1 /* 2 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 */ 7 8 #ifndef __MTD_ABI_H__ 9 #define __MTD_ABI_H__ 10 11 #ifdef __UBOOT__ 12 #include <linux/compat.h> 13 #endif 14 15 #include <linux/compiler.h> 16 17 struct erase_info_user { 18 __u32 start; 19 __u32 length; 20 }; 21 22 struct erase_info_user64 { 23 __u64 start; 24 __u64 length; 25 }; 26 27 struct mtd_oob_buf { 28 __u32 start; 29 __u32 length; 30 unsigned char __user *ptr; 31 }; 32 33 struct mtd_oob_buf64 { 34 __u64 start; 35 __u32 pad; 36 __u32 length; 37 __u64 usr_ptr; 38 }; 39 40 /** 41 * MTD operation modes 42 * 43 * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) 44 * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas 45 * which are defined by the internal ecclayout 46 * @MTD_OPS_RAW: data are transferred as-is, with no error correction; 47 * this mode implies %MTD_OPS_PLACE_OOB 48 * 49 * These modes can be passed to ioctl(MEMWRITE) and are also used internally. 50 * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. 51 * %MTD_FILE_MODE_RAW. 52 */ 53 enum { 54 MTD_OPS_PLACE_OOB = 0, 55 MTD_OPS_AUTO_OOB = 1, 56 MTD_OPS_RAW = 2, 57 }; 58 59 /** 60 * struct mtd_write_req - data structure for requesting a write operation 61 * 62 * @start: start address 63 * @len: length of data buffer 64 * @ooblen: length of OOB buffer 65 * @usr_data: user-provided data buffer 66 * @usr_oob: user-provided OOB buffer 67 * @mode: MTD mode (see "MTD operation modes") 68 * @padding: reserved, must be set to 0 69 * 70 * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB 71 * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to 72 * write data-only, set @usr_oob == NULL. However, setting both @usr_data and 73 * @usr_oob to NULL is not allowed. 74 */ 75 struct mtd_write_req { 76 __u64 start; 77 __u64 len; 78 __u64 ooblen; 79 __u64 usr_data; 80 __u64 usr_oob; 81 __u8 mode; 82 __u8 padding[7]; 83 }; 84 85 #define MTD_ABSENT 0 86 #define MTD_RAM 1 87 #define MTD_ROM 2 88 #define MTD_NORFLASH 3 89 #define MTD_NANDFLASH 4 /* SLC NAND */ 90 #define MTD_DATAFLASH 6 91 #define MTD_UBIVOLUME 7 92 #define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */ 93 94 #define MTD_WRITEABLE 0x400 /* Device is writeable */ 95 #define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ 96 #define MTD_NO_ERASE 0x1000 /* No erase necessary */ 97 #define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */ 98 99 /* Some common devices / combinations of capabilities */ 100 #define MTD_CAP_ROM 0 101 #define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) 102 #define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE) 103 #define MTD_CAP_NANDFLASH (MTD_WRITEABLE) 104 105 /* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */ 106 #define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) 107 #define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) 108 #define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme 109 #define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) 110 #define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default 111 112 /* OTP mode selection */ 113 #define MTD_OTP_OFF 0 114 #define MTD_OTP_FACTORY 1 115 #define MTD_OTP_USER 2 116 117 struct mtd_info_user { 118 __u8 type; 119 __u32 flags; 120 __u32 size; /* Total size of the MTD */ 121 __u32 erasesize; 122 __u32 writesize; 123 __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */ 124 __u64 padding; /* Old obsolete field; do not use */ 125 }; 126 127 struct region_info_user { 128 __u32 offset; /* At which this region starts, 129 * from the beginning of the MTD */ 130 __u32 erasesize; /* For this region */ 131 __u32 numblocks; /* Number of blocks in this region */ 132 __u32 regionindex; 133 }; 134 135 struct otp_info { 136 __u32 start; 137 __u32 length; 138 __u32 locked; 139 }; 140 141 /* 142 * Note, the following ioctl existed in the past and was removed: 143 * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) 144 * Try to avoid adding a new ioctl with the same ioctl number. 