1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2008,2010 Freescale Semiconductor, Inc 4 * Andy Fleming 5 * 6 * Based (loosely) on the Linux code 7 */ 8 9 #ifndef _MMC_H_ 10 #define _MMC_H_ 11 12 #include <linux/list.h> 13 #include <linux/sizes.h> 14 #include <linux/compiler.h> 15 #include <part.h> 16 17 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) 18 #define MMC_SUPPORTS_TUNING 19 #endif 20 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 21 #define MMC_SUPPORTS_TUNING 22 #endif 23 24 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ 25 #define SD_VERSION_SD (1U << 31) 26 #define MMC_VERSION_MMC (1U << 30) 27 28 #define MAKE_SDMMC_VERSION(a, b, c) \ 29 ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c)) 30 #define MAKE_SD_VERSION(a, b, c) \ 31 (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c)) 32 #define MAKE_MMC_VERSION(a, b, c) \ 33 (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c)) 34 35 #define EXTRACT_SDMMC_MAJOR_VERSION(x) \ 36 (((u32)(x) >> 16) & 0xff) 37 #define EXTRACT_SDMMC_MINOR_VERSION(x) \ 38 (((u32)(x) >> 8) & 0xff) 39 #define EXTRACT_SDMMC_CHANGE_VERSION(x) \ 40 ((u32)(x) & 0xff) 41 42 #define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0) 43 #define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0) 44 #define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0) 45 #define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0) 46 47 #define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0) 48 #define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0) 49 #define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0) 50 #define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0) 51 #define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0) 52 #define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0) 53 #define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0) 54 #define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0) 55 #define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0) 56 #define MMC_VERSION_4_4 MAKE_MMC_VERSION(4, 4, 0) 57 #define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) 58 #define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) 59 #define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) 60 #define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0) 61 62 #define MMC_CAP(mode) (1 << mode) 63 #define MMC_MODE_HS (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS)) 64 #define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52) 65 #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) 66 #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) 67 #define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) 68 69 #define MMC_MODE_8BIT BIT(30) 70 #define MMC_MODE_4BIT BIT(29) 71 #define MMC_MODE_1BIT BIT(28) 72 #define MMC_MODE_SPI BIT(27) 73 74 75 #define SD_DATA_4BIT 0x00040000 76 77 #define IS_SD(x) ((x)->version & SD_VERSION_SD) 78 #define IS_MMC(x) ((x)->version & MMC_VERSION_MMC) 79 80 #define MMC_DATA_READ 1 81 #define MMC_DATA_WRITE 2 82 83 #define MMC_CMD_GO_IDLE_STATE 0 84 #define MMC_CMD_SEND_OP_COND 1 85 #define MMC_CMD_ALL_SEND_CID 2 86 #define MMC_CMD_SET_RELATIVE_ADDR 3 87 #define MMC_CMD_SET_DSR 4 88 #define MMC_CMD_SWITCH 6 89 #define MMC_CMD_SELECT_CARD 7 90 #define MMC_CMD_SEND_EXT_CSD 8 91 #define MMC_CMD_SEND_CSD 9 92 #define MMC_CMD_SEND_CID 10 93 #define MMC_CMD_STOP_TRANSMISSION 12 94 #define MMC_CMD_SEND_STATUS 13 95 #define MMC_CMD_SET_BLOCKLEN 16 96 #define MMC_CMD_READ_SINGLE_BLOCK 17 97 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 98 #define MMC_CMD_SEND_TUNING_BLOCK 19 99 #define MMC_CMD_SEND_TUNING_BLOCK_HS200 21 100 #define MMC_CMD_SET_BLOCK_COUNT 23 101 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 102 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 103 #define MMC_CMD_ERASE_GROUP_START 35 104 #define MMC_CMD_ERASE_GROUP_END 36 105 #define MMC_CMD_ERASE 38 106 #define MMC_CMD_APP_CMD 55 107 #define MMC_CMD_SPI_READ_OCR 58 108 #define MMC_CMD_SPI_CRC_ON_OFF 59 109 #define MMC_CMD_RES_MAN 62 