xref: /openbmc/u-boot/include/usb/designware_udc.h (revision 4e3349b6)
1 /*
2  * (C) Copyright 2009
3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 #ifndef __DW_UDC_H
25 #define __DW_UDC_H
26 
27 /*
28  * Defines for  USBD
29  *
30  * The udc_ahb controller has three AHB slaves:
31  *
32  * 1.  THe UDC registers
33  * 2.  The plug detect
34  * 3.  The RX/TX FIFO
35  */
36 
37 #define MAX_ENDPOINTS		16
38 
39 struct udc_endp_regs {
40 	u32 endp_cntl;
41 	u32 endp_status;
42 	u32 endp_bsorfn;
43 	u32 endp_maxpacksize;
44 	u32 reserved_1;
45 	u32 endp_desc_point;
46 	u32 reserved_2;
47 	u32 write_done;
48 };
49 
50 /* Endpoint Control Register definitions */
51 
52 #define  ENDP_CNTL_STALL		0x00000001
53 #define  ENDP_CNTL_FLUSH		0x00000002
54 #define  ENDP_CNTL_SNOOP		0x00000004
55 #define  ENDP_CNTL_POLL			0x00000008
56 #define  ENDP_CNTL_CONTROL		0x00000000
57 #define  ENDP_CNTL_ISO			0x00000010
58 #define  ENDP_CNTL_BULK			0x00000020
59 #define  ENDP_CNTL_INT			0x00000030
60 #define  ENDP_CNTL_NAK			0x00000040
61 #define  ENDP_CNTL_SNAK			0x00000080
62 #define  ENDP_CNTL_CNAK			0x00000100
63 #define  ENDP_CNTL_RRDY			0x00000200
64 
65 /* Endpoint Satus Register definitions */
66 
67 #define  ENDP_STATUS_PIDMSK		0x0000000f
68 #define  ENDP_STATUS_OUTMSK		0x00000030
69 #define  ENDP_STATUS_OUT_NONE		0x00000000
70 #define  ENDP_STATUS_OUT_DATA		0x00000010
71 #define  ENDP_STATUS_OUT_SETUP		0x00000020
72 #define  ENDP_STATUS_IN			0x00000040
73 #define  ENDP_STATUS_BUFFNAV		0x00000080
74 #define  ENDP_STATUS_FATERR		0x00000100
75 #define  ENDP_STATUS_HOSTBUSERR		0x00000200
76 #define  ENDP_STATUS_TDC		0x00000400
77 #define  ENDP_STATUS_RXPKTMSK		0x003ff800
78 
79 struct udc_regs {
80 	struct udc_endp_regs in_regs[MAX_ENDPOINTS];
81 	struct udc_endp_regs out_regs[MAX_ENDPOINTS];
82 	u32 dev_conf;
83 	u32 dev_cntl;
84 	u32 dev_stat;
85 	u32 dev_int;
86 	u32 dev_int_mask;
87 	u32 endp_int;
88 	u32 endp_int_mask;
89 	u32 reserved_3[0x39];
90 	u32 reserved_4;		/* offset 0x500 */
91 	u32 udc_endp_reg[MAX_ENDPOINTS];
92 };
93 
94 /* Device Configuration Register definitions */
95 
96 #define  DEV_CONF_HS_SPEED		0x00000000
97 #define  DEV_CONF_LS_SPEED		0x00000002
98 #define  DEV_CONF_FS_SPEED		0x00000003
99 #define  DEV_CONF_REMWAKEUP		0x00000004
100 #define  DEV_CONF_SELFPOW		0x00000008
101 #define  DEV_CONF_SYNCFRAME		0x00000010
102 #define  DEV_CONF_PHYINT_8		0x00000020
103 #define  DEV_CONF_PHYINT_16		0x00000000
104 #define  DEV_CONF_UTMI_BIDIR		0x00000040
105 #define  DEV_CONF_STATUS_STALL		0x00000080
106 
107 /* Device Control Register definitions */
108 
109 #define  DEV_CNTL_RESUME		0x00000001
110 #define  DEV_CNTL_TFFLUSH		0x00000002
111 #define  DEV_CNTL_RXDMAEN		0x00000004
112 #define  DEV_CNTL_TXDMAEN		0x00000008
113 #define  DEV_CNTL_DESCRUPD		0x00000010
114 #define  DEV_CNTL_BIGEND		0x00000020
115 #define  DEV_CNTL_BUFFILL		0x00000040
116 #define  DEV_CNTL_TSHLDEN		0x00000080
117 #define  DEV_CNTL_BURSTEN		0x00000100
118 #define  DEV_CNTL_DMAMODE		0x00000200
119 #define  DEV_CNTL_SOFTDISCONNECT	0x00000400
120 #define  DEV_CNTL_SCALEDOWN		0x00000800
121 #define  DEV_CNTL_BURSTLENU		0x00010000
122 #define  DEV_CNTL_BURSTLENMSK		0x00ff0000
