 * 855 * fdt_node_offset_by_prop_value() returns the offset of the first 856 * node after startoffset, which has a property named propname whose 857 * value is of length proplen and has value equal to propval; or if 858 * startoffset is -1, the very first such node in the tree. 859 * 860 * To iterate through all nodes matching the criterion, the following 861 * idiom can be used: 862 * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, 863 * propval, proplen); 864 * while (offset != -FDT_ERR_NOTFOUND) { 865 * // other code here 866 * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, 867 * propval, proplen); 868 * } 869 * 870 * Note the -1 in the first call to the function, if 0 is used here 871 * instead, the function will never locate the root node, even if it 872 * matches the criterion. 873 * 874 * returns: 875 * structure block offset of the located node (>= 0, >startoffset), 876 * on success 877 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the 878 * tree after startoffset 879 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 880 * -FDT_ERR_BADMAGIC, 881 * -FDT_ERR_BADVERSION, 882 * -FDT_ERR_BADSTATE, 883 * -FDT_ERR_BADSTRUCTURE, standard meanings 884 */ 885 int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, 886 const char *propname, 887 const void *propval, int proplen); 888 889 /** 890 * fdt_node_offset_by_phandle - find the node with a given phandle 891 * @fdt: pointer to the device tree blob 892 * @phandle: phandle value 893 * 894 * fdt_node_offset_by_phandle() returns the offset of the node 895 * which has the given phandle value. If there is more than one node 896 * in the tree with the given phandle (an invalid tree), results are 897 * undefined. 898 * 899 * returns: 900 * structure block offset of the located node (>= 0), on success 901 * -FDT_ERR_NOTFOUND, no node with that phandle exists 902 * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) 903 * -FDT_ERR_BADMAGIC, 904 * -FDT_ERR_BADVERSION, 905 * -FDT_ERR_BADSTATE, 906 * -FDT_ERR_BADSTRUCTURE, standard meanings 907 */ 908 int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); 909 910 /** 911 * fdt_node_check_compatible: check a node's compatible property 912 * @fdt: pointer to the device tree blob 913 * @nodeoffset: offset of a tree node 914 * @compatible: string to match against 915 * 916 * 917 * fdt_node_check_compatible() returns 0 if the given node contains a 918 * 'compatible' property with the given string as one of its elements, 919 * it returns non-zero otherwise, or on error. 920 * 921 * returns: 922 * 0, if the node has a 'compatible' property listing the given string 923 * 1, if the node has a 'compatible' property, but it does not list 924 * the given string 925 * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property 926 * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag 927 * -FDT_ERR_BADMAGIC, 928 * -FDT_ERR_BADVERSION, 929 * -FDT_ERR_BADSTATE, 930 * -FDT_ERR_BADSTRUCTURE, standard meanings 931 */ 932 int fdt_node_check_compatible(const void *fdt, int nodeoffset, 933 const char *compatible); 934 935 /** 936 * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value 937 * @fdt: pointer to the device tree blob 938 * @startoffset: only find nodes after this offset 939 * @compatible: 'compatible' string to match against 940 * 941 * fdt_node_offset_by_compatible() returns the offset of the first 942 * node after startoffset, which has a 'compatible' property which 943 * lists the given compatible string; or if startoffset is -1, the 944 * very first such node in the tree. 945 * 946 * To iterate through all nodes matching the criterion, the following 947 * idiom can be used: 948 * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); 949 * while (offset != -FDT_ERR_NOTFOUND) { 950 * // other code here 951 * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); 952 * } 953 * 954 * Note the -1 in the first call to the function, if 0 is used here 955 * instead, the function will never locate the root node, even if it 956 * matches the criterion. 957 * 958 * returns: 959 * structure block offset of the located node (>= 0, >startoffset), 960 * on success 961 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the 962 * tree after startoffset 963 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 964 * -FDT_ERR_BADMAGIC, 965 * -FDT_ERR_BADVERSION, 966 * -FDT_ERR_BADSTATE, 967 * -FDT_ERR_BADSTRUCTURE, standard meanings 968 */ 969 int fdt_node_offset_by_compatible(const void *fdt, int startoffset, 970 const char *compatible); 971 972 /** 973 * fdt_stringlist_contains - check a string list property for a string 974 * @strlist: Property containing a list of strings to check 975 * @listlen: Length of property 976 * @str: String to search for 977 * 978 * This is a utility function provided for convenience. The list contains 979 * one or more strings, each terminated by \0, as is found in a device tree 980 * "compatible" property. 