xref: /openbmc/u-boot/net/eth-uclass.c (revision 5396b2a9)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2001-2015
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  * Joe Hershberger, National Instruments
6  */
7 
8 #include <common.h>
9 #include <dm.h>
10 #include <environment.h>
11 #include <net.h>
12 #include <dm/device-internal.h>
13 #include <dm/uclass-internal.h>
14 #include "eth_internal.h"
15 
16 DECLARE_GLOBAL_DATA_PTR;
17 
18 /**
19  * struct eth_device_priv - private structure for each Ethernet device
20  *
21  * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
22  */
23 struct eth_device_priv {
24 	enum eth_state_t state;
25 };
26 
27 /**
28  * struct eth_uclass_priv - The structure attached to the uclass itself
29  *
30  * @current: The Ethernet device that the network functions are using
31  */
32 struct eth_uclass_priv {
33 	struct udevice *current;
34 };
35 
36 /* eth_errno - This stores the most recent failure code from DM functions */
37 static int eth_errno;
38 
39 static struct eth_uclass_priv *eth_get_uclass_priv(void)
40 {
41 	struct uclass *uc;
42 
43 	uclass_get(UCLASS_ETH, &uc);
44 	assert(uc);
45 	return uc->priv;
46 }
47 
48 void eth_set_current_to_next(void)
49 {
50 	struct eth_uclass_priv *uc_priv;
51 
52 	uc_priv = eth_get_uclass_priv();
53 	if (uc_priv->current)
54 		uclass_next_device(&uc_priv->current);
55 	if (!uc_priv->current)
56 		uclass_first_device(UCLASS_ETH, &uc_priv->current);
57 }
58 
59 /*
60  * Typically this will simply return the active device.
61  * In the case where the most recent active device was unset, this will attempt
62  * to return the first device. If that device doesn't exist or fails to probe,
63  * this function will return NULL.
64  */
65 struct udevice *eth_get_dev(void)
66 {
67 	struct eth_uclass_priv *uc_priv;
68 
69 	uc_priv = eth_get_uclass_priv();
70 	if (!uc_priv->current)
71 		eth_errno = uclass_first_device(UCLASS_ETH,
72 				    &uc_priv->current);
73 	return uc_priv->current;
74 }
75 
76 /*
77  * Typically this will just store a device pointer.
78  * In case it was not probed, we will attempt to do so.
79  * dev may be NULL to unset the active device.
80  */
81 void eth_set_dev(struct udevice *dev)
82 {
83 	if (dev && !device_active(dev)) {
84 		eth_errno = device_probe(dev);
85 		if (eth_errno)
86 			dev = NULL;
87 	}
88 
89 	eth_get_uclass_priv()->current = dev;
90 }
91 
92 /*
93  * Find the udevice that either has the name passed in as devname or has an
94  * alias named devname.
95  */
96 struct udevice *eth_get_dev_by_name(const char *devname)
97 {
98 	int seq = -1;
99 	char *endp = NULL;
100 	const char *startp = NULL;
101 	struct udevice *it;
102 	struct uclass *uc;
103 	int len = strlen("eth");
104 
105 	/* Must be longer than 3 to be an alias */
106 	if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
107 		startp = devname + len;
108 		seq = simple_strtoul(startp, &endp, 10);
109 	}
110 
111 	uclass_get(UCLASS_ETH, &uc);
112 	uclass_foreach_dev(it, uc) {
113 		/*
114 		 * We need the seq to be valid, so try to probe it.
115 		 * If the probe fails, the seq will not match since it will be
116 		 * -1 instead of what we are looking for.
117 		 * We don't care about errors from probe here. Either they won't
118 		 * match an alias or it will match a literal name and we'll pick
119 		 * up the error when we try to probe again in eth_set_dev().
