1 /* 2 * (C) Copyright 2008 3 * Benjamin Warren, biggerbadderben@gmail.com 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * netdev.h - definitions an prototypes for network devices 26 */ 27 28 #ifndef _NETDEV_H_ 29 #define _NETDEV_H_ 30 31 /* 32 * Board and CPU-specific initialization functions 33 * board_eth_init() has highest priority. cpu_eth_init() only 34 * gets called if board_eth_init() isn't instantiated or fails. 35 * Return values: 36 * 0: success 37 * -1: failure 38 */ 39 40 int board_eth_init(bd_t *bis); 41 int cpu_eth_init(bd_t *bis); 42 43 /* Driver initialization prototypes */ 44 int altera_tse_initialize(u8 dev_num, int mac_base, 45 int sgdma_rx_base, int sgdma_tx_base); 46 int at91emac_register(bd_t *bis, unsigned long iobase); 47 int au1x00_enet_initialize(bd_t*); 48 int ax88180_initialize(bd_t *bis); 49 int bfin_EMAC_initialize(bd_t *bis); 50 int cs8900_initialize(u8 dev_num, int base_addr); 51 int davinci_emac_initialize(void); 52 int dc21x4x_initialize(bd_t *bis); 53 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); 54 int dm9000_initialize(bd_t *bis); 55 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); 56 int e1000_initialize(bd_t *bis); 57 int eepro100_initialize(bd_t *bis); 58 int enc28j60_initialize(unsigned int bus, unsigned int cs, 59 unsigned int max_hz, unsigned int mode); 60 int ep93xx_eth_initialize(u8 dev_num, int base_addr); 61 int eth_3com_initialize (bd_t * bis); 62 int ethoc_initialize(u8 dev_num, int base_addr); 63 int fec_initialize (bd_t *bis); 64 int fecmxc_initialize (bd_t *bis); 65 int fecmxc_initialize(bd_t *bis); 66 int ftgmac100_initialize(bd_t *bits); 67 int ftmac100_initialize(bd_t *bits); 68 int greth_initialize(bd_t *bis); 69 void gt6426x_eth_initialize(bd_t *bis); 70 int inca_switch_initialize(bd_t *bis); 71 int ks8695_eth_initialize(void); 72 int lan91c96_initialize(u8 dev_num, int base_addr); 73 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); 74 int mcdmafec_initialize(bd_t *bis); 75 int mcffec_initialize(bd_t *bis); 76 int mpc512x_fec_initialize(bd_t *bis); 77 int mpc5xxx_fec_initialize(bd_t *bis); 78 int mpc8220_fec_initialize(bd_t *bis); 79 int mpc82xx_scc_enet_initialize(bd_t *bis); 80 int mvgbe_initialize(bd_t *bis); 81 int natsemi_initialize(bd_t *bis); 82 int npe_initialize(bd_t *bis); 83 int ns8382x_initialize(bd_t *bis); 84 int pcnet_initialize(bd_t *bis); 85 int plb2800_eth_initialize(bd_t *bis); 86 int ppc_4xx_eth_initialize (bd_t *bis); 87 int rtl8139_initialize(bd_t *bis); 88 int rtl8169_initialize(bd_t *bis); 89 int scc_initialize(bd_t *bis); 90 int sh_eth_initialize(bd_t *bis); 91 int skge_initialize(bd_t *bis); 92 int smc91111_initialize(u8 dev_num, int base_addr); 93 int smc911x_initialize(u8 dev_num, int base_addr); 94 int tsi108_eth_initialize(bd_t *bis); 95 int uec_standard_init(bd_t *bis); 96 int uli526x_initialize(bd_t *bis); 97 int armada100_fec_register(unsigned long base_addr); 98 int xilinx_emaclite_initialize (bd_t *bis, int base_addr); 99 100 /* Boards with PCI network controllers can call this from their board_eth_init() 101 * function to initialize whatever's on board. 102 * Return value is total # of devices found */ 103 104 static inline int pci_eth_init(bd_t *bis) 105 { 106 int num = 0; 107 108 #ifdef CONFIG_PCI 109 110 #ifdef CONFIG_EEPRO100 111 num += eepro100_initialize(bis); 112 #endif 113 #ifdef CONFIG_TULIP 114 num += dc21x4x_initialize(bis); 115 #endif 116 #ifdef CONFIG_E1000 117 num += e1000_initialize(bis); 118 #endif 119 #ifdef CONFIG_PCNET 120 num += pcnet_initialize(bis); 121 #endif 122 #ifdef CONFIG_NATSEMI 123 num += natsemi_initialize(bis); 124 #endif 125 #ifdef CONFIG_NS8382X 126 num += ns8382x_initialize(bis); 127 #endif 128 #if defined(CONFIG_RTL8139) 129 num += rtl8139_initialize(bis); 130 #endif 131 #if defined(CONFIG_RTL8169) 132 num += rtl8169_initialize(bis); 133 #endif 134 #if defined(CONFIG_ULI526X) 135 num += uli526x_initialize(bis); 136 #endif 137 138 #endif /* CONFIG_PCI */ 139 return num; 140 } 141 142 /* 143 * Boards with mv88e61xx switch can use this by defining 144 * CONFIG_MV88E61XX_SWITCH in respective board configheader file 145 * the stuct and enums here are used to specify switch configuration params 146 */ 147 #if defined(CONFIG_MV88E61XX_SWITCH) 148 enum mv88e61xx_cfg_vlan { 149 MV88E61XX_VLANCFG_DEFAULT, 150 MV88E61XX_VLANCFG_ROUTER 151 }; 152 153 enum mv88e61xx_cfg_mdip { 154 MV88E61XX_MDIP_NOCHANGE, 155 MV88E61XX_MDIP_REVERSE 156 }; 157 158 enum mv88e61xx_cfg_ledinit { 159 MV88E61XX_LED_INIT_DIS, 160 MV88E61XX_LED_INIT_EN 161 }; 162 163 enum mv88e61xx_cfg_rgmiid { 164 MV88E61XX_RGMII_DELAY_DIS, 165 MV88E61XX_RGMII_DELAY_EN 166 }; 167 168 enum mv88e61xx_cfg_prtstt { 169 MV88E61XX_PORTSTT_DISABLED, 170 MV88E61XX_PORTSTT_BLOCKING, 171 MV88E61XX_PORTSTT_LEARNING, 172 MV88E61XX_PORTSTT_FORWARDING 173 }; 174 175 struct mv88e61xx_config { 176 char *name; 177 enum mv88e61xx_cfg_vlan vlancfg; 178 enum mv88e61xx_cfg_rgmiid rgmii_delay; 179 enum mv88e61xx_cfg_prtstt portstate; 180 enum mv88e61xx_cfg_ledinit led_init; 181 enum mv88e61xx_cfg_mdip mdip; 182 u32 ports_enabled; 183 u8 cpuport; 184 }; 185 186 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); 187 #endif /* CONFIG_MV88E61XX_SWITCH */ 188 189 #endif /* _NETDEV_H_ */ 190