981 * 982 * @return: 1 if the string is found in the list, 0 not found, or invalid list 983 */ 984 int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); 985 986 /** 987 * fdt_stringlist_count - count the number of strings in a string list 988 * @fdt: pointer to the device tree blob 989 * @nodeoffset: offset of a tree node 990 * @property: name of the property containing the string list 991 * @return: 992 * the number of strings in the given property 993 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 994 * -FDT_ERR_NOTFOUND if the property does not exist 995 */ 996 int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); 997 998 /** 999 * fdt_stringlist_search - find a string in a string list and return its index 1000 * @fdt: pointer to the device tree blob 1001 * @nodeoffset: offset of a tree node 1002 * @property: name of the property containing the string list 1003 * @string: string to look up in the string list 1004 * 1005 * Note that it is possible for this function to succeed on property values 1006 * that are not NUL-terminated. That's because the function will stop after 1007 * finding the first occurrence of @string. This can for example happen with 1008 * small-valued cell properties, such as #address-cells, when searching for 1009 * the empty string. 1010 * 1011 * @return: 1012 * the index of the string in the list of strings 1013 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 1014 * -FDT_ERR_NOTFOUND if the property does not exist or does not contain 1015 * the given string 1016 */ 1017 int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, 1018 const char *string); 1019 1020 /** 1021 * fdt_stringlist_get() - obtain the string at a given index in a string list 1022 * @fdt: pointer to the device tree blob 1023 * @nodeoffset: offset of a tree node 1024 * @property: name of the property containing the string list 1025 * @index: index of the string to return 1026 * @lenp: return location for the string length or an error code on failure 1027 * 1028 * Note that this will successfully extract strings from properties with 1029 * non-NUL-terminated values. For example on small-valued cell properties 1030 * this function will return the empty string. 1031 * 1032 * If non-NULL, the length of the string (on success) or a negative error-code 1033 * (on failure) will be stored in the integer pointer to by lenp. 1034 * 1035 * @return: 1036 * A pointer to the string at the given index in the string list or NULL on 1037 * failure. On success the length of the string will be stored in the memory 1038 * location pointed to by the lenp parameter, if non-NULL. On failure one of 1039 * the following negative error codes will be returned in the lenp parameter 1040 * (if non-NULL): 1041 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 1042 * -FDT_ERR_NOTFOUND if the property does not exist 1043 */ 1044 const char *fdt_stringlist_get(const void *fdt, int nodeoffset, 1045 const char *property, int index, 1046 int *lenp); 1047 1048 /**********************************************************************/ 1049 /* Read-only functions (addressing related) */ 1050 /**********************************************************************/ 1051 1052 /** 1053 * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells 1054 * 1055 * This is the maximum value for #address-cells, #size-cells and 1056 * similar properties that will be processed by libfdt. IEE1275 1057 * requires that OF implementations handle values up to 4. 1058 * Implementations may support larger values, but in practice higher 1059 * values aren't used. 1060 */ 1061 #define FDT_MAX_NCELLS 4 1062 1063 /** 1064 * fdt_address_cells - retrieve address size for a bus represented in the tree 1065 * @fdt: pointer to the device tree blob 1066 * @nodeoffset: offset of the node to find the address size for 1067 * 1068 * When the node has a valid #address-cells property, returns its value. 1069 * 1070 * returns: 1071 * 0 <= n < FDT_MAX_NCELLS, on success 1072 * 2, if the node has no #address-cells property 1073 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid 1074 * #address-cells property 1075 * -FDT_ERR_BADMAGIC, 1076 * -FDT_ERR_BADVERSION, 1077 * -FDT_ERR_BADSTATE, 1078 * -FDT_ERR_BADSTRUCTURE, 1079 * -FDT_ERR_TRUNCATED, standard meanings 1080 */ 1081 int fdt_address_cells(const void *fdt, int nodeoffset); 1082 1083 /** 1084 * fdt_size_cells - retrieve address range size for a bus represented in the 1085 * tree 1086 * @fdt: pointer to the device tree blob 1087 * @nodeoffset: offset of the node to find the address range size for 1088 * 1089 * When the node has a valid #size-cells property, returns its value. 