1 /* 2 * (C) Copyright 2003 3 * Gerry Hamel, geh@ti.com, Texas Instruments 4 * 5 * Based on linux/drivers/usbd/usbd.h 6 * 7 * Copyright (c) 2000, 2001, 2002 Lineo 8 * Copyright (c) 2001 Hewlett Packard 9 * 10 * By: 11 * Stuart Lynne <sl@lineo.com>, 12 * Tom Rushworth <tbr@lineo.com>, 13 * Bruce Balden <balden@lineo.com> 14 * 15 * SPDX-License-Identifier: GPL-2.0+ 16 */ 17 18 #ifndef __USBDCORE_H__ 19 #define __USBDCORE_H__ 20 21 #include <common.h> 22 #include "usbdescriptors.h" 23 24 25 #define MAX_URBS_QUEUED 5 26 27 28 #if 1 29 #define usberr(fmt,args...) serial_printf("ERROR: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) 30 #else 31 #define usberr(fmt,args...) do{}while(0) 32 #endif 33 34 #if 0 35 #define usbdbg(fmt,args...) serial_printf("debug: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) 36 #else 37 #define usbdbg(fmt,args...) do{}while(0) 38 #endif 39 40 #if 0 41 #define usbinfo(fmt,args...) serial_printf("info: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args) 42 #else 43 #define usbinfo(fmt,args...) do{}while(0) 44 #endif 45 46 #ifndef le16_to_cpu 47 #define le16_to_cpu(x) (x) 48 #endif 49 50 #ifndef inb 51 #define inb(p) (*(volatile u8*)(p)) 52 #endif 53 54 #ifndef outb 55 #define outb(val,p) (*(volatile u8*)(p) = (val)) 56 #endif 57 58 #ifndef inw 59 #define inw(p) (*(volatile u16*)(p)) 60 #endif 61 62 #ifndef outw 63 #define outw(val,p) (*(volatile u16*)(p) = (val)) 64 #endif 65 66 #ifndef inl 67 #define inl(p) (*(volatile u32*)(p)) 68 #endif 69 70 #ifndef outl 71 #define outl(val,p) (*(volatile u32*)(p) = (val)) 72 #endif 73 74 #ifndef insw 75 #define insw(p,to,len) mmio_insw(p,to,len) 76 #endif 77 78 #ifndef outsw 79 #define outsw(p,from,len) mmio_outsw(p,from,len) 80 #endif 81 82 #ifndef insb 83 #define insb(p,to,len) mmio_insb(p,to,len) 84 #endif 85 86 #ifndef mmio_insw 87 #define mmio_insw(r,b,l) ({ int __i ; \ 88 u16 *__b2; \ 89 __b2 = (u16 *) b; \ 90 for (__i = 0; __i < l; __i++) { \ 91 *(__b2 + __i) = inw(r); \ 92 }; \ 93 }) 94 #endif 95 96 #ifndef mmio_outsw 97 #define mmio_outsw(r,b,l) ({ int __i; \ 98 u16 *__b2; \ 99 __b2 = (u16 *) b; \ 100 for (__i = 0; __i < l; __i++) { \ 101 outw( *(__b2 + __i), r); \ 102 } \ 103 }) 104 #endif 105 106 #ifndef mmio_insb 107 #define mmio_insb(r,b,l) ({ int __i ; \ 108 u8 *__b2; \ 109 __b2 = (u8 *) b; \ 110 for (__i = 0; __i < l; __i++) { \ 111 *(__b2 + __i) = inb(r); \ 112 }; \ 113 }) 114 #endif 115 116 /* 117 * Structure member address manipulation macros. 118 * These are used by client code (code using the urb_link routines), since 119 * the urb_link structure is embedded in the client data structures. 120 * 121 * Note: a macro offsetof equivalent to member_offset is defined in stddef.h 122 * but this is kept here for the sake of portability. 123 * 124 * p2surround returns a pointer to the surrounding structure given 125 * type of the surrounding structure, the name memb of the structure 126 * member pointed at by ptr. For example, if you have: 127 * 128 * struct foo { 129 * int x; 130 * float y; 131 * char z; 132 * } thingy; 133 * 134 * char *cp = &thingy.z; 135 * 136 * then 137 * 138 * &thingy == p2surround(struct foo, z, cp) 139 * 140 * Clear? 