1 /* 2 * (C) Copyright 2008 3 * Benjamin Warren, biggerbadderben@gmail.com 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * netdev.h - definitions an prototypes for network devices 26 */ 27 28 #ifndef _NETDEV_H_ 29 #define _NETDEV_H_ 30 31 /* 32 * Board and CPU-specific initialization functions 33 * board_eth_init() has highest priority. cpu_eth_init() only 34 * gets called if board_eth_init() isn't instantiated or fails. 35 * Return values: 36 * 0: success 37 * -1: failure 38 */ 39 40 int board_eth_init(bd_t *bis); 41 int cpu_eth_init(bd_t *bis); 42 43 /* Driver initialization prototypes */ 44 int altera_tse_initialize(u8 dev_num, int mac_base, 45 int sgdma_rx_base, int sgdma_tx_base, 46 u32 sgdma_desc_base, u32 sgdma_desc_size); 47 int at91emac_register(bd_t *bis, unsigned long iobase); 48 int au1x00_enet_initialize(bd_t*); 49 int ax88180_initialize(bd_t *bis); 50 int bfin_EMAC_initialize(bd_t *bis); 51 int calxedaxgmac_initialize(u32 id, ulong base_addr); 52 int cs8900_initialize(u8 dev_num, int base_addr); 53 int davinci_emac_initialize(void); 54 int dc21x4x_initialize(bd_t *bis); 55 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface); 56 int dm9000_initialize(bd_t *bis); 57 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); 58 int e1000_initialize(bd_t *bis); 59 int eepro100_initialize(bd_t *bis); 60 int enc28j60_initialize(unsigned int bus, unsigned int cs, 61 unsigned int max_hz, unsigned int mode); 62 int ep93xx_eth_initialize(u8 dev_num, int base_addr); 63 int eth_3com_initialize (bd_t * bis); 64 int ethoc_initialize(u8 dev_num, int base_addr); 65 int fec_initialize (bd_t *bis); 66 int fecmxc_initialize(bd_t *bis); 67 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr); 68 int ftgmac100_initialize(bd_t *bits); 69 int ftmac100_initialize(bd_t *bits); 70 int greth_initialize(bd_t *bis); 71 void gt6426x_eth_initialize(bd_t *bis); 72 int inca_switch_initialize(bd_t *bis); 73 int ks8695_eth_initialize(void); 74 int lan91c96_initialize(u8 dev_num, int base_addr); 75 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); 76 int mcdmafec_initialize(bd_t *bis); 77 int mcffec_initialize(bd_t *bis); 78 int mpc512x_fec_initialize(bd_t *bis); 79 int mpc5xxx_fec_initialize(bd_t *bis); 80 int mpc8220_fec_initialize(bd_t *bis); 81 int mpc82xx_scc_enet_initialize(bd_t *bis); 82 int mvgbe_initialize(bd_t *bis); 83 int natsemi_initialize(bd_t *bis); 84 int ne2k_register(void); 85 int npe_initialize(bd_t *bis); 86 int ns8382x_initialize(bd_t *bis); 87 int pcnet_initialize(bd_t *bis); 88 int plb2800_eth_initialize(bd_t *bis); 89 int ppc_4xx_eth_initialize (bd_t *bis); 90 int rtl8139_initialize(bd_t *bis); 91 int rtl8169_initialize(bd_t *bis); 92 int scc_initialize(bd_t *bis); 93 int sh_eth_initialize(bd_t *bis); 94 int skge_initialize(bd_t *bis); 95 int smc91111_initialize(u8 dev_num, int base_addr); 96 int smc911x_initialize(u8 dev_num, int base_addr); 97 int tsi108_eth_initialize(bd_t *bis); 98 int uec_standard_init(bd_t *bis); 99 int uli526x_initialize(bd_t *bis); 100 int armada100_fec_register(unsigned long base_addr); 101 int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, 102 unsigned long dma_addr); 103 int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, 104 int txpp, int rxpp); 105 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, 106 unsigned long ctrl_addr); 107 int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); 108 /* 109 * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface 110 * exported by a public hader file, we need a global definition at this point. 