110 111 #define MMC_CMD62_ARG1 0xefac62ec 112 #define MMC_CMD62_ARG2 0xcbaea7 113 114 115 #define SD_CMD_SEND_RELATIVE_ADDR 3 116 #define SD_CMD_SWITCH_FUNC 6 117 #define SD_CMD_SEND_IF_COND 8 118 #define SD_CMD_SWITCH_UHS18V 11 119 120 #define SD_CMD_APP_SET_BUS_WIDTH 6 121 #define SD_CMD_APP_SD_STATUS 13 122 #define SD_CMD_ERASE_WR_BLK_START 32 123 #define SD_CMD_ERASE_WR_BLK_END 33 124 #define SD_CMD_APP_SEND_OP_COND 41 125 #define SD_CMD_APP_SEND_SCR 51 126 127 static inline bool mmc_is_tuning_cmd(uint cmdidx) 128 { 129 if ((cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) || 130 (cmdidx == MMC_CMD_SEND_TUNING_BLOCK)) 131 return true; 132 return false; 133 } 134 135 /* SCR definitions in different words */ 136 #define SD_HIGHSPEED_BUSY 0x00020000 137 #define SD_HIGHSPEED_SUPPORTED 0x00020000 138 139 #define UHS_SDR12_BUS_SPEED 0 140 #define HIGH_SPEED_BUS_SPEED 1 141 #define UHS_SDR25_BUS_SPEED 1 142 #define UHS_SDR50_BUS_SPEED 2 143 #define UHS_SDR104_BUS_SPEED 3 144 #define UHS_DDR50_BUS_SPEED 4 145 146 #define SD_MODE_UHS_SDR12 BIT(UHS_SDR12_BUS_SPEED) 147 #define SD_MODE_UHS_SDR25 BIT(UHS_SDR25_BUS_SPEED) 148 #define SD_MODE_UHS_SDR50 BIT(UHS_SDR50_BUS_SPEED) 149 #define SD_MODE_UHS_SDR104 BIT(UHS_SDR104_BUS_SPEED) 150 #define SD_MODE_UHS_DDR50 BIT(UHS_DDR50_BUS_SPEED) 151 152 #define OCR_BUSY 0x80000000 153 #define OCR_HCS 0x40000000 154 #define OCR_S18R 0x1000000 155 #define OCR_VOLTAGE_MASK 0x007FFF80 156 #define OCR_ACCESS_MODE 0x60000000 157 158 #define MMC_ERASE_ARG 0x00000000 159 #define MMC_SECURE_ERASE_ARG 0x80000000 160 #define MMC_TRIM_ARG 0x00000001 161 #define MMC_DISCARD_ARG 0x00000003 162 #define MMC_SECURE_TRIM1_ARG 0x80000001 163 #define MMC_SECURE_TRIM2_ARG 0x80008000 164 165 #define MMC_STATUS_MASK (~0x0206BF7F) 166 #define MMC_STATUS_SWITCH_ERROR (1 << 7) 167 #define MMC_STATUS_RDY_FOR_DATA (1 << 8) 168 #define MMC_STATUS_CURR_STATE (0xf << 9) 169 #define MMC_STATUS_ERROR (1 << 19) 170 171 #define MMC_STATE_PRG (7 << 9) 172 173 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ 174 #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ 175 #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ 176 #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ 177 #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ 178 #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ 179 #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ 180 #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ 181 #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ 182 #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ 183 #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ 184 #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ 185 #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ 186 #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ 187 #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ 188 #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ 189 #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ 190 191 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ 192 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte 193 addressed by index which are 194 1 in value field */ 195 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte 196 addressed by index, which are 197 1 in value field */ 198 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ 199 200 #define SD_SWITCH_CHECK 0 201 #define SD_SWITCH_SWITCH 1 202 203 /* 204 * EXT_CSD fields 205 */ 206 #define EXT_CSD_ENH_START_ADDR 136 /* R/W */ 207 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */ 208 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ 209 #define EXT_CSD_PARTITION_SETTING 155 /* R/W */ 210 #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ 211 #define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ 212 #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ 213 #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ 214 #define EXT_CSD_BKOPS_EN 163 /* R/W & R/W/E */ 215 #define EXT_CSD_WR_REL_PARAM 166 /* R */ 216 #define EXT_CSD_WR_REL_SET 167 /* R/W */ 217 #define