1 /* 2 * (C) Copyright 2012 3 * Texas Instruments, <www.ti.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 #ifndef _SPL_H_ 8 #define _SPL_H_ 9 10 /* Platform-specific defines */ 11 #include <linux/compiler.h> 12 #include <asm/spl.h> 13 14 /* Value in r0 indicates we booted from U-Boot */ 15 #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642 16 17 /* Boot type */ 18 #define MMCSD_MODE_UNDEFINED 0 19 #define MMCSD_MODE_RAW 1 20 #define MMCSD_MODE_FS 2 21 #define MMCSD_MODE_EMMCBOOT 3 22 23 struct spl_image_info { 24 const char *name; 25 u8 os; 26 ulong load_addr; 27 ulong entry_point; 28 u32 size; 29 u32 flags; 30 void *arg; 31 }; 32 33 /* 34 * Information required to load data from a device 35 * 36 * @dev: Pointer to the device, e.g. struct mmc * 37 * @priv: Private data for the device 38 * @bl_len: Block length for reading in bytes 39 * @filename: Name of the fit image file. 40 * @read: Function to call to read from the device 41 */ 42 struct spl_load_info { 43 void *dev; 44 void *priv; 45 int bl_len; 46 const char *filename; 47 ulong (*read)(struct spl_load_info *load, ulong sector, ulong count, 48 void *buf); 49 }; 50 51 /** 52 * spl_load_simple_fit() - Loads a fit image from a device. 53 * @spl_image: Image description to set up 54 * @info: Structure containing the information required to load data. 55 * @sector: Sector number where FIT image is located in the device 56 * @fdt: Pointer to the copied FIT header. 57 * 58 * Reads the FIT image @sector in the device. Loads u-boot image to 59 * specified load address and copies the dtb to end of u-boot image. 60 * Returns 0 on success. 61 */ 62 int spl_load_simple_fit(struct spl_image_info *spl_image, 63 struct spl_load_info *info, ulong sector, void *fdt); 64 65 #define SPL_COPY_PAYLOAD_ONLY 1 66 67 /* SPL common functions */ 68 void preloader_console_init(void); 69 u32 spl_boot_device(void); 70 u32 spl_boot_mode(const u32 boot_device); 71 void spl_set_bd(void); 72 73 /** 74 * spl_set_header_raw_uboot() - Set up a standard SPL image structure 75 * 76 * This sets up the given spl_image which the standard values obtained from 77 * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, 78 * CONFIG_SYS_TEXT_BASE. 79 * 80 * @spl_image: Image description to set up 81 */ 82 void spl_set_header_raw_uboot(struct spl_image_info *spl_image); 83 84 /** 85 * spl_parse_image_header() - parse the image header and set up info 86 * 87 * This parses the legacy image header information at @header and sets up 88 * @spl_image according to what is found. If no image header is found, then 89 * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is 90 * enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not 91 * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using 92 * spl_set_header_raw_uboot(), or possibly the bootz header. 93 * 94 * @spl_image: Image description to set up 95 * @header image header to parse 96 * @return 0 if a header was correctly parsed, -ve on error 97 */ 98 int spl_parse_image_header(struct spl_image_info *spl_image, 99 const struct image_header *header); 100 101 void spl_board_prepare_for_linux(void); 102 void spl_board_prepare_for_boot(void); 103 int spl_board_ubi_load_image(u32 boot_device); 104 105 /** 106 * jump_to_image_linux() - Jump to a Linux kernel from SPL 107 * 108 * This jumps into a Linux kernel using the information in @spl_image. 109 * 110 * @spl_image: Image description to set up 111 */ 112 void __noreturn jump_to_image_linux(struct spl_image_info *spl_image); 113 114 /** 115 * spl_start_uboot() - Check if SPL should start the kernel or U-Boot 116 * 117 * This is called by the various SPL loaders to determine whether the board 118 * wants to load the kernel or U-Boot. This function should be provided by 119 * the board. 120 * 121 * @return 0 if SPL should start the kernel, 1 if U-Boot must be started 122 */ 123 int spl_start_uboot(void); 124 125 /** 126 * spl_display_print() - Display a board-specific message in SPL 127 * 128 * If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function 129 * immediately after displaying the SPL console banner ("U-Boot SPL ..."). 130 * This function should be provided by the board. 131 */ 132 void spl_display_print(void); 133 134 /** 135 * struct spl_boot_device - Describes a boot device used by SPL 136 * 137 * @boot_device: A number indicating the BOOT_DEVICE type. There are various 138 * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently 139 * numbered. 140 * @boot_device_name: Named boot device, or NULL if none. 141 * 142 * Note: Additional fields can be added here, bearing in mind that SPL is 143 * size-sensitive and common fields will be present on all boards. This 144 * struct can also be used to return additional information about the load 145 * process if that becomes useful. 