xref: /openbmc/u-boot/include/tsec.h (revision 6d0f6bcf)
1 /*
2  *  tsec.h
3  *
4  *  Driver for the Motorola Triple Speed Ethernet Controller
5  *
6  *  This software may be used and distributed according to the
7  *  terms of the GNU Public License, Version 2, incorporated
8  *  herein by reference.
9  *
10  * Copyright 2004, 2007 Freescale Semiconductor, Inc.
11  * (C) Copyright 2003, Motorola, Inc.
12  * maintained by Xianghua Xiao (x.xiao@motorola.com)
13  * author Andy Fleming
14  *
15  */
16 
17 #ifndef __TSEC_H
18 #define __TSEC_H
19 
20 #include <net.h>
21 #include <config.h>
22 
23 #ifndef CONFIG_SYS_TSEC1_OFFSET
24     #define CONFIG_SYS_TSEC1_OFFSET	(0x24000)
25 #endif
26 
27 #define TSEC_SIZE	0x01000
28 
29 /* FIXME:  Should these be pushed back to 83xx and 85xx config files? */
30 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
31 	|| defined(CONFIG_MPC83XX)
32     #define TSEC_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
33 #endif
34 
35 #define STD_TSEC_INFO(num) \
36 {			\
37 	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
38 	.miiregs = (tsec_t *)TSEC_BASE_ADDR, \
39 	.devname = CONFIG_TSEC##num##_NAME, \
40 	.phyaddr = TSEC##num##_PHY_ADDR, \
41 	.flags = TSEC##num##_FLAGS \
42 }
43 
44 #define SET_STD_TSEC_INFO(x, num) \
45 {			\
46 	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
47 	x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \
48 	x.devname = CONFIG_TSEC##num##_NAME; \
49 	x.phyaddr = TSEC##num##_PHY_ADDR; \
50 	x.flags = TSEC##num##_FLAGS;\
51 }
52 
53 #define MAC_ADDR_LEN 6
54 
55 /* #define TSEC_TIMEOUT	1000000 */
56 #define TSEC_TIMEOUT 1000
57 #define TOUT_LOOP	1000000
58 
59 #define PHY_AUTONEGOTIATE_TIMEOUT	5000 /* in ms */
60 
61 /* TBI register addresses */
62 #define TBI_CR			0x00
63 #define TBI_SR			0x01
64 #define TBI_ANA			0x04
65 #define TBI_ANLPBPA		0x05
66 #define TBI_ANEX		0x06
67 #define TBI_TBICON		0x11
68 
69 /* TBI MDIO register bit fields*/
70 #define TBICON_CLK_SELECT	0x0020
71 #define TBIANA_ASYMMETRIC_PAUSE 0x0100
72 #define TBIANA_SYMMETRIC_PAUSE  0x0080
73 #define TBIANA_HALF_DUPLEX	0x0040
74 #define TBIANA_FULL_DUPLEX	0x0020
75 #define TBICR_PHY_RESET		0x8000
76 #define TBICR_ANEG_ENABLE	0x1000
77 #define TBICR_RESTART_ANEG	0x0200
78 #define TBICR_FULL_DUPLEX	0x0100
79 #define TBICR_SPEED1_SET	0x0040
80 
81 
82 /* MAC register bits */
83 #define MACCFG1_SOFT_RESET	0x80000000
84 #define MACCFG1_RESET_RX_MC	0x00080000
85 #define MACCFG1_RESET_TX_MC	0x00040000
86 #define MACCFG1_RESET_RX_FUN	0x00020000
87 #define	MACCFG1_RESET_TX_FUN	0x00010000
88 #define MACCFG1_LOOPBACK	0x00000100
89 #define MACCFG1_RX_FLOW		0x00000020
90 #define MACCFG1_TX_FLOW		0x00000010
91 #define MACCFG1_SYNCD_RX_EN	0x00000008
92 #define MACCFG1_RX_EN		0x00000004
93 #define MACCFG1_SYNCD_TX_EN	0x00000002
94 #define MACCFG1_TX_EN		0x00000001
95 
96 #define MACCFG2_INIT_SETTINGS	0x00007205
97 #define MACCFG2_FULL_DUPLEX	0x00000001
98 #define MACCFG2_IF		0x00000300
99 #define MACCFG2_GMII		0x00000200
100 #define MACCFG2_MII		0x00000100
101 