1090 * 1091 * returns: 1092 * 0 <= n < FDT_MAX_NCELLS, on success 1093 * 2, if the node has no #address-cells property 1094 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid 1095 * #size-cells property 1096 * -FDT_ERR_BADMAGIC, 1097 * -FDT_ERR_BADVERSION, 1098 * -FDT_ERR_BADSTATE, 1099 * -FDT_ERR_BADSTRUCTURE, 1100 * -FDT_ERR_TRUNCATED, standard meanings 1101 */ 1102 int fdt_size_cells(const void *fdt, int nodeoffset); 1103 1104 1105 /**********************************************************************/ 1106 /* Write-in-place functions */ 1107 /**********************************************************************/ 1108 1109 /** 1110 * fdt_setprop_inplace_namelen_partial - change a property's value, 1111 * but not its size 1112 * @fdt: pointer to the device tree blob 1113 * @nodeoffset: offset of the node whose property to change 1114 * @name: name of the property to change 1115 * @namelen: number of characters of name to consider 1116 * @idx: index of the property to change in the array 1117 * @val: pointer to data to replace the property value with 1118 * @len: length of the property value 1119 * 1120 * Identical to fdt_setprop_inplace(), but modifies the given property 1121 * starting from the given index, and using only the first characters 1122 * of the name. It is useful when you want to manipulate only one value of 1123 * an array and you have a string that doesn't end with \0. 1124 */ 1125 #ifndef SWIG /* Not available in Python */ 1126 int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, 1127 const char *name, int namelen, 1128 uint32_t idx, const void *val, 1129 int len); 1130 #endif 1131 1132 /** 1133 * fdt_setprop_inplace - change a property's value, but not its size 1134 * @fdt: pointer to the device tree blob 1135 * @nodeoffset: offset of the node whose property to change 1136 * @name: name of the property to change 1137 * @val: pointer to data to replace the property value with 1138 * @len: length of the property value 1139 * 1140 * fdt_setprop_inplace() replaces the value of a given property with 1141 * the data in val, of length len. This function cannot change the 1142 * size of a property, and so will only work if len is equal to the 1143 * current length of the property. 1144 * 1145 * This function will alter only the bytes in the blob which contain 1146 * the given property value, and will not alter or move any other part 1147 * of the tree. 1148 * 1149 * returns: 1150 * 0, on success 1151 * -FDT_ERR_NOSPACE, if len is not equal to the property's current length 1152 * -FDT_ERR_NOTFOUND, node does not have the named property 1153 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1154 * -FDT_ERR_BADMAGIC, 1155 * -FDT_ERR_BADVERSION, 1156 * -FDT_ERR_BADSTATE, 1157 * -FDT_ERR_BADSTRUCTURE, 1158 * -FDT_ERR_TRUNCATED, standard meanings 1159 */ 1160 #ifndef SWIG /* Not available in Python */ 1161 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, 1162 const void *val, int len); 1163 #endif 1164 1165 /** 1166 * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property 1167 * @fdt: pointer to the device tree blob 1168 * @nodeoffset: offset of the node whose property to change 1169 * @name: name of the property to change 1170 * @val: 32-bit integer value to replace the property with 1171 * 1172 * fdt_setprop_inplace_u32() replaces the value of a given property 1173 * with the 32-bit integer value in val, converting val to big-endian 1174 * if necessary. This function cannot change the size of a property, 1175 * and so will only work if the property already exists and has length 1176 * 4. 1177 * 1178 * This function will alter only the bytes in the blob which contain 1179 * the given property value, and will not alter or move any other part 1180 * of the tree. 1181 * 1182 * returns: 1183 * 0, on success 1184 * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 1185 * -FDT_ERR_NOTFOUND, node does not have the named property 1186 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1187 * -FDT_ERR_BADMAGIC, 1188 * -FDT_ERR_BADVERSION, 1189 * -FDT_ERR_BADSTATE, 1190 * -FDT_ERR_BADSTRUCTURE, 1191 * -FDT_ERR_TRUNCATED, standard meanings 1192 */ 1193 static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, 1194 const char *name, uint32_t val) 1195 { 1196 fdt32_t tmp = cpu_to_fdt32(val); 1197 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1198 } 1199 1200 /** 1201 * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property 1202 * @fdt: pointer to the device tree blob 1203 * @nodeoffset: offset of the node whose property to change 1204 * @name: name of the property to change 1205 * @val: 64-bit integer value to replace the property with 1206 * 1207 * fdt_setprop_inplace_u64() replaces the value of a given property 1208 * with the 64-bit integer value in val, converting val to big-endian 1209 * if necessary. This function cannot change the size of a property, 1210 * and so will only work if the property already exists and has length 1211 * 8. 