1 /* 2 * (C) Copyright 2012-2013 3 * Texas Instruments, <www.ti.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 #ifndef PALMAS_H 8 #define PALMAS_H 9 10 #include <common.h> 11 #include <i2c.h> 12 13 /* I2C chip addresses, TW6035/37 */ 14 #define TWL603X_CHIP_P1 0x48 /* Page 1 */ 15 #define TWL603X_CHIP_P2 0x49 /* Page 2 */ 16 #define TWL603X_CHIP_P3 0x4a /* Page 3 */ 17 18 /* TPS659038/39 */ 19 #define TPS65903X_CHIP_P1 0x58 /* Page 1 */ 20 21 /* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */ 22 23 /* LDO1 control/voltage */ 24 #define LDO1_CTRL 0x50 25 #define LDO1_VOLTAGE 0x51 26 27 /* LDO1 control/voltage for LP873x */ 28 #define LP873X_LDO1_ADDR 0x60 29 #define LP873X_LDO1_CTRL 0x9 30 #define LP873X_LDO1_VOLTAGE 0xa 31 #define LP873X_LDO_VOLT_3V0 0x19 32 #define LP873X_LDO_VOLT_1V8 0xa 33 #define LP873X_LDO_CTRL_EN (0x1 << 0) 34 #define LP873X_LDO_CTRL_EN_PINCTRL (0x1 << 1) 35 #define LP873X_LDO_CTRL_RDIS_EN (0x1 << 2) 36 37 /* LDO2 control/voltage */ 38 #define LDO2_CTRL 0x52 39 #define LDO2_VOLTAGE 0x53 40 41 /* LDO9 control/voltage */ 42 #define LDO9_CTRL 0x60 43 #define LDO9_VOLTAGE 0x61 44 45 /* LDOUSB control/voltage */ 46 #define LDOUSB_CTRL 0x64 47 #define LDOUSB_VOLTAGE 0x65 48 #define LDO_CTRL 0x6a 49 50 /* Control of 32 kHz audio clock */ 51 #define CLK32KGAUDIO_CTRL 0xd5 52 53 /* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */ 54 #define SYSEN2_CTRL 0xd9 55 56 /* 57 * Bit field definitions for LDOx_CTRL, SYSENx_CTRL 58 * and some other xxx_CTRL resources: 59 */ 60 #define LDO9_BYP_EN (1 << 6) /* LDO9 only! */ 61 #define RSC_STAT_ON (1 << 4) /* RO status bit! */ 62 #define RSC_MODE_SLEEP (1 << 2) 63 #define RSC_MODE_ACTIVE (1 << 0) 64 65 /* Some LDO voltage values */ 66 #define LDO_VOLT_OFF 0 67 #define LDO_VOLT_1V8 0x13 68 #define LDO_VOLT_3V0 0x2b 69 #define LDO_VOLT_3V3 0x31 70 /* Request bypass, LDO9 only */ 71 #define LDO9_BYPASS 0x3f 72 73 /* SMPS7_CTRL */ 74 #define SMPS7_CTRL 0x30 75 76 /* SMPS9_CTRL */ 77 #define SMPS9_CTRL 0x38 78 #define SMPS9_VOLTAGE 0x3b 79 80 /* SMPS10_CTRL */ 81 #define SMPS10_CTRL 0x3c 82 #define SMPS10_MODE_ACTIVE_D 0x0d 83 84 /* Bit field definitions for SMPSx_CTRL */ 85 #define SMPS_MODE_ACT_AUTO 1 86 #define SMPS_MODE_ACT_ECO 2 87 #define SMPS_MODE_ACT_FPWM 3 88 #define SMPS_MODE_SLP_AUTO (1 << 2) 89 #define SMPS_MODE_SLP_ECO (2 << 2) 90 #define SMPS_MODE_SLP_FPWM (3 << 2) 91 92 /* 93 * Some popular SMPS voltages, all with RANGE=1; note 94 * that RANGE cannot be changed on the fly 95 */ 96 #define SMPS_VOLT_OFF 0 97 #define SMPS_VOLT_1V2 0x90 98 #define SMPS_VOLT_1V8 0xae 99 #define SMPS_VOLT_2V1 0xbd 100 #define SMPS_VOLT_3V0 0xea 101 #define SMPS_VOLT_3V3 0xf9 102 103 /* Backup Battery & VRTC Control */ 104 #define BB_VRTC_CTRL 0xa8 105 /* Bit definitions for BB_VRTC_CTRL */ 106 #define VRTC_EN_SLP (1 << 6) 107 #define VRTC_EN_OFF (1 << 5) 108 #define VRTC_PWEN (1 << 4) 109 #define BB_LOW_ICHRG (1 << 3) 110 #define BB_HIGH_ICHRG (0 << 3) 111 #define BB_VSEL_3V0 (0 << 1) 112 #define BB_VSEL_2V5 (1 << 1) 113 #define BB_VSEL_3V15 (2 << 1) 114 #define BB_VSEL_VBAT (3 << 1) 115 #define BB_CHRG_EN (1 << 0) 116 117 /* 118 * Functions to read and write from TPS659038/TWL6035/TWL6037 119 * or other Palmas family of TI PMICs 120 */ 121 static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val) 122 { 123 return i2c_write(chip_no, reg, 1, &val, 1); 124 } 125 126 static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) 127 { 128 return i2c_read(chip_no, reg, 1, val, 1); 129 } 130 131 void palmas_init_settings(void); 132 int palmas_mmc1_poweron_ldo(uint voltage); 133 int lp873x_mmc1_poweron_ldo(uint voltage); 134 int twl603x_mmc1_set_ldo9(u8 vsel); 135 int twl603x_audio_power(u8 on); 136 int twl603x_enable_bb_charge(u8 bb_fields); 137 int palmas_enable_ss_ldo(void); 138 139 #endif /* PALMAS_H */ 140