120 		 */
121 		if (device_probe(it))
122 			continue;
123 		/* Check for the name or the sequence number to match */
124 		if (strcmp(it->name, devname) == 0 ||
125 		    (endp > startp && it->seq == seq))
126 			return it;
127 	}
128 
129 	return NULL;
130 }
131 
132 unsigned char *eth_get_ethaddr(void)
133 {
134 	struct eth_pdata *pdata;
135 
136 	if (eth_get_dev()) {
137 		pdata = eth_get_dev()->platdata;
138 		return pdata->enetaddr;
139 	}
140 
141 	return NULL;
142 }
143 
144 /* Set active state without calling start on the driver */
145 int eth_init_state_only(void)
146 {
147 	struct udevice *current;
148 	struct eth_device_priv *priv;
149 
150 	current = eth_get_dev();
151 	if (!current || !device_active(current))
152 		return -EINVAL;
153 
154 	priv = current->uclass_priv;
155 	priv->state = ETH_STATE_ACTIVE;
156 
157 	return 0;
158 }
159 
160 /* Set passive state without calling stop on the driver */
161 void eth_halt_state_only(void)
162 {
163 	struct udevice *current;
164 	struct eth_device_priv *priv;
165 
166 	current = eth_get_dev();
167 	if (!current || !device_active(current))
168 		return;
169 
170 	priv = current->uclass_priv;
171 	priv->state = ETH_STATE_PASSIVE;
172 }
173 
174 int eth_get_dev_index(void)
175 {
176 	if (eth_get_dev())
177 		return eth_get_dev()->seq;
178 	return -1;
179 }
180 
181 static int eth_write_hwaddr(struct udevice *dev)
182 {
183 	struct eth_pdata *pdata;
184 	int ret = 0;
185 
186 	if (!dev || !device_active(dev))
187 		return -EINVAL;
188 
189 	/* seq is valid since the device is active */
190 	if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
191 		pdata = dev->platdata;
192 		if (!is_valid_ethaddr(pdata->enetaddr)) {
193 			printf("\nError: %s address %pM illegal value\n",
194 			       dev->name, pdata->enetaddr);
195 			return -EINVAL;
196 		}
197 
198 		/*
199 		 * Drivers are allowed to decide not to implement this at
200 		 * run-time. E.g. Some devices may use it and some may not.
201 		 */
202 		ret = eth_get_ops(dev)->write_hwaddr(dev);
203 		if (ret == -ENOSYS)
204 			ret = 0;
205 		if (ret)
206 			printf("\nWarning: %s failed to set MAC address\n",
207 			       dev->name);
208 	}
209 
210 	return ret;
211 }
212 
213 static int on_ethaddr(const char *name, const char *value, enum env_op op,
214 	int flags)
215 {
216 	int index;
217 	int retval;
218 	struct udevice *dev;
219 
220 	/* look for an index after "eth" */
221 	index = simple_strtoul(name + 3, NULL, 10);
222 
223 	retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
224 	if (!retval) {
225 		struct eth_pdata *pdata = dev->platdata;
226 		switch (op) {
227 		case env_op_create:
228 		case env_op_overwrite:
229 			eth_parse_enetaddr(value, pdata->enetaddr);
230 			eth_write_hwaddr(dev);
231 			break;
232 		case env_op_delete:
233 			memset(pdata->enetaddr, 0, ARP_HLEN);
234 		}
235 	}
236 
237 	return 0;
238 }
239 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
240 
241 int eth_init(void)
242 {
243 	char *ethact = env_get("ethact");
244 	char *ethrotate = env_get("ethrotate");
245 	struct udevice *current = NULL;
246 	struct udevice *old_current;
247 	int ret = -ENODEV;
248 
249 	/*
250 	 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
251 	 * is already set to an ethernet device, we should stick to 'ethact'.