1212 * 1213 * This function will alter only the bytes in the blob which contain 1214 * the given property value, and will not alter or move any other part 1215 * of the tree. 1216 * 1217 * returns: 1218 * 0, on success 1219 * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 1220 * -FDT_ERR_NOTFOUND, node does not have the named property 1221 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1222 * -FDT_ERR_BADMAGIC, 1223 * -FDT_ERR_BADVERSION, 1224 * -FDT_ERR_BADSTATE, 1225 * -FDT_ERR_BADSTRUCTURE, 1226 * -FDT_ERR_TRUNCATED, standard meanings 1227 */ 1228 static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, 1229 const char *name, uint64_t val) 1230 { 1231 fdt64_t tmp = cpu_to_fdt64(val); 1232 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1233 } 1234 1235 /** 1236 * fdt_setprop_inplace_cell - change the value of a single-cell property 1237 * 1238 * This is an alternative name for fdt_setprop_inplace_u32() 1239 */ 1240 static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, 1241 const char *name, uint32_t val) 1242 { 1243 return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); 1244 } 1245 1246 /** 1247 * fdt_nop_property - replace a property with nop tags 1248 * @fdt: pointer to the device tree blob 1249 * @nodeoffset: offset of the node whose property to nop 1250 * @name: name of the property to nop 1251 * 1252 * fdt_nop_property() will replace a given property's representation 1253 * in the blob with FDT_NOP tags, effectively removing it from the 1254 * tree. 1255 * 1256 * This function will alter only the bytes in the blob which contain 1257 * the property, and will not alter or move any other part of the 1258 * tree. 1259 * 1260 * returns: 1261 * 0, on success 1262 * -FDT_ERR_NOTFOUND, node does not have the named property 1263 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1264 * -FDT_ERR_BADMAGIC, 1265 * -FDT_ERR_BADVERSION, 1266 * -FDT_ERR_BADSTATE, 1267 * -FDT_ERR_BADSTRUCTURE, 1268 * -FDT_ERR_TRUNCATED, standard meanings 1269 */ 1270 int fdt_nop_property(void *fdt, int nodeoffset, const char *name); 1271 1272 /** 1273 * fdt_nop_node - replace a node (subtree) with nop tags 1274 * @fdt: pointer to the device tree blob 1275 * @nodeoffset: offset of the node to nop 1276 * 1277 * fdt_nop_node() will replace a given node's representation in the 1278 * blob, including all its subnodes, if any, with FDT_NOP tags, 1279 * effectively removing it from the tree. 1280 * 1281 * This function will alter only the bytes in the blob which contain 1282 * the node and its properties and subnodes, and will not alter or 1283 * move any other part of the tree. 1284 * 1285 * returns: 1286 * 0, on success 1287 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1288 * -FDT_ERR_BADMAGIC, 1289 * -FDT_ERR_BADVERSION, 1290 * -FDT_ERR_BADSTATE, 1291 * -FDT_ERR_BADSTRUCTURE, 1292 * -FDT_ERR_TRUNCATED, standard meanings 1293 */ 1294 int fdt_nop_node(void *fdt, int nodeoffset); 1295 1296 /**********************************************************************/ 1297 /* Sequential write functions */ 1298 /**********************************************************************/ 1299 1300 int fdt_create(void *buf, int bufsize); 1301 int fdt_resize(void *fdt, void *buf, int bufsize); 1302 int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); 1303 int fdt_finish_reservemap(void *fdt); 1304 int fdt_begin_node(void *fdt, const char *name); 1305 int fdt_property(void *fdt, const char *name, const void *val, int len); 1306 static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) 1307 { 1308 fdt32_t tmp = cpu_to_fdt32(val); 1309 return fdt_property(fdt, name, &tmp, sizeof(tmp)); 1310 } 1311 static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) 1312 { 1313 fdt64_t tmp = cpu_to_fdt64(val); 1314 return fdt_property(fdt, name, &tmp, sizeof(tmp)); 1315 } 1316 static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) 1317 { 1318 return fdt_property_u32(fdt, name, val); 1319 } 1320 1321 /** 1322 * fdt_property_placeholder - add a new property and return a ptr to its value 1323 * 1324 * @fdt: pointer to the device tree blob 1325 * @name: name of property to add 1326 * @len: length of property value in bytes 1327 * @valp: returns a pointer to where where the value should be placed 1328 * 1329 * returns: 1330 * 0, on success 1331 * -FDT_ERR_BADMAGIC, 1332 * -FDT_ERR_NOSPACE, standard meanings 1333 */ 1334 int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); 1335 1336 #define fdt_property_string(fdt, name, str) \ 1337 fdt_property(fdt, name, str, strlen(str)+1) 1338 int fdt_end_node(void *fdt); 1339 int fdt_finish(void *fdt); 1340 1341 /**********************************************************************/ 1342 /* Read-write functions */ 1343 /**********************************************************************/ 1344 1345 int fdt_create_empty_tree(void *buf, int bufsize); 1346 int fdt_open_into(const void *fdt, void *buf, int bufsize); 1347 int fdt_pack(void *fdt); 1348 1349 /** 1350 * fdt_add_mem_rsv - add one memory reserve map entry 1351 * @fdt: pointer to the device tree blob 1352 * @address, @size: 64-bit values (native endian) 1353 * 1354 * Adds a reserve map entry to the given blob reserving a region at 1355 * address address of length size. 1356 * 1357 * This function will insert data into the reserve map and will 1358 * therefore change the indexes of some entries in the table. 