141 */ 142 #define _cv_(ptr) ((char*)(void*)(ptr)) 143 #define member_offset(type,memb) (_cv_(&(((type*)0)->memb))-(char*)0) 144 #define p2surround(type,memb,ptr) ((type*)(void*)(_cv_(ptr)-member_offset(type,memb))) 145 146 struct urb; 147 148 struct usb_endpoint_instance; 149 struct usb_interface_instance; 150 struct usb_configuration_instance; 151 struct usb_device_instance; 152 struct usb_bus_instance; 153 154 /* 155 * Device and/or Interface Class codes 156 */ 157 #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ 158 #define USB_CLASS_AUDIO 1 159 #define USB_CLASS_COMM 2 160 #define USB_CLASS_HID 3 161 #define USB_CLASS_PHYSICAL 5 162 #define USB_CLASS_PRINTER 7 163 #define USB_CLASS_MASS_STORAGE 8 164 #define USB_CLASS_HUB 9 165 #define USB_CLASS_DATA 10 166 #define USB_CLASS_APP_SPEC 0xfe 167 #define USB_CLASS_VENDOR_SPEC 0xff 168 169 /* 170 * USB types 171 */ 172 #define USB_TYPE_STANDARD (0x00 << 5) 173 #define USB_TYPE_CLASS (0x01 << 5) 174 #define USB_TYPE_VENDOR (0x02 << 5) 175 #define USB_TYPE_RESERVED (0x03 << 5) 176 177 /* 178 * USB recipients 179 */ 180 #define USB_RECIP_DEVICE 0x00 181 #define USB_RECIP_INTERFACE 0x01 182 #define USB_RECIP_ENDPOINT 0x02 183 #define USB_RECIP_OTHER 0x03 184 185 /* 186 * USB directions 187 */ 188 #define USB_DIR_OUT 0 189 #define USB_DIR_IN 0x80 190 191 /* 192 * Descriptor types 193 */ 194 #define USB_DT_DEVICE 0x01 195 #define USB_DT_CONFIG 0x02 196 #define USB_DT_STRING 0x03 197 #define USB_DT_INTERFACE 0x04 198 #define USB_DT_ENDPOINT 0x05 199 200 #if defined(CONFIG_USBD_HS) 201 #define USB_DT_QUAL 0x06 202 #endif 203 204 #define USB_DT_HID (USB_TYPE_CLASS | 0x01) 205 #define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) 206 #define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) 207 #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) 208 209 /* 210 * Descriptor sizes per descriptor type 211 */ 212 #define USB_DT_DEVICE_SIZE 18 213 #define USB_DT_CONFIG_SIZE 9 214 #define USB_DT_INTERFACE_SIZE 9 215 #define USB_DT_ENDPOINT_SIZE 7 216 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ 217 #define USB_DT_HUB_NONVAR_SIZE 7 218 #define USB_DT_HID_SIZE 9 219 220 /* 221 * Endpoints 222 */ 223 #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ 224 #define USB_ENDPOINT_DIR_MASK 0x80 225 226 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ 227 #define USB_ENDPOINT_XFER_CONTROL 0 228 #define USB_ENDPOINT_XFER_ISOC 1 229 #define USB_ENDPOINT_XFER_BULK 2 230 #define USB_ENDPOINT_XFER_INT 3 231 232 /* 233 * USB Packet IDs (PIDs) 234 */ 235 #define USB_PID_UNDEF_0 0xf0 236 #define USB_PID_OUT 0xe1 237 #define USB_PID_ACK 0xd2 238 #define USB_PID_DATA0 0xc3 239 #define USB_PID_PING 0xb4 /* USB 2.0 */ 240 #define USB_PID_SOF 0xa5 241 #define USB_PID_NYET 0x96 /* USB 2.0 */ 242 #define USB_PID_DATA2 0x87 /* USB 2.0 */ 243 #define USB_PID_SPLIT 0x78 /* USB 2.0 */ 244 #define USB_PID_IN 0x69 245 #define USB_PID_NAK 0x5a 246 #define USB_PID_DATA1 0x4b 247 #define USB_PID_PREAMBLE 0x3c /* Token mode */ 248 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ 249 #define USB_PID_SETUP 0x2d 250 #define USB_PID_STALL 0x1e 251 #define USB_PID_MDATA 0x0f /* USB 2.0 */ 252 253 /* 254 * Standard requests 255 */ 256 #define USB_REQ_GET_STATUS 0x00 257 #define USB_REQ_CLEAR_FEATURE 0x01 258 #define USB_REQ_SET_FEATURE 0x03 259 #define USB_REQ_SET_ADDRESS 0x05 260 #define USB_REQ_GET_DESCRIPTOR 0x06 261 #define USB_REQ_SET_DESCRIPTOR 0x07 262 #define USB_REQ_GET_CONFIGURATION 0x08 263 #define USB_REQ_SET_CONFIGURATION 0x09 264 #define USB_REQ_GET_INTERFACE 0x0A 265 #define USB_REQ_SET_INTERFACE 0x0B 266 #define USB_REQ_SYNCH_FRAME 0x0C 267 268 #define USBD_DEVICE_REQUESTS(x) (((unsigned int)x <= USB_REQ_SYNCH_FRAME) ? usbd_device_requests[x] : "UNKNOWN") 269 270 /* 271 * HID requests 272 */ 273 #define USB_REQ_GET_REPORT 0x01 274 #define USB_REQ_GET_IDLE 0x02 275 #define USB_REQ_GET_PROTOCOL 0x03 276 #define USB_REQ_SET_REPORT 0x09 277 #define USB_REQ_SET_IDLE 0x0A 278 #define USB_REQ_SET_PROTOCOL 0x0B 279 280 281 /* 282 * USB Spec Release number 283 */ 284 285 #if defined(CONFIG_USBD_HS) 286 #define USB_BCD_VERSION 0x0200 287 #else 288 #define USB_BCD_VERSION 0x0110 289 #endif 290 291 292 /* 293 * Device Requests (c.f Table 9-2) 294 */ 295 296 #define USB_REQ_DIRECTION_MASK 0x80 297 #define USB_REQ_TYPE_MASK 0x60 298 #define USB_REQ_RECIPIENT_MASK 0x1f 299 300 #define USB_REQ_DEVICE2HOST 0x80 301 #define USB_REQ_HOST2DEVICE 0x00 302 303 #define USB_REQ_TYPE_STANDARD 0x00 304 #define USB_REQ_TYPE_CLASS 0x20 305 #define USB_REQ_TYPE_VENDOR 0x40 306 307 #define USB_REQ_RECIPIENT_DEVICE 0x00 308 #define USB_REQ_RECIPIENT_INTERFACE 0x01 309 #define USB_REQ_RECIPIENT_ENDPOINT 0x02 310 #define USB_REQ_RECIPIENT_OTHER 0x03 311 312 /* 313 * get status bits 314 */ 315 316 #define USB_STATUS_SELFPOWERED 0x01 317 #define USB_STATUS_REMOTEWAKEUP 0x02 318 319 #define USB_STATUS_HALT 0x01 320 321 /* 322 * descriptor types 323 */ 324 325 #define USB_DESCRIPTOR_TYPE_DEVICE 0x01 326 #define USB_DESCRIPTOR_TYPE_CONFIGURATION 0x02 327 #define USB_DESCRIPTOR_TYPE_STRING 0x03 328 #define USB_DESCRIPTOR_TYPE_INTERFACE 0x04 329 #define USB_DESCRIPTOR_TYPE_ENDPOINT 0x05 330 #define USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER 0x06 331 #define USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION 0x07 332 #define USB_DESCRIPTOR_TYPE_INTERFACE_POWER 0x08 333 #define USB_DESCRIPTOR_TYPE_HID 0x21 334 #define USB_DESCRIPTOR_TYPE_REPORT 0x22 335 336 #define USBD_DEVICE_DESCRIPTORS(x) (((unsigned int)x <= USB_DESCRIPTOR_TYPE_INTERFACE_POWER) ? \ 337 usbd_device_descriptors[x] : "UNKNOWN") 338 339 /* 340 * standard feature selectors 341 */ 342 #define USB_ENDPOINT_HALT 0x00 343 #define USB_DEVICE_REMOTE_WAKEUP 0x01 344 #define USB_TEST_MODE 0x02 345 346 347 /* USB Requests 348 * 349 */ 350 351 struct usb_device_request { 352 u8 bmRequestType; 353 u8 bRequest; 354 u16 wValue; 355 u16 wIndex; 356 u16 wLength; 357 } __attribute__ ((packed)); 358 359 360 /* USB Status 361 * 362 */ 363 typedef enum urb_send_status { 364 SEND_IN_PROGRESS, 365 SEND_FINISHED_OK, 366 SEND_FINISHED_ERROR, 367 RECV_READY, 368 RECV_OK, 369 RECV_ERROR 370 } urb_send_status_t; 371 372 /* 373 * Device State (c.f USB Spec 2.0 Figure 9-1) 374 * 375 * What state the usb device is in. 376 * 377 * Note the state does not change if the device is suspended, we simply set a 378 * flag to show that it is suspended. 379 * 380 */ 381 typedef enum usb_device_state { 382 STATE_INIT, /* just initialized */ 383 STATE_CREATED, /* just created */ 384 STATE_ATTACHED, /* we are attached */ 385 STATE_POWERED, /* we have seen power indication (electrical bus signal) */ 386 STATE_DEFAULT, /* we been reset */ 387 STATE_ADDRESSED, /* we have been addressed (in default configuration) */ 388 STATE_CONFIGURED, /* we have seen a set configuration device command */ 389 STATE_UNKNOWN, /* destroyed */ 390 } usb_device_state_t; 391 392 #define USBD_DEVICE_STATE(x) (((unsigned int)x <= STATE_UNKNOWN) ? usbd_device_states[x] : "UNKNOWN") 393 394 /* 395 * Device status 396 * 397 * Overall state 398 */ 399 typedef enum usb_device_status { 400 USBD_OPENING, /* we are currently opening */ 401 USBD_OK, /* ok to use */ 402 USBD_SUSPENDED, /* we are currently suspended */ 403 USBD_CLOSING, /* we are currently closing */ 404 } usb_device_status_t; 405 406 #define USBD_DEVICE_STATUS(x) (((unsigned int)x <= USBD_CLOSING) ? usbd_device_status[x] : "UNKNOWN") 407 408 /* 409 * Device Events 410 * 411 * These are defined in the USB Spec (c.f USB Spec 2.0 Figure 9-1). 