EXT_CSD_RPMB_MULT 168 /* RO */ 218 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ 219 #define EXT_CSD_BOOT_BUS_WIDTH 177 220 #define EXT_CSD_PART_CONF 179 /* R/W */ 221 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 222 #define EXT_CSD_HS_TIMING 185 /* R/W */ 223 #define EXT_CSD_REV 192 /* RO */ 224 #define EXT_CSD_CARD_TYPE 196 /* RO */ 225 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 226 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 227 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ 228 #define EXT_CSD_BOOT_MULT 226 /* RO */ 229 #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ 230 231 /* 232 * EXT_CSD field definitions 233 */ 234 235 #define EXT_CSD_CMD_SET_NORMAL (1 << 0) 236 #define EXT_CSD_CMD_SET_SECURE (1 << 1) 237 #define EXT_CSD_CMD_SET_CPSECURE (1 << 2) 238 239 #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ 240 #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ 241 #define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) 242 #define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) 243 #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ 244 | EXT_CSD_CARD_TYPE_DDR_1_2V) 245 246 #define EXT_CSD_CARD_TYPE_HS200_1_8V BIT(4) /* Card can run at 200MHz */ 247 /* SDR mode @1.8V I/O */ 248 #define EXT_CSD_CARD_TYPE_HS200_1_2V BIT(5) /* Card can run at 200MHz */ 249 /* SDR mode @1.2V I/O */ 250 #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ 251 EXT_CSD_CARD_TYPE_HS200_1_2V) 252 #define EXT_CSD_CARD_TYPE_HS400_1_8V BIT(6) 253 #define EXT_CSD_CARD_TYPE_HS400_1_2V BIT(7) 254 #define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ 255 EXT_CSD_CARD_TYPE_HS400_1_2V) 256 257 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ 258 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ 259 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ 260 #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ 261 #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ 262 #define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ 263 264 #define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ 265 #define EXT_CSD_TIMING_HS 1 /* HS */ 266 #define EXT_CSD_TIMING_HS200 2 /* HS200 */ 267 #define EXT_CSD_TIMING_HS400 3 /* HS400 */ 268 269 #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) 270 #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) 271 #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) 272 #define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) 273 274 #define EXT_CSD_BOOT_ACK(x) (x << 6) 275 #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) 276 #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) 277 278 #define EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1) 279 #define EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7) 280 #define EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7) 281 282 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) 283 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) 284 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) 285 286 #define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) 287 288 #define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ 289 #define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */ 290 291 #define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ 292 293 #define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ 294 #define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ 295 296 #define R1_ILLEGAL_COMMAND (1 << 22) 297 #define R1_APP_CMD (1 << 5) 298 299 #define MMC_RSP_PRESENT (1 << 0) 300 #define MMC_RSP_136 (1 << 1) /* 136 bit response */ 301 #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ 302 #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ 303 #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ 304 305 #define MMC_RSP_NONE (0) 306 #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 307 #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ 308 MMC_RSP_BUSY) 309 #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) 310 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 