1 /* 2 * (C) Copyright 2008 3 * Benjamin Warren, biggerbadderben@gmail.com 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * netdev.h - definitions an prototypes for network devices 10 */ 11 12 #ifndef _NETDEV_H_ 13 #define _NETDEV_H_ 14 15 /* 16 * Board and CPU-specific initialization functions 17 * board_eth_init() has highest priority. cpu_eth_init() only 18 * gets called if board_eth_init() isn't instantiated or fails. 19 * Return values: 20 * 0: success 21 * -1: failure 22 */ 23 24 int board_eth_init(bd_t *bis); 25 int cpu_eth_init(bd_t *bis); 26 27 /* Driver initialization prototypes */ 28 int at91emac_register(bd_t *bis, unsigned long iobase); 29 int au1x00_enet_initialize(bd_t*); 30 int ax88180_initialize(bd_t *bis); 31 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num); 32 int bfin_EMAC_initialize(bd_t *bis); 33 int calxedaxgmac_initialize(u32 id, ulong base_addr); 34 int cs8900_initialize(u8 dev_num, int base_addr); 35 int davinci_emac_initialize(void); 36 int dc21x4x_initialize(bd_t *bis); 37 int designware_initialize(ulong base_addr, u32 interface); 38 int dm9000_initialize(bd_t *bis); 39 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); 40 int e1000_initialize(bd_t *bis); 41 int eepro100_initialize(bd_t *bis); 42 int enc28j60_initialize(unsigned int bus, unsigned int cs, 43 unsigned int max_hz, unsigned int mode); 44 int ep93xx_eth_initialize(u8 dev_num, int base_addr); 45 int eth_3com_initialize (bd_t * bis); 46 int ethoc_initialize(u8 dev_num, int base_addr); 47 int fec_initialize (bd_t *bis); 48 int fecmxc_initialize(bd_t *bis); 49 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr); 50 int ftgmac100_initialize(bd_t *bits); 51 int ftmac100_initialize(bd_t *bits); 52 int ftmac110_initialize(bd_t *bits); 53 void gt6426x_eth_initialize(bd_t *bis); 54 int ks8851_mll_initialize(u8 dev_num, int base_addr); 55 int lan91c96_initialize(u8 dev_num, int base_addr); 56 int lpc32xx_eth_initialize(bd_t *bis); 57 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); 58 int mcdmafec_initialize(bd_t *bis); 59 int mcffec_initialize(bd_t *bis); 60 int mpc512x_fec_initialize(bd_t *bis); 61 int mpc5xxx_fec_initialize(bd_t *bis); 62 int mpc82xx_scc_enet_initialize(bd_t *bis); 63 int mvgbe_initialize(bd_t *bis); 64 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr); 65 int natsemi_initialize(bd_t *bis); 66 int ne2k_register(void); 67 int npe_initialize(bd_t *bis); 68 int ns8382x_initialize(bd_t *bis); 69 int pcnet_initialize(bd_t *bis); 70 int ppc_4xx_eth_initialize (bd_t *bis); 71 int rtl8139_initialize(bd_t *bis); 72 int rtl8169_initialize(bd_t *bis); 73 int scc_initialize(bd_t *bis); 74 int sh_eth_initialize(bd_t *bis); 75 int skge_initialize(bd_t *bis); 76 int smc91111_initialize(u8 dev_num, int base_addr); 77 int smc911x_initialize(u8 dev_num, int base_addr); 78 int tsi108_eth_initialize(bd_t *bis); 79 int uec_standard_init(bd_t *bis); 80 int uli526x_initialize(bd_t *bis); 81 int armada100_fec_register(unsigned long base_addr); 82 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, 83 unsigned long ctrl_addr); 84 /* 85 * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface 86 * exported by a public hader file, we need a global definition at this point. 87 */ 88 #if defined(CONFIG_XILINX_LL_TEMAC) 89 #define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */ 90 #define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */ 91 #define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */ 92 #endif 93 94 /* Boards with PCI network controllers can call this from their board_eth_init() 95 * function to initialize whatever's on board. 96 * Return value is total # of devices found */ 97 98 static inline int pci_eth_init(bd_t *bis) 99 { 100 int num = 0; 101 102 #ifdef CONFIG_PCI 103 104 #ifdef CONFIG_EEPRO100 105 num += eepro100_initialize(bis); 106 #endif 107 #ifdef CONFIG_TULIP 108 num += dc21x4x_initialize(bis); 109 #endif 110 #ifdef CONFIG_E1000 111 num += e1000_initialize(bis); 112 #endif 113 #ifdef CONFIG_PCNET 114 num += pcnet_initialize(bis); 115 #endif 116 #ifdef CONFIG_NATSEMI 117 num += natsemi_initialize(bis); 118 #endif 119 #ifdef CONFIG_NS8382X 120 num += ns8382x_initialize(bis); 121 #endif 122 #if defined(CONFIG_RTL8139) 123 num += rtl8139_initialize(bis); 124 #endif 125 #if defined(CONFIG_RTL8169) 126 num += rtl8169_initialize(bis); 127 #endif 128 #if defined(CONFIG_ULI526X) 129 num += uli526x_initialize(bis); 130 #endif 131 132 #endif /* CONFIG_PCI */ 133 return num; 134 } 135 136 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id); 137 #ifdef CONFIG_PHYLIB 138 struct phy_device; 139 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, 140 struct mii_dev *bus, struct phy_device *phydev); 141 #else 142 /* 143 * Allow FEC to fine-tune MII configuration on boards which require this. 144 */ 145 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int)); 146 #endif 147 148 #endif /* _NETDEV_H_ */ 149