xref: /openbmc/u-boot/include/netdev.h (revision 3f82d89d)
1 /*
2  * (C) Copyright 2008
3  * Benjamin Warren, biggerbadderben@gmail.com
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 /*
25  * netdev.h - definitions an prototypes for network devices
26  */
27 
28 #ifndef _NETDEV_H_
29 #define _NETDEV_H_
30 
31 /*
32  * Board and CPU-specific initialization functions
33  * board_eth_init() has highest priority.  cpu_eth_init() only
34  * gets called if board_eth_init() isn't instantiated or fails.
35  * Return values:
36  *      0: success
37  *     -1: failure
38  */
39 
40 int board_eth_init(bd_t *bis);
41 int cpu_eth_init(bd_t *bis);
42 
43 /* Driver initialization prototypes */
44 int altera_tse_initialize(u8 dev_num, int mac_base,
45 			  int sgdma_rx_base, int sgdma_tx_base,
46 			  u32 sgdma_desc_base, u32 sgdma_desc_size);
47 int at91emac_register(bd_t *bis, unsigned long iobase);
48 int au1x00_enet_initialize(bd_t*);
49 int ax88180_initialize(bd_t *bis);
50 int bfin_EMAC_initialize(bd_t *bis);
51 int calxedaxgmac_initialize(u32 id, ulong base_addr);
52 int cs8900_initialize(u8 dev_num, int base_addr);
53 int davinci_emac_initialize(void);
54 int dc21x4x_initialize(bd_t *bis);
55 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
56 int dm9000_initialize(bd_t *bis);
57 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
58 int e1000_initialize(bd_t *bis);
59 int eepro100_initialize(bd_t *bis);
60 int enc28j60_initialize(unsigned int bus, unsigned int cs,
61 	unsigned int max_hz, unsigned int mode);
62 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
63 int eth_3com_initialize (bd_t * bis);
64 int ethoc_initialize(u8 dev_num, int base_addr);
65 int fec_initialize (bd_t *bis);
66 int fecmxc_initialize(bd_t *bis);
67 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
68 int ftgmac100_initialize(bd_t *bits);
69 int ftmac100_initialize(bd_t *bits);
70 int greth_initialize(bd_t *bis);
71 void gt6426x_eth_initialize(bd_t *bis);
72 int inca_switch_initialize(bd_t *bis);
73 int ks8695_eth_initialize(void);
74 int lan91c96_initialize(u8 dev_num, int base_addr);
75 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
76 int mcdmafec_initialize(bd_t *bis);
77 int mcffec_initialize(bd_t *bis);
78 int mpc512x_fec_initialize(bd_t *bis);
79 int mpc5xxx_fec_initialize(bd_t *bis);
80 int mpc8220_fec_initialize(bd_t *bis);
81 int mpc82xx_scc_enet_initialize(bd_t *bis);
82 int mvgbe_initialize(bd_t *bis);
83 int natsemi_initialize(bd_t *bis);
84 int ne2k_register(void);
85 int npe_initialize(bd_t *bis);
86 int ns8382x_initialize(bd_t *bis);
87 int pcnet_initialize(bd_t *bis);
88 int plb2800_eth_initialize(bd_t *bis);
89 int ppc_4xx_eth_initialize (bd_t *bis);
90 int rtl8139_initialize(bd_t *bis);
91 int rtl8169_initialize(bd_t *bis);
92 int scc_initialize(bd_t *bis);
93 int sh_eth_initialize(bd_t *bis);
94 int skge_initialize(bd_t *bis);
95 int smc91111_initialize(u8 dev_num, int base_addr);
96 int smc911x_initialize(u8 dev_num, int base_addr);
97 int tsi108_eth_initialize(bd_t *bis);
98 int uec_standard_init(bd_t *bis);
99 int uli526x_initialize(bd_t *bis);
100 int armada100_fec_register(unsigned long base_addr);
101 int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
102 							unsigned long dma_addr);
103 int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
104 							int txpp, int rxpp);
105 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
106 						unsigned long ctrl_addr);
107 
108 /*
109  * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
110  * exported by a public hader file, we need a global definition at this point.
