1# 2# (C) Copyright 2000-2011 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# (C) Copyright 2011 6# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com. 7# 8# (C) Copyright 2011 9# Texas Instruments Incorporated - http://www.ti.com/ 10# Aneesh V <aneesh@ti.com> 11# 12# SPDX-License-Identifier: GPL-2.0+ 13# 14# Based on top-level Makefile. 15# 16 17src := $(obj) 18 19# Create output directory if not already present 20_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 21 22include $(srctree)/scripts/Kbuild.include 23 24-include include/config/auto.conf 25-include $(obj)/include/autoconf.mk 26 27KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD 28ifeq ($(CONFIG_TPL_BUILD),y) 29KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD 30endif 31 32ifeq ($(CONFIG_TPL_BUILD),y) 33SPL_BIN := u-boot-tpl 34else 35SPL_BIN := u-boot-spl 36endif 37 38include $(srctree)/config.mk 39include $(srctree)/arch/$(ARCH)/Makefile 40 41# Enable garbage collection of un-used sections for SPL 42KBUILD_CFLAGS += -ffunction-sections -fdata-sections 43LDFLAGS_FINAL += --gc-sections 44 45# FIX ME 46cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 47 $(NOSTDINC_FLAGS) 48 49HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 50 51libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 52libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 53 54libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ 55libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ 56libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ 57libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/ 58libs-$(CONFIG_SPL_DM) += drivers/core/ 59libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/ 60libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/ 61libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/ 62libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/ 63libs-$(CONFIG_SYS_MVEBU_DDR_A38X) += drivers/ddr/marvell/a38x/ 64libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/ 65libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ 66libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ 67libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ 68libs-y += fs/ 69libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/ 70libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ 71libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/ 72libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/ 73libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/ 74libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/ 75libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/ 76libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/ 77libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/ 78libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ 79libs-$(CONFIG_SPL_NET_SUPPORT) += net/ 80libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/ 81libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/ 82libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/ 83libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/ 84libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/ 85libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/ 86libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/ 87libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/ 88libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/ 89libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/ 90 91head-y := $(addprefix $(obj)/,$(head-y)) 92libs-y := $(addprefix $(obj)/,$(libs-y)) 93u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) 94 95libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 96 97# Add GCC lib 98ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 99PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 100PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) 101endif 102 103u-boot-spl-init := $(head-y) 104u-boot-spl-main := $(libs-y) 105 106# Linker Script 107ifdef CONFIG_SPL_LDSCRIPT 108# need to strip off double quotes 109LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) 110endif 111 112ifeq ($(wildcard $(LDSCRIPT)),) 113 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds 114endif 115ifeq ($(wildcard $(LDSCRIPT)),) 116 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds 117endif 118ifeq ($(wildcard $(LDSCRIPT)),) 119 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds 120endif 121ifeq ($(wildcard $(LDSCRIPT)),) 122$(error could not find linker script) 123endif 124 125# Special flags for CPP when processing the linker script. 126# Pass the version down so we can handle backwards compatibility 127# on the fly. 128LDPPFLAGS += \ 129 -include $(srctree)/include/u-boot/u-boot.lds.h \ 130 -include $(objtree)/include/config.h \ 131 -DCPUDIR=$(CPUDIR) \ 132 $(shell $(LD) --version | \ 133 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 134 135quiet_cmd_mkimage = MKIMAGE $@ 136cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 137 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 138 139MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE) 140 141MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE) 142 143MLO MLO.byteswap: $(obj)/u-boot-spl.bin 144 $(call if_changed,mkimage) 145 146MKIMAGEFLAGS_boot.bin = -T atmelimage 147 148ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y) 149MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params) 150 151boot.bin: $(obj)/../tools/atmel_pmecc_params 152endif 153 154boot.bin: $(obj)/u-boot-spl.bin 155 $(call if_changed,mkimage) 156 157ALL-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg 158 159ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin 160 161ifdef CONFIG_SAMSUNG 162ALL-y += $(obj)/$(BOARD)-spl.bin 163endif 164 165ifdef CONFIG_SUNXI 166ALL-y += $(obj)/sunxi-spl.bin 167endif 168 169ifeq ($(CONFIG_SYS_SOC),"at91") 170ALL-y += boot.bin 171endif 172 173all: $(ALL-y) 174 175quiet_cmd_cat = CAT $@ 176cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 177 178$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \ 179 $(obj)/$(SPL_BIN).dtb FORCE 180 $(call if_changed,cat) 181 182# Create a file that pads from the end of u-boot-spl.bin to bss_end 183$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) 184 @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \ 185 dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null; 186 187# Pass the original device tree file through fdtgrep twice. The first pass 188# removes any unwanted nodes (i.e. those which don't have the 189# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second 190# pass removes various unused properties from the remaining nodes. 191# The output is typically a much smaller device tree file. 192quiet_cmd_fdtgrep = FDTGREP $@ 193 cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \ 194 -n /chosen -O dtb | \ 195 $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ 196 $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) 197 198$(obj)/$(SPL_BIN).dtb: dts/dt.dtb 199 $(call cmd,fdtgrep) 200 201quiet_cmd_cpp_cfg = CFG $@ 202cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 203 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< 204 205$(obj)/$(SPL_BIN).cfg: include/config.h 206 $(call if_changed,cpp_cfg) 207 208ifdef CONFIG_SAMSUNG 209ifdef CONFIG_VAR_SIZE_SPL 210VAR_SIZE_PARAM = --vs 211else 212VAR_SIZE_PARAM = 213endif 214$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin 215 $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\ 216 $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\ 217 $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@ 218endif 219 220quiet_cmd_objcopy = OBJCOPY $@ 221cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 222 223OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary 224 225$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE 226 $(call if_changed,objcopy) 227 228LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) 229ifneq ($(CONFIG_SPL_TEXT_BASE),) 230LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) 231endif 232 233ifdef CONFIG_SUNXI 234quiet_cmd_mksunxiboot = MKSUNXI $@ 235cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ 236$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin 237 $(call if_changed,mksunxiboot) 238endif 239 240quiet_cmd_u-boot-spl = LD $@ 241 cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ 242 $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \ 243 $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \ 244 $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)) 245 246$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE 247 $(call if_changed,u-boot-spl) 248 249$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ; 250 251PHONY += $(u-boot-spl-dirs) 252$(u-boot-spl-dirs): 253 $(Q)$(MAKE) $(build)=$@ 254 255quiet_cmd_cpp_lds = LDS $@ 256cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 257 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 258 259$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE 260 $(call if_changed_dep,cpp_lds) 261 262# read all saved command lines 263 264targets := $(wildcard $(sort $(targets))) 265cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 266 267ifneq ($(cmd_files),) 268 $(cmd_files): ; # Do not try to update included dependency files 269 include $(cmd_files) 270endif 271 272PHONY += FORCE 273FORCE: 274 275# Declare the contents of the .PHONY variable as phony. We keep that 276# information in a variable so we can use it in if_changed and friends. 277.PHONY: $(PHONY) 278