xref: /openbmc/u-boot/include/mmc.h (revision 90101386)
1 /*
2  * Copyright 2008,2010 Freescale Semiconductor, Inc
3  * Andy Fleming
4  *
5  * Based (loosely) on the Linux code
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef _MMC_H_
11 #define _MMC_H_
12 
13 #include <linux/list.h>
14 #include <linux/sizes.h>
15 #include <linux/compiler.h>
16 #include <part.h>
17 
18 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
19 #define SD_VERSION_SD	(1U << 31)
20 #define MMC_VERSION_MMC	(1U << 30)
21 
22 #define MAKE_SDMMC_VERSION(a, b, c)	\
23 	((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
24 #define MAKE_SD_VERSION(a, b, c)	\
25 	(SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
26 #define MAKE_MMC_VERSION(a, b, c)	\
27 	(MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
28 
29 #define EXTRACT_SDMMC_MAJOR_VERSION(x)	\
30 	(((u32)(x) >> 16) & 0xff)
31 #define EXTRACT_SDMMC_MINOR_VERSION(x)	\
32 	(((u32)(x) >> 8) & 0xff)
33 #define EXTRACT_SDMMC_CHANGE_VERSION(x)	\
34 	((u32)(x) & 0xff)
35 
36 #define SD_VERSION_3		MAKE_SD_VERSION(3, 0, 0)
37 #define SD_VERSION_2		MAKE_SD_VERSION(2, 0, 0)
38 #define SD_VERSION_1_0		MAKE_SD_VERSION(1, 0, 0)
39 #define SD_VERSION_1_10		MAKE_SD_VERSION(1, 10, 0)
40 
41 #define MMC_VERSION_UNKNOWN	MAKE_MMC_VERSION(0, 0, 0)
42 #define MMC_VERSION_1_2		MAKE_MMC_VERSION(1, 2, 0)
43 #define MMC_VERSION_1_4		MAKE_MMC_VERSION(1, 4, 0)
44 #define MMC_VERSION_2_2		MAKE_MMC_VERSION(2, 2, 0)
45 #define MMC_VERSION_3		MAKE_MMC_VERSION(3, 0, 0)
46 #define MMC_VERSION_4		MAKE_MMC_VERSION(4, 0, 0)
47 #define MMC_VERSION_4_1		MAKE_MMC_VERSION(4, 1, 0)
48 #define MMC_VERSION_4_2		MAKE_MMC_VERSION(4, 2, 0)
49 #define MMC_VERSION_4_3		MAKE_MMC_VERSION(4, 3, 0)
50 #define MMC_VERSION_4_41	MAKE_MMC_VERSION(4, 4, 1)
51 #define MMC_VERSION_4_5		MAKE_MMC_VERSION(4, 5, 0)
52 #define MMC_VERSION_5_0		MAKE_MMC_VERSION(5, 0, 0)
53 #define MMC_VERSION_5_1		MAKE_MMC_VERSION(5, 1, 0)
54 
55 #define MMC_MODE_HS		(1 << 0)
56 #define MMC_MODE_HS_52MHz	(1 << 1)
57 #define MMC_MODE_4BIT		(1 << 2)
58 #define MMC_MODE_8BIT		(1 << 3)
59 #define MMC_MODE_SPI		(1 << 4)
60 #define MMC_MODE_DDR_52MHz	(1 << 5)
61 
62 #define SD_DATA_4BIT	0x00040000
63 
64 #define IS_SD(x)	((x)->version & SD_VERSION_SD)
65 #define IS_MMC(x)	((x)->version & MMC_VERSION_MMC)
66 
67 #define MMC_DATA_READ		1
68 #define MMC_DATA_WRITE		2
69 
70 #define MMC_CMD_GO_IDLE_STATE		0
71 #define MMC_CMD_SEND_OP_COND		1
72 #define MMC_CMD_ALL_SEND_CID		2
73 #define MMC_CMD_SET_RELATIVE_ADDR	3
74 #define MMC_CMD_SET_DSR			4
75 #define MMC_CMD_SWITCH			6
76 #define MMC_CMD_SELECT_CARD		7
77 #define MMC_CMD_SEND_EXT_CSD		8
78 #define MMC_CMD_SEND_CSD		9
79 #define MMC_CMD_SEND_CID		10
80 #define MMC_CMD_STOP_TRANSMISSION	12
81 #define MMC_CMD_SEND_STATUS		13