111 */ 112 #if defined(CONFIG_XILINX_LL_TEMAC) 113 #define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */ 114 #define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */ 115 #define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */ 116 #endif 117 118 /* Boards with PCI network controllers can call this from their board_eth_init() 119 * function to initialize whatever's on board. 120 * Return value is total # of devices found */ 121 122 static inline int pci_eth_init(bd_t *bis) 123 { 124 int num = 0; 125 126 #ifdef CONFIG_PCI 127 128 #ifdef CONFIG_EEPRO100 129 num += eepro100_initialize(bis); 130 #endif 131 #ifdef CONFIG_TULIP 132 num += dc21x4x_initialize(bis); 133 #endif 134 #ifdef CONFIG_E1000 135 num += e1000_initialize(bis); 136 #endif 137 #ifdef CONFIG_PCNET 138 num += pcnet_initialize(bis); 139 #endif 140 #ifdef CONFIG_NATSEMI 141 num += natsemi_initialize(bis); 142 #endif 143 #ifdef CONFIG_NS8382X 144 num += ns8382x_initialize(bis); 145 #endif 146 #if defined(CONFIG_RTL8139) 147 num += rtl8139_initialize(bis); 148 #endif 149 #if defined(CONFIG_RTL8169) 150 num += rtl8169_initialize(bis); 151 #endif 152 #if defined(CONFIG_ULI526X) 153 num += uli526x_initialize(bis); 154 #endif 155 156 #endif /* CONFIG_PCI */ 157 return num; 158 } 159 160 /* 161 * Boards with mv88e61xx switch can use this by defining 162 * CONFIG_MV88E61XX_SWITCH in respective board configheader file 163 * the stuct and enums here are used to specify switch configuration params 164 */ 165 #if defined(CONFIG_MV88E61XX_SWITCH) 166 167 /* constants for any 88E61xx switch */ 168 #define MV88E61XX_MAX_PORTS_NUM 6 169 170 enum mv88e61xx_cfg_mdip { 171 MV88E61XX_MDIP_NOCHANGE, 172 MV88E61XX_MDIP_REVERSE 173 }; 174 175 enum mv88e61xx_cfg_ledinit { 176 MV88E61XX_LED_INIT_DIS, 177 MV88E61XX_LED_INIT_EN 178 }; 179 180 enum mv88e61xx_cfg_rgmiid { 181 MV88E61XX_RGMII_DELAY_DIS, 182 MV88E61XX_RGMII_DELAY_EN 183 }; 184 185 enum mv88e61xx_cfg_prtstt { 186 MV88E61XX_PORTSTT_DISABLED, 187 MV88E61XX_PORTSTT_BLOCKING, 188 MV88E61XX_PORTSTT_LEARNING, 189 MV88E61XX_PORTSTT_FORWARDING 190 }; 191 192 struct mv88e61xx_config { 193 char *name; 194 u8 vlancfg[MV88E61XX_MAX_PORTS_NUM]; 195 enum mv88e61xx_cfg_rgmiid rgmii_delay; 196 enum mv88e61xx_cfg_prtstt portstate; 197 enum mv88e61xx_cfg_ledinit led_init; 198 enum mv88e61xx_cfg_mdip mdip; 199 u32 ports_enabled; 200 u8 cpuport; 201 }; 202 203 /* 204 * Common mappings for Internal VLANs 205 * These mappings consider that all ports are useable; the driver 206 * will mask inexistent/unused ports. 207 */ 208 209 /* Switch mode : routes any port to any port */ 210 #define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F } 211 212 /* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */ 213 #define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F } 214 215 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); 216 #endif /* CONFIG_MV88E61XX_SWITCH */ 217 218 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id); 219 #ifdef CONFIG_PHYLIB 220 struct phy_device; 221 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, 222 struct mii_dev *bus, struct phy_device *phydev); 223 #else 224 /* 225 * Allow FEC to fine-tune MII configuration on boards which require this. 226 */ 227 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int)); 228 #endif 229 230 #endif /* _NETDEV_H_ */ 231