1# 2# (C) Copyright 2000-2011 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# (C) Copyright 2011 6# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com. 7# 8# (C) Copyright 2011 9# Texas Instruments Incorporated - http://www.ti.com/ 10# Aneesh V <aneesh@ti.com> 11# 12# SPDX-License-Identifier: GPL-2.0+ 13# 14# Based on top-level Makefile. 15# 16 17src := $(obj) 18 19# Create output directory if not already present 20_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 21 22include $(srctree)/scripts/Kbuild.include 23 24-include include/config/auto.conf 25-include $(obj)/include/autoconf.mk 26 27KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD 28ifeq ($(CONFIG_TPL_BUILD),y) 29KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD 30endif 31 32ifeq ($(CONFIG_TPL_BUILD),y) 33SPL_BIN := u-boot-tpl 34else 35SPL_BIN := u-boot-spl 36endif 37 38ifdef CONFIG_SPL_BUILD 39SPL_ := SPL_ 40ifeq ($(CONFIG_TPL_BUILD),y) 41SPL_TPL_ := TPL_ 42else 43SPL_TPL_ := SPL_ 44endif 45else 46SPL_ := 47SPL_TPL_ := 48endif 49 50include $(srctree)/config.mk 51include $(srctree)/arch/$(ARCH)/Makefile 52 53# Enable garbage collection of un-used sections for SPL 54KBUILD_CFLAGS += -ffunction-sections -fdata-sections 55LDFLAGS_FINAL += --gc-sections 56 57# FIX ME 58cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 59 $(NOSTDINC_FLAGS) 60c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 61 62HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 63 64libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 65libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 66 67libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ 68libs-y += common/init/ 69 70# Special handling for a few options which support SPL/TPL 71ifeq ($(CONFIG_TPL_BUILD),y) 72libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/ 73libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/ 74else 75libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/ 76libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ 77endif 78 79libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ 80libs-y += drivers/ 81libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/ 82libs-y += dts/ 83libs-y += fs/ 84libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ 85libs-$(CONFIG_SPL_NET_SUPPORT) += net/ 86 87head-y := $(addprefix $(obj)/,$(head-y)) 88libs-y := $(addprefix $(obj)/,$(libs-y)) 89u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) 90 91libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 92 93# Add GCC lib 94ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 95PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 96PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) 97endif 98 99u-boot-spl-init := $(head-y) 100u-boot-spl-main := $(libs-y) 101ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA 102u-boot-spl-platdata := $(obj)/dts/dt-platdata.o 103endif 104 105# Linker Script 106# First test whether there's a linker-script for the specific stage defined... 107ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),) 108# need to strip off double quotes 109LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%)) 110else 111# ...then fall back to the generic SPL linker-script 112ifneq ($(CONFIG_SPL_LDSCRIPT),) 113# need to strip off double quotes 114LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) 115endif 116endif 117 118ifeq ($(wildcard $(LDSCRIPT)),) 119 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds 120endif 121ifeq ($(wildcard $(LDSCRIPT)),) 122 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds 123endif 124ifeq ($(wildcard $(LDSCRIPT)),) 125 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds 126endif 127ifeq ($(wildcard $(LDSCRIPT)),) 128$(error could not find linker script) 129endif 130 131# Special flags for CPP when processing the linker script. 132# Pass the version down so we can handle backwards compatibility 133# on the fly. 134LDPPFLAGS += \ 135 -include $(srctree)/include/u-boot/u-boot.lds.h \ 136 -include $(objtree)/include/config.h \ 137 -DCPUDIR=$(CPUDIR) \ 138 $(shell $(LD) --version | \ 139 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 140 141MKIMAGEOUTPUT ?= /dev/null 142 143quiet_cmd_mkimage = MKIMAGE $@ 144cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 145 $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) 146 147MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE) 148 149MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) 150 151MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE 152 $(call if_changed,mkimage) 153 154ifeq ($(CONFIG_SYS_SOC),"at91") 155MKIMAGEFLAGS_boot.bin = -T atmelimage 156 157ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) 158MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) 159 160boot.bin: $(obj)/../tools/atmel_pmecc_params 161endif 162 163boot.bin: $(obj)/u-boot-spl.bin FORCE 164 $(call if_changed,mkimage) 165else 166ifdef CONFIG_ARCH_ZYNQ 167MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) 168endif 169ifdef CONFIG_ARCH_ZYNQMP 170MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \ 171 -n $(srctree)/$(CONFIG_PMUFW_INIT_FILE) 172endif 173 174spl/boot.bin: $(obj)/u-boot-spl.bin FORCE 175 $(call if_changed,mkimage) 176endif 177 178ALL-y += $(obj)/$(SPL_BIN).bin 179 180ifdef CONFIG_SAMSUNG 181ALL-y += $(obj)/$(BOARD)-spl.bin 182endif 183 184ifdef CONFIG_ARCH_SOCFPGA 185ALL-y += $(obj)/$(SPL_BIN).sfp 186endif 187 188ifdef CONFIG_ARCH_SUNXI 189ALL-y += $(obj)/sunxi-spl.bin 190 191ifdef CONFIG_NAND_SUNXI 192ALL-y += $(obj)/sunxi-spl-with-ecc.bin 193endif 194endif 195 196ifeq ($(CONFIG_SYS_SOC),"at91") 197ALL-y += boot.bin 198endif 199 200ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin 201 202ALL-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin 203ALL-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin 204 205all: $(ALL-y) 206 207quiet_cmd_cat = CAT $@ 208cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 209 210quiet_cmd_copy = COPY $@ 211 cmd_copy = cp $< $@ 212 213ifneq ($(CONFIG_SPL_MULTI_DTB_FIT),y) 214FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).dtb 215else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_LZO),y) 216FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.lzo 217else ifeq ($(CONFIG_SPL_MULTI_DTB_FIT_GZIP),y) 218FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit.gz 219else 220FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit 221endif 222 223 224ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) 225$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \ 226 $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ 227 $(FINAL_DTB_CONTAINER) FORCE 228 $(call if_changed,cat) 229 230$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE 231 $(call if_changed,copy) 232else 233$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE 234 $(call if_changed,copy) 235endif 236 237# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end 238$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) 239 @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \ 240 dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null; 241 242# Pass the original device tree file through fdtgrep twice. The first pass 243# removes any unwanted nodes (i.e. those which don't have the 244# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second 245# pass removes various unused properties from the remaining nodes. 