102 #define ECNTRL_INIT_SETTINGS	0x00001000
103 #define ECNTRL_TBI_MODE		0x00000020
104 #define ECNTRL_R100		0x00000008
105 #define ECNTRL_SGMII_MODE	0x00000002
106 
107 #define miim_end -2
108 #define miim_read -1
109 
110 #ifndef CONFIG_SYS_TBIPA_VALUE
111     #define CONFIG_SYS_TBIPA_VALUE	0x1f
112 #endif
113 #define MIIMCFG_INIT_VALUE	0x00000003
114 #define MIIMCFG_RESET		0x80000000
115 
116 #define MIIMIND_BUSY		0x00000001
117 #define MIIMIND_NOTVALID	0x00000004
118 
119 #define MIIM_CONTROL		0x00
120 #define MIIM_CONTROL_RESET	0x00009140
121 #define MIIM_CONTROL_INIT	0x00001140
122 #define MIIM_CONTROL_RESTART	0x00001340
123 #define MIIM_ANEN		0x00001000
124 
125 #define MIIM_CR			0x00
126 #define MIIM_CR_RST		0x00008000
127 #define MIIM_CR_INIT		0x00001000
128 
129 #define MIIM_STATUS		0x1
130 #define MIIM_STATUS_AN_DONE	0x00000020
131 #define MIIM_STATUS_LINK	0x0004
132 #define PHY_BMSR_AUTN_ABLE	0x0008
133 #define PHY_BMSR_AUTN_COMP	0x0020
134 
135 #define MIIM_PHYIR1		0x2
136 #define MIIM_PHYIR2		0x3
137 
138 #define MIIM_ANAR		0x4
139 #define MIIM_ANAR_INIT		0x1e1
140 
141 #define MIIM_TBI_ANLPBPA	0x5
142 #define MIIM_TBI_ANLPBPA_HALF	0x00000040
143 #define MIIM_TBI_ANLPBPA_FULL	0x00000020
144 
145 #define MIIM_TBI_ANEX		0x6
146 #define MIIM_TBI_ANEX_NP	0x00000004
147 #define MIIM_TBI_ANEX_PRX	0x00000002
148 
149 #define MIIM_GBIT_CONTROL	0x9
150 #define MIIM_GBIT_CONTROL_INIT	0xe00
151 
152 #define MIIM_EXT_PAGE_ACCESS	0x1f
153 
154 /* Broadcom BCM54xx -- taken from linux sungem_phy */
155 #define MIIM_BCM54xx_AUXSTATUS			0x19
156 #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK	0x0700
157 #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT	8
158 
159 /* Cicada Auxiliary Control/Status Register */
160 #define MIIM_CIS8201_AUX_CONSTAT	0x1c
161 #define MIIM_CIS8201_AUXCONSTAT_INIT	0x0004
162 #define MIIM_CIS8201_AUXCONSTAT_DUPLEX	0x0020
163 #define MIIM_CIS8201_AUXCONSTAT_SPEED	0x0018
164 #define MIIM_CIS8201_AUXCONSTAT_GBIT	0x0010
165 #define MIIM_CIS8201_AUXCONSTAT_100	0x0008
166 
167 /* Cicada Extended Control Register 1 */
168 #define MIIM_CIS8201_EXT_CON1		0x17
169 #define MIIM_CIS8201_EXTCON1_INIT	0x0000
170 
171 /* Cicada 8204 Extended PHY Control Register 1 */
172 #define MIIM_CIS8204_EPHY_CON		0x17
173 #define MIIM_CIS8204_EPHYCON_INIT	0x0006
174 #define MIIM_CIS8204_EPHYCON_RGMII	0x1100
175 
176 /* Cicada 8204 Serial LED Control Register */
177 #define MIIM_CIS8204_SLED_CON		0x1b
178 #define MIIM_CIS8204_SLEDCON_INIT	0x1115
179 
180 #define MIIM_GBIT_CON		0x09
181 #define MIIM_GBIT_CON_ADVERT	0x0e00
182 
183 /* Entry for Vitesse VSC8244 regs starts here */
184 /* Vitesse VSC8244 Auxiliary Control/Status Register */
185 #define MIIM_VSC8244_AUX_CONSTAT	0x1c
186 #define MIIM_VSC8244_AUXCONSTAT_INIT	0x0000
187 #define MIIM_VSC8244_AUXCONSTAT_DUPLEX	0x0020
188 #define MIIM_VSC8244_AUXCONSTAT_SPEED	0x0018
189 #define MIIM_VSC8244_AUXCONSTAT_GBIT	0x0010
190 #define MIIM_VSC8244_AUXCONSTAT_100	0x0008
191 #define MIIM_CONTROL_INIT_LOOPBACK	0x4000
192 
193 /* Vitesse VSC8244 Extended PHY Control Register 1 */