1359 * 1360 * returns: 1361 * 0, on success 1362 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1363 * contain the new reservation entry 1364 * -FDT_ERR_BADMAGIC, 1365 * -FDT_ERR_BADVERSION, 1366 * -FDT_ERR_BADSTATE, 1367 * -FDT_ERR_BADSTRUCTURE, 1368 * -FDT_ERR_BADLAYOUT, 1369 * -FDT_ERR_TRUNCATED, standard meanings 1370 */ 1371 int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); 1372 1373 /** 1374 * fdt_del_mem_rsv - remove a memory reserve map entry 1375 * @fdt: pointer to the device tree blob 1376 * @n: entry to remove 1377 * 1378 * fdt_del_mem_rsv() removes the n-th memory reserve map entry from 1379 * the blob. 1380 * 1381 * This function will delete data from the reservation table and will 1382 * therefore change the indexes of some entries in the table. 1383 * 1384 * returns: 1385 * 0, on success 1386 * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there 1387 * are less than n+1 reserve map entries) 1388 * -FDT_ERR_BADMAGIC, 1389 * -FDT_ERR_BADVERSION, 1390 * -FDT_ERR_BADSTATE, 1391 * -FDT_ERR_BADSTRUCTURE, 1392 * -FDT_ERR_BADLAYOUT, 1393 * -FDT_ERR_TRUNCATED, standard meanings 1394 */ 1395 int fdt_del_mem_rsv(void *fdt, int n); 1396 1397 /** 1398 * fdt_set_name - change the name of a given node 1399 * @fdt: pointer to the device tree blob 1400 * @nodeoffset: structure block offset of a node 1401 * @name: name to give the node 1402 * 1403 * fdt_set_name() replaces the name (including unit address, if any) 1404 * of the given node with the given string. NOTE: this function can't 1405 * efficiently check if the new name is unique amongst the given 1406 * node's siblings; results are undefined if this function is invoked 1407 * with a name equal to one of the given node's siblings. 1408 * 1409 * This function may insert or delete data from the blob, and will 1410 * therefore change the offsets of some existing nodes. 1411 * 1412 * returns: 1413 * 0, on success 1414 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob 1415 * to contain the new name 1416 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1417 * -FDT_ERR_BADMAGIC, 1418 * -FDT_ERR_BADVERSION, 1419 * -FDT_ERR_BADSTATE, standard meanings 1420 */ 1421 int fdt_set_name(void *fdt, int nodeoffset, const char *name); 1422 1423 /** 1424 * fdt_setprop - create or change a property 1425 * @fdt: pointer to the device tree blob 1426 * @nodeoffset: offset of the node whose property to change 1427 * @name: name of the property to change 1428 * @val: pointer to data to set the property value to 1429 * @len: length of the property value 1430 * 1431 * fdt_setprop() sets the value of the named property in the given 1432 * node to the given value and length, creating the property if it 1433 * does not already exist. 1434 * 1435 * This function may insert or delete data from the blob, and will 1436 * therefore change the offsets of some existing nodes. 1437 * 1438 * returns: 1439 * 0, on success 1440 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1441 * contain the new property value 1442 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1443 * -FDT_ERR_BADLAYOUT, 1444 * -FDT_ERR_BADMAGIC, 1445 * -FDT_ERR_BADVERSION, 1446 * -FDT_ERR_BADSTATE, 1447 * -FDT_ERR_BADSTRUCTURE, 1448 * -FDT_ERR_BADLAYOUT, 1449 * -FDT_ERR_TRUNCATED, standard meanings 1450 */ 1451 int fdt_setprop(void *fdt, int nodeoffset, const char *name, 1452 const void *val, int len); 1453 1454 /** 1455 * fdt_setprop_placeholder - allocate space for a property 1456 * @fdt: pointer to the device tree blob 1457 * @nodeoffset: offset of the node whose property to change 1458 * @name: name of the property to change 1459 * @len: length of the property value 1460 * @prop_data: return pointer to property data 1461 * 1462 * fdt_setprop_placeholer() allocates the named property in the given node. 1463 * If the property exists it is resized. In either case a pointer to the 1464 * property data is returned. 1465 * 1466 * This function may insert or delete data from the blob, and will 1467 * therefore change the offsets of some existing nodes. 1468 * 1469 * returns: 1470 * 0, on success 1471 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1472 * contain the new property value 1473 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1474 * -FDT_ERR_BADLAYOUT, 1475 * -FDT_ERR_BADMAGIC, 1476 * -FDT_ERR_BADVERSION, 1477 * -FDT_ERR_BADSTATE, 1478 * -FDT_ERR_BADSTRUCTURE, 1479 * -FDT_ERR_BADLAYOUT, 1480 * -FDT_ERR_TRUNCATED, standard meanings 1481 */ 1482 int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, 1483 int len, void **prop_data); 1484 1485 /** 1486 * fdt_setprop_u32 - set a property to a 32-bit integer 1487 * @fdt: pointer to the device tree blob 1488 * @nodeoffset: offset of the node whose property to change 1489 * @name: name of the property to change 1490 * @val: 32-bit integer value for the property (native endian) 1491 * 1492 * fdt_setprop_u32() sets the value of the named property in the given 1493 * node to the given 32-bit integer value (converting to big-endian if 1494 * necessary), or creates a new property with that value if it does 1495 * not already exist. 