1 /* 2 * Common SPI flash Interface 3 * 4 * Copyright (C) 2008 Atmel Corporation 5 * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * version 2 as published by the Free Software Foundation. 13 */ 14 15 #ifndef _SPI_FLASH_H_ 16 #define _SPI_FLASH_H_ 17 18 #include <spi.h> 19 #include <linux/types.h> 20 #include <linux/compiler.h> 21 22 /* sf param flags */ 23 #define SECT_4K 1 << 1 24 #define SECT_32K 1 << 2 25 #define E_FSR 1 << 3 26 #define WR_QPP 1 << 4 27 28 /* Enum list - Full read commands */ 29 enum spi_read_cmds { 30 ARRAY_SLOW = 1 << 0, 31 DUAL_OUTPUT_FAST = 1 << 1, 32 DUAL_IO_FAST = 1 << 2, 33 QUAD_OUTPUT_FAST = 1 << 3, 34 QUAD_IO_FAST = 1 << 4, 35 }; 36 #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST 37 #define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST 38 39 /* Dual SPI flash memories */ 40 enum spi_dual_flash { 41 SF_SINGLE_FLASH = 0, 42 SF_DUAL_STACKED_FLASH = 1 << 0, 43 SF_DUAL_PARALLEL_FLASH = 1 << 1, 44 }; 45 46 /** 47 * struct spi_flash_params - SPI/QSPI flash device params structure 48 * 49 * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) 50 * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) 51 * @ext_jedec: Device ext_jedec ID 52 * @sector_size: Sector size of this device 53 * @nr_sectors: No.of sectors on this device 54 * @e_rd_cmd: Enum list for read commands 55 * @flags: Importent param, for flash specific behaviour 56 */ 57 struct spi_flash_params { 58 const char *name; 59 u32 jedec; 60 u16 ext_jedec; 61 u32 sector_size; 62 u32 nr_sectors; 63 u8 e_rd_cmd; 64 u16 flags; 65 }; 66 67 extern const struct spi_flash_params spi_flash_params_table[]; 68 69 /** 70 * struct spi_flash - SPI flash structure 71 * 72 * @spi: SPI slave 73 * @name: Name of SPI flash 74 * @dual_flash: Indicates dual flash memories - dual stacked, parallel 75 * @shift: Flash shift useful in dual parallel 76 * @size: Total flash size 77 * @page_size: Write (page) size 78 * @sector_size: Sector size 79 * @erase_size: Erase size 80 * @bank_read_cmd: Bank read cmd 81 * @bank_write_cmd: Bank write cmd 82 * @bank_curr: Current flash bank 83 * @poll_cmd: Poll cmd - for flash erase/program 84 * @erase_cmd: Erase cmd 4K, 32K, 64K 85 * @read_cmd: Read cmd - Array Fast, Extn read and quad read. 86 * @write_cmd: Write cmd - page and quad program. 87 * @dummy_byte: Dummy cycles for read operation. 88 * @memory_map: Address of read-only SPI flash access 89 * @read: Flash read ops: Read len bytes at offset into buf 90 * Supported cmds: Fast Array Read 91 * @write: Flash write ops: Write len bytes from buf into offeset 92 * Supported cmds: Page Program 93 * @erase: Flash erase ops: Erase len bytes from offset 94 * Supported cmds: Sector erase 4K, 32K, 64K 95 * return 0 - Sucess, 1 - Failure 96 */ 97 struct spi_flash { 98 struct spi_slave *spi; 99 const char *name; 100 u8 dual_flash; 101 u8 shift; 102 103 u32 size; 104 u32 page_size; 105 u32 sector_size; 106 u32 erase_size; 107 #ifdef CONFIG_SPI_FLASH_BAR 108 u8 bank_read_cmd; 109 u8 bank_write_cmd; 110 u8 bank_curr; 111 #endif 112 u8 poll_cmd; 113 u8 erase_cmd; 114 u8 read_cmd; 115 u8 write_cmd; 116 u8 dummy_byte; 117 118 void *memory_map; 119 int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); 120 int (*write)(struct spi_flash *flash, u32 offset, size_t len, 121 const void *buf); 122 int (*erase)(struct spi_flash *flash, u32 offset, size_t len); 123 }; 124 125 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, 126 unsigned int max_hz, unsigned int spi_mode); 127 128 /** 129 * Set up a new SPI flash from an fdt node 130 * 131 * @param blob Device tree blob 132 * @param slave_node Pointer to this SPI slave node in the device tree 133 * @param spi_node Cached pointer to the SPI interface this node belongs 134 * to 135 * @return 0 if ok, -1 on error 136 */ 137 struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, 138 int spi_node); 139 140 void spi_flash_free(struct spi_flash *flash); 141 142 static inline int spi_flash_read(struct spi_flash *flash, u32 offset, 143 size_t len, void *buf) 144 { 145 return flash->read(flash, offset, len, buf); 146 } 147 148 static inline int spi_flash_write(struct spi_flash *flash, u32 offset, 149 size_t len, const void *buf) 150 { 151 return flash->write(flash, offset, len, buf); 152 } 153 154 static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, 155 size_t len) 156 { 157 return flash->erase(flash, offset, len); 158 } 159 160 void spi_boot(void) __noreturn; 161 162 #endif /* _SPI_FLASH_H_ */ 163