1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * efi_selftest_block
4  *
5  * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
6  *
7  * This test checks the driver for block IO devices.
8  * A disk image is created in memory.
9  * A handle is created for the new block IO device.
10  * The block I/O protocol is installed on the handle.
11  * ConnectController is used to setup partitions and to install the simple
12  * file protocol.
13  * A known file is read from the file system and verified.
14  */
15 
16 #include <efi_selftest.h>
17 #include "efi_selftest_disk_image.h"
18 
19 /* Block size of compressed disk image */
20 #define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8
21 
22 /* Binary logarithm of the block size */
23 #define LB_BLOCK_SIZE 9
24 
25 static struct efi_boot_services *boottime;
26 
27 static const efi_guid_t block_io_protocol_guid = BLOCK_IO_GUID;
28 static const efi_guid_t guid_device_path = DEVICE_PATH_GUID;
29 static const efi_guid_t guid_simple_file_system_protocol =
30 					EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID;
31 static const efi_guid_t guid_file_system_info = EFI_FILE_SYSTEM_INFO_GUID;
32 static efi_guid_t guid_vendor =
33 	EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d,
34 		 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xb7, 0xb8);
35 
36 static struct efi_device_path *dp;
37 
38 /* One 8 byte block of the compressed disk image */
39 struct line {
40 	size_t addr;
41 	char *line;
42 };
43 
44 /* Compressed disk image */
45 struct compressed_disk_image {
46 	size_t length;
47 	struct line lines[];
48 };
49 
50 static const struct compressed_disk_image img = EFI_ST_DISK_IMG;
51 
52 /* Decompressed disk image */
53 static u8 *image;
54 
55 /*
56  * Reset service of the block IO protocol.
57  *
58  * @this	block IO protocol
59  * @return	status code
60  */
61 static efi_status_t EFIAPI reset(
62 			struct efi_block_io *this,
63 			char extended_verification)
64 {
65 	return EFI_SUCCESS;
66 }
67 
68 /*
69  * Read service of the block IO protocol.
70  *
71  * @this	block IO protocol
72  * @media_id	media id
73  * @lba		start of the read in logical blocks
74  * @buffer_size	number of bytes to read
75  * @buffer	target buffer
76  * @return	status code
77  */
78 static efi_status_t EFIAPI read_blocks(
79 			struct efi_block_io *this, u32 media_id, u64 lba,
80 			efi_uintn_t buffer_size, void *buffer)
81 {
82 	u8 *start;
83 
84 	if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length)
85 		return EFI_INVALID_PARAMETER;
86 	start = image + (lba << LB_BLOCK_SIZE);
87 
88 	boottime->copy_mem(buffer, start, buffer_size);
89 
90 	return EFI_SUCCESS;
91 }
92 
93 /*
94  * Write service of the block IO protocol.
95  *
96  * @this	block IO protocol
97  * @media_id	media id
98  * @lba		start of the write in logical blocks
99  * @buffer_size	number of bytes to read
100  * @buffer	source buffer
101  * @return	status code
102  */
103 static efi_status_t EFIAPI write_blocks(
104 			struct efi_block_io *this, u32 media_id, u64 lba,
105 			efi_uintn_t buffer_size, void *buffer)
106 {
107 	u8 *start;
108 
109 	if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length)
110 		return EFI_INVALID_PARAMETER;
111 	start = image + (lba << LB_BLOCK_SIZE);
112 
113 	boottime->copy_mem(start, buffer, buffer_size);
114 
115 	return EFI_SUCCESS;
116 }
117 
118 /*
119  * Flush service of the block IO protocol.
120  *
121  * @this	block IO protocol
122  * @return	status code
123  */
124 static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this)
125 {
126 	return EFI_SUCCESS;
127 }
128 
129 /*
130  * Decompress the disk image.
131  *
132  * @image	decompressed disk image
133  * @return	status code
134  */
135 static efi_status_t decompress(u8 **image)
136 {
137 	u8 *buf;
138 	size_t i;
139 	size_t addr;
140 	size_t len;
141 	efi_status_t ret;
142 
143 	ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length,
144 				      (void **)&buf);
145 	if (ret != EFI_SUCCESS) {
146 		efi_st_error("Out of memory\n");
147 		return ret;
148 	}
149 	boottime->set_mem(buf, img.length, 0);
150 
151 	for (i = 0; ; ++i) {
152 		if (!img.lines[i].line)
153 			break;
154 		addr = img.lines[i].addr;
155 		len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE;
156 		if (addr + len > img.length)
157 			len = img.length - addr;
158 		boottime->copy_mem(buf + addr, img.lines[i].line, len);
159 	}
160 	*image = buf;
161 	return ret;
162 }
163 
164 static struct efi_block_io_media media;
165 
166 static struct efi_block_io block_io = {
167 	.media = &media,
168 	.reset = reset,
169 	.read_blocks = read_blocks,
170 	.write_blocks = write_blocks,
171 	.flush_blocks = flush_blocks,
172 };
173 
174 /* Handle for the block IO device */
175 static efi_handle_t disk_handle;
176 
177 /*
178  * Setup unit test.