1496 * 1497 * This function may insert or delete data from the blob, and will 1498 * therefore change the offsets of some existing nodes. 1499 * 1500 * returns: 1501 * 0, on success 1502 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1503 * contain the new property value 1504 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1505 * -FDT_ERR_BADLAYOUT, 1506 * -FDT_ERR_BADMAGIC, 1507 * -FDT_ERR_BADVERSION, 1508 * -FDT_ERR_BADSTATE, 1509 * -FDT_ERR_BADSTRUCTURE, 1510 * -FDT_ERR_BADLAYOUT, 1511 * -FDT_ERR_TRUNCATED, standard meanings 1512 */ 1513 static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, 1514 uint32_t val) 1515 { 1516 fdt32_t tmp = cpu_to_fdt32(val); 1517 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1518 } 1519 1520 /** 1521 * fdt_setprop_u64 - set a property to a 64-bit integer 1522 * @fdt: pointer to the device tree blob 1523 * @nodeoffset: offset of the node whose property to change 1524 * @name: name of the property to change 1525 * @val: 64-bit integer value for the property (native endian) 1526 * 1527 * fdt_setprop_u64() sets the value of the named property in the given 1528 * node to the given 64-bit integer value (converting to big-endian if 1529 * necessary), or creates a new property with that value if it does 1530 * not already exist. 1531 * 1532 * This function may insert or delete data from the blob, and will 1533 * therefore change the offsets of some existing nodes. 1534 * 1535 * returns: 1536 * 0, on success 1537 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1538 * contain the new property value 1539 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1540 * -FDT_ERR_BADLAYOUT, 1541 * -FDT_ERR_BADMAGIC, 1542 * -FDT_ERR_BADVERSION, 1543 * -FDT_ERR_BADSTATE, 1544 * -FDT_ERR_BADSTRUCTURE, 1545 * -FDT_ERR_BADLAYOUT, 1546 * -FDT_ERR_TRUNCATED, standard meanings 1547 */ 1548 static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, 1549 uint64_t val) 1550 { 1551 fdt64_t tmp = cpu_to_fdt64(val); 1552 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1553 } 1554 1555 /** 1556 * fdt_setprop_cell - set a property to a single cell value 1557 * 1558 * This is an alternative name for fdt_setprop_u32() 1559 */ 1560 static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, 1561 uint32_t val) 1562 { 1563 return fdt_setprop_u32(fdt, nodeoffset, name, val); 1564 } 1565 1566 /** 1567 * fdt_setprop_string - set a property to a string value 1568 * @fdt: pointer to the device tree blob 1569 * @nodeoffset: offset of the node whose property to change 1570 * @name: name of the property to change 1571 * @str: string value for the property 1572 * 1573 * fdt_setprop_string() sets the value of the named property in the 1574 * given node to the given string value (using the length of the 1575 * string to determine the new length of the property), or creates a 1576 * new property with that value if it does not already exist. 1577 * 1578 * This function may insert or delete data from the blob, and will 1579 * therefore change the offsets of some existing nodes. 1580 * 1581 * returns: 1582 * 0, on success 1583 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1584 * contain the new property value 1585 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1586 * -FDT_ERR_BADLAYOUT, 1587 * -FDT_ERR_BADMAGIC, 1588 * -FDT_ERR_BADVERSION, 1589 * -FDT_ERR_BADSTATE, 1590 * -FDT_ERR_BADSTRUCTURE, 1591 * -FDT_ERR_BADLAYOUT, 1592 * -FDT_ERR_TRUNCATED, standard meanings 1593 */ 1594 #define fdt_setprop_string(fdt, nodeoffset, name, str) \ 1595 fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) 1596 1597 1598 /** 1599 * fdt_setprop_empty - set a property to an empty value 1600 * @fdt: pointer to the device tree blob 1601 * @nodeoffset: offset of the node whose property to change 1602 * @name: name of the property to change 1603 * 1604 * fdt_setprop_empty() sets the value of the named property in the 1605 * given node to an empty (zero length) value, or creates a new empty 1606 * property if it does not already exist. 1607 * 1608 * This function may insert or delete data from the blob, and will 1609 * therefore change the offsets of some existing nodes. 1610 * 1611 * returns: 1612 * 0, on success 1613 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1614 * contain the new property value 1615 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1616 * -FDT_ERR_BADLAYOUT, 1617 * -FDT_ERR_BADMAGIC, 1618 * -FDT_ERR_BADVERSION, 1619 * -FDT_ERR_BADSTATE, 1620 * -FDT_ERR_BADSTRUCTURE, 1621 * -FDT_ERR_BADLAYOUT, 1622 * -FDT_ERR_TRUNCATED, standard meanings 1623 */ 1624 #define fdt_setprop_empty(fdt, nodeoffset, name) \ 1625 fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) 1626 1627 /** 1628 * fdt_appendprop - append to or create a property 1629 * @fdt: pointer to the device tree blob 1630 * @nodeoffset: offset of the node whose property to change 1631 * @name: name of the property to append to 1632 * @val: pointer to data to append to the property value 1633 * @len: length of the data to append to the property value 1634 * 1635 * fdt_appendprop() appends the value to the named property in the 1636 * given node, creating the property if it does not already exist. 