1 /* 2 * (C) Copyright 2001-2015 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * Joe Hershberger, National Instruments 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <dm.h> 11 #include <environment.h> 12 #include <net.h> 13 #include <dm/device-internal.h> 14 #include <dm/uclass-internal.h> 15 #include "eth_internal.h" 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 /** 20 * struct eth_device_priv - private structure for each Ethernet device 21 * 22 * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t) 23 */ 24 struct eth_device_priv { 25 enum eth_state_t state; 26 }; 27 28 /** 29 * struct eth_uclass_priv - The structure attached to the uclass itself 30 * 31 * @current: The Ethernet device that the network functions are using 32 */ 33 struct eth_uclass_priv { 34 struct udevice *current; 35 }; 36 37 /* eth_errno - This stores the most recent failure code from DM functions */ 38 static int eth_errno; 39 40 static struct eth_uclass_priv *eth_get_uclass_priv(void) 41 { 42 struct uclass *uc; 43 44 uclass_get(UCLASS_ETH, &uc); 45 assert(uc); 46 return uc->priv; 47 } 48 49 void eth_set_current_to_next(void) 50 { 51 struct eth_uclass_priv *uc_priv; 52 53 uc_priv = eth_get_uclass_priv(); 54 if (uc_priv->current) 55 uclass_next_device(&uc_priv->current); 56 if (!uc_priv->current) 57 uclass_first_device(UCLASS_ETH, &uc_priv->current); 58 } 59 60 /* 61 * Typically this will simply return the active device. 62 * In the case where the most recent active device was unset, this will attempt 63 * to return the first device. If that device doesn't exist or fails to probe, 64 * this function will return NULL. 65 */ 66 struct udevice *eth_get_dev(void) 67 { 68 struct eth_uclass_priv *uc_priv; 69 70 uc_priv = eth_get_uclass_priv(); 71 if (!uc_priv->current) 72 eth_errno = uclass_first_device(UCLASS_ETH, 73 &uc_priv->current); 74 return uc_priv->current; 75 } 76 77 /* 78 * Typically this will just store a device pointer. 79 * In case it was not probed, we will attempt to do so. 80 * dev may be NULL to unset the active device. 81 */ 82 void eth_set_dev(struct udevice *dev) 83 { 84 if (dev && !device_active(dev)) { 85 eth_errno = device_probe(dev); 86 if (eth_errno) 87 dev = NULL; 88 } 89 90 eth_get_uclass_priv()->current = dev; 91 } 92 93 /* 94 * Find the udevice that either has the name passed in as devname or has an 95 * alias named devname. 96 */ 97 struct udevice *eth_get_dev_by_name(const char *devname) 98 { 99 int seq = -1; 100 char *endp = NULL; 101 const char *startp = NULL; 102 struct udevice *it; 103 struct uclass *uc; 104 int len = strlen("eth"); 105 106 /* Must be longer than 3 to be an alias */ 107 if (!strncmp(devname, "eth", len) && strlen(devname) > len) { 108 startp = devname + len; 109 seq = simple_strtoul(startp, &endp, 10); 110 } 111 112 uclass_get(UCLASS_ETH, &uc); 113 uclass_foreach_dev(it, uc) { 114 /* 115 * We need the seq to be valid, so try to probe it. 116 * If the probe fails, the seq will not match since it will be 117 * -1 instead of what we are looking for. 118 * We don't care about errors from probe here. Either they won't 119 * match an alias or it will match a literal name and we'll pick 120 * up the error when we try to probe again in eth_set_dev(). 