179  *
180  * @handle:	handle of the loaded image
181  * @systable:	system table
182  * @return:	EFI_ST_SUCCESS for success
183  */
184 static int setup(const efi_handle_t handle,
185 		 const struct efi_system_table *systable)
186 {
187 	efi_status_t ret;
188 	struct efi_device_path_vendor vendor_node;
189 	struct efi_device_path end_node;
190 
191 	boottime = systable->boottime;
192 
193 	decompress(&image);
194 
195 	block_io.media->block_size = 1 << LB_BLOCK_SIZE;
196 	block_io.media->last_block = img.length >> LB_BLOCK_SIZE;
197 
198 	ret = boottime->install_protocol_interface(
199 				&disk_handle, &block_io_protocol_guid,
200 				EFI_NATIVE_INTERFACE, &block_io);
201 	if (ret != EFI_SUCCESS) {
202 		efi_st_error("Failed to install block I/O protocol\n");
203 		return EFI_ST_FAILURE;
204 	}
205 
206 	ret = boottime->allocate_pool(EFI_LOADER_DATA,
207 				      sizeof(struct efi_device_path_vendor) +
208 				      sizeof(struct efi_device_path),
209 				      (void **)&dp);
210 	if (ret != EFI_SUCCESS) {
211 		efi_st_error("Out of memory\n");
212 		return EFI_ST_FAILURE;
213 	}
214 	vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE;
215 	vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR;
216 	vendor_node.dp.length = sizeof(struct efi_device_path_vendor);
217 
218 	boottime->copy_mem(&vendor_node.guid, &guid_vendor,
219 			   sizeof(efi_guid_t));
220 	boottime->copy_mem(dp, &vendor_node,
221 			   sizeof(struct efi_device_path_vendor));
222 	end_node.type = DEVICE_PATH_TYPE_END;
223 	end_node.sub_type = DEVICE_PATH_SUB_TYPE_END;
224 	end_node.length = sizeof(struct efi_device_path);
225 
226 	boottime->copy_mem((char *)dp + sizeof(struct efi_device_path_vendor),
227 			   &end_node, sizeof(struct efi_device_path));
228 	ret = boottime->install_protocol_interface(&disk_handle,
229 						   &guid_device_path,
230 						   EFI_NATIVE_INTERFACE,
231 						   dp);
232 	if (ret != EFI_SUCCESS) {
233 		efi_st_error("InstallProtocolInterface failed\n");
234 		return EFI_ST_FAILURE;
235 	}
236 	return EFI_ST_SUCCESS;
237 }
238 
239 /*
240  * Tear down unit test.
241  *
242  * @return:	EFI_ST_SUCCESS for success
243  */
244 static int teardown(void)
245 {
246 	efi_status_t r = EFI_ST_SUCCESS;
247 
248 	if (disk_handle) {
249 		r = boottime->uninstall_protocol_interface(disk_handle,
250 							   &guid_device_path,
251 							   dp);
252 		if (r != EFI_SUCCESS) {
253 			efi_st_error("Uninstall device path failed\n");
254 			return EFI_ST_FAILURE;
255 		}
256 		r = boottime->uninstall_protocol_interface(
257 				disk_handle, &block_io_protocol_guid,
258 				&block_io);
259 		if (r != EFI_SUCCESS) {
260 			efi_st_todo(
261 				"Failed to uninstall block I/O protocol\n");
262 			return EFI_ST_SUCCESS;
263 		}
264 	}
265 
266 	if (image) {
267 		r = efi_free_pool(image);
268 		if (r != EFI_SUCCESS) {
269 			efi_st_error("Failed to free image\n");
270 			return EFI_ST_FAILURE;
271 		}
272 	}
273 	return r;
274 }
275 
276 /*
277  * Get length of device path without end tag.