146 */ 147 struct spl_boot_device { 148 uint boot_device; 149 const char *boot_device_name; 150 }; 151 152 /** 153 * Holds information about a way of loading an SPL image 154 * 155 * @name: User-friendly name for this method (e.g. "MMC") 156 * @boot_device: Boot device that this loader supports 157 * @load_image: Function to call to load image 158 */ 159 struct spl_image_loader { 160 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 161 const char *name; 162 #endif 163 uint boot_device; 164 /** 165 * load_image() - Load an SPL image 166 * 167 * @spl_image: place to put image information 168 * @bootdev: describes the boot device to load from 169 */ 170 int (*load_image)(struct spl_image_info *spl_image, 171 struct spl_boot_device *bootdev); 172 }; 173 174 /* Declare an SPL image loader */ 175 #define SPL_LOAD_IMAGE(__name) \ 176 ll_entry_declare(struct spl_image_loader, __name, spl_image_loader) 177 178 /* 179 * _priority is the priority of this method, 0 meaning it will be the top 180 * choice for this device, 9 meaning it is the bottom choice. 181 * _boot_device is the BOOT_DEVICE_... value 182 * _method is the load_image function to call 183 */ 184 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 185 #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \ 186 SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \ 187 .name = _name, \ 188 .boot_device = _boot_device, \ 189 .load_image = _method, \ 190 } 191 #else 192 #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \ 193 SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \ 194 .boot_device = _boot_device, \ 195 .load_image = _method, \ 196 } 197 #endif 198 199 /* SPL FAT image functions */ 200 int spl_load_image_fat(struct spl_image_info *spl_image, 201 struct blk_desc *block_dev, int partition, 202 const char *filename); 203 int spl_load_image_fat_os(struct spl_image_info *spl_image, 204 struct blk_desc *block_dev, int partition); 205 206 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image); 207 208 /* SPL EXT image functions */ 209 int spl_load_image_ext(struct spl_image_info *spl_image, 210 struct blk_desc *block_dev, int partition, 211 const char *filename); 212 int spl_load_image_ext_os(struct spl_image_info *spl_image, 213 struct blk_desc *block_dev, int partition); 214 215 /** 216 * spl_early_init() - Set up device tree and driver model in SPL if enabled 217 * 218 * Call this function in board_init_f() if you want to use device tree and 219 * driver model early, before board_init_r() is called. 220 * 221 * If this is not called, then driver model will be inactive in SPL's 222 * board_init_f(), and no device tree will be available. 223 */ 224 int spl_early_init(void); 225 226 /** 227 * spl_init() - Set up device tree and driver model in SPL if enabled 228 * 229 * You can optionally call spl_early_init(), then optionally call spl_init(). 230 * This function will be called from board_init_r() if not called earlier. 231 * 232 * Both spl_early_init() and spl_init() perform a similar function except that 233 * the latter will not set up the malloc() area if 234 * CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is enabled, since it is assumed to 235 * already be done by a calll to spl_relocate_stack_gd() before board_init_r() 236 * is reached. 237 * 238 * This function will be called from board_init_r() if not called earlier. 239 * 240 * If this is not called, then driver model will be inactive in SPL's 241 * board_init_f(), and no device tree will be available. 242 */ 243 int spl_init(void); 244 245 #ifdef CONFIG_SPL_BOARD_INIT 246 void spl_board_init(void); 247 #endif 248 249 /** 250 * spl_was_boot_source() - check if U-Boot booted from SPL 251 * 252 * This will normally be true, but if U-Boot jumps to second U-Boot, it will 253 * be false. This should be implemented by board-specific code. 254 * 255 * @return true if U-Boot booted from SPL, else false 256 */ 257 bool spl_was_boot_source(void); 258 259 /** 260 * spl_dfu_cmd- run dfu command with chosen mmc device interface 261 * @param usb_index - usb controller number 262 * @param mmc_dev - mmc device nubmer 263 * 264 * @return 0 on success, otherwise error code 265 */ 266 int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr); 267 268 int spl_mmc_load_image(struct spl_image_info *spl_image, 269 struct spl_boot_device *bootdev); 270 271 void bl31_entry(void); 272 273 /** 274 * board_return_to_bootrom - allow for boards to continue with the boot ROM 275 * 276 * If a board (e.g. the Rockchip RK3368 boards) provide some 277 * supporting functionality for SPL in their boot ROM and the SPL 278 * stage wants to return to the ROM code to continue booting, boards 279 * can implement 'board_return_to_bootrom'. 280 */ 281 void board_return_to_bootrom(void); 282 #endif 283