123 #define  DEV_CNTL_TSHLDLENU		0x01000000
124 #define  DEV_CNTL_TSHLDLENMSK		0xff000000
125 
126 /* Device Status Register definitions */
127 
128 #define  DEV_STAT_CFG			0x0000000f
129 #define  DEV_STAT_INTF			0x000000f0
130 #define  DEV_STAT_ALT			0x00000f00
131 #define  DEV_STAT_SUSP			0x00001000
132 #define  DEV_STAT_ENUM			0x00006000
133 #define  DEV_STAT_ENUM_SPEED_HS		0x00000000
134 #define  DEV_STAT_ENUM_SPEED_FS		0x00002000
135 #define  DEV_STAT_ENUM_SPEED_LS		0x00004000
136 #define  DEV_STAT_RXFIFO_EMPTY		0x00008000
137 #define  DEV_STAT_PHY_ERR		0x00010000
138 #define  DEV_STAT_TS			0xf0000000
139 
140 /* Device Interrupt Register definitions */
141 
142 #define  DEV_INT_MSK			0x0000007f
143 #define  DEV_INT_SETCFG			0x00000001
144 #define  DEV_INT_SETINTF		0x00000002
145 #define  DEV_INT_INACTIVE		0x00000004
146 #define  DEV_INT_USBRESET		0x00000008
147 #define  DEV_INT_SUSPUSB		0x00000010
148 #define  DEV_INT_SOF			0x00000020
149 #define  DEV_INT_ENUM			0x00000040
150 
151 /* Endpoint Interrupt Register definitions */
152 
153 #define  ENDP0_INT_CTRLIN		0x00000001
154 #define  ENDP1_INT_BULKIN		0x00000002
155 #define  ENDP_INT_NONISOIN_MSK		0x0000AAAA
156 #define  ENDP2_INT_BULKIN		0x00000004
157 #define  ENDP0_INT_CTRLOUT		0x00010000
158 #define  ENDP1_INT_BULKOUT		0x00020000
159 #define  ENDP2_INT_BULKOUT		0x00040000
160 #define  ENDP_INT_NONISOOUT_MSK		0x55540000
161 
162 /* Endpoint Register definitions */
163 #define  ENDP_EPDIR_OUT			0x00000000
164 #define  ENDP_EPDIR_IN			0x00000010
165 #define  ENDP_EPTYPE_CNTL		0x0
166 #define  ENDP_EPTYPE_ISO		0x1
167 #define  ENDP_EPTYPE_BULK		0x2
168 #define  ENDP_EPTYPE_INT		0x3
169 
170 /*
171  * Defines for Plug Detect
172  */
173 
174 struct plug_regs {
175 	u32 plug_state;
176 	u32 plug_pending;
177 };
178 
179 /* Plug State Register definitions */
180 #define  PLUG_STATUS_EN			0x1
181 #define  PLUG_STATUS_ATTACHED		0x2
182 #define  PLUG_STATUS_PHY_RESET		0x4
183 #define  PLUG_STATUS_PHY_MODE		0x8
184 
185 /*
186  * Defines for UDC FIFO (Slave Mode)
187  */
188 struct udcfifo_regs {
189 	u32 *fifo_p;
190 };
191 
192 /*
193  * USBTTY definitions
194  */
195 #define  EP0_MAX_PACKET_SIZE		64
196 #define  UDC_INT_ENDPOINT		1
197 #define  UDC_INT_PACKET_SIZE		64
198 #define  UDC_OUT_ENDPOINT		2
199 #define  UDC_BULK_PACKET_SIZE		64
200 #define  UDC_BULK_HS_PACKET_SIZE	512
201 #define  UDC_IN_ENDPOINT		3
202 #define  UDC_OUT_PACKET_SIZE		64
203 #define  UDC_IN_PACKET_SIZE		64
204 
205 /*
206  * UDC endpoint definitions
207  */
208 #define  UDC_EP0			0
209 #define  UDC_EP1			1
210 #define  UDC_EP2			2
211 #define  UDC_EP3			3
212 
213 /*
214  * Function declarations
215  */
216 
217 void udc_irq(void);
218 
219 void udc_set_nak(int epid);
220 void udc_unset_nak(int epid);
221 int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
222 int udc_init(void);
223 void udc_enable(struct usb_device_instance *device);
224 void udc_disable(void);
225 void udc_connect(void);
226 void udc_disconnect(void);
227 void udc_startup_events(struct usb_device_instance *device);
228 void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
229 		  struct usb_endpoint_instance *endpoint);
230 
231 #endif /* __DW_UDC_H */
232