121 */ 122 if (device_probe(it)) 123 continue; 124 /* Check for the name or the sequence number to match */ 125 if (strcmp(it->name, devname) == 0 || 126 (endp > startp && it->seq == seq)) 127 return it; 128 } 129 130 return NULL; 131 } 132 133 unsigned char *eth_get_ethaddr(void) 134 { 135 struct eth_pdata *pdata; 136 137 if (eth_get_dev()) { 138 pdata = eth_get_dev()->platdata; 139 return pdata->enetaddr; 140 } 141 142 return NULL; 143 } 144 145 /* Set active state without calling start on the driver */ 146 int eth_init_state_only(void) 147 { 148 struct udevice *current; 149 struct eth_device_priv *priv; 150 151 current = eth_get_dev(); 152 if (!current || !device_active(current)) 153 return -EINVAL; 154 155 priv = current->uclass_priv; 156 priv->state = ETH_STATE_ACTIVE; 157 158 return 0; 159 } 160 161 /* Set passive state without calling stop on the driver */ 162 void eth_halt_state_only(void) 163 { 164 struct udevice *current; 165 struct eth_device_priv *priv; 166 167 current = eth_get_dev(); 168 if (!current || !device_active(current)) 169 return; 170 171 priv = current->uclass_priv; 172 priv->state = ETH_STATE_PASSIVE; 173 } 174 175 int eth_get_dev_index(void) 176 { 177 if (eth_get_dev()) 178 return eth_get_dev()->seq; 179 return -1; 180 } 181 182 static int eth_write_hwaddr(struct udevice *dev) 183 { 184 struct eth_pdata *pdata; 185 int ret = 0; 186 187 if (!dev || !device_active(dev)) 188 return -EINVAL; 189 190 /* seq is valid since the device is active */ 191 if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) { 192 pdata = dev->platdata; 193 if (!is_valid_ethaddr(pdata->enetaddr)) { 194 printf("\nError: %s address %pM illegal value\n", 195 dev->name, pdata->enetaddr); 196 return -EINVAL; 197 } 198 199 /* 200 * Drivers are allowed to decide not to implement this at 201 * run-time. E.g. Some devices may use it and some may not. 202 */ 203 ret = eth_get_ops(dev)->write_hwaddr(dev); 204 if (ret == -ENOSYS) 205 ret = 0; 206 if (ret) 207 printf("\nWarning: %s failed to set MAC address\n", 208 dev->name); 209 } 210 211 return ret; 212 } 213 214 static int on_ethaddr(const char *name, const char *value, enum env_op op, 215 int flags) 216 { 217 int index; 218 int retval; 219 struct udevice *dev; 220 221 /* look for an index after "eth" */ 222 index = simple_strtoul(name + 3, NULL, 10); 223 224 retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev); 225 if (!retval) { 226 struct eth_pdata *pdata = dev->platdata; 227 switch (op) { 228 case env_op_create: 229 case env_op_overwrite: 230 eth_parse_enetaddr(value, pdata->enetaddr); 231 eth_write_hwaddr(dev); 232 break; 233 case env_op_delete: 234 memset(pdata->enetaddr, 0, ARP_HLEN); 235 } 236 } 237 238 return 0; 239 } 240 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); 241 242 int eth_init(void) 243 { 244 char *ethact = env_get("ethact"); 245 char *ethrotate = env_get("ethrotate"); 246 struct udevice *current = NULL; 247 struct udevice *old_current; 248 int ret = -ENODEV; 249 250 /* 251 * When 'ethrotate' variable is set to 'no' and 'ethact' variable 252 * is already set to an ethernet device, we should stick to 'ethact'. 253 */ 254 if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) { 255 if (ethact) { 256 current = eth_get_dev_by_name(ethact); 257 if (!current) 258 return -EINVAL; 259 } 260 } 261 262 if (!current) { 263 current = eth_get_dev(); 264 if (!current) { 265 printf("No ethernet found.