278  *
279  * @dp		device path
280  * @return	length of device path in bytes
281  */
282 static efi_uintn_t dp_size(struct efi_device_path *dp)
283 {
284 	struct efi_device_path *pos = dp;
285 
286 	while (pos->type != DEVICE_PATH_TYPE_END)
287 		pos = (struct efi_device_path *)((char *)pos + pos->length);
288 	return (char *)pos - (char *)dp;
289 }
290 
291 /*
292  * Execute unit test.
293  *
294  * @return:	EFI_ST_SUCCESS for success
295  */
296 static int execute(void)
297 {
298 	efi_status_t ret;
299 	efi_uintn_t no_handles, i, len;
300 	efi_handle_t *handles;
301 	efi_handle_t handle_partition = NULL;
302 	struct efi_device_path *dp_partition;
303 	struct efi_simple_file_system_protocol *file_system;
304 	struct efi_file_handle *root, *file;
305 	struct {
306 		struct efi_file_system_info info;
307 		u16 label[12];
308 	} system_info;
309 	efi_uintn_t buf_size;
310 	char buf[16] __aligned(ARCH_DMA_MINALIGN);
311 	u64 pos;
312 
313 	/* Connect controller to virtual disk */
314 	ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
315 	if (ret != EFI_SUCCESS) {
316 		efi_st_error("Failed to connect controller\n");
317 		return EFI_ST_FAILURE;
318 	}
319 
320 	/* Get the handle for the partition */
321 	ret = boottime->locate_handle_buffer(
322 				BY_PROTOCOL, &guid_device_path, NULL,
323 				&no_handles, &handles);
324 	if (ret != EFI_SUCCESS) {
325 		efi_st_error("Failed to locate handles\n");
326 		return EFI_ST_FAILURE;
327 	}
328 	len = dp_size(dp);
329 	for (i = 0; i < no_handles; ++i) {
330 		ret = boottime->open_protocol(handles[i], &guid_device_path,
331 					      (void **)&dp_partition,
332 					      NULL, NULL,
333 					      EFI_OPEN_PROTOCOL_GET_PROTOCOL);
334 		if (ret != EFI_SUCCESS) {
335 			efi_st_error("Failed to open device path protocol\n");
336 			return EFI_ST_FAILURE;
337 		}
338 		if (len >= dp_size(dp_partition))
339 			continue;
340 		if (efi_st_memcmp(dp, dp_partition, len))
341 			continue;
342 		handle_partition = handles[i];
343 		break;
344 	}
345 	ret = boottime->free_pool(handles);
346 	if (ret != EFI_SUCCESS) {
347 		efi_st_error("Failed to free pool memory\n");
348 		return EFI_ST_FAILURE;
349 	}
350 	if (!handle_partition) {
351 		efi_st_error("Partition handle not found\n");
352 		return EFI_ST_FAILURE;
353 	}
354 
355 	/* Open the simple file system protocol */
356 	ret = boottime->open_protocol(handle_partition,
357 				      &guid_simple_file_system_protocol,
358 				      (void **)&file_system, NULL, NULL,
359 				      EFI_OPEN_PROTOCOL_GET_PROTOCOL);
360 	if (ret != EFI_SUCCESS) {
361 		efi_st_error("Failed to open simple file system protocol\n");
362 		return EFI_ST_FAILURE;
363 	}
364 
365 	/* Open volume */
366 	ret = file_system->open_volume(file_system, &root);
367 	if (ret != EFI_SUCCESS) {
368 		efi_st_error("Failed to open volume\n");
369 		return EFI_ST_FAILURE;
370 	}
371 	buf_size = sizeof(system_info);
372 	ret = root->getinfo(root, &guid_file_system_info, &buf_size,
373 			    &system_info);
374 	if (ret != EFI_SUCCESS) {
375 		efi_st_error("Failed to get file system info\n");
376 		return EFI_ST_FAILURE;
377 	}
378 	if (system_info.info.block_size != 512) {
379 		efi_st_error("Wrong block size %u, expected 512\n",
380 			     system_info.info.block_size);
381 		return EFI_ST_FAILURE;
382 	}
383 	if (efi_st_strcmp_16_8(system_info.info.volume_label, "U-BOOT TEST")) {
384 		efi_st_todo(
385 			"Wrong volume label '%ps', expected 'U-BOOT TEST'\n",
386 			system_info.info.volume_label);
387 	}
388 
389 	/* Read file */
390 	ret = root->open(root, &file, L"hello.txt", EFI_FILE_MODE_READ,
