1/* 2 * (C) Copyright 2000-2002 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8/* 9 * This file contains all the macros and symbols which define 10 * a PowerPC assembly language environment. 11 */ 12#ifndef __PPC_ASM_TMPL__ 13#define __PPC_ASM_TMPL__ 14 15#include <config.h> 16 17/*************************************************************************** 18 * 19 * These definitions simplify the ugly declarations necessary for GOT 20 * definitions. 21 * 22 * Stolen from prepboot/bootldr.h, (C) 1998 Gabriel Paubert, paubert@iram.es 23 * 24 * Uses r12 to access the GOT 25 */ 26 27#define START_GOT \ 28 .section ".got2","aw"; \ 29.LCTOC1 = .+32768 30 31#define END_GOT \ 32 .text 33 34#define GET_GOT \ 35 bl 1f ; \ 36 .text 2 ; \ 370: .long .LCTOC1-1f ; \ 38 .text ; \ 391: mflr r12 ; \ 40 lwz r0,0b-1b(r12) ; \ 41 add r12,r0,r12 ; 42 43#define GOT_ENTRY(NAME) .L_ ## NAME = . - .LCTOC1 ; .long NAME 44 45#define GOT(NAME) .L_ ## NAME (r12) 46 47 48/*************************************************************************** 49 * Register names 50 */ 51#define r0 0 52#define r1 1 53#define r2 2 54#define r3 3 55#define r4 4 56#define r5 5 57#define r6 6 58#define r7 7 59#define r8 8 60#define r9 9 61#define r10 10 62#define r11 11 63#define r12 12 64#define r13 13 65#define r14 14 66#define r15 15 67#define r16 16 68#define r17 17 69#define r18 18 70#define r19 19 71#define r20 20 72#define r21 21 73#define r22 22 74#define r23 23 75#define r24 24 76#define r25 25 77#define r26 26 78#define r27 27 79#define r28 28 80#define r29 29 81#define r30 30 82#define r31 31 83 84 85#if defined(CONFIG_8xx) 86 87/* Some special registers */ 88 89#define ICR 148 /* Interrupt Cause Register (37-44) */ 90#define DER 149 91#define COUNTA 150 /* Breakpoint Counter (37-44) */ 92#define COUNTB 151 /* Breakpoint Counter (37-44) */ 93#define LCTRL1 156 /* Load/Store Support (37-40) */ 94#define LCTRL2 157 /* Load/Store Support (37-41) */ 95#define ICTRL 158 96 97#endif /* CONFIG_8xx */ 98 99 100#if defined(CONFIG_5xx) 101/* Some special purpose registers */ 102#define DER 149 /* Debug Enable Register */ 103#define COUNTA 150 /* Breakpoint Counter */ 104#define COUNTB 151 /* Breakpoint Counter */ 105#define LCTRL1 156 /* Load/Store Support */ 106#define LCTRL2 157 /* Load/Store Support */ 107#define ICTRL 158 /* I-Bus Support Control Register */ 108#define EID 81 109#endif /* CONFIG_5xx */ 110 111#if defined(CONFIG_8xx) 112 113/* Registers in the processor's internal memory map that we use. 114*/ 115#define SYPCR 0x00000004 116#define BR0 0x00000100 117#define OR0 0x00000104 118#define BR1 0x00000108 119#define OR1 0x0000010c 120#define BR2 0x00000110 121#define OR2 0x00000114 122#define BR3 0x00000118 123#define OR3 0x0000011c 124#define BR4 0x00000120 125#define OR4 0x00000124 126 127#define MAR 0x00000164 128#define MCR 0x00000168 129#define MAMR 0x00000170 130#define MBMR 0x00000174 131#define MSTAT 0x00000178 132#define MPTPR 0x0000017a 133#define MDR 0x0000017c 134 135#define TBSCR 0x00000200 136#define TBREFF0 0x00000204 137 138#define PLPRCR 0x00000284 139 140#elif defined(CONFIG_MPC8260) 141 142#define HID2 1011 143 144#define HID0_IFEM (1<<7) 145 146#define HID0_ICE_BITPOS 16 147#define HID0_DCE_BITPOS 17 148 149#define IM_REGBASE 0x10000 150#define IM_SYPCR (IM_REGBASE+0x0004) 151#define IM_SWSR (IM_REGBASE+0x000e) 152#define IM_BR0 (IM_REGBASE+0x0100) 153#define IM_OR0 (IM_REGBASE+0x0104) 154#define IM_BR1 (IM_REGBASE+0x0108) 155#define IM_OR1 (IM_REGBASE+0x010c) 156#define IM_BR2 (IM_REGBASE+0x0110) 157#define IM_OR2 (IM_REGBASE+0x0114) 158#define IM_MPTPR (IM_REGBASE+0x0184) 159#define IM_PSDMR (IM_REGBASE+0x0190) 160#define IM_PSRT (IM_REGBASE+0x019c) 161#define IM_IMMR (IM_REGBASE+0x01a8) 162#define IM_SCCR (IM_REGBASE+0x0c80) 163 164#elif defined(CONFIG_MPC5xxx) 165 166#define HID0_ICE_BITPOS 16 167#define HID0_DCE_BITPOS 17 168 169#endif 170 171#define curptr r2 172 173#define SYNC \ 174 sync; \ 175 isync 176 177/* 178 * Macros for storing registers into and loading registers from 179 * exception frames. 