82 #define MMC_CMD_SET_BLOCKLEN		16
83 #define MMC_CMD_READ_SINGLE_BLOCK	17
84 #define MMC_CMD_READ_MULTIPLE_BLOCK	18
85 #define MMC_CMD_SET_BLOCK_COUNT         23
86 #define MMC_CMD_WRITE_SINGLE_BLOCK	24
87 #define MMC_CMD_WRITE_MULTIPLE_BLOCK	25
88 #define MMC_CMD_ERASE_GROUP_START	35
89 #define MMC_CMD_ERASE_GROUP_END		36
90 #define MMC_CMD_ERASE			38
91 #define MMC_CMD_APP_CMD			55
92 #define MMC_CMD_SPI_READ_OCR		58
93 #define MMC_CMD_SPI_CRC_ON_OFF		59
94 #define MMC_CMD_RES_MAN			62
95 
96 #define MMC_CMD62_ARG1			0xefac62ec
97 #define MMC_CMD62_ARG2			0xcbaea7
98 
99 
100 #define SD_CMD_SEND_RELATIVE_ADDR	3
101 #define SD_CMD_SWITCH_FUNC		6
102 #define SD_CMD_SEND_IF_COND		8
103 #define SD_CMD_SWITCH_UHS18V		11
104 
105 #define SD_CMD_APP_SET_BUS_WIDTH	6
106 #define SD_CMD_APP_SD_STATUS		13
107 #define SD_CMD_ERASE_WR_BLK_START	32
108 #define SD_CMD_ERASE_WR_BLK_END		33
109 #define SD_CMD_APP_SEND_OP_COND		41
110 #define SD_CMD_APP_SEND_SCR		51
111 
112 /* SCR definitions in different words */
113 #define SD_HIGHSPEED_BUSY	0x00020000
114 #define SD_HIGHSPEED_SUPPORTED	0x00020000
115 
116 #define OCR_BUSY		0x80000000
117 #define OCR_HCS			0x40000000
118 #define OCR_VOLTAGE_MASK	0x007FFF80
119 #define OCR_ACCESS_MODE		0x60000000
120 
121 #define MMC_ERASE_ARG		0x00000000
122 #define MMC_SECURE_ERASE_ARG	0x80000000
123 #define MMC_TRIM_ARG		0x00000001
124 #define MMC_DISCARD_ARG		0x00000003
125 #define MMC_SECURE_TRIM1_ARG	0x80000001
126 #define MMC_SECURE_TRIM2_ARG	0x80008000
127 
128 #define MMC_STATUS_MASK		(~0x0206BF7F)
129 #define MMC_STATUS_SWITCH_ERROR	(1 << 7)
130 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
131 #define MMC_STATUS_CURR_STATE	(0xf << 9)
132 #define MMC_STATUS_ERROR	(1 << 19)
133 
134 #define MMC_STATE_PRG		(7 << 9)
135 
136 #define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
137 #define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
138 #define MMC_VDD_21_22		0x00000200	/* VDD voltage 2.1 ~ 2.2 */
139 #define MMC_VDD_22_23		0x00000400	/* VDD voltage 2.2 ~ 2.3 */
140 #define MMC_VDD_23_24		0x00000800	/* VDD voltage 2.3 ~ 2.4 */
141 #define MMC_VDD_24_25		0x00001000	/* VDD voltage 2.4 ~ 2.5 */
142 #define MMC_VDD_25_26		0x00002000	/* VDD voltage 2.5 ~ 2.6 */
143 #define MMC_VDD_26_27		0x00004000	/* VDD voltage 2.6 ~ 2.7 */
144 #define MMC_VDD_27_28		0x00008000	/* VDD voltage 2.7 ~ 2.8 */
145 #define MMC_VDD_28_29		0x00010000	/* VDD voltage 2.8 ~ 2.9 */
146 #define MMC_VDD_29_30		0x00020000	/* VDD voltage 2.9 ~ 3.0 */
147 #define MMC_VDD_30_31		0x00040000	/* VDD voltage 3.0 ~ 3.1 */
148 #define MMC_VDD_31_32		0x00080000	/* VDD voltage 3.1 ~ 3.2 */
149 #define MMC_VDD_32_33		0x00100000	/* VDD voltage 3.2 ~ 3.3 */
150 #define MMC_VDD_33_34		0x00200000	/* VDD voltage 3.3 ~ 3.4 */