194 #define MIIM_VSC8244_EPHY_CON		0x17
195 #define MIIM_VSC8244_EPHYCON_INIT	0x0006
196 
197 /* Vitesse VSC8244 Serial LED Control Register */
198 #define MIIM_VSC8244_LED_CON		0x1b
199 #define MIIM_VSC8244_LEDCON_INIT	0xF011
200 
201 /* Entry for Vitesse VSC8601 regs starts here (Not complete) */
202 /* Vitesse VSC8601 Extended PHY Control Register 1 */
203 #define MIIM_VSC8601_EPHY_CON		0x17
204 #define MIIM_VSC8601_EPHY_CON_INIT_SKEW	0x1120
205 #define MIIM_VSC8601_SKEW_CTRL		0x1c
206 
207 /* 88E1011 PHY Status Register */
208 #define MIIM_88E1011_PHY_STATUS		0x11
209 #define MIIM_88E1011_PHYSTAT_SPEED	0xc000
210 #define MIIM_88E1011_PHYSTAT_GBIT	0x8000
211 #define MIIM_88E1011_PHYSTAT_100	0x4000
212 #define MIIM_88E1011_PHYSTAT_DUPLEX	0x2000
213 #define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
214 #define MIIM_88E1011_PHYSTAT_LINK	0x0400
215 
216 #define MIIM_88E1011_PHY_SCR		0x10
217 #define MIIM_88E1011_PHY_MDI_X_AUTO	0x0060
218 
219 /* 88E1111 PHY LED Control Register */
220 #define MIIM_88E1111_PHY_LED_CONTROL	24
221 #define MIIM_88E1111_PHY_LED_DIRECT	0x4100
222 #define MIIM_88E1111_PHY_LED_COMBINE	0x411C
223 
224 /* 88E1121 PHY LED Control Register */
225 #define MIIM_88E1121_PHY_LED_CTRL	16
226 #define MIIM_88E1121_PHY_LED_PAGE	3
227 #define MIIM_88E1121_PHY_LED_DEF	0x0030
228 
229 #define MIIM_88E1121_PHY_PAGE		22
230 
231 /* 88E1145 Extended PHY Specific Control Register */
232 #define MIIM_88E1145_PHY_EXT_CR 20
233 #define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
234 #define MIIM_M88E1145_RGMII_TX_DELAY	0x0002
235 
236 #define MIIM_88E1145_PHY_PAGE	29
237 #define MIIM_88E1145_PHY_CAL_OV 30
238 
239 /* RTL8211B PHY Status Register */
240 #define MIIM_RTL8211B_PHY_STATUS	0x11
241 #define MIIM_RTL8211B_PHYSTAT_SPEED	0xc000
242 #define MIIM_RTL8211B_PHYSTAT_GBIT	0x8000
243 #define MIIM_RTL8211B_PHYSTAT_100	0x4000
244 #define MIIM_RTL8211B_PHYSTAT_DUPLEX	0x2000
245 #define MIIM_RTL8211B_PHYSTAT_SPDDONE	0x0800
246 #define MIIM_RTL8211B_PHYSTAT_LINK	0x0400
247 
248 /* DM9161 Control register values */
249 #define MIIM_DM9161_CR_STOP	0x0400
250 #define MIIM_DM9161_CR_RSTAN	0x1200
251 
252 #define MIIM_DM9161_SCR		0x10
253 #define MIIM_DM9161_SCR_INIT	0x0610
254 
255 /* DM9161 Specified Configuration and Status Register */
256 #define MIIM_DM9161_SCSR	0x11
257 #define MIIM_DM9161_SCSR_100F	0x8000
258 #define MIIM_DM9161_SCSR_100H	0x4000
259 #define MIIM_DM9161_SCSR_10F	0x2000
260 #define MIIM_DM9161_SCSR_10H	0x1000
261 
262 /* DM9161 10BT Configuration/Status */
263 #define MIIM_DM9161_10BTCSR	0x12
264 #define MIIM_DM9161_10BTCSR_INIT	0x7800
265 
266 /* LXT971 Status 2 registers */
267 #define MIIM_LXT971_SR2		     0x11  /* Status Register 2  */
268 #define MIIM_LXT971_SR2_SPEED_MASK 0x4200
269 #define MIIM_LXT971_SR2_10HDX	   0x0000  /*  10 Mbit half duplex selected */
270 #define MIIM_LXT971_SR2_10FDX	   0x0200  /*  10 Mbit full duplex selected */
271 #define MIIM_LXT971_SR2_100HDX	   0x4000  /* 100 Mbit half duplex selected */
