1# 2# (C) Copyright 2000-2011 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# (C) Copyright 2011 6# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com. 7# 8# (C) Copyright 2011 9# Texas Instruments Incorporated - http://www.ti.com/ 10# Aneesh V <aneesh@ti.com> 11# 12# SPDX-License-Identifier: GPL-2.0+ 13# 14# Based on top-level Makefile. 15# 16 17src := $(obj) 18 19# Create output directory if not already present 20_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 21 22include $(srctree)/scripts/Kbuild.include 23 24-include include/config/auto.conf 25-include $(obj)/include/autoconf.mk 26 27KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD 28ifeq ($(CONFIG_TPL_BUILD),y) 29KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD 30endif 31 32ifeq ($(CONFIG_TPL_BUILD),y) 33SPL_BIN := u-boot-tpl 34else 35SPL_BIN := u-boot-spl 36endif 37 38include $(srctree)/config.mk 39include $(srctree)/arch/$(ARCH)/Makefile 40 41# Enable garbage collection of un-used sections for SPL 42KBUILD_CFLAGS += -ffunction-sections -fdata-sections 43LDFLAGS_FINAL += --gc-sections 44 45# FIX ME 46cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 47 $(NOSTDINC_FLAGS) 48 49HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 50 51libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 52libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 53 54libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ 55libs-y += common/init/ 56libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ 57libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ 58libs-y += drivers/ 59libs-y += dts/ 60libs-y += fs/ 61libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ 62libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ 63libs-$(CONFIG_SPL_NET_SUPPORT) += net/ 64 65head-y := $(addprefix $(obj)/,$(head-y)) 66libs-y := $(addprefix $(obj)/,$(libs-y)) 67u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) 68 69libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 70 71# Add GCC lib 72ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 73PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 74PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) 75endif 76 77u-boot-spl-init := $(head-y) 78u-boot-spl-main := $(libs-y) 79 80# Linker Script 81ifdef CONFIG_SPL_LDSCRIPT 82# need to strip off double quotes 83LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) 84endif 85 86ifeq ($(wildcard $(LDSCRIPT)),) 87 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds 88endif 89ifeq ($(wildcard $(LDSCRIPT)),) 90 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds 91endif 92ifeq ($(wildcard $(LDSCRIPT)),) 93 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds 94endif 95ifeq ($(wildcard $(LDSCRIPT)),) 96$(error could not find linker script) 97endif 98 99# Special flags for CPP when processing the linker script. 100# Pass the version down so we can handle backwards compatibility 101# on the fly. 102LDPPFLAGS += \ 103 -include $(srctree)/include/u-boot/u-boot.lds.h \ 104 -include $(objtree)/include/config.h \ 105 -DCPUDIR=$(CPUDIR) \ 106 $(shell $(LD) --version | \ 107 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 108 109quiet_cmd_mkimage = MKIMAGE $@ 110cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 111 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 112 113MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE) 114 115MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) 116 117MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE 118 $(call if_changed,mkimage) 119 120ifeq ($(CONFIG_SYS_SOC),"at91") 121MKIMAGEFLAGS_boot.bin = -T atmelimage 122 123ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) 124MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) 125 126boot.bin: $(obj)/../tools/atmel_pmecc_params 127endif 128 129boot.bin: $(obj)/u-boot-spl.bin FORCE 130 $(call if_changed,mkimage) 131else 132MKIMAGEFLAGS_boot.bin = -T zynqimage 133 134spl/boot.bin: $(obj)/u-boot-spl.bin FORCE 135 $(call if_changed,mkimage) 136endif 137 138ALL-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg 139 140ifdef CONFIG_SAMSUNG 141ALL-y += $(obj)/$(BOARD)-spl.bin 142endif 143 144ifdef CONFIG_ARCH_SOCFPGA 145ALL-y += $(obj)/$(SPL_BIN).sfp 146endif 147 148ifdef CONFIG_SUNXI 149ALL-y += $(obj)/sunxi-spl.bin 150endif 151 152ifeq ($(CONFIG_SYS_SOC),"at91") 153ALL-y += boot.bin 154endif 155 156ifdef CONFIG_ARCH_ZYNQ 157ALL-y += $(obj)/boot.bin 158endif 159 160all: $(ALL-y) 161 162quiet_cmd_cat = CAT $@ 163cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 164 165quiet_cmd_copy = COPY $@ 166 cmd_copy = cp $< $@ 167 168ifeq ($(CONFIG_SPL_OF_CONTROL),y) 169$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin $(obj)/$(SPL_BIN)-pad.bin \ 170 $(obj)/$(SPL_BIN).dtb FORCE 171 $(call if_changed,cat) 172 173$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE 174 $(call if_changed,copy) 175else 176$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE 177 $(call if_changed,copy) 178endif 179 180# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end 181$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) 182 @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \ 183 dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null; 184 185# Pass the original device tree file through fdtgrep twice. The first pass 186# removes any unwanted nodes (i.e. those which don't have the 187# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second 188# pass removes various unused properties from the remaining nodes. 189# The output is typically a much smaller device tree file. 190quiet_cmd_fdtgrep = FDTGREP $@ 191 cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \ 192 -n /chosen -O dtb | \ 193 $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ 194 $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) 195 196$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE 197 $(call if_changed,fdtgrep) 198 199quiet_cmd_cpp_cfg = CFG $@ 200cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 201 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< 202 203$(obj)/$(SPL_BIN).cfg: include/config.h FORCE 204 $(call if_changed,cpp_cfg) 205 206ifdef CONFIG_SAMSUNG 207ifdef CONFIG_VAR_SIZE_SPL 208VAR_SIZE_PARAM = --vs 209else 210VAR_SIZE_PARAM = 211endif 212$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin 213 $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\ 214 $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\ 215 $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@ 216endif 217 218quiet_cmd_objcopy = OBJCOPY $@ 219cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 220 221OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary 222 223$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE 224 $(call if_changed,objcopy) 225 226LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) 227ifneq ($(CONFIG_SPL_TEXT_BASE),) 228LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) 229endif 230 231MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage 232$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE 233 $(call if_changed,mkimage) 234 235quiet_cmd_mksunxiboot = MKSUNXI $@ 236cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ 237$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE 238 $(call if_changed,mksunxiboot) 239 240quiet_cmd_u-boot-spl = LD $@ 241 cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ 242 $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ 243 $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \ 244 $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)) 245 246$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE 247 $(call if_changed,u-boot-spl) 248 249$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ; 250 251PHONY += $(u-boot-spl-dirs) 252$(u-boot-spl-dirs): 253 $(Q)$(MAKE) $(build)=$@ 254 255quiet_cmd_cpp_lds = LDS $@ 256cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 257 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 258 259$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE 260 $(call if_changed_dep,cpp_lds) 261 262# read all saved command lines 263 264targets := $(wildcard $(sort $(targets))) 265cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 266 267ifneq ($(cmd_files),) 268 $(cmd_files): ; # Do not try to update included dependency files 269 include $(cmd_files) 270endif 271 272PHONY += FORCE 273FORCE: 274 275# Declare the contents of the .PHONY variable as phony. We keep that 276# information in a variable so we can use it in if_changed and friends. 277.PHONY: $(PHONY) 278