1637 * 1638 * This function may insert data into the blob, and will therefore 1639 * change the offsets of some existing nodes. 1640 * 1641 * returns: 1642 * 0, on success 1643 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1644 * contain the new property value 1645 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1646 * -FDT_ERR_BADLAYOUT, 1647 * -FDT_ERR_BADMAGIC, 1648 * -FDT_ERR_BADVERSION, 1649 * -FDT_ERR_BADSTATE, 1650 * -FDT_ERR_BADSTRUCTURE, 1651 * -FDT_ERR_BADLAYOUT, 1652 * -FDT_ERR_TRUNCATED, standard meanings 1653 */ 1654 int fdt_appendprop(void *fdt, int nodeoffset, const char *name, 1655 const void *val, int len); 1656 1657 /** 1658 * fdt_appendprop_u32 - append a 32-bit integer value to a property 1659 * @fdt: pointer to the device tree blob 1660 * @nodeoffset: offset of the node whose property to change 1661 * @name: name of the property to change 1662 * @val: 32-bit integer value to append to the property (native endian) 1663 * 1664 * fdt_appendprop_u32() appends the given 32-bit integer value 1665 * (converting to big-endian if necessary) to the value of the named 1666 * property in the given node, or creates a new property with that 1667 * value if it does not already exist. 1668 * 1669 * This function may insert data into the blob, and will therefore 1670 * change the offsets of some existing nodes. 1671 * 1672 * returns: 1673 * 0, on success 1674 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1675 * contain the new property value 1676 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1677 * -FDT_ERR_BADLAYOUT, 1678 * -FDT_ERR_BADMAGIC, 1679 * -FDT_ERR_BADVERSION, 1680 * -FDT_ERR_BADSTATE, 1681 * -FDT_ERR_BADSTRUCTURE, 1682 * -FDT_ERR_BADLAYOUT, 1683 * -FDT_ERR_TRUNCATED, standard meanings 1684 */ 1685 static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, 1686 const char *name, uint32_t val) 1687 { 1688 fdt32_t tmp = cpu_to_fdt32(val); 1689 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1690 } 1691 1692 /** 1693 * fdt_appendprop_u64 - append a 64-bit integer value to a property 1694 * @fdt: pointer to the device tree blob 1695 * @nodeoffset: offset of the node whose property to change 1696 * @name: name of the property to change 1697 * @val: 64-bit integer value to append to the property (native endian) 1698 * 1699 * fdt_appendprop_u64() appends the given 64-bit integer value 1700 * (converting to big-endian if necessary) to the value of the named 1701 * property in the given node, or creates a new property with that 1702 * value if it does not already exist. 1703 * 1704 * This function may insert data into the blob, and will therefore 1705 * change the offsets of some existing nodes. 1706 * 1707 * returns: 1708 * 0, on success 1709 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1710 * contain the new property value 1711 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1712 * -FDT_ERR_BADLAYOUT, 1713 * -FDT_ERR_BADMAGIC, 1714 * -FDT_ERR_BADVERSION, 1715 * -FDT_ERR_BADSTATE, 1716 * -FDT_ERR_BADSTRUCTURE, 1717 * -FDT_ERR_BADLAYOUT, 1718 * -FDT_ERR_TRUNCATED, standard meanings 1719 */ 1720 static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, 1721 const char *name, uint64_t val) 1722 { 1723 fdt64_t tmp = cpu_to_fdt64(val); 1724 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1725 } 1726 1727 /** 1728 * fdt_appendprop_cell - append a single cell value to a property 1729 * 1730 * This is an alternative name for fdt_appendprop_u32() 1731 */ 1732 static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, 1733 const char *name, uint32_t val) 1734 { 1735 return fdt_appendprop_u32(fdt, nodeoffset, name, val); 1736 } 1737 1738 /** 1739 * fdt_appendprop_string - append a string to a property 1740 * @fdt: pointer to the device tree blob 1741 * @nodeoffset: offset of the node whose property to change 1742 * @name: name of the property to change 1743 * @str: string value to append to the property 1744 * 1745 * fdt_appendprop_string() appends the given string to the value of 1746 * the named property in the given node, or creates a new property 1747 * with that value if it does not already exist. 1748 * 1749 * This function may insert data into the blob, and will therefore 1750 * change the offsets of some existing nodes. 