272 #define MIIM_LXT971_SR2_100FDX	   0x4200  /* 100 Mbit full duplex selected */
273 
274 /* DP83865 Control register values */
275 #define MIIM_DP83865_CR_INIT	0x9200
276 
277 /* DP83865 Link and Auto-Neg Status Register */
278 #define MIIM_DP83865_LANR	0x11
279 #define MIIM_DP83865_SPD_MASK	0x0018
280 #define MIIM_DP83865_SPD_1000	0x0010
281 #define MIIM_DP83865_SPD_100	0x0008
282 #define MIIM_DP83865_DPX_FULL	0x0002
283 
284 #define MIIM_READ_COMMAND	0x00000001
285 
286 #define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN
287 
288 #define MINFLR_INIT_SETTINGS	0x00000040
289 
290 #define DMACTRL_INIT_SETTINGS	0x000000c3
291 #define DMACTRL_GRS		0x00000010
292 #define DMACTRL_GTS		0x00000008
293 
294 #define TSTAT_CLEAR_THALT	0x80000000
295 #define RSTAT_CLEAR_RHALT	0x00800000
296 
297 
298 #define IEVENT_INIT_CLEAR	0xffffffff
299 #define IEVENT_BABR		0x80000000
300 #define IEVENT_RXC		0x40000000
301 #define IEVENT_BSY		0x20000000
302 #define IEVENT_EBERR		0x10000000
303 #define IEVENT_MSRO		0x04000000
304 #define IEVENT_GTSC		0x02000000
305 #define IEVENT_BABT		0x01000000
306 #define IEVENT_TXC		0x00800000
307 #define IEVENT_TXE		0x00400000
308 #define IEVENT_TXB		0x00200000
309 #define IEVENT_TXF		0x00100000
310 #define IEVENT_IE		0x00080000
311 #define IEVENT_LC		0x00040000
312 #define IEVENT_CRL		0x00020000
313 #define IEVENT_XFUN		0x00010000
314 #define IEVENT_RXB0		0x00008000
315 #define IEVENT_GRSC		0x00000100
316 #define IEVENT_RXF0		0x00000080
317 
318 #define IMASK_INIT_CLEAR	0x00000000
319 #define IMASK_TXEEN		0x00400000
320 #define IMASK_TXBEN		0x00200000
321 #define IMASK_TXFEN		0x00100000
322 #define IMASK_RXFEN0		0x00000080
323 
324 
325 /* Default Attribute fields */
326 #define ATTR_INIT_SETTINGS     0x000000c0
327 #define ATTRELI_INIT_SETTINGS  0x00000000
328 
329 
330 /* TxBD status field bits */
331 #define TXBD_READY		0x8000
332 #define TXBD_PADCRC		0x4000
333 #define TXBD_WRAP		0x2000
334 #define TXBD_INTERRUPT		0x1000
335 #define TXBD_LAST		0x0800
336 #define TXBD_CRC		0x0400
337 #define TXBD_DEF		0x0200
338 #define TXBD_HUGEFRAME		0x0080
339 #define TXBD_LATECOLLISION	0x0080
340 #define TXBD_RETRYLIMIT		0x0040
341 #define	TXBD_RETRYCOUNTMASK	0x003c
342 #define TXBD_UNDERRUN		0x0002
343 #define TXBD_STATS		0x03ff
344 
345 /* RxBD status field bits */
346 #define RXBD_EMPTY		0x8000
347 #define RXBD_RO1		0x4000
348 #define RXBD_WRAP		0x2000
349 #define RXBD_INTERRUPT		0x1000
350 #define RXBD_LAST		0x0800
351 #define RXBD_FIRST		0x0400
352 #define RXBD_MISS		0x0100
353 #define RXBD_BROADCAST		0x0080
354 #define RXBD_MULTICAST		0x0040
355 #define RXBD_LARGE		0x0020
356 #define RXBD_NONOCTET		0x0010
357 #define RXBD_SHORT		0x0008
358 #define RXBD_CRCERR		0x0004
359 #define RXBD_OVERRUN		0x0002
360 #define RXBD_TRUNCATED		0x0001
361 #define RXBD_STATS		0x003f
362 
363 typedef struct txbd8
364 {
365 	ushort	     status;	     /* Status Fields */
366 	ushort	     length;	     /* Buffer length */
367 	uint	     bufPtr;	     /* Buffer Pointer */
368 } txbd8_t;
369 
370 typedef struct rxbd8
371 {