311 #define MMC_RSP_R4 (MMC_RSP_PRESENT) 312 #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 313 #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 314 #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 315 316 #define MMCPART_NOAVAILABLE (0xff) 317 #define PART_ACCESS_MASK (0x7) 318 #define PART_SUPPORT (0x1) 319 #define ENHNCD_SUPPORT (0x2) 320 #define PART_ENH_ATTRIB (0x1f) 321 322 #define MMC_QUIRK_RETRY_SEND_CID BIT(0) 323 #define MMC_QUIRK_RETRY_SET_BLOCKLEN BIT(1) 324 325 enum mmc_voltage { 326 MMC_SIGNAL_VOLTAGE_000 = 0, 327 MMC_SIGNAL_VOLTAGE_120 = 1, 328 MMC_SIGNAL_VOLTAGE_180 = 2, 329 MMC_SIGNAL_VOLTAGE_330 = 4, 330 }; 331 332 #define MMC_ALL_SIGNAL_VOLTAGE (MMC_SIGNAL_VOLTAGE_120 |\ 333 MMC_SIGNAL_VOLTAGE_180 |\ 334 MMC_SIGNAL_VOLTAGE_330) 335 336 /* Maximum block size for MMC */ 337 #define MMC_MAX_BLOCK_LEN 512 338 339 /* The number of MMC physical partitions. These consist of: 340 * boot partitions (2), general purpose partitions (4) in MMC v4.4. 341 */ 342 #define MMC_NUM_BOOT_PARTITION 2 343 #define MMC_PART_RPMB 3 /* RPMB partition number */ 344 345 /* Driver model support */ 346 347 /** 348 * struct mmc_uclass_priv - Holds information about a device used by the uclass 349 */ 350 struct mmc_uclass_priv { 351 struct mmc *mmc; 352 }; 353 354 /** 355 * mmc_get_mmc_dev() - get the MMC struct pointer for a device 356 * 357 * Provided that the device is already probed and ready for use, this value 358 * will be available. 359 * 360 * @dev: Device 361 * @return associated mmc struct pointer if available, else NULL 362 */ 363 struct mmc *mmc_get_mmc_dev(struct udevice *dev); 364 365 /* End of driver model support */ 366 367 struct mmc_cid { 368 unsigned long psn; 369 unsigned short oid; 370 unsigned char mid; 371 unsigned char prv; 372 unsigned char mdt; 373 char pnm[7]; 374 }; 375 376 struct mmc_cmd { 377 ushort cmdidx; 378 uint resp_type; 379 uint cmdarg; 380 uint response[4]; 381 }; 382 383 struct mmc_data { 384 union { 385 char *dest; 386 const char *src; /* src buffers don't get written to */ 387 }; 388 uint flags; 389 uint blocks; 390 uint blocksize; 391 }; 392 393 /* forward decl. */ 394 struct mmc; 395 396 #if CONFIG_IS_ENABLED(DM_MMC) 397 struct dm_mmc_ops { 398 /** 399 * send_cmd() - Send a command to the MMC device 400 * 401 * @dev: Device to receive the command 402 * @cmd: Command to send 403 * @data: Additional data to send/receive 404 * @return 0 if OK, -ve on error 405 */ 406 int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd, 407 struct mmc_data *data); 408 409 /** 410 * set_ios() - Set the I/O speed/width for an MMC device 411 * 412 * @dev: Device to update 413 * @return 0 if OK, -ve on error 414 */ 415 int (*set_ios)(struct udevice *dev); 416 417 /** 418 * send_init_stream() - send the initialization stream: 74 clock cycles 419 * This is used after power up before sending the first command 420 * 421 * @dev: Device to update 422 */ 423 void (*send_init_stream)(struct udevice *dev); 424 425 /** 426 * get_cd() - See whether a card is present 427 * 428 * @dev: Device to check 429 * @return 0 if not present, 1 if present, -ve on error 430 */ 431 int (*get_cd)(struct udevice *dev); 432 433 /** 434 * get_wp() - See whether a card has write-protect enabled 435 * 436 * @dev: Device to check 437 * @return 0 if write-enabled, 1 if write-protected, -ve on error 438 */ 439 int (*get_wp)(struct udevice *dev); 440 441 #ifdef MMC_SUPPORTS_TUNING 442 /** 443 * execute_tuning() - Start the tuning process 444 * 445 * @dev: Device to start the tuning 446 * @opcode: Command opcode to send 447 * @return 0 if OK, -ve on error 448 */ 449 int (*execute_tuning)(struct udevice *dev, uint opcode); 450 #endif 451 452 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 453 /** 454 * wait_dat0() - wait until dat0 is in the target state 455 * (CLK must be running during the wait) 456 * 457 * @dev: Device to check 458 * @state: target state 459 * @timeout: timeout in us 460 * @return 0 if dat0 is in the target state, -ve on error 461 */ 462 int (*wait_dat0)(struct