1 /* 2 * (C) Copyright 2002 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * (C) Copyright 2010 6 * Michael Zaidman, Kodak, michael.zaidman@kodak.com 7 * post_word_{load|store} cleanup. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 #ifndef _POST_H 12 #define _POST_H 13 14 #ifndef __ASSEMBLY__ 15 #include <common.h> 16 #include <asm/io.h> 17 18 #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) 19 20 #ifndef CONFIG_POST_EXTERNAL_WORD_FUNCS 21 #ifdef CONFIG_SYS_POST_WORD_ADDR 22 #define _POST_WORD_ADDR CONFIG_SYS_POST_WORD_ADDR 23 #else 24 25 #if defined(CONFIG_MPC8360) 26 #include <linux/immap_qe.h> 27 #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) 28 29 #elif defined (CONFIG_MPC85xx) 30 #include <asm/immap_85xx.h> 31 #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET + \ 32 offsetof(ccsr_pic_t, tfrr)) 33 34 #elif defined (CONFIG_MPC86xx) 35 #include <asm/immap_86xx.h> 36 #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PIC_OFFSET + \ 37 offsetof(ccsr_pic_t, tfrr)) 38 #endif 39 40 #ifndef _POST_WORD_ADDR 41 #error "_POST_WORD_ADDR currently not implemented for this platform!" 42 #endif 43 #endif /* CONFIG_SYS_POST_WORD_ADDR */ 44 45 static inline ulong post_word_load (void) 46 { 47 return in_le32((volatile void *)(_POST_WORD_ADDR)); 48 } 49 50 static inline void post_word_store (ulong value) 51 { 52 out_le32((volatile void *)(_POST_WORD_ADDR), value); 53 } 54 55 #else 56 57 extern ulong post_word_load(void); 58 extern void post_word_store(ulong value); 59 60 #endif /* CONFIG_POST_EXTERNAL_WORD_FUNCS */ 61 #endif /* defined (CONFIG_POST) || defined(CONFIG_LOGBUFFER) */ 62 #endif /* __ASSEMBLY__ */ 63 64 #ifdef CONFIG_POST 65 66 #define POST_POWERON 0x01 /* test runs on power-on booting */ 67 #define POST_NORMAL 0x02 /* test runs on normal booting */ 68 #define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */ 69 #define POST_POWERTEST 0x08 /* test runs after watchdog reset */ 70 71 #define POST_COLDBOOT 0x80 /* first boot after power-on */ 72 73 #define POST_ROM 0x0100 /* test runs in ROM */ 74 #define POST_RAM 0x0200 /* test runs in RAM */ 75 #define POST_MANUAL 0x0400 /* test runs on diag command */ 76 #define POST_REBOOT 0x0800 /* test may cause rebooting */ 77 #define POST_PREREL 0x1000 /* test runs before relocation */ 78 79 #define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */ 80 #define POST_STOP 0x4000 /* Interrupt POST sequence on fail */ 81 82 #define POST_MEM (POST_RAM | POST_ROM) 83 #define POST_ALWAYS (POST_NORMAL | \ 84 POST_SLOWTEST | \ 85 POST_MANUAL | \ 86 POST_POWERON ) 87 88 #define POST_FAIL_SAVE 0x80 89 90 #define POST_BEFORE 1 91 #define POST_AFTER 0 92 #define POST_PASSED 1 93 #define POST_FAILED 0 94 95 #ifndef __ASSEMBLY__ 96 97 struct post_test { 98 char *name; 99 char *cmd; 100 char *desc; 101 int flags; 102 int (*test) (int flags); 103 int (*init_f) (void); 104 void (*reloc) (void); 105 unsigned long testid; 106 }; 107 int post_init_f (void); 108 void post_bootmode_init (void); 109 int post_bootmode_get (unsigned int * last_test); 110 void post_bootmode_clear (void); 111 void post_output_backlog ( void ); 112 int post_run (char *name, int flags); 113 int post_info (char *name); 114 int post_log (char *format, ...); 115 #ifdef CONFIG_NEEDS_MANUAL_RELOC 116 void post_reloc (void); 117 #endif 118 unsigned long post_time_ms (unsigned long base); 119 120 extern struct post_test post_list[]; 121 extern unsigned int post_list_size; 122 extern int post_hotkeys_pressed(void); 123 extern int memory_post_test(int flags); 124 125 /* 126 * If GCC is configured to use a version of GAS that supports 127 * the .gnu_attribute directive, it will use that directive to 128 * record certain properties of the output code. 129 * This feature is new to GCC 4.3.0. 130 * .gnu_attribute is new to GAS 2.18. 131 */ 132 #if (__GNUC__ >= 4 && __GNUC_MINOR__ >= 3) 133 /* Tag_GNU_Power_ABI_FP/soft-float */ 134 #define GNU_FPOST_ATTR asm(".gnu_attribute 4, 2"); 135 #else 136 #define GNU_FPOST_ATTR 137 #endif /* __GNUC__ */ 138 #endif /* __ASSEMBLY__ */ 139 140 #define CONFIG_SYS_POST_RTC 0x00000001 141 #define CONFIG_SYS_POST_WATCHDOG 0x00000002 142 #define CONFIG_SYS_POST_MEMORY 0x00000004 143 #define CONFIG_SYS_POST_CPU 0x00000008 144 #define CONFIG_SYS_POST_I2C 0x00000010 145 #define CONFIG_SYS_POST_CACHE 0x00000020 146 #define CONFIG_SYS_POST_UART 0x00000040 147 #define CONFIG_SYS_POST_ETHER 0x00000080 148 #define CONFIG_SYS_POST_USB 0x00000200 149 #define CONFIG_SYS_POST_SPR 0x00000400 150 #define CONFIG_SYS_POST_SYSMON 0x00000800 151 #define CONFIG_SYS_POST_DSP 0x00001000 152 #define CONFIG_SYS_POST_OCM 0x00002000 153 #define CONFIG_SYS_POST_FPU 0x00004000 154 #define CONFIG_SYS_POST_ECC 0x00008000 155 #define CONFIG_SYS_POST_BSPEC1 0x00010000 156 #define CONFIG_SYS_POST_BSPEC2 0x00020000 157 #define CONFIG_SYS_POST_BSPEC3 0x00040000 158 #define CONFIG_SYS_POST_BSPEC4 0x00080000 159 #define CONFIG_SYS_POST_BSPEC5 0x00100000 160 #define CONFIG_SYS_POST_CODEC 0x00200000 161 #define CONFIG_SYS_POST_COPROC 0x00400000 162 #define CONFIG_SYS_POST_FLASH 0x00800000 163 #define CONFIG_SYS_POST_MEM_REGIONS 0x01000000 164 165 #endif /* CONFIG_POST */ 166 167 #endif /* _POST_H */ 168