372 	ushort	     status;	     /* Status Fields */
373 	ushort	     length;	     /* Buffer Length */
374 	uint	     bufPtr;	     /* Buffer Pointer */
375 } rxbd8_t;
376 
377 typedef struct rmon_mib
378 {
379 	/* Transmit and Receive Counters */
380 	uint	tr64;		/* Transmit and Receive 64-byte Frame Counter */
381 	uint	tr127;		/* Transmit and Receive 65-127 byte Frame Counter */
382 	uint	tr255;		/* Transmit and Receive 128-255 byte Frame Counter */
383 	uint	tr511;		/* Transmit and Receive 256-511 byte Frame Counter */
384 	uint	tr1k;		/* Transmit and Receive 512-1023 byte Frame Counter */
385 	uint	trmax;		/* Transmit and Receive 1024-1518 byte Frame Counter */
386 	uint	trmgv;		/* Transmit and Receive 1519-1522 byte Good VLAN Frame */
387 	/* Receive Counters */
388 	uint	rbyt;		/* Receive Byte Counter */
389 	uint	rpkt;		/* Receive Packet Counter */
390 	uint	rfcs;		/* Receive FCS Error Counter */
391 	uint	rmca;		/* Receive Multicast Packet (Counter) */
392 	uint	rbca;		/* Receive Broadcast Packet */
393 	uint	rxcf;		/* Receive Control Frame Packet */
394 	uint	rxpf;		/* Receive Pause Frame Packet */
395 	uint	rxuo;		/* Receive Unknown OP Code */
396 	uint	raln;		/* Receive Alignment Error */
397 	uint	rflr;		/* Receive Frame Length Error */
398 	uint	rcde;		/* Receive Code Error */
399 	uint	rcse;		/* Receive Carrier Sense Error */
400 	uint	rund;		/* Receive Undersize Packet */
401 	uint	rovr;		/* Receive Oversize Packet */
402 	uint	rfrg;		/* Receive Fragments */
403 	uint	rjbr;		/* Receive Jabber */
404 	uint	rdrp;		/* Receive Drop */
405 	/* Transmit Counters */
406 	uint	tbyt;		/* Transmit Byte Counter */
407 	uint	tpkt;		/* Transmit Packet */
408 	uint	tmca;		/* Transmit Multicast Packet */
409 	uint	tbca;		/* Transmit Broadcast Packet */
410 	uint	txpf;		/* Transmit Pause Control Frame */
411 	uint	tdfr;		/* Transmit Deferral Packet */
412 	uint	tedf;		/* Transmit Excessive Deferral Packet */
413 	uint	tscl;		/* Transmit Single Collision Packet */
414 	/* (0x2_n700) */
415 	uint	tmcl;		/* Transmit Multiple Collision Packet */
416 	uint	tlcl;		/* Transmit Late Collision Packet */
417 	uint	txcl;		/* Transmit Excessive Collision Packet */
418 	uint	tncl;		/* Transmit Total Collision */
419 
420 	uint	res2;
421 
422 	uint	tdrp;		/* Transmit Drop Frame */
423 	uint	tjbr;		/* Transmit Jabber Frame */
424 	uint	tfcs;		/* Transmit FCS Error */
425 	uint	txcf;		/* Transmit Control Frame */
426 	uint	tovr;		/* Transmit Oversize Frame */
427 	uint	tund;		/* Transmit Undersize Frame */
428 	uint	tfrg;		/* Transmit Fragments Frame */
429 	/* General Registers */
430 	uint	car1;		/* Carry Register One */
431 	uint	car2;		/* Carry Register Two */
432 	uint	cam1;		/* Carry Register One Mask */
433 	uint	cam2;		/* Carry Register Two Mask */
434 } rmon_mib_t;
435 
436 typedef struct tsec_hash_regs
437 {
438 	uint	iaddr0;		/* Individual Address Register 0 */
439 	uint	iaddr1;		/* Individual Address Register 1 */
440 	uint	iaddr2;		/* Individual Address Register 2 */
441 	uint	iaddr3;		/* Individual Address Register 3 */
