1 /* 2 * (C) Copyright 2012 3 * Texas Instruments, <www.ti.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 #ifndef _SPL_H_ 8 #define _SPL_H_ 9 10 /* Platform-specific defines */ 11 #include <linux/compiler.h> 12 #include <asm/spl.h> 13 14 /* Value in r0 indicates we booted from U-Boot */ 15 #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642 16 17 /* Boot type */ 18 #define MMCSD_MODE_UNDEFINED 0 19 #define MMCSD_MODE_RAW 1 20 #define MMCSD_MODE_FS 2 21 #define MMCSD_MODE_EMMCBOOT 3 22 23 struct spl_image_info { 24 const char *name; 25 u8 os; 26 u32 load_addr; 27 u32 entry_point; 28 u32 size; 29 u32 flags; 30 }; 31 32 /* 33 * Information required to load data from a device 34 * 35 * @dev: Pointer to the device, e.g. struct mmc * 36 * @priv: Private data for the device 37 * @bl_len: Block length for reading in bytes 38 * @filename: Name of the fit image file. 39 * @read: Function to call to read from the device 40 */ 41 struct spl_load_info { 42 void *dev; 43 void *priv; 44 int bl_len; 45 const char *filename; 46 ulong (*read)(struct spl_load_info *load, ulong sector, ulong count, 47 void *buf); 48 }; 49 50 /** 51 * spl_load_simple_fit() - Loads a fit image from a device. 52 * @spl_image: Image description to set up 53 * @info: Structure containing the information required to load data. 54 * @sector: Sector number where FIT image is located in the device 55 * @fdt: Pointer to the copied FIT header. 56 * 57 * Reads the FIT image @sector in the device. Loads u-boot image to 58 * specified load address and copies the dtb to end of u-boot image. 59 * Returns 0 on success. 60 */ 61 int spl_load_simple_fit(struct spl_image_info *spl_image, 62 struct spl_load_info *info, ulong sector, void *fdt); 63 64 #define SPL_COPY_PAYLOAD_ONLY 1 65 66 /* SPL common functions */ 67 void preloader_console_init(void); 68 u32 spl_boot_device(void); 69 u32 spl_boot_mode(const u32 boot_device); 70 71 /** 72 * spl_set_header_raw_uboot() - Set up a standard SPL image structure 73 * 74 * This sets up the given spl_image which the standard values obtained from 75 * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, 76 * CONFIG_SYS_TEXT_BASE. 77 * 78 * @spl_image: Image description to set up 79 */ 80 void spl_set_header_raw_uboot(struct spl_image_info *spl_image); 81 82 /** 83 * spl_parse_image_header() - parse the image header and set up info 84 * 85 * This parses the legacy image header information at @header and sets up 86 * @spl_image according to what is found. If no image header is found, then 87 * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is 88 * enabled, then this causes a panic. If CONFIG_SPL_ABORT_ON_RAW_IMAGE is 89 * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using 90 * spl_set_header_raw_uboot(), or possibly the bootz header. 91 * 92 * @spl_image: Image description to set up 93 * @header image header to parse 94 * @return 0 if a header was correctly parsed, -ve on error 95 */ 96 int spl_parse_image_header(struct spl_image_info *spl_image, 97 const struct image_header *header); 98 99 void spl_board_prepare_for_linux(void); 100 void spl_board_prepare_for_boot(void); 101 int spl_board_ubi_load_image(u32 boot_device); 102 103 /** 104 * jump_to_image_linux() - Jump to a Linux kernel from SPL 105 * 106 * This jumps into a Linux kernel using the information in @spl_image. 107 * 108 * @spl_image: Image description to set up 109 * @arg: Argument to pass to Linux (typically a device tree pointer) 110 */ 111 void __noreturn jump_to_image_linux(struct spl_image_info *spl_image, 112 void *arg); 113 114 /** 115 * spl_start_uboot() - Check if SPL should start the kernel or U-Boot 116 * 117 * This is called by the various SPL loaders to determine whether the board 118 * wants to load the kernel or U-Boot. This function should be provided by 119 * the board. 120 * 121 * @return 0 if SPL should start the kernel, 1 if U-Boot must be started 122 */ 123 int spl_start_uboot(void); 124 125 /** 126 * spl_display_print() - Display a board-specific message in SPL 127 * 128 * If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function 129 * immediately after displaying the SPL console banner ("U-Boot SPL ..."). 