xref: /openbmc/u-boot/scripts/Makefile.spl (revision dd6fbcb9)

#
# (C) Copyright 2000-2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
#
# (C) Copyright 2011
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
#
# SPDX-License-Identifier:	GPL-2.0+
#
# Based on top-level Makefile.
#

src := $(obj)

# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))

include $(srctree)/scripts/Kbuild.include

-include include/config/auto.conf
-include $(obj)/include/autoconf.mk

KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
ifeq ($(CONFIG_TPL_BUILD),y)
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
endif

ifeq ($(CONFIG_TPL_BUILD),y)
SPL_BIN := u-boot-tpl
else
SPL_BIN := u-boot-spl
endif

ifdef CONFIG_SPL_BUILD
SPL_ := SPL_
ifeq ($(CONFIG_TPL_BUILD),y)
SPL_TPL_ := TPL_
else
SPL_TPL_ := SPL_
endif
else
SPL_ :=
SPL_TPL_ :=
endif

include $(srctree)/config.mk
include $(srctree)/arch/$(ARCH)/Makefile

# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections

# FIX ME
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
							$(NOSTDINC_FLAGS)
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)

HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)

libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/

libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-y += common/init/

# Special handling for a few options which support SPL/TPL
ifeq ($(CONFIG_TPL_BUILD),y)
libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
else
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
endif

libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
libs-y += dts/
libs-y += fs/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/

head-y		:= $(addprefix $(obj)/,$(head-y))
libs-y		:= $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y)))

libs-y := $(patsubst %/, %/built-in.o, $(libs-y))

# Add GCC lib
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
endif

u-boot-spl-init := $(head-y)
u-boot-spl-main := $(libs-y)
ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
endif

# Linker Script
# First test whether there's a linker-script for the specific stage defined...
ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
else
# ...then fall back to the generic SPL linker-script
ifneq ($(CONFIG_SPL_LDSCRIPT),)
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif
endif

ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif

# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
	-include $(srctree)/include/u-boot/u-boot.lds.h \
	-include $(objtree)/include/config.h \
	-DCPUDIR=$(CPUDIR) \
	$(shell $(LD) --version | \
	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')

MKIMAGEOUTPUT ?= /dev/null

quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
	$(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))

MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)

MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)

MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
	$(call if_changed,mkimage)

ifeq ($(CONFIG_SYS_SOC),"at91")
MKIMAGEFLAGS_boot.bin = -T atmelimage

ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)

boot.bin: $(obj)/../tools/atmel_pmecc_params
endif

boot.bin: $(obj)/u-boot-spl.bin FORCE
	$(call if_changed,mkimage)
else
ifdef CONFIG_ARCH_ZYNQ
MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
endif
ifdef CONFIG_ARCH_ZYNQMP
MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
endif

spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
	$(call if_changed,mkimage)
endif

ALL-y	+= $(obj)/$(SPL_BIN).bin

ifdef CONFIG_SAMSUNG
ALL-y	+= $(obj)/$(BOARD)-spl.bin
endif

ifdef CONFIG_ARCH_SOCFPGA
ALL-y	+= $(obj)/$(SPL_BIN).sfp
endif

ifdef CONFIG_ARCH_SUNXI
ALL-y	+= $(obj)/sunxi-spl.bin

ifdef CONFIG_NAND_SUNXI
ALL-y	+= $(obj)/sunxi-spl-with-ecc.bin
endif
endif

ifeq ($(CONFIG_SYS_SOC),"at91")
ALL-y	+= boot.bin
endif

ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin

ALL-$(CONFIG_ARCH_ZYNQ)		+= $(obj)/boot.bin
ALL-$(CONFIG_ARCH_ZYNQMP)	+= $(obj)/boot.bin

all:	$(ALL-y)

quiet_cmd_cat = CAT     $@
cmd_cat = cat $(filter-out $(PHONY), $^) > $@

quiet_cmd_copy = COPY    $@
      cmd_copy = cp $< $@

ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy)
$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
		$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
		$(obj)/$(SPL_BIN).dtb FORCE
	$(call if_changed,cat)

$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
	$(call if_changed,copy)
else
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
	$(call if_changed,copy)
endif

# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
	@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
	dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;

# Pass the original device tree file through fdtgrep twice. The first pass
# removes any unwanted nodes (i.e. those which don't have the
# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
# pass removes various unused properties from the remaining nodes.
# The output is typically a much smaller device tree file.
ifeq ($(CONFIG_TPL_BUILD),y)
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
else
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
endif
quiet_cmd_fdtgrep = FDTGREP $@
      cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
		-n /chosen -n /config -O dtb | \
	$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
		$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))

$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
	$(call if_changed,fdtgrep)

pythonpath = PYTHONPATH=tools

quiet_cmd_dtocc = DTOC C  $@
cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata

quiet_cmd_dtoch = DTOC H  $@
cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct

quiet_cmd_plat = PLAT    $@
cmd_plat = $(CC) $(c_flags) -c $< -o $@

$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c include/generated/dt-structs.h
	$(call if_changed,plat)

PHONY += dts_dir
dts_dir:
	$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)

include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
	$(call if_changed,dtoch)

$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
	$(call if_changed,dtocc)

ifdef CONFIG_SAMSUNG
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs
else
VAR_SIZE_PARAM =
endif
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
endif

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
		$(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)

$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
	$(call if_changed,objcopy)

OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
	$(call if_changed,objcopy)

LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)

# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)

# First try the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
else
# And then fall back to just testing for SPL_TEXT_BASE, even if in TPL mode
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif
endif

MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
	$(call if_changed,mkimage)

quiet_cmd_mksunxiboot = MKSUNXI $@
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \
			--default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
	$(call if_changed,mksunxiboot)

quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
				-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
				-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
				-o $(CONFIG_SYS_NAND_OOBSIZE) \
				-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
				-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
				-s -b $< $@
$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
	$(call if_changed,sunxi_spl_image_builder)

# Rule to link u-boot-spl
# May be overridden by arch/$(ARCH)/config.mk
quiet_cmd_u-boot-spl ?= LD      $@
      cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-main))  \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
		       --end-group \
		       $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))

$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
		$(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
	$(call if_changed,u-boot-spl)

$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;

PHONY += $(u-boot-spl-dirs)
$(u-boot-spl-dirs): $(u-boot-spl-platdata)
	$(Q)$(MAKE) $(build)=$@

quiet_cmd_cpp_lds = LDS     $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<

$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
	$(call if_changed_dep,cpp_lds)

# read all saved command lines

targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)
  $(cmd_files): ;	# Do not try to update included dependency files
  include $(cmd_files)
endif

checkdtoc: tools
	@if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \
		echo '*** dtoc needs the Python libfdt library. Either '; \
		echo '*** install it on your system, or try:'; \
		echo '***'; \
		echo '*** sudo apt-get install swig libpython-dev'; \
		echo '***'; \
		echo '*** to have U-Boot build its own version.'; \
		false; \
	fi

PHONY += FORCE
FORCE:

# Declare the contents of the .PHONY variable as phony.  We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)