1 /* 2 * (C) Copyright 2008 3 * Benjamin Warren, biggerbadderben@gmail.com 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * netdev.h - definitions an prototypes for network devices 26 */ 27 28 #ifndef _NETDEV_H_ 29 #define _NETDEV_H_ 30 31 /* 32 * Board and CPU-specific initialization functions 33 * board_eth_init() has highest priority. cpu_eth_init() only 34 * gets called if board_eth_init() isn't instantiated or fails. 35 * Return values: 36 * 0: success 37 * -1: failure 38 */ 39 40 int board_eth_init(bd_t *bis); 41 int cpu_eth_init(bd_t *bis); 42 43 /* Driver initialization prototypes */ 44 int altera_tse_initialize(u8 dev_num, int mac_base, 45 int sgdma_rx_base, int sgdma_tx_base); 46 int ax88180_initialize(bd_t *bis); 47 int au1x00_enet_initialize(bd_t*); 48 int at91emac_register(bd_t *bis, unsigned long iobase); 49 int bfin_EMAC_initialize(bd_t *bis); 50 int cs8900_initialize(u8 dev_num, int base_addr); 51 int dc21x4x_initialize(bd_t *bis); 52 int davinci_emac_initialize(void); 53 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); 54 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); 55 int e1000_initialize(bd_t *bis); 56 int eepro100_initialize(bd_t *bis); 57 int enc28j60_initialize(unsigned int bus, unsigned int cs, 58 unsigned int max_hz, unsigned int mode); 59 int ep93xx_eth_initialize(u8 dev_num, int base_addr); 60 int ethoc_initialize(u8 dev_num, int base_addr); 61 int eth_3com_initialize (bd_t * bis); 62 int fec_initialize (bd_t *bis); 63 int fecmxc_initialize (bd_t *bis); 64 int ftgmac100_initialize(bd_t *bits); 65 int ftmac100_initialize(bd_t *bits); 66 int greth_initialize(bd_t *bis); 67 void gt6426x_eth_initialize(bd_t *bis); 68 int inca_switch_initialize(bd_t *bis); 69 int lan91c96_initialize(u8 dev_num, int base_addr); 70 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); 71 int mcdmafec_initialize(bd_t *bis); 72 int mcffec_initialize(bd_t *bis); 73 int mpc512x_fec_initialize(bd_t *bis); 74 int mpc5xxx_fec_initialize(bd_t *bis); 75 int mpc8220_fec_initialize(bd_t *bis); 76 int mpc82xx_scc_enet_initialize(bd_t *bis); 77 int mvgbe_initialize(bd_t *bis); 78 int natsemi_initialize(bd_t *bis); 79 int npe_initialize(bd_t *bis); 80 int ns8382x_initialize(bd_t *bis); 81 int pcnet_initialize(bd_t *bis); 82 int plb2800_eth_initialize(bd_t *bis); 83 int ppc_4xx_eth_initialize (bd_t *bis); 84 int rtl8139_initialize(bd_t *bis); 85 int rtl8169_initialize(bd_t *bis); 86 int scc_initialize(bd_t *bis); 87 int skge_initialize(bd_t *bis); 88 int smc911x_initialize(u8 dev_num, int base_addr); 89 int smc91111_initialize(u8 dev_num, int base_addr); 90 int tsi108_eth_initialize(bd_t *bis); 91 int uec_standard_init(bd_t *bis); 92 int uli526x_initialize(bd_t *bis); 93 int xilinx_emaclite_initialize (bd_t *bis, int base_addr); 94 int sh_eth_initialize(bd_t *bis); 95 int dm9000_initialize(bd_t *bis); 96 int fecmxc_initialize(bd_t *bis); 97 98 /* Boards with PCI network controllers can call this from their board_eth_init() 99 * function to initialize whatever's on board. 100 * Return value is total # of devices found */ 101 102 static inline int pci_eth_init(bd_t *bis) 103 { 104 int num = 0; 105 106 #ifdef CONFIG_PCI 107 108 #ifdef CONFIG_EEPRO100 109 num += eepro100_initialize(bis); 110 #endif 111 #ifdef CONFIG_TULIP 112 num += dc21x4x_initialize(bis); 113 #endif 114 #ifdef CONFIG_E1000 115 num += e1000_initialize(bis); 116 #endif 117 #ifdef CONFIG_PCNET 118 num += pcnet_initialize(bis); 119 #endif 120 #ifdef CONFIG_NATSEMI 121 num += natsemi_initialize(bis); 122 #endif 123 #ifdef CONFIG_NS8382X 124 num += ns8382x_initialize(bis); 125 #endif 126 #if defined(CONFIG_RTL8139) 127 num += rtl8139_initialize(bis); 128 #endif 129 #if defined(CONFIG_RTL8169) 130 num += rtl8169_initialize(bis); 131 #endif 132 #if defined(CONFIG_ULI526X) 133 num += uli526x_initialize(bis); 134 #endif 135 136 #endif /* CONFIG_PCI */ 137 return num; 138 } 139 140 /* 141 * Boards with mv88e61xx switch can use this by defining 142 * CONFIG_MV88E61XX_SWITCH in respective board configheader file 143 * the stuct and enums here are used to specify switch configuration params 144 */ 145 #if defined(CONFIG_MV88E61XX_SWITCH) 146 enum mv88e61xx_cfg_vlan { 147 MV88E61XX_VLANCFG_DEFAULT, 148 MV88E61XX_VLANCFG_ROUTER 149 }; 150 151 enum mv88e61xx_cfg_mdip { 152 MV88E61XX_MDIP_NOCHANGE, 153 MV88E61XX_MDIP_REVERSE 154 }; 155 156 enum mv88e61xx_cfg_ledinit { 157 MV88E61XX_LED_INIT_DIS, 158 MV88E61XX_LED_INIT_EN 159 }; 160 161 enum mv88e61xx_cfg_rgmiid { 162 MV88E61XX_RGMII_DELAY_DIS, 163 MV88E61XX_RGMII_DELAY_EN 164 }; 165 166 enum mv88e61xx_cfg_prtstt { 167 MV88E61XX_PORTSTT_DISABLED, 168 MV88E61XX_PORTSTT_BLOCKING, 169 MV88E61XX_PORTSTT_LEARNING, 170 MV88E61XX_PORTSTT_FORWARDING 171 }; 172 173 struct mv88e61xx_config { 174 char *name; 175 enum mv88e61xx_cfg_vlan vlancfg; 176 enum mv88e61xx_cfg_rgmiid rgmii_delay; 177 enum mv88e61xx_cfg_prtstt portstate; 178 enum mv88e61xx_cfg_ledinit led_init; 179 enum mv88e61xx_cfg_mdip mdip; 180 u32 ports_enabled; 181 u8 cpuport; 182 }; 183 184 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); 185 #endif /* CONFIG_MV88E61XX_SWITCH */ 186 187 #endif /* _NETDEV_H_ */ 188