151 #define MMC_VDD_34_35		0x00400000	/* VDD voltage 3.4 ~ 3.5 */
152 #define MMC_VDD_35_36		0x00800000	/* VDD voltage 3.5 ~ 3.6 */
153 
154 #define MMC_SWITCH_MODE_CMD_SET		0x00 /* Change the command set */
155 #define MMC_SWITCH_MODE_SET_BITS	0x01 /* Set bits in EXT_CSD byte
156 						addressed by index which are
157 						1 in value field */
158 #define MMC_SWITCH_MODE_CLEAR_BITS	0x02 /* Clear bits in EXT_CSD byte
159 						addressed by index, which are
160 						1 in value field */
161 #define MMC_SWITCH_MODE_WRITE_BYTE	0x03 /* Set target byte to value */
162 
163 #define SD_SWITCH_CHECK		0
164 #define SD_SWITCH_SWITCH	1
165 
166 /*
167  * EXT_CSD fields
168  */
169 #define EXT_CSD_ENH_START_ADDR		136	/* R/W */
170 #define EXT_CSD_ENH_SIZE_MULT		140	/* R/W */
171 #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
172 #define EXT_CSD_PARTITION_SETTING	155	/* R/W */
173 #define EXT_CSD_PARTITIONS_ATTRIBUTE	156	/* R/W */
174 #define EXT_CSD_MAX_ENH_SIZE_MULT	157	/* R */
175 #define EXT_CSD_PARTITIONING_SUPPORT	160	/* RO */
176 #define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
177 #define EXT_CSD_BKOPS_EN		163	/* R/W & R/W/E */
178 #define EXT_CSD_WR_REL_PARAM		166	/* R */
179 #define EXT_CSD_WR_REL_SET		167	/* R/W */
180 #define EXT_CSD_RPMB_MULT		168	/* RO */
181 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
182 #define EXT_CSD_BOOT_BUS_WIDTH		177
183 #define EXT_CSD_PART_CONF		179	/* R/W */
184 #define EXT_CSD_BUS_WIDTH		183	/* R/W */
185 #define EXT_CSD_HS_TIMING		185	/* R/W */
186 #define EXT_CSD_REV			192	/* RO */
187 #define EXT_CSD_CARD_TYPE		196	/* RO */
188 #define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
189 #define EXT_CSD_HC_WP_GRP_SIZE		221	/* RO */
190 #define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
191 #define EXT_CSD_BOOT_MULT		226	/* RO */
192 #define EXT_CSD_BKOPS_SUPPORT		502	/* RO */
193 
194 /*
195  * EXT_CSD field definitions
196  */
197 
198 #define EXT_CSD_CMD_SET_NORMAL		(1 << 0)
199 #define EXT_CSD_CMD_SET_SECURE		(1 << 1)
200 #define EXT_CSD_CMD_SET_CPSECURE	(1 << 2)
201 
202 #define EXT_CSD_CARD_TYPE_26	(1 << 0)	/* Card can run at 26MHz */
203 #define EXT_CSD_CARD_TYPE_52	(1 << 1)	/* Card can run at 52MHz */
204 #define EXT_CSD_CARD_TYPE_DDR_1_8V	(1 << 2)
205 #define EXT_CSD_CARD_TYPE_DDR_1_2V	(1 << 3)
206 #define EXT_CSD_CARD_TYPE_DDR_52	(EXT_CSD_CARD_TYPE_DDR_1_8V \
207 					| EXT_CSD_CARD_TYPE_DDR_1_2V)
208 
209 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
210 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
211 #define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
212 #define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
213 #define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
214 
215 #define EXT_CSD_BOOT_ACK_ENABLE			(1 << 6)