252 	 */
253 	if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
254 		if (ethact) {
255 			current = eth_get_dev_by_name(ethact);
256 			if (!current)
257 				return -EINVAL;
258 		}
259 	}
260 
261 	if (!current) {
262 		current = eth_get_dev();
263 		if (!current) {
264 			printf("No ethernet found.\n");
265 			return -ENODEV;
266 		}
267 	}
268 
269 	old_current = current;
270 	do {
271 		if (current) {
272 			debug("Trying %s\n", current->name);
273 
274 			if (device_active(current)) {
275 				ret = eth_get_ops(current)->start(current);
276 				if (ret >= 0) {
277 					struct eth_device_priv *priv =
278 						current->uclass_priv;
279 
280 					priv->state = ETH_STATE_ACTIVE;
281 					return 0;
282 				}
283 			} else {
284 				ret = eth_errno;
285 			}
286 
287 			debug("FAIL\n");
288 		} else {
289 			debug("PROBE FAIL\n");
290 		}
291 
292 		/*
293 		 * If ethrotate is enabled, this will change "current",
294 		 * otherwise we will drop out of this while loop immediately
295 		 */
296 		eth_try_another(0);
297 		/* This will ensure the new "current" attempted to probe */
298 		current = eth_get_dev();
299 	} while (old_current != current);
300 
301 	return ret;
302 }
303 
304 void eth_halt(void)
305 {
306 	struct udevice *current;
307 	struct eth_device_priv *priv;
308 
309 	current = eth_get_dev();
310 	if (!current || !eth_is_active(current))
311 		return;
312 
313 	eth_get_ops(current)->stop(current);
314 	priv = current->uclass_priv;
315 	if (priv)
316 		priv->state = ETH_STATE_PASSIVE;
317 }
318 
319 int eth_is_active(struct udevice *dev)
320 {
321 	struct eth_device_priv *priv;
322 
323 	if (!dev || !device_active(dev))
324 		return 0;
325 
326 	priv = dev_get_uclass_priv(dev);
327 	return priv->state == ETH_STATE_ACTIVE;
328 }
329 
330 int eth_send(void *packet, int length)
331 {
332 	struct udevice *current;
333 	int ret;
334 
335 	current = eth_get_dev();
336 	if (!current)
337 		return -ENODEV;
338 
339 	if (!eth_is_active(current))
340 		return -EINVAL;
341 
342 	ret = eth_get_ops(current)->send(current, packet, length);
343 	if (ret < 0) {
344 		/* We cannot completely return the error at present */
345 		debug("%s: send() returned error %d\n", __func__, ret);
346 	}
347 	return ret;
348 }
349 
350 int eth_rx(void)
351 {
352 	struct udevice *current;
353 	uchar *packet;
354 	int flags;
355 	int ret;
356 	int i;
357 
358 	current = eth_get_dev();
359 	if (!current)
360 		return -ENODEV;
361 
362 	if (!eth_is_active(current))
363 		return -EINVAL;
364 
365 	/* Process up to 32 packets at one time */
366 	flags = ETH_RECV_CHECK_DEVICE;
367 	for (i = 0; i < 32; i++) {
368 		ret = eth_get_ops(current)->recv(current, flags, &packet);
369 		flags = 0;
370 		if (ret > 0)
371 			net_process_received_packet(packet, ret);
372 		if (ret >= 0 && eth_get_ops(current)->free_pkt)
373 			eth_get_ops(current)->free_pkt(current, packet, ret);
374 		if (ret <= 0)
375 			break;
376 	}
377 	if (ret == -EAGAIN)
378 		ret = 0;
379 	if (ret < 0) {
380 		/* We cannot completely return the error at present */
381 		debug("%s: recv() returned error %d\n", __func__, ret);
382 	}
383 	return ret;
384 }
385 
386 int eth_initialize(void)
387 {
388 	int num_devices = 0;
389 	struct udevice *dev;
390 
391 	eth_common_init();
392 
393 #ifdef CONFIG_MDIO
394 	uclass_first_device_check(UCLASS_MDIO, &dev);
395 	if (!dev)
396 		printf("No MDIO found.\n");
397 #endif
398 	/*
399 	 * Devices need to write the hwaddr even if not started so that Linux
400 	 * will have access to the hwaddr that u-boot stored for the device.
401 	 * This is accomplished by attempting to probe each device and calling
402 	 * their write_hwaddr() operation.