442 	uint	iaddr4;		/* Individual Address Register 4 */
443 	uint	iaddr5;		/* Individual Address Register 5 */
444 	uint	iaddr6;		/* Individual Address Register 6 */
445 	uint	iaddr7;		/* Individual Address Register 7 */
446 	uint	res1[24];
447 	uint	gaddr0;		/* Group Address Register 0 */
448 	uint	gaddr1;		/* Group Address Register 1 */
449 	uint	gaddr2;		/* Group Address Register 2 */
450 	uint	gaddr3;		/* Group Address Register 3 */
451 	uint	gaddr4;		/* Group Address Register 4 */
452 	uint	gaddr5;		/* Group Address Register 5 */
453 	uint	gaddr6;		/* Group Address Register 6 */
454 	uint	gaddr7;		/* Group Address Register 7 */
455 	uint	res2[24];
456 } tsec_hash_t;
457 
458 typedef struct tsec
459 {
460 	/* General Control and Status Registers (0x2_n000) */
461 	uint	res000[4];
462 
463 	uint	ievent;		/* Interrupt Event */
464 	uint	imask;		/* Interrupt Mask */
465 	uint	edis;		/* Error Disabled */
466 	uint	res01c;
467 	uint	ecntrl;		/* Ethernet Control */
468 	uint	minflr;		/* Minimum Frame Length */
469 	uint	ptv;		/* Pause Time Value */
470 	uint	dmactrl;	/* DMA Control */
471 	uint	tbipa;		/* TBI PHY Address */
472 
473 	uint	res034[3];
474 	uint	res040[48];
475 
476 	/* Transmit Control and Status Registers (0x2_n100) */
477 	uint	tctrl;		/* Transmit Control */
478 	uint	tstat;		/* Transmit Status */
479 	uint	res108;
480 	uint	tbdlen;		/* Tx BD Data Length */
481 	uint	res110[5];
482 	uint	ctbptr;		/* Current TxBD Pointer */
483 	uint	res128[23];
484 	uint	tbptr;		/* TxBD Pointer */
485 	uint	res188[30];
486 	/* (0x2_n200) */
487 	uint	res200;
488 	uint	tbase;		/* TxBD Base Address */
489 	uint	res208[42];
490 	uint	ostbd;		/* Out of Sequence TxBD */
491 	uint	ostbdp;		/* Out of Sequence Tx Data Buffer Pointer */
492 	uint	res2b8[18];
493 
494 	/* Receive Control and Status Registers (0x2_n300) */
495 	uint	rctrl;		/* Receive Control */
496 	uint	rstat;		/* Receive Status */
497 	uint	res308;
498 	uint	rbdlen;		/* RxBD Data Length */
499 	uint	res310[4];
500 	uint	res320;
501 	uint	crbptr;	/* Current Receive Buffer Pointer */
502 	uint	res328[6];
503 	uint	mrblr;	/* Maximum Receive Buffer Length */
504 	uint	res344[16];
505 	uint	rbptr;	/* RxBD Pointer */
506 	uint	res388[30];
507 	/* (0x2_n400) */
508 	uint	res400;
509 	uint	rbase;	/* RxBD Base Address */
510 	uint	res408[62];
511 
512 	/* MAC Registers (0x2_n500) */
513 	uint	maccfg1;	/* MAC Configuration #1 */
514 	uint	maccfg2;	/* MAC Configuration #2 */
515 	uint	ipgifg;		/* Inter Packet Gap/Inter Frame Gap */
516 	uint	hafdup;		/* Half-duplex */
517 	uint	maxfrm;		/* Maximum Frame */
518 	uint	res514;
519 	uint	res518;
520 
521 	uint	res51c;
522 
523 	uint	miimcfg;	/* MII Management: Configuration */
524 	uint	miimcom;	/* MII Management: Command */
525 	uint	miimadd;	/* MII Management: Address */
526 	uint	miimcon;	/* MII Management: Control */
527 	uint	miimstat;	/* MII Management: Status */
528 	uint	miimind;	/* MII Management: Indicators */
529 
530 	uint	res538;
531 
532 	uint	ifstat;		/* Interface Status */