412 * 413 * There are additional events defined to handle some extra actions we need 414 * to have handled. 415 * 416 */ 417 typedef enum usb_device_event { 418 419 DEVICE_UNKNOWN, /* bi - unknown event */ 420 DEVICE_INIT, /* bi - initialize */ 421 DEVICE_CREATE, /* bi - */ 422 DEVICE_HUB_CONFIGURED, /* bi - bus has been plugged int */ 423 DEVICE_RESET, /* bi - hub has powered our port */ 424 425 DEVICE_ADDRESS_ASSIGNED, /* ep0 - set address setup received */ 426 DEVICE_CONFIGURED, /* ep0 - set configure setup received */ 427 DEVICE_SET_INTERFACE, /* ep0 - set interface setup received */ 428 429 DEVICE_SET_FEATURE, /* ep0 - set feature setup received */ 430 DEVICE_CLEAR_FEATURE, /* ep0 - clear feature setup received */ 431 432 DEVICE_DE_CONFIGURED, /* ep0 - set configure setup received for ?? */ 433 434 DEVICE_BUS_INACTIVE, /* bi - bus in inactive (no SOF packets) */ 435 DEVICE_BUS_ACTIVITY, /* bi - bus is active again */ 436 437 DEVICE_POWER_INTERRUPTION, /* bi - hub has depowered our port */ 438 DEVICE_HUB_RESET, /* bi - bus has been unplugged */ 439 DEVICE_DESTROY, /* bi - device instance should be destroyed */ 440 441 DEVICE_HOTPLUG, /* bi - a hotplug event has occurred */ 442 443 DEVICE_FUNCTION_PRIVATE, /* function - private */ 444 445 } usb_device_event_t; 446 447 448 typedef struct urb_link { 449 struct urb_link *next; 450 struct urb_link *prev; 451 } urb_link; 452 453 /* USB Data structure - for passing data around. 454 * 455 * This is used for both sending and receiving data. 456 * 457 * The callback function is used to let the function driver know when 458 * transmitted data has been sent. 459 * 460 * The callback function is set by the alloc_recv function when an urb is 461 * allocated for receiving data for an endpoint and used to call the 462 * function driver to inform it that data has arrived. 463 */ 464 465 /* in linux we'd malloc this, but in u-boot we prefer static data */ 466 #define URB_BUF_SIZE 512 467 468 struct urb { 469 470 struct usb_endpoint_instance *endpoint; 471 struct usb_device_instance *device; 472 473 struct usb_device_request device_request; /* contents of received SETUP packet */ 474 475 struct urb_link link; /* embedded struct for circular doubly linked list of urbs */ 476 477 u8* buffer; 478 unsigned int buffer_length; 479 unsigned int actual_length; 480 481 urb_send_status_t status; 482 int data; 483 484 u16 buffer_data[URB_BUF_SIZE]; /* data received (OUT) or being sent (IN) */ 485 }; 486 487 /* Endpoint configuration 488 * 489 * Per endpoint configuration data. Used to track which function driver owns 490 * an endpoint. 491 * 492 */ 493 struct usb_endpoint_instance { 494 int endpoint_address; /* logical endpoint address */ 495 496 /* control */ 497 int status; /* halted */ 498 int state; /* available for use by bus interface driver */ 499 500 /* receive side */ 501 struct urb_link rcv; /* received urbs */ 502 struct urb_link rdy; /* empty urbs ready to receive */ 503 struct urb *rcv_urb; /* active urb */ 504 int rcv_attributes; /* copy of bmAttributes from endpoint descriptor */ 505 int rcv_packetSize; /* maximum packet size from endpoint descriptor */ 506 int rcv_transferSize; /* maximum