udevice *dev, int state, int timeout); 463 #endif 464 }; 465 466 #define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) 467 468 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, 469 struct mmc_data *data); 470 int dm_mmc_set_ios(struct udevice *dev); 471 void dm_mmc_send_init_stream(struct udevice *dev); 472 int dm_mmc_get_cd(struct udevice *dev); 473 int dm_mmc_get_wp(struct udevice *dev); 474 int dm_mmc_execute_tuning(struct udevice *dev, uint opcode); 475 int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout); 476 477 /* Transition functions for compatibility */ 478 int mmc_set_ios(struct mmc *mmc); 479 void mmc_send_init_stream(struct mmc *mmc); 480 int mmc_getcd(struct mmc *mmc); 481 int mmc_getwp(struct mmc *mmc); 482 int mmc_execute_tuning(struct mmc *mmc, uint opcode); 483 int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); 484 485 #else 486 struct mmc_ops { 487 int (*send_cmd)(struct mmc *mmc, 488 struct mmc_cmd *cmd, struct mmc_data *data); 489 int (*set_ios)(struct mmc *mmc); 490 int (*init)(struct mmc *mmc); 491 int (*getcd)(struct mmc *mmc); 492 int (*getwp)(struct mmc *mmc); 493 }; 494 #endif 495 496 struct mmc_config { 497 const char *name; 498 #if !CONFIG_IS_ENABLED(DM_MMC) 499 const struct mmc_ops *ops; 500 #endif 501 uint host_caps; 502 uint voltages; 503 uint f_min; 504 uint f_max; 505 uint b_max; 506 unsigned char part_type; 507 }; 508 509 struct sd_ssr { 510 unsigned int au; /* In sectors */ 511 unsigned int erase_timeout; /* In milliseconds */ 512 unsigned int erase_offset; /* In milliseconds */ 513 }; 514 515 enum bus_mode { 516 MMC_LEGACY, 517 SD_LEGACY, 518 MMC_HS, 519 SD_HS, 520 MMC_HS_52, 521 MMC_DDR_52, 522 UHS_SDR12, 523 UHS_SDR25, 524 UHS_SDR50, 525 UHS_DDR50, 526 UHS_SDR104, 527 MMC_HS_200, 528 MMC_HS_400, 529 MMC_MODES_END 530 }; 531 532 const char *mmc_mode_name(enum bus_mode mode); 533 void mmc_dump_capabilities(const char *text, uint caps); 534 535 static inline bool mmc_is_mode_ddr(enum bus_mode mode) 536 { 537 if (mode == MMC_DDR_52) 538 return true; 539 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 540 else if (mode == UHS_DDR50) 541 return true; 542 #endif 543 #if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) 544 else if (mode == MMC_HS_400) 545 return true; 546 #endif 547 else 548 return false; 549 } 550 551 #define UHS_CAPS (MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) | \ 552 MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_SDR104) | \ 553 MMC_CAP(UHS_DDR50)) 554 555 static inline bool supports_uhs(uint caps) 556 { 557 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 558 return (caps & UHS_CAPS) ? true : false; 559 #else 560 return false; 561 #endif 562 } 563 564 /* 565 * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device 566 * with mmc_get_mmc_dev(). 567 * 568 * TODO struct mmc should be in mmc_private but it's hard to fix right now 569 */ 570 struct mmc { 571 #if !CONFIG_IS_ENABLED(BLK) 572 struct list_head link; 573 #endif 574 const struct mmc_config *cfg; /* provided configuration */ 575 uint version; 576 void *priv; 577 uint has_init; 578 int high_capacity; 579 bool clk_disable; /* true if the clock can be turned off */ 580 uint bus_width; 581 uint clock; 582 enum mmc_voltage signal_voltage; 583 uint card_caps; 584 uint host_caps; 585 uint ocr; 586 uint dsr; 587 uint dsr_imp; 588 uint scr[2]; 589 uint csd[4]; 590 uint cid[4]; 591 ushort rca; 592 u8 part_support; 593 u8 part_attr; 594 u8 wr_rel_set; 595 u8 part_config; 596 uint tran_speed; 597 uint legacy_speed; /* speed for the legacy mode provided by the card */ 598 uint read_bl_len; 599 #if CONFIG_IS_ENABLED(MMC_WRITE) 600 uint write_bl_len; 601 uint erase_grp_size; /* in 512-byte sectors */ 602 #endif 603 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) 604 uint hc_wp_grp_size; /* in 512-byte sectors */ 605 #endif 606 #if CONFIG_IS_ENABLED(MMC_WRITE) 607 struct sd_ssr ssr; /* SD status register */ 608 #endif 609 u64 capacity; 610 u64 capacity_user; 611 u64 capacity_boot; 612 u64 capacity_rpmb; 613 u64 capacity_gp[4]; 