1 /*
2  * EFI efi_selftest
3  *
4  * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8 
9 #include <efi_selftest.h>
10 #include <vsprintf.h>
11 
12 static const struct efi_system_table *systable;
13 static const struct efi_boot_services *boottime;
14 static const struct efi_runtime_services *runtime;
15 static efi_handle_t handle;
16 static u16 reset_message[] = L"Selftest completed";
17 
18 /*
19  * Exit the boot services.
20  *
21  * The size of the memory map is determined.
22  * Pool memory is allocated to copy the memory map.
23  * The memory amp is copied and the map key is obtained.
24  * The map key is used to exit the boot services.
25  */
26 void efi_st_exit_boot_services(void)
27 {
28 	unsigned long  map_size = 0;
29 	unsigned long  map_key;
30 	unsigned long desc_size;
31 	u32 desc_version;
32 	efi_status_t ret;
33 	struct efi_mem_desc *memory_map;
34 
35 	ret = boottime->get_memory_map(&map_size, NULL, &map_key, &desc_size,
36 				       &desc_version);
37 	if (ret != EFI_BUFFER_TOO_SMALL) {
38 		efi_st_printf("ERROR: GetMemoryMap did not return "
39 			      "EFI_BUFFER_TOO_SMALL\n");
40 		return;
41 	}
42 	/* Allocate extra space for newly allocated memory */
43 	map_size += sizeof(struct efi_mem_desc);
44 	ret = boottime->allocate_pool(EFI_BOOT_SERVICES_DATA, map_size,
45 				      (void **)&memory_map);
46 	if (ret != EFI_SUCCESS) {
47 		efi_st_printf("ERROR: AllocatePool did not return "
48 			      "EFI_SUCCESS\n");
49 		return;
50 	}
51 	ret = boottime->get_memory_map(&map_size, memory_map, &map_key,
52 				       &desc_size, &desc_version);
53 	if (ret != EFI_SUCCESS) {
54 		efi_st_printf("ERROR: GetMemoryMap did not return "
55 			      "EFI_SUCCESS\n");
56 		return;
57 	}
58 	ret = boottime->exit_boot_services(handle, map_key);
59 	if (ret != EFI_SUCCESS) {
60 		efi_st_printf("ERROR: ExitBootServices did not return "
61 			      "EFI_SUCCESS\n");
62 		return;
63 	}
64 	efi_st_printf("\nBoot services terminated\n");
65 }
66 
67 /*
68  * Set up a test.
69  *
70  * @test	the test to be executed
71  * @failures	counter that will be incremented if a failure occurs
72  */
73 static int setup(struct efi_unit_test *test, unsigned int *failures)
74 {
75 	int ret;
76 
77 	if (!test->setup)
78 		return 0;
79 	efi_st_printf("\nSetting up '%s'\n", test->name);
80 	ret = test->setup(handle, systable);
81 	if (ret) {
82 		efi_st_printf("ERROR: Setting up '%s' failed\n", test->name);
83 		++*failures;
84 	} else {
85 		efi_st_printf("Setting up '%s' succeeded\n", test->name);
86 	}
87 	return ret;
88 }
89 
90 /*
91  * Execute a test.
92  *
93  * @test	the test to be executed
94  * @failures	counter that will be incremented if a failure occurs
95  */
96 static int execute(struct efi_unit_test *test, unsigned int *failures)
97 {
98 	int ret;
99 
100 	if (!test->execute)
101 		return 0;
102 	efi_st_printf("\nExecuting '%s'\n", test->name);
103 	ret = test->execute();
104 	if (ret) {
105 		efi_st_printf("ERROR: Executing '%s' failed\n", test->name);
106 		++*failures;
107 	} else {
108 		efi_st_printf("Executing '%s' succeeded\n", test->name);
109 	}
110 	return ret;
111 }
112 
113 /*
114  * Tear down a test.