180 */ 181#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) 182#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) 183#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) 184#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) 185#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) 186#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) 187#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) 188#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) 189#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) 190#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) 191 192/* 193 * GCC sometimes accesses words at negative offsets from the stack 194 * pointer, although the SysV ABI says it shouldn't. To cope with 195 * this, we leave this much untouched space on the stack on exception 196 * entry. 197 */ 198#define STACK_UNDERHEAD 64 199 200/* 201 * Exception entry code. This code runs with address translation 202 * turned off, i.e. using physical addresses. 203 * We assume sprg3 has the physical address of the current 204 * task's thread_struct. 205 */ 206#define EXCEPTION_PROLOG(reg1, reg2) \ 207 mtspr SPRG0,r20; \ 208 mtspr SPRG1,r21; \ 209 mfcr r20; \ 210 subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\ 211 stw r20,_CCR(r21); /* save registers */ \ 212 stw r22,GPR22(r21); \ 213 stw r23,GPR23(r21); \ 214 mfspr r20,SPRG0; \ 215 stw r20,GPR20(r21); \ 216 mfspr r22,SPRG1; \ 217 stw r22,GPR21(r21); \ 218 mflr r20; \ 219 stw r20,_LINK(r21); \ 220 mfctr r22; \ 221 stw r22,_CTR(r21); \ 222 mfspr r20,XER; \ 223 stw r20,_XER(r21); \ 224 mfspr r20, DAR_DEAR; \ 225 stw r20,_DAR(r21); \ 226 mfspr r22,reg1; \ 227 mfspr r23,reg2; \ 228 stw r0,GPR0(r21); \ 229 stw r1,GPR1(r21); \ 230 stw r2,GPR2(r21); \ 231 stw r1,0(r21); \ 232 mr r1,r21; /* set new kernel sp */ \ 233 SAVE_4GPRS(3, r21); 234/* 235 * Note: code which follows this uses cr0.eq (set if from kernel), 236 * r21, r22 (SRR0), and r23 (SRR1). 237 */ 238 239/* 240 * Exception vectors. 241 * 242 * The data words for `hdlr' and `int_return' are initialized with 243 * OFFSET values only; they must be relocated first before they can 244 * be used! 245 */ 246#define COPY_EE(d, s) rlwimi d,s,0,16,16 247#define NOCOPY(d, s) 248 249#ifdef CONFIG_E500 250#define EXC_XFER_TEMPLATE(n, label, hdlr, msr, copyee) \ 251 stw r22,_NIP(r21); \ 252 stw r23,_MSR(r21); \ 253 li r23,n; \ 254 stw r23,TRAP(r21); \ 255 li r20,msr; \ 256 copyee(r20,r23); \ 257 rlwimi r20,r23,0,25,25; \ 258 mtmsr r20; \ 259 bl 1f; \ 2601: mflr r23; \ 261 addis r23,r23,(hdlr - 1b)@ha; \ 262 addi r23,r23,(hdlr - 1b)@l; \ 263 b transfer_to_handler 264 265#define STD_EXCEPTION(n, label, hdlr) \ 266.align 4; \ 267label: \ 268 EXCEPTION_PROLOG(SRR0, SRR1); \ 269 addi r3,r1,STACK_FRAME_OVERHEAD; \ 270 EXC_XFER_TEMPLATE(n, label, hdlr, MSR_KERNEL, NOCOPY) \ 271 272#define CRIT_EXCEPTION(n, label, hdlr) \ 273.align 4; \ 274label: \ 275 EXCEPTION_PROLOG(CSRR0, CSRR1); \ 276 addi r3,r1,STACK_FRAME_OVERHEAD; \ 277 EXC_XFER_TEMPLATE(n, label, hdlr, \ 278 MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \ 279 280#define MCK_EXCEPTION(n, label, hdlr) \ 281.align 4; \ 282label: \ 283 EXCEPTION_PROLOG(MCSRR0, MCSRR1); \ 284 addi r3,r1,STACK_FRAME_OVERHEAD; \ 285 EXC_XFER_TEMPLATE(n, label, hdlr, \ 286 MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \ 287 288#else /* !E500 */ 289 290#define EXC_XFER_TEMPLATE(label, hdlr, msr, copyee) \ 291 bl 1f; \ 2921: mflr r20; \ 293 lwz r20,(.L_ ## label)-1b+8(r20); \ 294 mtlr r20; \ 295 li r20,msr; \ 296 copyee(r20,r23); \ 297 rlwimi r20,r23,0,25,25; \ 298 blrl; \ 299.L_ ## label : \ 300 .long hdlr - _start + _START_OFFSET; \ 301 .long int_return - _start + _START_OFFSET; \ 302 .long transfer_to_handler - _start + _START_OFFSET 303 304#define STD_EXCEPTION(n, label, hdlr) \ 305 . = n; \ 306label: \ 307 EXCEPTION_PROLOG(SRR0, SRR1); \ 308 addi r3,r1,STACK_FRAME_OVERHEAD; \ 309 EXC_XFER_TEMPLATE(label, hdlr, MSR_KERNEL, NOCOPY) \ 310 311#define CRIT_EXCEPTION(n, label, hdlr) \ 312 . = n; \ 313label: \ 314 EXCEPTION_PROLOG(CSRR0, CSRR1); \ 315 addi r3,r1,STACK_FRAME_OVERHEAD; \ 316 EXC_XFER_TEMPLATE(label, hdlr, \ 317 MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \ 318 319#define MCK_EXCEPTION(n, label, hdlr) \ 320 . = n; \ 321label: \ 322 EXCEPTION_PROLOG(MCSRR0, MCSRR1); \ 323 addi r3,r1,STACK_FRAME_OVERHEAD; \ 324 EXC_XFER_TEMPLATE(label, hdlr, \ 325 MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \ 326 327#endif /* !E500 */ 328#endif /* __PPC_ASM_TMPL__ */ 329