transfer size from function driver */ 507 int rcv_queue; 508 509 /* transmit side */ 510 struct urb_link tx; /* urbs ready to transmit */ 511 struct urb_link done; /* transmitted urbs */ 512 struct urb *tx_urb; /* active urb */ 513 int tx_attributes; /* copy of bmAttributes from endpoint descriptor */ 514 int tx_packetSize; /* maximum packet size from endpoint descriptor */ 515 int tx_transferSize; /* maximum transfer size from function driver */ 516 int tx_queue; 517 518 int sent; /* data already sent */ 519 int last; /* data sent in last packet XXX do we need this */ 520 }; 521 522 struct usb_alternate_instance { 523 struct usb_interface_descriptor *interface_descriptor; 524 525 int endpoints; 526 int *endpoint_transfersize_array; 527 struct usb_endpoint_descriptor **endpoints_descriptor_array; 528 }; 529 530 struct usb_interface_instance { 531 int alternates; 532 struct usb_alternate_instance *alternates_instance_array; 533 }; 534 535 struct usb_configuration_instance { 536 int interfaces; 537 struct usb_configuration_descriptor *configuration_descriptor; 538 struct usb_interface_instance *interface_instance_array; 539 }; 540 541 542 /* USB Device Instance 543 * 544 * For each physical bus interface we create a logical device structure. This 545 * tracks all of the required state to track the USB HOST's view of the device. 546 * 547 * Keep track of the device configuration for a real physical bus interface, 548 * this includes the bus interface, multiple function drivers, the current 549 * configuration and the current state. 550 * 551 * This will show: 552 * the specific bus interface driver 553 * the default endpoint 0 driver 554 * the configured function driver 555 * device state 556 * device status 557 * endpoint list 558 */ 559 560 struct usb_device_instance { 561 562 /* generic */ 563 char *name; 564 struct usb_device_descriptor *device_descriptor; /* per device descriptor */ 565 #if defined(CONFIG_USBD_HS) 566 struct usb_qualifier_descriptor *qualifier_descriptor; 567 #endif 568 569 void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); 570 571 /* Do cdc device specific control requests */ 572 int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); 573 574 /* bus interface */ 575 struct usb_bus_instance *bus; /* which bus interface driver */ 576 577 /* configuration descriptors */ 578 int configurations; 579 struct usb_configuration_instance *configuration_instance_array; 580 581 /* device state */ 582 usb_device_state_t device_state; /* current USB Device state */ 583 usb_device_state_t device_previous_state; /* current USB Device state */ 584 585 u8 address; /* current address (zero is default) */ 586 u8 configuration; /* current show configuration (zero is default) */ 587 u8 interface; /* current interface (zero is default) */ 588 u8 alternate; /* alternate flag */ 589 590 usb_device_status_t status; /* device status */ 591 592 int urbs_queued; /* number of submitted urbs */ 593 594 /* Shouldn't need to make this atomic, all we need is a change indicator */ 595 unsigned long usbd_rxtx_timestamp; 596 unsigned long usbd_last_rxtx_timestamp; 597 598 }; 599 600 /* Bus Interface configuration structure 601 * 602 * This is allocated for each configured instance of a bus interface driver. 603 * 604 * The privdata pointer may be used by the bus interface driver to store private 605 * per instance state information. 