xref: /openbmc/u-boot/include/phy.h (revision 71e68402)
1 /*
2  * Copyright 2011 Freescale Semiconductor, Inc.
3  *	Andy Fleming <afleming@freescale.com>
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation; either version 2 of
8  * the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18  * MA 02111-1307 USA
19  *
20  * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
21  */
22 
23 #ifndef _PHY_H
24 #define _PHY_H
25 
26 #include <linux/list.h>
27 #include <linux/mii.h>
28 #include <linux/ethtool.h>
29 #include <linux/mdio.h>
30 
31 #define PHY_MAX_ADDR 32
32 
33 #define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
34 				 SUPPORTED_10baseT_Full | \
35 				 SUPPORTED_100baseT_Half | \
36 				 SUPPORTED_100baseT_Full | \
37 				 SUPPORTED_Autoneg | \
38 				 SUPPORTED_TP | \
39 				 SUPPORTED_MII)
40 
41 #define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
42 				 SUPPORTED_1000baseT_Half | \
43 				 SUPPORTED_1000baseT_Full)
44 
45 #define PHY_10G_FEATURES	(PHY_GBIT_FEATURES | \
46 				SUPPORTED_10000baseT_Full)
47 
48 #define PHY_ANEG_TIMEOUT	4000
49 
50 
51 typedef enum {
52 	PHY_INTERFACE_MODE_MII,
53 	PHY_INTERFACE_MODE_GMII,
54 	PHY_INTERFACE_MODE_SGMII,
55 	PHY_INTERFACE_MODE_TBI,
56 	PHY_INTERFACE_MODE_RMII,
57 	PHY_INTERFACE_MODE_RGMII,
58 	PHY_INTERFACE_MODE_RGMII_ID,
59 	PHY_INTERFACE_MODE_RGMII_RXID,
60 	PHY_INTERFACE_MODE_RGMII_TXID,
61 	PHY_INTERFACE_MODE_RTBI,
62 	PHY_INTERFACE_MODE_XGMII,
63 	PHY_INTERFACE_MODE_NONE	/* Must be last */
64 } phy_interface_t;
65 
66 static const char *phy_interface_strings[] = {
67 	[PHY_INTERFACE_MODE_MII]		= "mii",
68 	[PHY_INTERFACE_MODE_GMII]		= "gmii",
69 	[PHY_INTERFACE_MODE_SGMII]		= "sgmii",
70 	[PHY_INTERFACE_MODE_TBI]		= "tbi",
71 	[PHY_INTERFACE_MODE_RMII]		= "rmii",
72 	[PHY_INTERFACE_MODE_RGMII]		= "rgmii",
73 	[PHY_INTERFACE_MODE_RGMII_ID]		= "rgmii-id",
74 	[PHY_INTERFACE_MODE_RGMII_RXID]		= "rgmii-rxid",
75 	[PHY_INTERFACE_MODE_RGMII_TXID]		= "rgmii-txid",
76 	[PHY_INTERFACE_MODE_RTBI]		= "rtbi",
77 	[PHY_INTERFACE_MODE_XGMII]		= "xgmii",
78 	[PHY_INTERFACE_MODE_NONE]		= "",
79 };
80 
81 static inline const char *phy_string_for_interface(phy_interface_t i)
82 {
83 	/* Default to unknown */
84 	if (i > PHY_INTERFACE_MODE_NONE)
85 		i = PHY_INTERFACE_MODE_NONE;
86 
87 	return phy_interface_strings[i];
88 }
89 
90 
91 struct phy_device;
92 
93 #define MDIO_NAME_LEN 32
94 
95 struct mii_dev {
96 	struct list_head link;
97 	char name[MDIO_NAME_LEN];
98 	void *priv;
99 	int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
100 	int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
101 			u16 val);
102 	int (*reset)(struct mii_dev *bus);
103 	struct phy_device *phymap[PHY_MAX_ADDR];
104 	u32 phy_mask;
105 };
106 
107 /* struct phy_driver: a structure which defines PHY behavior
108  *
109  * uid will contain a number which represents the PHY.  During
110  * startup, the driver will poll the PHY to find out what its
111  * UID--as defined by registers 2 and 3--is.  The 32-bit result
112  * gotten from the PHY will be masked to
113  * discard any bits which may change based on revision numbers
114  * unimportant to functionality
115  *
116  */
117 struct phy_driver {
118 	char *name;
119 	unsigned int uid;
120 	unsigned int mask;
121 	unsigned int mmds;
122 
123 	u32 features;