216 #define EXT_CSD_BOOT_PARTITION_ENABLE		(1 << 3)
217 #define EXT_CSD_PARTITION_ACCESS_ENABLE		(1 << 0)
218 #define EXT_CSD_PARTITION_ACCESS_DISABLE	(0 << 0)
219 
220 #define EXT_CSD_BOOT_ACK(x)		(x << 6)
221 #define EXT_CSD_BOOT_PART_NUM(x)	(x << 3)
222 #define EXT_CSD_PARTITION_ACCESS(x)	(x << 0)
223 
224 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x)	(x << 3)
225 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x)	(x << 2)
226 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x)	(x)
227 
228 #define EXT_CSD_PARTITION_SETTING_COMPLETED	(1 << 0)
229 
230 #define EXT_CSD_ENH_USR		(1 << 0)	/* user data area is enhanced */
231 #define EXT_CSD_ENH_GP(x)	(1 << ((x)+1))	/* GP part (x+1) is enhanced */
232 
233 #define EXT_CSD_HS_CTRL_REL	(1 << 0)	/* host controlled WR_REL_SET */
234 
235 #define EXT_CSD_WR_DATA_REL_USR		(1 << 0)	/* user data area WR_REL */
236 #define EXT_CSD_WR_DATA_REL_GP(x)	(1 << ((x)+1))	/* GP part (x+1) WR_REL */
237 
238 #define R1_ILLEGAL_COMMAND		(1 << 22)
239 #define R1_APP_CMD			(1 << 5)
240 
241 #define MMC_RSP_PRESENT (1 << 0)
242 #define MMC_RSP_136	(1 << 1)		/* 136 bit response */
243 #define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
244 #define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
245 #define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
246 
247 #define MMC_RSP_NONE	(0)
248 #define MMC_RSP_R1	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
249 #define MMC_RSP_R1b	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
250 			MMC_RSP_BUSY)
251 #define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
252 #define MMC_RSP_R3	(MMC_RSP_PRESENT)
253 #define MMC_RSP_R4	(MMC_RSP_PRESENT)
254 #define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
255 #define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
256 #define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
257 
258 #define MMCPART_NOAVAILABLE	(0xff)
259 #define PART_ACCESS_MASK	(0x7)
260 #define PART_SUPPORT		(0x1)
261 #define ENHNCD_SUPPORT		(0x2)
262 #define PART_ENH_ATTRIB		(0x1f)
263 
264 /* Maximum block size for MMC */
265 #define MMC_MAX_BLOCK_LEN	512
266 
267 /* The number of MMC physical partitions.  These consist of:
268  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
269  */
270 #define MMC_NUM_BOOT_PARTITION	2
271 #define MMC_PART_RPMB           3       /* RPMB partition number */
272 
273 /* Driver model support */
274 
275 /**
276  * struct mmc_uclass_priv - Holds information about a device used by the uclass
277  */
278 struct mmc_uclass_priv {
279 	struct mmc *mmc;
280 };
281 
282 /**
283  * mmc_get_mmc_dev() - get the MMC struct pointer for a device
284  *
285  * Provided that the device is already probed and ready for use, this value
286  * will be available.
