1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 4 */ 5 6 #ifndef _WINBOND_W83627_H_ 7 #define _WINBOND_W83627_H_ 8 9 /* I/O address of Winbond Super IO chip */ 10 #define WINBOND_IO_PORT 0x2e 11 12 /* Logical device number */ 13 #define W83627DHG_FDC 0 /* Floppy */ 14 #define W83627DHG_PP 1 /* Parallel port */ 15 #define W83627DHG_SP1 2 /* Com1 */ 16 #define W83627DHG_SP2 3 /* Com2 */ 17 #define W83627DHG_KBC 5 /* PS/2 keyboard & mouse */ 18 #define W83627DHG_SPI 6 /* Serial peripheral interface */ 19 #define W83627DHG_WDTO_PLED 8 /* WDTO#, PLED */ 20 #define W83627DHG_ACPI 10 /* ACPI */ 21 #define W83627DHG_HWM 11 /* Hardware monitor */ 22 #define W83627DHG_PECI_SST 12 /* PECI, SST */ 23 24 /** 25 * Configure the base I/O port of the specified serial device and enable the 26 * serial device. 27 * 28 * @dev: high 8 bits = super I/O port, low 8 bits = logical device number 29 * @iobase: processor I/O port address to assign to this serial device 30 * @irq: processor IRQ number to assign to this serial device 31 */ 32 void winbond_enable_serial(uint dev, uint iobase, uint irq); 33 34 #endif /* _WINBOND_W83627_H_ */ 35