391 			 0);
392 	if (ret != EFI_SUCCESS) {
393 		efi_st_error("Failed to open file\n");
394 		return EFI_ST_FAILURE;
395 	}
396 	ret = file->setpos(file, 1);
397 	if (ret != EFI_SUCCESS) {
398 		efi_st_error("SetPosition failed\n");
399 		return EFI_ST_FAILURE;
400 	}
401 	buf_size = sizeof(buf) - 1;
402 	ret = file->read(file, &buf_size, buf);
403 	if (ret != EFI_SUCCESS) {
404 		efi_st_error("Failed to read file\n");
405 		return EFI_ST_FAILURE;
406 	}
407 	if (buf_size != 12) {
408 		efi_st_error("Wrong number of bytes read: %u\n",
409 			     (unsigned int)buf_size);
410 		return EFI_ST_FAILURE;
411 	}
412 	if (efi_st_memcmp(buf, "ello world!", 11)) {
413 		efi_st_error("Unexpected file content\n");
414 		return EFI_ST_FAILURE;
415 	}
416 	ret = file->getpos(file, &pos);
417 	if (ret != EFI_SUCCESS) {
418 		efi_st_error("GetPosition failed\n");
419 		return EFI_ST_FAILURE;
420 	}
421 	if (pos != 13) {
422 		efi_st_error("GetPosition returned %u, expected 13\n",
423 			     (unsigned int)pos);
424 		return EFI_ST_FAILURE;
425 	}
426 	ret = file->close(file);
427 	if (ret != EFI_SUCCESS) {
428 		efi_st_error("Failed to close file\n");
429 		return EFI_ST_FAILURE;
430 	}
431 
432 #ifdef CONFIG_FAT_WRITE
433 	/* Write file */
434 	ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ |
435 			 EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE, 0);
436 	if (ret != EFI_SUCCESS) {
437 		efi_st_error("Failed to open file\n");
438 		return EFI_ST_FAILURE;
439 	}
440 	buf_size = 7;
441 	boottime->set_mem(buf, sizeof(buf), 0);
442 	boottime->copy_mem(buf, "U-Boot", buf_size);
443 	ret = file->write(file, &buf_size, buf);
444 	if (ret != EFI_SUCCESS || buf_size != 7) {
445 		efi_st_error("Failed to write file\n");
446 		return EFI_ST_FAILURE;
447 	}
448 	ret = file->getpos(file, &pos);
449 	if (ret != EFI_SUCCESS) {
450 		efi_st_error("GetPosition failed\n");
451 		return EFI_ST_FAILURE;
452 	}
453 	if (pos != 7) {
454 		efi_st_error("GetPosition returned %u, expected 7\n",
455 			     (unsigned int)pos);
456 		return EFI_ST_FAILURE;
457 	}
458 	ret = file->close(file);
459 	if (ret != EFI_SUCCESS) {
460 		efi_st_error("Failed to close file\n");
461 		return EFI_ST_FAILURE;
462 	}
463 
464 	/* Verify file */
465 	boottime->set_mem(buf, sizeof(buf), 0);
466 	ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ,
467 			 0);
468 	if (ret != EFI_SUCCESS) {
469 		efi_st_error("Failed to open file\n");
470 		return EFI_ST_FAILURE;
471 	}
472 	buf_size = sizeof(buf) - 1;
473 	ret = file->read(file, &buf_size, buf);
474 	if (ret != EFI_SUCCESS) {
475 		efi_st_error("Failed to read file\n");
476 		return EFI_ST_FAILURE;
477 	}
478 	if (buf_size != 7) {
479 		efi_st_error("Wrong number of bytes read: %u\n",
480 			     (unsigned int)buf_size);
481 		return EFI_ST_FAILURE;
482 	}
483 	if (efi_st_memcmp(buf, "U-Boot", 7)) {
484 		efi_st_error("Unexpected file content %s\n", buf);
485 		return EFI_ST_FAILURE;
486 	}
487 	ret = file->close(file);
488 	if (ret != EFI_SUCCESS) {
489 		efi_st_error("Failed to close file\n");
490 		return EFI_ST_FAILURE;
491 	}
492 #else
493 	efi_st_todo("CONFIG_FAT_WRITE is not set\n");
494 #endif /* CONFIG_FAT_WRITE */
495 
496 	/* Close volume */
497 	ret = root->close(root);
498 	if (ret != EFI_SUCCESS) {
499 		efi_st_error("Failed to close volume\n");
500 		return EFI_ST_FAILURE;
501 	}
502 
503 	return EFI_ST_SUCCESS;
504 }
505 
506 EFI_UNIT_TEST(blkdev) = {
507 	.name = "block device",
508 	.phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
509 	.setup = setup,
510 	.execute = execute,
511 	.teardown = teardown,
512 };
513