\n"); 266 return -ENODEV; 267 } 268 } 269 270 old_current = current; 271 do { 272 if (current) { 273 debug("Trying %s\n", current->name); 274 275 if (device_active(current)) { 276 ret = eth_get_ops(current)->start(current); 277 if (ret >= 0) { 278 struct eth_device_priv *priv = 279 current->uclass_priv; 280 281 priv->state = ETH_STATE_ACTIVE; 282 return 0; 283 } 284 } else { 285 ret = eth_errno; 286 } 287 288 debug("FAIL\n"); 289 } else { 290 debug("PROBE FAIL\n"); 291 } 292 293 /* 294 * If ethrotate is enabled, this will change "current", 295 * otherwise we will drop out of this while loop immediately 296 */ 297 eth_try_another(0); 298 /* This will ensure the new "current" attempted to probe */ 299 current = eth_get_dev(); 300 } while (old_current != current); 301 302 return ret; 303 } 304 305 void eth_halt(void) 306 { 307 struct udevice *current; 308 struct eth_device_priv *priv; 309 310 current = eth_get_dev(); 311 if (!current || !device_active(current)) 312 return; 313 314 eth_get_ops(current)->stop(current); 315 priv = current->uclass_priv; 316 priv->state = ETH_STATE_PASSIVE; 317 } 318 319 int eth_is_active(struct udevice *dev) 320 { 321 struct eth_device_priv *priv; 322 323 if (!dev || !device_active(dev)) 324 return 0; 325 326 priv = dev_get_uclass_priv(dev); 327 return priv->state == ETH_STATE_ACTIVE; 328 } 329 330 int eth_send(void *packet, int length) 331 { 332 struct udevice *current; 333 int ret; 334 335 current = eth_get_dev(); 336 if (!current) 337 return -ENODEV; 338 339 if (!device_active(current)) 340 return -EINVAL; 341 342 ret = eth_get_ops(current)->send(current, packet, length); 343 if (ret < 0) { 344 /* We cannot completely return the error at present */ 345 debug("%s: send() returned error %d\n", __func__, ret); 346 } 347 return ret; 348 } 349 350 int eth_rx(void) 351 { 352 struct udevice *current; 353 uchar *packet; 354 int flags; 355 int ret; 356 int i; 357 358 current = eth_get_dev(); 359 if (!current) 360 return -ENODEV; 361 362 if (!device_active(current)) 363 return -EINVAL; 364 365 /* Process up to 32 packets at one time */ 366 flags = ETH_RECV_CHECK_DEVICE; 367 for (i = 0; i < 32; i++) { 368 ret = eth_get_ops(current)->recv(current, flags, &packet); 369 flags = 0; 370 if (ret > 0) 371 net_process_received_packet(packet, ret); 372 if (ret >= 0 && eth_get_ops(current)->free_pkt) 373 eth_get_ops(current)->free_pkt(current, packet, ret); 374 if (ret <= 0) 375 break; 376 } 377 if (ret == -EAGAIN) 378 ret = 0; 379 if (ret < 0) { 380 /* We cannot completely return the error at present */ 381 debug("%s: recv() returned error %d\n", __func__, ret); 382 } 383 return ret; 384 } 385 386 int eth_initialize(void) 387 { 388 int num_devices = 0; 389 struct udevice *dev; 390 391 eth_common_init(); 392 393 /* 394 * Devices need to write the hwaddr even if not started so that Linux 395 * will have access to the hwaddr that u-boot stored for the device. 396 * This is accomplished by attempting to probe each device and calling 397 * their write_hwaddr() operation. 398 */ 399 uclass_first_device(UCLASS_ETH, &dev); 400 if (!dev) { 401 printf("No ethernet found.\n"); 402 bootstage_error(BOOTSTAGE_ID_NET_ETH_START); 403 } else { 404 char *ethprime = env_get("ethprime"); 405 struct udevice *prime_dev = NULL; 406 407 if (ethprime) 408 prime_dev = eth_get_dev_by_name(ethprime); 409 if (prime_dev) { 410 eth_set_dev(prime_dev); 411 eth_current_changed(); 412 } else { 413 eth_set_dev(NULL); 414 } 415 416 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); 417 do { 418 if (num_devices) 419 printf(", "); 420 421 printf("eth%d: %s", dev->seq, dev->name); 422 423 if (ethprime && dev == prime_dev) 424 printf(" [PRIME]"); 425 426 eth_write_hwaddr(dev); 427 428 uclass_next_device(&dev); 429 num_devices++; 430 } while (dev); 431 432 putc('\n'); 433 } 434 435 return num_devices; 436 } 437 438 static int eth_post_bind(struct udevice *dev) 439 { 440 if (strchr(dev->name, ' ')) { 441 printf("\nError: eth device name \"%s\" has a space!