246# The output is typically a much smaller device tree file. 247ifeq ($(CONFIG_TPL_BUILD),y) 248fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl 249else 250fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl 251endif 252quiet_cmd_fdtgrep = FDTGREP $@ 253 cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \ 254 -n /chosen -n /config -O dtb | \ 255 $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ 256 $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) 257 258$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE 259 $(call if_changed,fdtgrep) 260 261pythonpath = PYTHONPATH=scripts/dtc/pylibfdt 262 263quiet_cmd_dtocc = DTOC C $@ 264cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata 265 266quiet_cmd_dtoch = DTOC H $@ 267cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct 268 269quiet_cmd_plat = PLAT $@ 270cmd_plat = $(CC) $(c_flags) -c $< -o $@ 271 272$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c \ 273 include/generated/dt-structs-gen.h 274 $(call if_changed,plat) 275 276PHONY += dts_dir 277dts_dir: 278 $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts) 279 280include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir FORCE 281 $(call if_changed,dtoch) 282 283$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir FORCE 284 $(call if_changed,dtocc) 285 286ifdef CONFIG_SAMSUNG 287ifdef CONFIG_VAR_SIZE_SPL 288VAR_SIZE_PARAM = --vs 289else 290VAR_SIZE_PARAM = 291endif 292$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin 293 $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\ 294 $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\ 295 $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@ 296endif 297 298quiet_cmd_objcopy = OBJCOPY $@ 299cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 300 301OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \ 302 $(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec) 303 304$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE 305 $(call if_changed,objcopy) 306 307OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec 308$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE 309 $(call if_changed,objcopy) 310 311LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) 312 313# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. 314LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker) 315 316# First try the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL) 317ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) 318LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE) 319else 320# And then fall back to just testing for SPL_TEXT_BASE, even if in TPL mode 321ifneq ($(CONFIG_SPL_TEXT_BASE),) 322LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) 323endif 324endif 325 326MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage 327$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE 328 $(call if_changed,mkimage) 329 330quiet_cmd_mksunxiboot = MKSUNXI $@ 331cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \ 332 --default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@ 333$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE 334 $(call if_changed,mksunxiboot) 335 336quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@ 337cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \ 338 -c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \ 339 -p $(CONFIG_SYS_NAND_PAGE_SIZE) \ 340 -o $(CONFIG_SYS_NAND_OOBSIZE) \ 341 -u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \ 342 -e $(CONFIG_SYS_NAND_BLOCK_SIZE) \ 343 -s -b $< $@ 344$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin 345 $(call if_changed,sunxi_spl_image_builder) 346 347# Rule to link u-boot-spl 348# May be overridden by arch/$(ARCH)/config.mk 349quiet_cmd_u-boot-spl ?= LD $@ 350 cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ 351 $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ 352 $(patsubst $(obj)/%,%,$(u-boot-spl-main)) \ 353 $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \ 354 --end-group \ 355 $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)) 356 357$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \ 358 $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE 359 $(call if_changed,u-boot-spl) 360 361$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ; 362 363PHONY += $(u-boot-spl-dirs) 364$(u-boot-spl-dirs): $(u-boot-spl-platdata) 365 $(Q)$(MAKE) $(build)=$@ 366 367quiet_cmd_cpp_lds = LDS $@ 368cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 369 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 370 371$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE 372 $(call if_changed_dep,cpp_lds) 373 374# read all saved command lines 375 376targets := $(wildcard $(sort $(targets))) 377cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 378 379ifneq ($(cmd_files),) 380 $(cmd_files): ; # Do not try to update included dependency files 381 include $(cmd_files) 382endif 383 384PHONY += FORCE 385FORCE: 386 387PHONY += dtbs 388dtbs: 389 $(Q)$(MAKE) $(build)=dts dtbs 390 391# Declare the contents of the .PHONY variable as phony. We keep that 392# information in a variable so we can use it in if_changed and friends. 393.PHONY: $(PHONY) 394 395SHRUNK_ARCH_DTB = $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) 396.SECONDEXPANSION: 397$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) 398 $(call if_changed,fdtgrep) 399 400MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ 401 -n "Multi DTB fit image for $(SPL_BIN)" -E \ 402 $(patsubst %,-b %,$(SHRUNK_ARCH_DTB)) 403 404$(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE 405 $(call if_changed,mkimage) 406 407$(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit 408 @gzip -kf9 $< > $@ 409 410$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit 411 @lzop -f9 $< > $@ 412