130 * This function should be provided by the board. 131 */ 132 void spl_display_print(void); 133 134 /** 135 * struct spl_boot_device - Describes a boot device used by SPL 136 * 137 * @boot_device: A number indicating the BOOT_DEVICE type. There are various 138 * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently 139 * numbered. 140 * @boot_device_name: Named boot device, or NULL if none. 141 * 142 * Note: Additional fields can be added here, bearing in mind that SPL is 143 * size-sensitive and common fields will be present on all boards. This 144 * struct can also be used to return additional information about the load 145 * process if that becomes useful. 146 */ 147 struct spl_boot_device { 148 uint boot_device; 149 const char *boot_device_name; 150 }; 151 152 /** 153 * Holds information about a way of loading an SPL image 154 * 155 * @boot_device: Boot device that this loader supports 156 * @load_image: Function to call to load image 157 */ 158 struct spl_image_loader { 159 uint boot_device; 160 /** 161 * load_image() - Load an SPL image 162 * 163 * @spl_image: place to put image information 164 * @bootdev: describes the boot device to load from 165 */ 166 int (*load_image)(struct spl_image_info *spl_image, 167 struct spl_boot_device *bootdev); 168 }; 169 170 /* Declare an SPL image loader */ 171 #define SPL_LOAD_IMAGE(__name) \ 172 ll_entry_declare(struct spl_image_loader, __name, spl_image_loader) 173 174 /* 175 * __priority is the priority of this method, 0 meaning it will be the top 176 * choice for this device, 9 meaning it is the bottom choice. 177 * __boot_device is the BOOT_DEVICE_... value 178 * __method is the load_image function to call 179 */ 180 #define SPL_LOAD_IMAGE_METHOD(__priority, __boot_device, __method) \ 181 SPL_LOAD_IMAGE(__method ## __priority ## __boot_device) = { \ 182 .boot_device = __boot_device, \ 183 .load_image = __method, \ 184 } 185 186 /* SPL FAT image functions */ 187 int spl_load_image_fat(struct spl_image_info *spl_image, 188 struct blk_desc *block_dev, int partition, 189 const char *filename); 190 int spl_load_image_fat_os(struct spl_image_info *spl_image, 191 struct blk_desc *block_dev, int partition); 192 193 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image); 194 195 /* SPL EXT image functions */ 196 int spl_load_image_ext(struct spl_image_info *spl_image, 197 struct blk_desc *block_dev, int partition, 198 const char *filename); 199 int spl_load_image_ext_os(struct spl_image_info *spl_image, 200 struct blk_desc *block_dev, int partition); 201 202 /** 203 * spl_init() - Set up device tree and driver model in SPL if enabled 204 * 205 * Call this function in board_init_f() if you want to use device tree and 206 * driver model early, before board_init_r() is called. This function will 207 * be called from board_init_r() if not called earlier. 208 * 209 * If this is not called, then driver model will be inactive in SPL's 210 * board_init_f(), and no device tree will be available. 211 */ 212 int spl_init(void); 213 214 #ifdef CONFIG_SPL_BOARD_INIT 215 void spl_board_init(void); 216 #endif 217 218 /** 219 * spl_was_boot_source() - check if U-Boot booted from SPL 220 * 221 * This will normally be true, but if U-Boot jumps to second U-Boot, it will 222 * be false. This should be implemented by board-specific code. 223 * 224 * @return true if U-Boot booted from SPL, else false 225 */ 226 bool spl_was_boot_source(void); 227 228 /** 229 * spl_dfu_cmd- run dfu command with chosen mmc device interface 230 * @param usb_index - usb controller number 231 * @param mmc_dev - mmc device nubmer 232 * 233 * @return 0 on success, otherwise error code 234 */ 235 int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr); 236 237 int spl_mmc_load_image(struct spl_image_info *spl_image, 238 struct spl_boot_device *bootdev); 239 240 #endif 241