111  */
112 #if defined(CONFIG_XILINX_LL_TEMAC)
113 #define XILINX_LL_TEMAC_M_FIFO		0	/* use FIFO Ctrl */
114 #define XILINX_LL_TEMAC_M_SDMA_PLB	(1 << 0)/* use SDMA Ctrl via PLB */
115 #define XILINX_LL_TEMAC_M_SDMA_DCR	(1 << 1)/* use SDMA Ctrl via DCR */
116 #endif
117 
118 /* Boards with PCI network controllers can call this from their board_eth_init()
119  * function to initialize whatever's on board.
120  * Return value is total # of devices found */
121 
122 static inline int pci_eth_init(bd_t *bis)
123 {
124 	int num = 0;
125 
126 #ifdef CONFIG_PCI
127 
128 #ifdef CONFIG_EEPRO100
129 	num += eepro100_initialize(bis);
130 #endif
131 #ifdef CONFIG_TULIP
132 	num += dc21x4x_initialize(bis);
133 #endif
134 #ifdef CONFIG_E1000
135 	num += e1000_initialize(bis);
136 #endif
137 #ifdef CONFIG_PCNET
138 	num += pcnet_initialize(bis);
139 #endif
140 #ifdef CONFIG_NATSEMI
141 	num += natsemi_initialize(bis);
142 #endif
143 #ifdef CONFIG_NS8382X
144 	num += ns8382x_initialize(bis);
145 #endif
146 #if defined(CONFIG_RTL8139)
147 	num += rtl8139_initialize(bis);
148 #endif
149 #if defined(CONFIG_RTL8169)
150 	num += rtl8169_initialize(bis);
151 #endif
152 #if defined(CONFIG_ULI526X)
153 	num += uli526x_initialize(bis);
154 #endif
155 
156 #endif  /* CONFIG_PCI */
157 	return num;
158 }
159 
160 /*
161  * Boards with mv88e61xx switch can use this by defining
162  * CONFIG_MV88E61XX_SWITCH in respective board configheader file
163  * the stuct and enums here are used to specify switch configuration params
164  */
165 #if defined(CONFIG_MV88E61XX_SWITCH)
166 enum mv88e61xx_cfg_vlan {
167 	MV88E61XX_VLANCFG_DEFAULT,
168 	MV88E61XX_VLANCFG_ROUTER
169 };
170 
171 enum mv88e61xx_cfg_mdip {
172 	MV88E61XX_MDIP_NOCHANGE,
173 	MV88E61XX_MDIP_REVERSE
174 };
175 
176 enum mv88e61xx_cfg_ledinit {
177 	MV88E61XX_LED_INIT_DIS,
178 	MV88E61XX_LED_INIT_EN
179 };
180 
181 enum mv88e61xx_cfg_rgmiid {
182 	MV88E61XX_RGMII_DELAY_DIS,
183 	MV88E61XX_RGMII_DELAY_EN
184 };
185 
186 enum mv88e61xx_cfg_prtstt {
187 	MV88E61XX_PORTSTT_DISABLED,
188 	MV88E61XX_PORTSTT_BLOCKING,
189 	MV88E61XX_PORTSTT_LEARNING,
190 	MV88E61XX_PORTSTT_FORWARDING
191 };
192 
193 struct mv88e61xx_config {
194 	char *name;
195 	enum mv88e61xx_cfg_vlan vlancfg;
196 	enum mv88e61xx_cfg_rgmiid rgmii_delay;
197 	enum mv88e61xx_cfg_prtstt portstate;
198 	enum mv88e61xx_cfg_ledinit led_init;
199 	enum mv88e61xx_cfg_mdip mdip;
200 	u32 ports_enabled;
201 	u8 cpuport;
202 };
203 
204 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
205 #endif /* CONFIG_MV88E61XX_SWITCH */
206 
207 /*
208  * Allow FEC to fine-tune MII configuration on boards which require this.
209  */
210 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
211 
212 #endif /* _NETDEV_H_ */
213