\n", 442 dev->name); 443 return -EINVAL; 444 } 445 446 return 0; 447 } 448 449 static int eth_pre_unbind(struct udevice *dev) 450 { 451 /* Don't hang onto a pointer that is going away */ 452 if (dev == eth_get_uclass_priv()->current) 453 eth_set_dev(NULL); 454 455 return 0; 456 } 457 458 static int eth_post_probe(struct udevice *dev) 459 { 460 struct eth_device_priv *priv = dev->uclass_priv; 461 struct eth_pdata *pdata = dev->platdata; 462 unsigned char env_enetaddr[ARP_HLEN]; 463 464 #if defined(CONFIG_NEEDS_MANUAL_RELOC) 465 struct eth_ops *ops = eth_get_ops(dev); 466 static int reloc_done; 467 468 if (!reloc_done) { 469 if (ops->start) 470 ops->start += gd->reloc_off; 471 if (ops->send) 472 ops->send += gd->reloc_off; 473 if (ops->recv) 474 ops->recv += gd->reloc_off; 475 if (ops->free_pkt) 476 ops->free_pkt += gd->reloc_off; 477 if (ops->stop) 478 ops->stop += gd->reloc_off; 479 #ifdef CONFIG_MCAST_TFTP 480 if (ops->mcast) 481 ops->mcast += gd->reloc_off; 482 #endif 483 if (ops->write_hwaddr) 484 ops->write_hwaddr += gd->reloc_off; 485 if (ops->read_rom_hwaddr) 486 ops->read_rom_hwaddr += gd->reloc_off; 487 488 reloc_done++; 489 } 490 #endif 491 492 priv->state = ETH_STATE_INIT; 493 494 /* Check if the device has a MAC address in ROM */ 495 if (eth_get_ops(dev)->read_rom_hwaddr) 496 eth_get_ops(dev)->read_rom_hwaddr(dev); 497 498 eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr); 499 if (!is_zero_ethaddr(env_enetaddr)) { 500 if (!is_zero_ethaddr(pdata->enetaddr) && 501 memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) { 502 printf("\nWarning: %s MAC addresses don't match:\n", 503 dev->name); 504 printf("Address in ROM is %pM\n", 505 pdata->enetaddr); 506 printf("Address in environment is %pM\n", 507 env_enetaddr); 508 } 509 510 /* Override the ROM MAC address */ 511 memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN); 512 } else if (is_valid_ethaddr(pdata->enetaddr)) { 513 eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); 514 printf("\nWarning: %s using MAC address from ROM\n", 515 dev->name); 516 } else if (is_zero_ethaddr(pdata->enetaddr) || 517 !is_valid_ethaddr(pdata->enetaddr)) { 518 #ifdef CONFIG_NET_RANDOM_ETHADDR 519 net_random_ethaddr(pdata->enetaddr); 520 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", 521 dev->name, dev->seq, pdata->enetaddr); 522 #else 523 printf("\nError: %s address not set.\n", 524 dev->name); 525 return -EINVAL; 526 #endif 527 } 528 529 return 0; 530 } 531 532 static int eth_pre_remove(struct udevice *dev) 533 { 534 struct eth_pdata *pdata = dev->platdata; 535 536 eth_get_ops(dev)->stop(dev); 537 538 /* clear the MAC address */ 539 memset(pdata->enetaddr, 0, ARP_HLEN); 540 541 return 0; 542 } 543 544 UCLASS_DRIVER(eth) = { 545 .name = "eth", 546 .id = UCLASS_ETH, 547 .post_bind = eth_post_bind, 548 .pre_unbind = eth_pre_unbind, 549 .post_probe = eth_post_probe, 550 .pre_remove = eth_pre_remove, 551 .priv_auto_alloc_size = sizeof(struct eth_uclass_priv), 552 .per_device_auto_alloc_size = sizeof(struct eth_device_priv), 553 .flags = DM_UC_FLAG_SEQ_ALIAS, 554 }; 555