115  *
116  * @test	the test to be torn down
117  * @failures	counter that will be incremented if a failure occurs
118  */
119 static int teardown(struct efi_unit_test *test, unsigned int *failures)
120 {
121 	int ret;
122 
123 	if (!test->teardown)
124 		return 0;
125 	efi_st_printf("\nTearing down '%s'\n", test->name);
126 	ret = test->teardown();
127 	if (ret) {
128 		efi_st_printf("ERROR: Tearing down '%s' failed\n", test->name);
129 		++*failures;
130 	} else {
131 		efi_st_printf("Tearing down '%s' succeeded\n", test->name);
132 	}
133 	return ret;
134 }
135 
136 /*
137  * Execute selftest of the EFI API
138  *
139  * This is the main entry point of the EFI selftest application.
140  *
141  * All tests use a driver model and are run in three phases:
142  * setup, execute, teardown.
143  *
144  * A test may be setup and executed at boottime,
145  * it may be setup at boottime and executed at runtime,
146  * or it may be setup and executed at runtime.
147  *
148  * After executing all tests the system is reset.
149  *
150  * @image_handle:	handle of the loaded EFI image
151  * @systab:		EFI system table
152  */
153 efi_status_t EFIAPI efi_selftest(efi_handle_t image_handle,
154 				 struct efi_system_table *systab)
155 {
156 	struct efi_unit_test *test;
157 	unsigned int failures = 0;
158 
159 	systable = systab;
160 	boottime = systable->boottime;
161 	runtime = systable->runtime;
162 	handle = image_handle;
163 	con_out = systable->con_out;
164 	con_in = systable->con_in;
165 
166 	efi_st_printf("\nTesting EFI API implementation\n");
167 
168 	efi_st_printf("\nNumber of tests to execute: %u\n",
169 		      ll_entry_count(struct efi_unit_test, efi_unit_test));
170 
171 	/* Execute boottime tests */
172 	for (test = ll_entry_start(struct efi_unit_test, efi_unit_test);
173 	     test < ll_entry_end(struct efi_unit_test, efi_unit_test); ++test) {
174 		if (test->phase == EFI_EXECUTE_BEFORE_BOOTTIME_EXIT) {
175 			setup(test, &failures);
176 			execute(test, &failures);
177 			teardown(test, &failures);
178 		}
179 	}
180 
181 	/* Execute mixed tests */
182 	for (test = ll_entry_start(struct efi_unit_test, efi_unit_test);
183 	     test < ll_entry_end(struct efi_unit_test, efi_unit_test); ++test) {
184 		if (test->phase == EFI_SETUP_BEFORE_BOOTTIME_EXIT)
185 			setup(test, &failures);
186 	}
187 
188 	efi_st_exit_boot_services();
189 
190 	for (test = ll_entry_start(struct efi_unit_test, efi_unit_test);
191 	     test < ll_entry_end(struct efi_unit_test, efi_unit_test); ++test) {
192 		if (test->phase == EFI_SETUP_BEFORE_BOOTTIME_EXIT) {
193 			execute(test, &failures);
194 			teardown(test, &failures);
195 		}
196 	}
197 
198 	/* Execute runtime tests */
199 	for (test = ll_entry_start(struct efi_unit_test, efi_unit_test);
200 	     test < ll_entry_end(struct efi_unit_test, efi_unit_test); ++test) {
201 		if (test->phase == EFI_SETUP_AFTER_BOOTTIME_EXIT) {
202 			setup(test, &failures);
203 			execute(test, &failures);
204 			teardown(test, &failures);
205 		}
206 	}
207 
208 	/* Give feedback */
209 	efi_st_printf("\nSummary: %u failures\n\n", failures);
210 
211 	/* Reset system */
212 	efi_st_printf("Preparing for reset. Press any key.\n");
213 	efi_st_get_key();
214 	runtime->reset_system(EFI_RESET_WARM, EFI_NOT_READY,
215 			      sizeof(reset_message), reset_message);
216 	efi_st_printf("\nERROR: reset failed.\n");
217 
218 	return EFI_UNSUPPORTED;
219 }
220