403 	 */
404 	uclass_first_device_check(UCLASS_ETH, &dev);
405 	if (!dev) {
406 		printf("No ethernet found.\n");
407 		bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
408 	} else {
409 		char *ethprime = env_get("ethprime");
410 		struct udevice *prime_dev = NULL;
411 
412 		if (ethprime)
413 			prime_dev = eth_get_dev_by_name(ethprime);
414 		if (prime_dev) {
415 			eth_set_dev(prime_dev);
416 			eth_current_changed();
417 		} else {
418 			eth_set_dev(NULL);
419 		}
420 
421 		bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
422 		do {
423 			if (num_devices)
424 				printf(", ");
425 
426 			printf("eth%d: %s", dev->seq, dev->name);
427 
428 			if (ethprime && dev == prime_dev)
429 				printf(" [PRIME]");
430 
431 			eth_write_hwaddr(dev);
432 
433 			uclass_next_device_check(&dev);
434 			num_devices++;
435 		} while (dev);
436 
437 		putc('\n');
438 	}
439 
440 	return num_devices;
441 }
442 
443 static int eth_post_bind(struct udevice *dev)
444 {
445 	if (strchr(dev->name, ' ')) {
446 		printf("\nError: eth device name \"%s\" has a space!\n",
447 		       dev->name);
448 		return -EINVAL;
449 	}
450 
451 	return 0;
452 }
453 
454 static int eth_pre_unbind(struct udevice *dev)
455 {
456 	/* Don't hang onto a pointer that is going away */
457 	if (dev == eth_get_uclass_priv()->current)
458 		eth_set_dev(NULL);
459 
460 	return 0;
461 }
462 
463 static int eth_post_probe(struct udevice *dev)
464 {
465 	struct eth_device_priv *priv = dev->uclass_priv;
466 	struct eth_pdata *pdata = dev->platdata;
467 	unsigned char env_enetaddr[ARP_HLEN];
468 
469 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
470 	struct eth_ops *ops = eth_get_ops(dev);
471 	static int reloc_done;
472 
473 	if (!reloc_done) {
474 		if (ops->start)
475 			ops->start += gd->reloc_off;
476 		if (ops->send)
477 			ops->send += gd->reloc_off;
478 		if (ops->recv)
479 			ops->recv += gd->reloc_off;
480 		if (ops->free_pkt)
481 			ops->free_pkt += gd->reloc_off;
482 		if (ops->stop)
483 			ops->stop += gd->reloc_off;
484 		if (ops->mcast)
485 			ops->mcast += gd->reloc_off;
486 		if (ops->write_hwaddr)
487 			ops->write_hwaddr += gd->reloc_off;
488 		if (ops->read_rom_hwaddr)
489 			ops->read_rom_hwaddr += gd->reloc_off;
490 
491 		reloc_done++;
492 	}
493 #endif
494 
495 	priv->state = ETH_STATE_INIT;
496 
497 	/* Check if the device has a MAC address in ROM */
498 	if (eth_get_ops(dev)->read_rom_hwaddr)
499 		eth_get_ops(dev)->read_rom_hwaddr(dev);
500 
501 	eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
502 	if (!is_zero_ethaddr(env_enetaddr)) {
503 		if (!is_zero_ethaddr(pdata->enetaddr) &&
504 		    memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
505 			printf("\nWarning: %s MAC addresses don't match:\n",
506 			       dev->name);
507 			printf("Address in ROM is          %pM\n",
508 			       pdata->enetaddr);
509 			printf("Address in environment is  %pM\n",
510 			       env_enetaddr);
511 		}
512 
513 		/* Override the ROM MAC address */
514 		memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
515 	} else if (is_valid_ethaddr(pdata->enetaddr)) {
516 		eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
517 		printf("\nWarning: %s using MAC address from ROM\n",
518 		       dev->name);
519 	} else if (is_zero_ethaddr(pdata->enetaddr) ||
520 		   !is_valid_ethaddr(pdata->enetaddr)) {
521 #ifdef CONFIG_NET_RANDOM_ETHADDR
522 		net_random_ethaddr(pdata->enetaddr);
523 		printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
524 		       dev->name, dev->seq, pdata->enetaddr);
525 #else
526 		printf("\nError: %s address not set.\n",
527 		       dev->name);
528 		return -EINVAL;
529 #endif
530 	}
531 
532 	return 0;
533 }
534 
535 static int eth_pre_remove(struct udevice *dev)
536 {
537 	struct eth_pdata *pdata = dev->platdata;
538 
539 	eth_get_ops(dev)->stop(dev);
540 
541 	/* clear the MAC address */
542 	memset(pdata->enetaddr, 0, ARP_HLEN);
543 
544 	return 0;
545 }
546 
547 UCLASS_DRIVER(eth) = {
548 	.name		= "eth",
549 	.id		= UCLASS_ETH,
550 	.post_bind	= eth_post_bind,
551 	.pre_unbind	= eth_pre_unbind,
552 	.post_probe	= eth_post_probe,
553 	.pre_remove	= eth_pre_remove,
554 	.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
555 	.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
556 	.flags		= DM_UC_FLAG_SEQ_ALIAS,
557 };
558