614 #ifndef CONFIG_SPL_BUILD 615 u64 enh_user_start; 616 u64 enh_user_size; 617 #endif 618 #if !CONFIG_IS_ENABLED(BLK) 619 struct blk_desc block_dev; 620 #endif 621 char op_cond_pending; /* 1 if we are waiting on an op_cond command */ 622 char init_in_progress; /* 1 if we have done mmc_start_init() */ 623 char preinit; /* start init as early as possible */ 624 int ddr_mode; 625 #if CONFIG_IS_ENABLED(DM_MMC) 626 struct udevice *dev; /* Device for this MMC controller */ 627 #if CONFIG_IS_ENABLED(DM_REGULATOR) 628 struct udevice *vmmc_supply; /* Main voltage regulator (Vcc)*/ 629 struct udevice *vqmmc_supply; /* IO voltage regulator (Vccq)*/ 630 #endif 631 #endif 632 u8 *ext_csd; 633 u32 cardtype; /* cardtype read from the MMC */ 634 enum mmc_voltage current_voltage; 635 enum bus_mode selected_mode; /* mode currently used */ 636 enum bus_mode best_mode; /* best mode is the supported mode with the 637 * highest bandwidth. It may not always be the 638 * operating mode due to limitations when 639 * accessing the boot partitions 640 */ 641 u32 quirks; 642 }; 643 644 struct mmc_hwpart_conf { 645 struct { 646 uint enh_start; /* in 512-byte sectors */ 647 uint enh_size; /* in 512-byte sectors, if 0 no enh area */ 648 unsigned wr_rel_change : 1; 649 unsigned wr_rel_set : 1; 650 } user; 651 struct { 652 uint size; /* in 512-byte sectors */ 653 unsigned enhanced : 1; 654 unsigned wr_rel_change : 1; 655 unsigned wr_rel_set : 1; 656 } gp_part[4]; 657 }; 658 659 enum mmc_hwpart_conf_mode { 660 MMC_HWPART_CONF_CHECK, 661 MMC_HWPART_CONF_SET, 662 MMC_HWPART_CONF_COMPLETE, 663 }; 664 665 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); 666 667 /** 668 * mmc_bind() - Set up a new MMC device ready for probing 669 * 670 * A child block device is bound with the IF_TYPE_MMC interface type. This 671 * allows the device to be used with CONFIG_BLK 672 * 673 * @dev: MMC device to set up 674 * @mmc: MMC struct 675 * @cfg: MMC configuration 676 * @return 0 if OK, -ve on error 677 */ 678 int mmc_bind(struct udevice *dev, struct mmc *mmc, 679 const struct mmc_config *cfg); 680 void mmc_destroy(struct mmc *mmc); 681 682 /** 683 * mmc_unbind() - Unbind a MMC device's child block device 684 * 685 * @dev: MMC device 686 * @return 0 if OK, -ve on error 687 */ 688 int mmc_unbind(struct udevice *dev); 689 int mmc_initialize(bd_t *bis); 690 int mmc_init(struct mmc *mmc); 691 int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error); 692 693 /** 694 * mmc_of_parse() - Parse the device tree to get the capabilities of the host 695 * 696 * @dev: MMC device 697 * @cfg: MMC configuration 698 * @return 0 if OK, -ve on error 699 */ 700 int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg); 701 702 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); 703 704 /** 705 * mmc_voltage_to_mv() - Convert a mmc_voltage in mV 706 * 707 * @voltage: The mmc_voltage to convert 708 * @return the value in mV if OK, -EINVAL on error (invalid mmc_voltage value) 709 */ 710 int mmc_voltage_to_mv(enum mmc_voltage voltage); 711 712 /** 713 * mmc_set_clock() - change the bus clock 714 * @mmc: MMC struct 715 * @clock: bus frequency in Hz 716 * @disable: flag indicating if the clock must on or off 717 * @return 0 if OK, -ve on error 718 */ 719 int mmc_set_clock(struct mmc *mmc, uint clock, bool disable); 720 721 #define MMC_CLK_ENABLE false 722 #define MMC_CLK_DISABLE true 723 724 struct mmc *find_mmc_device(int dev_num); 725 int mmc_set_dev(int dev_num); 726 void print_mmc_devices(char separator); 727 728 /** 729 * get_mmc_num() - get the total MMC device number 730 * 731 * @return 0 if there is no MMC device, else the number of devices 732 */ 733 int get_mmc_num(void); 734 int mmc_switch_part(struct mmc *mmc, unsigned int part_num); 735 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, 736 enum mmc_hwpart_conf_mode mode); 737 738 #if !CONFIG_IS_ENABLED(DM_MMC) 739 int mmc_getcd(struct mmc *mmc); 740 int board_mmc_getcd(struct mmc *mmc); 741 int mmc_getwp(struct mmc *mmc); 742 int board_mmc_getwp(struct mmc *mmc); 743 #endif 744 