1751 * 1752 * returns: 1753 * 0, on success 1754 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1755 * contain the new property value 1756 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1757 * -FDT_ERR_BADLAYOUT, 1758 * -FDT_ERR_BADMAGIC, 1759 * -FDT_ERR_BADVERSION, 1760 * -FDT_ERR_BADSTATE, 1761 * -FDT_ERR_BADSTRUCTURE, 1762 * -FDT_ERR_BADLAYOUT, 1763 * -FDT_ERR_TRUNCATED, standard meanings 1764 */ 1765 #define fdt_appendprop_string(fdt, nodeoffset, name, str) \ 1766 fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) 1767 1768 /** 1769 * fdt_delprop - delete a property 1770 * @fdt: pointer to the device tree blob 1771 * @nodeoffset: offset of the node whose property to nop 1772 * @name: name of the property to nop 1773 * 1774 * fdt_del_property() will delete the given property. 1775 * 1776 * This function will delete data from the blob, and will therefore 1777 * change the offsets of some existing nodes. 1778 * 1779 * returns: 1780 * 0, on success 1781 * -FDT_ERR_NOTFOUND, node does not have the named property 1782 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1783 * -FDT_ERR_BADLAYOUT, 1784 * -FDT_ERR_BADMAGIC, 1785 * -FDT_ERR_BADVERSION, 1786 * -FDT_ERR_BADSTATE, 1787 * -FDT_ERR_BADSTRUCTURE, 1788 * -FDT_ERR_TRUNCATED, standard meanings 1789 */ 1790 int fdt_delprop(void *fdt, int nodeoffset, const char *name); 1791 1792 /** 1793 * fdt_add_subnode_namelen - creates a new node based on substring 1794 * @fdt: pointer to the device tree blob 1795 * @parentoffset: structure block offset of a node 1796 * @name: name of the subnode to locate 1797 * @namelen: number of characters of name to consider 1798 * 1799 * Identical to fdt_add_subnode(), but use only the first namelen 1800 * characters of name as the name of the new node. This is useful for 1801 * creating subnodes based on a portion of a larger string, such as a 1802 * full path. 1803 */ 1804 #ifndef SWIG /* Not available in Python */ 1805 int fdt_add_subnode_namelen(void *fdt, int parentoffset, 1806 const char *name, int namelen); 1807 #endif 1808 1809 /** 1810 * fdt_add_subnode - creates a new node 1811 * @fdt: pointer to the device tree blob 1812 * @parentoffset: structure block offset of a node 1813 * @name: name of the subnode to locate 1814 * 1815 * fdt_add_subnode() creates a new node as a subnode of the node at 1816 * structure block offset parentoffset, with the given name (which 1817 * should include the unit address, if any). 1818 * 1819 * This function will insert data into the blob, and will therefore 1820 * change the offsets of some existing nodes. 1821 1822 * returns: 1823 * structure block offset of the created nodeequested subnode (>=0), on 1824 * success 1825 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist 1826 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE 1827 * tag 1828 * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of 1829 * the given name 1830 * -FDT_ERR_NOSPACE, if there is insufficient free space in the 1831 * blob to contain the new node 1832 * -FDT_ERR_NOSPACE 1833 * -FDT_ERR_BADLAYOUT 1834 * -FDT_ERR_BADMAGIC, 1835 * -FDT_ERR_BADVERSION, 1836 * -FDT_ERR_BADSTATE, 1837 * -FDT_ERR_BADSTRUCTURE, 1838 * -FDT_ERR_TRUNCATED, standard meanings. 1839 */ 1840 int fdt_add_subnode(void *fdt, int parentoffset, const char *name); 1841 1842 /** 1843 * fdt_del_node - delete a node (subtree) 1844 * @fdt: pointer to the device tree blob 1845 * @nodeoffset: offset of the node to nop 1846 * 1847 * fdt_del_node() will remove the given node, including all its 1848 * subnodes if any, from the blob. 1849 * 1850 * This function will delete data from the blob, and will therefore 1851 * change the offsets of some existing nodes. 1852 * 1853 * returns: 1854 * 0, on success 1855 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1856 * -FDT_ERR_BADLAYOUT, 1857 * -FDT_ERR_BADMAGIC, 1858 * -FDT_ERR_BADVERSION, 1859 * -FDT_ERR_BADSTATE, 1860 * -FDT_ERR_BADSTRUCTURE, 1861 * -FDT_ERR_TRUNCATED, standard meanings 1862 */ 1863 int fdt_del_node(void *fdt, int nodeoffset); 1864 1865 /** 1866 * fdt_overlay_apply - Applies a DT overlay on a base DT 1867 * @fdt: pointer to the base device tree blob 1868 * @fdto: pointer to the device tree overlay blob 1869 * 1870 * fdt_overlay_apply() will apply the given device tree overlay on the 1871 * given base device tree. 1872 * 1873 * Expect the base device tree to be modified, even if the function 1874 * returns an error. 1875 * 1876 * returns: 1877 * 0, on success 1878 * -FDT_ERR_NOSPACE, there's not enough space in the base device tree 1879 * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or 1880 * properties in the base DT 1881 * -FDT_ERR_BADPHANDLE, 1882 * -FDT_ERR_BADOVERLAY, 1883 * -FDT_ERR_NOPHANDLES, 1884 * -FDT_ERR_INTERNAL, 1885 * -FDT_ERR_BADLAYOUT, 1886 * -FDT_ERR_BADMAGIC, 1887 * -FDT_ERR_BADOFFSET, 1888 * -FDT_ERR_BADPATH, 1889 * -FDT_ERR_BADVERSION, 1890 * -FDT_ERR_BADSTRUCTURE, 1891 * -FDT_ERR_BADSTATE, 1892 * -FDT_ERR_TRUNCATED, standard meanings 1893 */ 1894 int fdt_overlay_apply(void *fdt, void *fdto); 1895 1896 /**********************************************************************/ 1897 /* Debugging / informational functions */ 1898 /**********************************************************************/ 1899 1900 const char *fdt_strerror(int errval); 1901 1902 #endif /* LIBFDT_H */ 1903