124 
125 	/* Called to do any driver startup necessities */
126 	/* Will be called during phy_connect */
127 	int (*probe)(struct phy_device *phydev);
128 
129 	/* Called to configure the PHY, and modify the controller
130 	 * based on the results.  Should be called after phy_connect */
131 	int (*config)(struct phy_device *phydev);
132 
133 	/* Called when starting up the controller */
134 	int (*startup)(struct phy_device *phydev);
135 
136 	/* Called when bringing down the controller */
137 	int (*shutdown)(struct phy_device *phydev);
138 
139 	struct list_head list;
140 };
141 
142 struct phy_device {
143 	/* Information about the PHY type */
144 	/* And management functions */
145 	struct mii_dev *bus;
146 	struct phy_driver *drv;
147 	void *priv;
148 
149 	struct eth_device *dev;
150 
151 	/* forced speed & duplex (no autoneg)
152 	 * partner speed & duplex & pause (autoneg)
153 	 */
154 	int speed;
155 	int duplex;
156 
157 	/* The most recently read link state */
158 	int link;
159 	int port;
160 	phy_interface_t interface;
161 
162 	u32 advertising;
163 	u32 supported;
164 	u32 mmds;
165 
166 	int autoneg;
167 	int addr;
168 	int pause;
169 	int asym_pause;
170 	u32 phy_id;
171 	u32 flags;
172 };
173 
174 static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
175 {
176 	struct mii_dev *bus = phydev->bus;
177 
178 	return bus->read(bus, phydev->addr, devad, regnum);
179 }
180 
181 static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
182 			u16 val)
183 {
184 	struct mii_dev *bus = phydev->bus;
185 
186 	return bus->write(bus, phydev->addr, devad, regnum, val);
187 }
188 
189 #ifdef CONFIG_PHYLIB_10G
190 extern struct phy_driver gen10g_driver;
191 
192 /* For now, XGMII is the only 10G interface */
193 static inline int is_10g_interface(phy_interface_t interface)
194 {
195 	return interface == PHY_INTERFACE_MODE_XGMII;
196 }
197 
198 #endif
199 
200 int phy_init(void);
201 int phy_reset(struct phy_device *phydev);
202 struct phy_device *phy_connect(struct mii_dev *bus, int addr,
203 				struct eth_device *dev,
204 				phy_interface_t interface);
205 int phy_startup(struct phy_device *phydev);
206 int phy_config(struct phy_device *phydev);
207 int phy_shutdown(struct phy_device *phydev);
208 int phy_register(struct phy_driver *drv);
209 int genphy_config_aneg(struct phy_device *phydev);
210 int genphy_restart_aneg(struct phy_device *phydev);
211 int genphy_update_link(struct phy_device *phydev);
212 int genphy_config(struct phy_device *phydev);
213 int genphy_startup(struct phy_device *phydev);
214 int genphy_shutdown(struct phy_device *phydev);
215 int gen10g_config(struct phy_device *phydev);
216 int gen10g_startup(struct phy_device *phydev);
217 int gen10g_shutdown(struct phy_device *phydev);
218 int gen10g_discover_mmds(struct phy_device *phydev);
219 
220 int phy_atheros_init(void);
221 int phy_broadcom_init(void);
222 int phy_davicom_init(void);
223 int phy_lxt_init(void);
224 int phy_marvell_init(void);
225 int phy_micrel_init(void);
226 int phy_natsemi_init(void);
227 int phy_realtek_init(void);
228 int phy_smsc_init(void);
229 int phy_teranetics_init(void);
230 int phy_vitesse_init(void);
231 
232 /* PHY UIDs for various PHYs that are referenced in external code */
233 #define PHY_UID_TN2020	0x00a19410
234 
235 #endif
236