xref: /openbmc/u-boot/include/netdev.h (revision 4349b55b)
1 /*
2  * (C) Copyright 2008
3  * Benjamin Warren, biggerbadderben@gmail.com
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * netdev.h - definitions an prototypes for network devices
10  */
11 
12 #ifndef _NETDEV_H_
13 #define _NETDEV_H_
14 
15 /*
16  * Board and CPU-specific initialization functions
17  * board_eth_init() has highest priority.  cpu_eth_init() only
18  * gets called if board_eth_init() isn't instantiated or fails.
19  * Return values:
20  *      0: success
21  *     -1: failure
22  */
23 
24 int board_eth_init(bd_t *bis);
25 int cpu_eth_init(bd_t *bis);
26 
27 /* Driver initialization prototypes */
28 int at91emac_register(bd_t *bis, unsigned long iobase);
29 int au1x00_enet_initialize(bd_t*);
30 int ax88180_initialize(bd_t *bis);
31 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
32 int bfin_EMAC_initialize(bd_t *bis);
33 int calxedaxgmac_initialize(u32 id, ulong base_addr);
34 int cs8900_initialize(u8 dev_num, int base_addr);
35 int davinci_emac_initialize(void);
36 int dc21x4x_initialize(bd_t *bis);
37 int designware_initialize(ulong base_addr, u32 interface);
38 int dm9000_initialize(bd_t *bis);
39 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
40 int e1000_initialize(bd_t *bis);
41 int eepro100_initialize(bd_t *bis);
42 int enc28j60_initialize(unsigned int bus, unsigned int cs,
43 	unsigned int max_hz, unsigned int mode);
44 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
45 int eth_3com_initialize (bd_t * bis);
46 int ethoc_initialize(u8 dev_num, int base_addr);
47 int fec_initialize (bd_t *bis);
48 int fecmxc_initialize(bd_t *bis);
49 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
50 int ftgmac100_initialize(bd_t *bits);
51 int ftmac100_initialize(bd_t *bits);
52 int ftmac110_initialize(bd_t *bits);
53 int greth_initialize(bd_t *bis);
54 void gt6426x_eth_initialize(bd_t *bis);
55 int ks8851_mll_initialize(u8 dev_num, int base_addr);
56 int lan91c96_initialize(u8 dev_num, int base_addr);
57 int lpc32xx_eth_initialize(bd_t *bis);
58 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
59 int mcdmafec_initialize(bd_t *bis);
60 int mcffec_initialize(bd_t *bis);
61 int mpc512x_fec_initialize(bd_t *bis);
62 int mpc5xxx_fec_initialize(bd_t *bis);
63 int mpc82xx_scc_enet_initialize(bd_t *bis);
64 int mvgbe_initialize(bd_t *bis);
65 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
66 int natsemi_initialize(bd_t *bis);
67 int ne2k_register(void);
68 int npe_initialize(bd_t *bis);
69 int ns8382x_initialize(bd_t *bis);
70 int pcnet_initialize(bd_t *bis);
71 int ppc_4xx_eth_initialize (bd_t *bis);
72 int rtl8139_initialize(bd_t *bis);
73 int rtl8169_initialize(bd_t *bis);
74 int scc_initialize(bd_t *bis);
75 int sh_eth_initialize(bd_t *bis);
76 int skge_initialize(bd_t *bis);
77 int smc91111_initialize(u8 dev_num, int base_addr);
78 int smc911x_initialize(u8 dev_num, int base_addr);
79 int tsi108_eth_initialize(bd_t *bis);
80 int uec_standard_init(bd_t *bis);
81 int uli526x_initialize(bd_t *bis);
82 int armada100_fec_register(unsigned long base_addr);
83 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
84 						unsigned long ctrl_addr);
85 /*
86  * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
87  * exported by a public hader file, we need a global definition at this point.
88  */
89 #if defined(CONFIG_XILINX_LL_TEMAC)
90 #define XILINX_LL_TEMAC_M_FIFO		0	/* use FIFO Ctrl */
91 #define XILINX_LL_TEMAC_M_SDMA_PLB	(1 << 0)/* use SDMA Ctrl via PLB */
92 #define XILINX_LL_TEMAC_M_SDMA_DCR	(1 << 1)/* use SDMA Ctrl via DCR */
93 #endif
94 
95 /* Boards with PCI network controllers can call this from their board_eth_init()
96  * function to initialize whatever's on board.
97  * Return value is total # of devices found */
98 
99 static inline int pci_eth_init(bd_t *bis)
100 {
101 	int num = 0;
102 
103 #ifdef CONFIG_PCI
104 
105 #ifdef CONFIG_EEPRO100
106 	num += eepro100_initialize(bis);
107 #endif
108 #ifdef CONFIG_TULIP
109 	num += dc21x4x_initialize(bis);
110 #endif
111 #ifdef CONFIG_E1000
112 	num += e1000_initialize(bis);
113 #endif
114 #ifdef CONFIG_PCNET
115 	num += pcnet_initialize(bis);
116 #endif
117 #ifdef CONFIG_NATSEMI
118 	num += natsemi_initialize(bis);
119 #endif
120 #ifdef CONFIG_NS8382X
121 	num += ns8382x_initialize(bis);
122 #endif
123 #if defined(CONFIG_RTL8139)
124 	num += rtl8139_initialize(bis);
125 #endif
126 #if defined(CONFIG_RTL8169)
127 	num += rtl8169_initialize(bis);
128 #endif
129 #if defined(CONFIG_ULI526X)
130 	num += uli526x_initialize(bis);
131 #endif
132 
133 #endif  /* CONFIG_PCI */
134 	return num;
135 }
136 
137 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
138 #ifdef CONFIG_PHYLIB
139 struct phy_device;
140 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
141 		struct mii_dev *bus, struct phy_device *phydev);
142 #else
143 /*
144  * Allow FEC to fine-tune MII configuration on boards which require this.
145  */
146 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
147 #endif
148 
149 #endif /* _NETDEV_H_ */
150