606 */ 607 struct usb_bus_instance { 608 609 struct usb_device_instance *device; 610 struct usb_endpoint_instance *endpoint_array; /* array of available configured endpoints */ 611 612 int max_endpoints; /* maximimum number of rx enpoints */ 613 unsigned char maxpacketsize; 614 615 unsigned int serial_number; 616 char *serial_number_str; 617 void *privdata; /* private data for the bus interface */ 618 619 }; 620 621 extern char *usbd_device_events[]; 622 extern char *usbd_device_states[]; 623 extern char *usbd_device_status[]; 624 extern char *usbd_device_requests[]; 625 extern char *usbd_device_descriptors[]; 626 627 void urb_link_init (urb_link * ul); 628 void urb_detach (struct urb *urb); 629 urb_link *first_urb_link (urb_link * hd); 630 struct urb *first_urb (urb_link * hd); 631 struct urb *first_urb_detached (urb_link * hd); 632 void urb_append (urb_link * hd, struct urb *urb); 633 634 struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint); 635 void usbd_dealloc_urb (struct urb *urb); 636 637 /* 638 * usbd_device_event is used by bus interface drivers to tell the higher layers that 639 * certain events have taken place. 640 */ 641 void usbd_device_event_irq (struct usb_device_instance *conf, usb_device_event_t, int); 642 void usbd_device_event (struct usb_device_instance *conf, usb_device_event_t, int); 643 644 /* descriptors 645 * 646 * Various ways of finding descriptors based on the current device and any 647 * possible configuration / interface / endpoint for it. 648 */ 649 struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct usb_device_instance *, int, int); 650 struct usb_function_instance *usbd_device_function_instance (struct usb_device_instance *, unsigned int); 651 struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *, int, int, int); 652 struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *, int, int, int, int); 653 struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance *, int, int, int, int); 654 struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance *, int, int, int, int, int); 655 struct usb_class_descriptor *usbd_device_class_descriptor_index (struct usb_device_instance *, int, int, int, int, int); 656 struct usb_class_report_descriptor *usbd_device_class_report_descriptor_index( struct usb_device_instance *, int , int , int , int , int ); 657 struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *, int, int, int, int, int); 658 int usbd_device_endpoint_transfersize (struct usb_device_instance *, int, int, int, int, int); 659 struct usb_string_descriptor *usbd_get_string (u8); 660 struct usb_device_descriptor *usbd_device_device_descriptor(struct 661 usb_device_instance *, int); 662 663 #if defined(CONFIG_USBD_HS) 664 /* 665 * is_usbd_high_speed routine needs to be defined by specific gadget driver 666 * It returns true if device enumerates at High speed 667 * Retuns false otherwise 668 */ 669 int is_usbd_high_speed(void); 670 #endif 671 int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint); 672 void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); 673 void usbd_tx_complete (struct usb_endpoint_instance *endpoint); 674 675 /* These are macros used in debugging */ 676 #ifdef DEBUG 677 static inline void print_urb(struct urb *u) 678 { 679 serial_printf("urb %p\n", (u)); 680 serial_printf("\tendpoint %p\n", u->endpoint); 681 serial_printf("\tdevice %p\n", u->device); 682 serial_printf("\tbuffer %p\n", u->buffer); 683 serial_printf("\tbuffer_length %d\n", u->buffer_length); 684 serial_printf("\tactual_length %d\n", u->actual_length); 685 serial_printf("\tstatus %d\n", u->status); 686 serial_printf("\tdata %d\n", u->data); 687 } 688 689 static inline void print_usb_device_request(struct usb_device_request *r) 690 { 691 serial_printf("usb request\n"); 692 serial_printf("\tbmRequestType 0x%2.2x\n", r->bmRequestType); 693 if ((r->bmRequestType & USB_REQ_DIRECTION_MASK) == 0) 694 serial_printf("\t\tDirection : To device\n"); 695 else 696 serial_printf("\t\tDirection : To host\n"); 697 if ((r->bmRequestType & USB_TYPE_STANDARD) == USB_TYPE_STANDARD) 698 serial_printf("\t\tType : Standard\n"); 699 if ((r->bmRequestType & USB_TYPE_CLASS) == USB_TYPE_CLASS) 700 serial_printf("\t\tType : Standard\n"); 701 if ((r->bmRequestType & USB_TYPE_VENDOR) == USB_TYPE_VENDOR) 702 serial_printf("\t\tType : Standard\n"); 703 if ((r->bmRequestType & USB_TYPE_RESERVED) == USB_TYPE_RESERVED) 704 serial_printf("\t\tType : Standard\n"); 705 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) == 706 USB_REQ_RECIPIENT_DEVICE) 707 serial_printf("\t\tRecipient : Device\n"); 708 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) == 709 USB_REQ_RECIPIENT_INTERFACE) 710 serial_printf("\t\tRecipient : Interface\n"); 711 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) == 712 USB_REQ_RECIPIENT_ENDPOINT) 713 serial_printf("\t\tRecipient : Endpoint\n"); 714 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) == 715 USB_REQ_RECIPIENT_OTHER) 716 serial_printf("\t\tRecipient : Other\n"); 717 serial_printf("\tbRequest 0x%2.2x\n", r->bRequest); 718 if (r->bRequest == USB_REQ_GET_STATUS) 719 serial_printf("\t\tGET_STATUS\n"); 720 else if (r->bRequest == USB_REQ_SET_ADDRESS) 721 serial_printf("\t\tSET_ADDRESS\n"); 722 else if (r->bRequest == USB_REQ_SET_FEATURE) 723 serial_printf("\t\tSET_FEATURE\n"); 724 else if (r->bRequest == USB_REQ_GET_DESCRIPTOR) 725 serial_printf("\t\tGET_DESCRIPTOR\n"); 726 else if (r->bRequest == USB_REQ_SET_CONFIGURATION) 727 serial_printf("\t\tSET_CONFIGURATION\n"); 728 else if (r->bRequest == USB_REQ_SET_INTERFACE) 729 serial_printf("\t\tUSB_REQ_SET_INTERFACE\n"); 730 else 731 serial_printf("\tUNKNOWN %d\n", r->bRequest); 732 serial_printf("\twValue 0x%4.4x\n", r->wValue); 733 if (r->bRequest == USB_REQ_GET_DESCRIPTOR) { 734 switch (r->wValue >> 8) { 735 case USB_DESCRIPTOR_TYPE_DEVICE: 736 serial_printf("\tDEVICE\n"); 737 break; 738 case USB_DESCRIPTOR_TYPE_CONFIGURATION: 739 serial_printf("\tCONFIGURATION\n"); 740 break; 741 case USB_DESCRIPTOR_TYPE_STRING: 742 serial_printf("\tSTRING\n"); 743 break; 744 case USB_DESCRIPTOR_TYPE_INTERFACE: 745 serial_printf("\tINTERFACE\n"); 746 break; 747 case USB_DESCRIPTOR_TYPE_ENDPOINT: 748 serial_printf("\tENDPOINT\n"); 749 break; 750 case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER: 751 serial_printf("\tDEVICE_QUALIFIER\n"); 752 break; 753 case USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION: 754 serial_printf("\tOTHER_SPEED_CONFIGURATION\n"); 755 break; 756 case USB_DESCRIPTOR_TYPE_INTERFACE_POWER: 757 serial_printf("\tINTERFACE_POWER\n"); 758 break; 759 case USB_DESCRIPTOR_TYPE_HID: 760 serial_printf("\tHID\n"); 761 break; 762 case USB_DESCRIPTOR_TYPE_REPORT: 763 serial_printf("\tREPORT\n"); 764 break; 765 default: 766 serial_printf("\tUNKNOWN TYPE\n"); 767 break; 768 } 769 } 770 serial_printf("\twIndex 0x%4.4x\n", r->wIndex); 771 serial_printf("\twLength 0x%4.4x\n", r->wLength); 772 } 773 #else 774 /* stubs */ 775 #define print_urb(u) 776 #define print_usb_device_request(r) 777 #endif /* DEBUG */ 778 #endif 779