145 */ 146 147 /* Get basic MTD characteristics info (better to use sysfs) */ 148 #define MEMGETINFO _IOR('M', 1, struct mtd_info_user) 149 /* Erase segment of MTD */ 150 #define MEMERASE _IOW('M', 2, struct erase_info_user) 151 /* Write out-of-band data from MTD */ 152 #define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) 153 /* Read out-of-band data from MTD */ 154 #define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) 155 /* Lock a chip (for MTD that supports it) */ 156 #define MEMLOCK _IOW('M', 5, struct erase_info_user) 157 /* Unlock a chip (for MTD that supports it) */ 158 #define MEMUNLOCK _IOW('M', 6, struct erase_info_user) 159 /* Get the number of different erase regions */ 160 #define MEMGETREGIONCOUNT _IOR('M', 7, int) 161 /* Get information about the erase region for a specific index */ 162 #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) 163 /* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ 164 #define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) 165 /* Check if an eraseblock is bad */ 166 #define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t) 167 /* Mark an eraseblock as bad */ 168 #define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t) 169 /* Set OTP (One-Time Programmable) mode (factory vs. user) */ 170 #define OTPSELECT _IOR('M', 13, int) 171 /* Get number of OTP (One-Time Programmable) regions */ 172 #define OTPGETREGIONCOUNT _IOW('M', 14, int) 173 /* Get all OTP (One-Time Programmable) info about MTD */ 174 #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) 175 /* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ 176 #define OTPLOCK _IOR('M', 16, struct otp_info) 177 /* Get ECC layout (deprecated) */ 178 #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user) 179 /* Get statistics about corrected/uncorrected errors */ 180 #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) 181 /* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ 182 #define MTDFILEMODE _IO('M', 19) 183 /* Erase segment of MTD (supports 64-bit address) */ 184 #define MEMERASE64 _IOW('M', 20, struct erase_info_user64) 185 /* Write data to OOB (64-bit version) */ 186 #define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64) 187 /* Read data from OOB (64-bit version) */ 188 #define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64) 189 /* Check if chip is locked (for MTD that supports it) */ 190 #define MEMISLOCKED _IOR('M', 23, struct erase_info_user) 191 /* 192 * Most generic write interface; can write in-band and/or out-of-band in various 193 * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes 194 * without OOB, e.g., NOR flash. 195 */ 196 #define MEMWRITE _IOWR('M', 24, struct mtd_write_req) 197 198 /* 199 * Obsolete legacy interface. Keep it in order not to break userspace 200 * interfaces 201 */ 202 struct nand_oobinfo { 203 __u32 useecc; 204 __u32 eccbytes; 205 __u32 oobfree[8][2]; 206 __u32 eccpos[32]; 207 }; 208 209 struct nand_oobfree { 210 __u32 offset; 211 __u32 length; 212 }; 213 214 #define MTD_MAX_OOBFREE_ENTRIES 8 215 #define MTD_MAX_ECCPOS_ENTRIES 64 216 /* 217 * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl 218 * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a 219 * complete set of ECC information. The ioctl truncates the larger internal 220 * structure to retain binary compatibility with the static declaration of the 221 * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of 222 * the user struct, not the MAX size of the internal struct nand_ecclayout. 223 */ 224 struct nand_ecclayout_user { 225 __u32 eccbytes; 226 __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES]; 227 __u32 oobavail; 228 struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; 229 }; 230 231 /** 232 * struct mtd_ecc_stats - error correction stats 233 * 234 * @corrected: number of corrected bits 235 * @failed: number of uncorrectable errors 236 * @badblocks: number of bad blocks in this partition 237 * @bbtblocks: number of blocks reserved for bad block tables 238 */ 239 struct mtd_ecc_stats { 240 __u32 corrected; 241 __u32 failed; 242 __u32 badblocks; 243 __u32 bbtblocks; 244 }; 245 246 /* 247 * MTD file modes - for read/write access to MTD 248 * 249 * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled 250 * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode 251 * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode 252 * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled 253 * 254 * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained 255 * separately for each open file descriptor. 256 * 257 * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - 258 * raw access to the flash, without error correction or autoplacement schemes. 259 * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode 260 * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is 261 * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). 262 */ 263 enum mtd_file_modes { 264 MTD_FILE_MODE_NORMAL = MTD_OTP_OFF, 265 MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY, 266 MTD_FILE_MODE_OTP_USER = MTD_OTP_USER, 267 MTD_FILE_MODE_RAW, 268 }; 269 270 static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd) 271 { 272 return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; 273 } 274 275 #endif /* __MTD_ABI_H__ */ 276