533 	uint	macstnaddr1;	/* Station Address, part 1 */
534 	uint	macstnaddr2;	/* Station Address, part 2 */
535 	uint	res548[46];
536 
537 	/* (0x2_n600) */
538 	uint	res600[32];
539 
540 	/* RMON MIB Registers (0x2_n680-0x2_n73c) */
541 	rmon_mib_t	rmon;
542 	uint	res740[48];
543 
544 	/* Hash Function Registers (0x2_n800) */
545 	tsec_hash_t	hash;
546 
547 	uint	res900[128];
548 
549 	/* Pattern Registers (0x2_nb00) */
550 	uint	resb00[62];
551 	uint	attr;	   /* Default Attribute Register */
552 	uint	attreli;	   /* Default Attribute Extract Length and Index */
553 
554 	/* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
555 	uint	resc00[256];
556 } tsec_t;
557 
558 #define TSEC_GIGABIT (1)
559 
560 /* This flag currently only has
561  * meaning if we're using the eTSEC */
562 #define TSEC_REDUCED	(1 << 1)
563 
564 #define TSEC_SGMII	(1 << 2)
565 
566 struct tsec_private {
567 	volatile tsec_t *regs;
568 	volatile tsec_t *phyregs;
569 	struct phy_info *phyinfo;
570 	uint phyaddr;
571 	u32 flags;
572 	uint link;
573 	uint duplexity;
574 	uint speed;
575 };
576 
577 
578 /*
579  * struct phy_cmd:  A command for reading or writing a PHY register
580  *
581  * mii_reg:  The register to read or write
582  *
583  * mii_data:  For writes, the value to put in the register.
584  *	A value of -1 indicates this is a read.
585  *
586  * funct: A function pointer which is invoked for each command.
587  *	For reads, this function will be passed the value read
588  *	from the PHY, and process it.
589  *	For writes, the result of this function will be written
590  *	to the PHY register
591  */
592 struct phy_cmd {
593 	uint mii_reg;
594 	uint mii_data;
595 	uint (*funct) (uint mii_reg, struct tsec_private * priv);
596 };
597 
598 /* struct phy_info: a structure which defines attributes for a PHY
599  *
600  * id will contain a number which represents the PHY.  During
601  * startup, the driver will poll the PHY to find out what its
602  * UID--as defined by registers 2 and 3--is.  The 32-bit result
603  * gotten from the PHY will be shifted right by "shift" bits to
604  * discard any bits which may change based on revision numbers
605  * unimportant to functionality
606  *
607  * The struct phy_cmd entries represent pointers to an arrays of
608  * commands which tell the driver what to do to the PHY.
609  */
610 struct phy_info {
611 	uint id;
612 	char *name;
613 	uint shift;
614 	/* Called to configure the PHY, and modify the controller
615 	 * based on the results */
616 	struct phy_cmd *config;
617 
618 	/* Called when starting up the controller */
619 	struct phy_cmd *startup;
620 
621 	/* Called when bringing down the controller */
622 	struct phy_cmd *shutdown;
623 };
624 
625 struct tsec_info_struct {
626 	tsec_t *regs;
627 	tsec_t *miiregs;
628 	char *devname;
629 	unsigned int phyaddr;
630 	u32 flags;
631 };
632 
633 int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
634 int tsec_standard_init(bd_t *bis);
635 int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsec_info, int num);
636 
637 #endif /* __TSEC_H */
638