745 int mmc_set_dsr(struct mmc *mmc, u16 val); 746 /* Function to change the size of boot partition and rpmb partitions */ 747 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, 748 unsigned long rpmbsize); 749 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ 750 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); 751 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ 752 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); 753 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */ 754 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); 755 /* Functions to read / write the RPMB partition */ 756 int mmc_rpmb_set_key(struct mmc *mmc, void *key); 757 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter); 758 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk, 759 unsigned short cnt, unsigned char *key); 760 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, 761 unsigned short cnt, unsigned char *key); 762 763 /** 764 * mmc_rpmb_route_frames() - route RPMB data frames 765 * @mmc Pointer to a MMC device struct 766 * @req Request data frames 767 * @reqlen Length of data frames in bytes 768 * @rsp Supplied buffer for response data frames 769 * @rsplen Length of supplied buffer for response data frames 770 * 771 * The RPMB data frames are routed to/from some external entity, for 772 * example a Trusted Exectuion Environment in an arm TrustZone protected 773 * secure world. It's expected that it's the external entity who is in 774 * control of the RPMB key. 775 * 776 * Returns 0 on success, < 0 on error. 777 */ 778 int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen, 779 void *rsp, unsigned long rsplen); 780 781 #ifdef CONFIG_CMD_BKOPS_ENABLE 782 int mmc_set_bkops_enable(struct mmc *mmc); 783 #endif 784 785 /** 786 * Start device initialization and return immediately; it does not block on 787 * polling OCR (operation condition register) status. Useful for checking 788 * the presence of SD/eMMC when no card detect logic is available. 789 * 790 * @param mmc Pointer to a MMC device struct 791 * @return 0 on success, <0 on error. 792 */ 793 int mmc_get_op_cond(struct mmc *mmc); 794 795 /** 796 * Start device initialization and return immediately; it does not block on 797 * polling OCR (operation condition register) status. Then you should call 798 * mmc_init, which would block on polling OCR status and complete the device 799 * initializatin. 800 * 801 * @param mmc Pointer to a MMC device struct 802 * @return 0 on success, <0 on error. 803 */ 804 int mmc_start_init(struct mmc *mmc); 805 806 /** 807 * Set preinit flag of mmc device. 808 * 809 * This will cause the device to be pre-inited during mmc_initialize(), 810 * which may save boot time if the device is not accessed until later. 811 * Some eMMC devices take 200-300ms to init, but unfortunately they 812 * must be sent a series of commands to even get them to start preparing 813 * for operation. 814 * 815 * @param mmc Pointer to a MMC device struct 816 * @param preinit preinit flag value 817 */ 818 void mmc_set_preinit(struct mmc *mmc, int preinit); 819 820 #ifdef CONFIG_MMC_SPI 821 #define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) 822 #else 823 #define mmc_host_is_spi(mmc) 0 824 #endif 825 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); 826 827 void board_mmc_power_init(void); 828 int board_mmc_init(bd_t *bis); 829 int cpu_mmc_init(bd_t *bis); 830 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); 831 # ifdef CONFIG_SYS_MMC_ENV_PART 832 extern uint mmc_get_env_part(struct mmc *mmc); 833 # endif 834 int mmc_get_env_dev(void); 835 836 /* Set block count limit because of 16 bit register limit on some hardware*/ 837 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT 838 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 839 #endif 840 841 /** 842 * mmc_get_blk_desc() - Get the block descriptor for an MMC device 843 * 844 * @mmc: MMC device 845 * @return block device if found, else NULL 846 */ 847 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc); 848 849 #endif /* _MMC_H_ */ 850