1 /* 2 * (C) Copyright 2008 3 * Benjamin Warren, biggerbadderben@gmail.com 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * netdev.h - definitions an prototypes for network devices 26 */ 27 28 #ifndef _NETDEV_H_ 29 #define _NETDEV_H_ 30 31 /* 32 * Board and CPU-specific initialization functions 33 * board_eth_init() has highest priority. cpu_eth_init() only 34 * gets called if board_eth_init() isn't instantiated or fails. 35 * Return values: 36 * 0: success 37 * -1: failure 38 */ 39 40 int board_eth_init(bd_t *bis); 41 int cpu_eth_init(bd_t *bis); 42 43 /* Driver initialization prototypes */ 44 int altera_tse_initialize(u8 dev_num, int mac_base, 45 int sgdma_rx_base, int sgdma_tx_base); 46 int ax88180_initialize(bd_t *bis); 47 int au1x00_enet_initialize(bd_t*); 48 int at91emac_register(bd_t *bis, unsigned long iobase); 49 int bfin_EMAC_initialize(bd_t *bis); 50 int cs8900_initialize(u8 dev_num, int base_addr); 51 int dc21x4x_initialize(bd_t *bis); 52 int davinci_emac_initialize(void); 53 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); 54 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); 55 int e1000_initialize(bd_t *bis); 56 int eepro100_initialize(bd_t *bis); 57 int enc28j60_initialize(unsigned int bus, unsigned int cs, 58 unsigned int max_hz, unsigned int mode); 59 int ep93xx_eth_initialize(u8 dev_num, int base_addr); 60 int ethoc_initialize(u8 dev_num, int base_addr); 61 int eth_3com_initialize (bd_t * bis); 62 int fec_initialize (bd_t *bis); 63 int fecmxc_initialize (bd_t *bis); 64 int ftmac100_initialize(bd_t *bits); 65 int greth_initialize(bd_t *bis); 66 void gt6426x_eth_initialize(bd_t *bis); 67 int inca_switch_initialize(bd_t *bis); 68 int lan91c96_initialize(u8 dev_num, int base_addr); 69 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); 70 int mcdmafec_initialize(bd_t *bis); 71 int mcffec_initialize(bd_t *bis); 72 int mpc512x_fec_initialize(bd_t *bis); 73 int mpc5xxx_fec_initialize(bd_t *bis); 74 int mpc8220_fec_initialize(bd_t *bis); 75 int mpc82xx_scc_enet_initialize(bd_t *bis); 76 int mvgbe_initialize(bd_t *bis); 77 int natsemi_initialize(bd_t *bis); 78 int npe_initialize(bd_t *bis); 79 int ns8382x_initialize(bd_t *bis); 80 int pcnet_initialize(bd_t *bis); 81 int plb2800_eth_initialize(bd_t *bis); 82 int ppc_4xx_eth_initialize (bd_t *bis); 83 int rtl8139_initialize(bd_t *bis); 84 int rtl8169_initialize(bd_t *bis); 85 int scc_initialize(bd_t *bis); 86 int skge_initialize(bd_t *bis); 87 int smc911x_initialize(u8 dev_num, int base_addr); 88 int smc91111_initialize(u8 dev_num, int base_addr); 89 int tsi108_eth_initialize(bd_t *bis); 90 int uec_standard_init(bd_t *bis); 91 int uli526x_initialize(bd_t *bis); 92 int xilinx_emaclite_initialize (bd_t *bis, int base_addr); 93 int sh_eth_initialize(bd_t *bis); 94 int dm9000_initialize(bd_t *bis); 95 96 /* Boards with PCI network controllers can call this from their board_eth_init() 97 * function to initialize whatever's on board. 98 * Return value is total # of devices found */ 99 100 static inline int pci_eth_init(bd_t *bis) 101 { 102 int num = 0; 103 104 #ifdef CONFIG_PCI 105 106 #ifdef CONFIG_EEPRO100 107 num += eepro100_initialize(bis); 108 #endif 109 #ifdef CONFIG_TULIP 110 num += dc21x4x_initialize(bis); 111 #endif 112 #ifdef CONFIG_E1000 113 num += e1000_initialize(bis); 114 #endif 115 #ifdef CONFIG_PCNET 116 num += pcnet_initialize(bis); 117 #endif 118 #ifdef CONFIG_NATSEMI 119 num += natsemi_initialize(bis); 120 #endif 121 #ifdef CONFIG_NS8382X 122 num += ns8382x_initialize(bis); 123 #endif 124 #if defined(CONFIG_RTL8139) 125 num += rtl8139_initialize(bis); 126 #endif 127 #if defined(CONFIG_RTL8169) 128 num += rtl8169_initialize(bis); 129 #endif 130 #if defined(CONFIG_ULI526X) 131 num += uli526x_initialize(bis); 132 #endif 133 134 #endif /* CONFIG_PCI */ 135 return num; 136 } 137 138 /* 139 * Boards with mv88e61xx switch can use this by defining 140 * CONFIG_MV88E61XX_SWITCH in respective board configheader file 141 * the stuct and enums here are used to specify switch configuration params 142 */ 143 #if defined(CONFIG_MV88E61XX_SWITCH) 144 enum mv88e61xx_cfg_vlan { 145 MV88E61XX_VLANCFG_DEFAULT, 146 MV88E61XX_VLANCFG_ROUTER 147 }; 148 149 enum mv88e61xx_cfg_mdip { 150 MV88E61XX_MDIP_NOCHANGE, 151 MV88E61XX_MDIP_REVERSE 152 }; 153 154 enum mv88e61xx_cfg_ledinit { 155 MV88E61XX_LED_INIT_DIS, 156 MV88E61XX_LED_INIT_EN 157 }; 158 159 enum mv88e61xx_cfg_rgmiid { 160 MV88E61XX_RGMII_DELAY_DIS, 161 MV88E61XX_RGMII_DELAY_EN 162 }; 163 164 enum mv88e61xx_cfg_prtstt { 165 MV88E61XX_PORTSTT_DISABLED, 166 MV88E61XX_PORTSTT_BLOCKING, 167 MV88E61XX_PORTSTT_LEARNING, 168 MV88E61XX_PORTSTT_FORWARDING 169 }; 170 171 struct mv88e61xx_config { 172 char *name; 173 enum mv88e61xx_cfg_vlan vlancfg; 174 enum mv88e61xx_cfg_rgmiid rgmii_delay; 175 enum mv88e61xx_cfg_prtstt portstate; 176 enum mv88e61xx_cfg_ledinit led_init; 177 enum mv88e61xx_cfg_mdip mdip; 178 u32 ports_enabled; 179 u8 cpuport; 180 }; 181 182 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); 183 #endif /* CONFIG_MV88E61XX_SWITCH */ 184 185 #endif /* _NETDEV_H_ */ 186