287  *
288  * @dev:	Device
289  * @return associated mmc struct pointer if available, else NULL
290  */
291 struct mmc *mmc_get_mmc_dev(struct udevice *dev);
292 
293 /* End of driver model support */
294 
295 struct mmc_cid {
296 	unsigned long psn;
297 	unsigned short oid;
298 	unsigned char mid;
299 	unsigned char prv;
300 	unsigned char mdt;
301 	char pnm[7];
302 };
303 
304 struct mmc_cmd {
305 	ushort cmdidx;
306 	uint resp_type;
307 	uint cmdarg;
308 	uint response[4];
309 };
310 
311 struct mmc_data {
312 	union {
313 		char *dest;
314 		const char *src; /* src buffers don't get written to */
315 	};
316 	uint flags;
317 	uint blocks;
318 	uint blocksize;
319 };
320 
321 /* forward decl. */
322 struct mmc;
323 
324 #ifdef CONFIG_DM_MMC_OPS
325 struct dm_mmc_ops {
326 	/**
327 	 * send_cmd() - Send a command to the MMC device
328 	 *
329 	 * @dev:	Device to receive the command
330 	 * @cmd:	Command to send
331 	 * @data:	Additional data to send/receive
332 	 * @return 0 if OK, -ve on error
333 	 */
334 	int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd,
335 			struct mmc_data *data);
336 
337 	/**
338 	 * set_ios() - Set the I/O speed/width for an MMC device
339 	 *
340 	 * @dev:	Device to update
341 	 * @return 0 if OK, -ve on error
342 	 */
343 	int (*set_ios)(struct udevice *dev);
344 
345 	/**
346 	 * get_cd() - See whether a card is present
347 	 *
348 	 * @dev:	Device to check
349 	 * @return 0 if not present, 1 if present, -ve on error
350 	 */
351 	int (*get_cd)(struct udevice *dev);
352 
353 	/**
354 	 * get_wp() - See whether a card has write-protect enabled
355 	 *
356 	 * @dev:	Device to check
357 	 * @return 0 if write-enabled, 1 if write-protected, -ve on error
358 	 */
359 	int (*get_wp)(struct udevice *dev);
360 };
361 
362 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
363 
364 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
365 		    struct mmc_data *data);
366 int dm_mmc_set_ios(struct udevice *dev);
367 int dm_mmc_get_cd(struct udevice *dev);
368 int dm_mmc_get_wp(struct udevice *dev);
369 
370 /* Transition functions for compatibility */
371 int mmc_set_ios(struct mmc *mmc);
372 int mmc_getcd(struct mmc *mmc);
373 int mmc_getwp(struct mmc *mmc);
374 
375 #else
376 struct mmc_ops {
377 	int (*send_cmd)(struct mmc *mmc,
378 			struct mmc_cmd *cmd, struct mmc_data *data);
379 	void (*set_ios)(struct mmc *mmc);
380 	int (*init)(struct mmc *mmc);
381 	int (*getcd)(struct mmc *mmc);
382 	int (*getwp)(struct mmc *mmc);
383 };
384 #endif
385 
386 struct mmc_config {
387 	const char *name;
388 #ifndef CONFIG_DM_MMC_OPS
389 	const struct mmc_ops *ops;
390 #endif
391 	uint host_caps;
392 	uint voltages;
393 	uint f_min;
394 	uint f_max;
395 	uint b_max;
396 	unsigned char part_type;
397 };
398 
399 struct sd_ssr {
400 	unsigned int au;		/* In sectors */
401 	unsigned int erase_timeout;	/* In milliseconds */
402 	unsigned int erase_offset;	/* In milliseconds */
403 };
404 
405 /*
406  * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
407  * with mmc_get_mmc_dev().
408  *
409  * TODO struct mmc should be in mmc_private but it's hard to fix right now
410  */
411 struct mmc {
412 #ifndef CONFIG_BLK
413 	struct list_head link;
414 #endif
415 	const struct mmc_config *cfg;	/* provided configuration */
416 	uint version;
417 	void *priv;
418 	uint has_init;
419 	int high_capacity;
420 	uint bus_width;
421 	uint clock;
422 	uint card_caps;
423 	uint ocr;
424 	uint dsr;
425 	uint dsr_imp;
426 	uint scr[2];
427 	uint csd[4];
428 	uint cid[4];
429 	ushort rca;
430 	u8 part_support;
431 	u8 part_attr;
432 	u8 wr_rel_set;
433 	char part_config;
434 	uint tran_speed;
435 	uint read_bl_len;
436 	uint write_bl_len;
437 	uint erase_grp_size;	/* in 512-byte sectors */
438 	uint hc_wp_grp_size;	/* in 512-byte sectors */
439 	struct sd_ssr	ssr;	/* SD status register */
440 	u64 capacity;
441 	u64 capacity_user;
442 	u64 capacity_boot;
443 	u64 capacity_rpmb;
444 	u64 capacity_gp[4];
445 	u64 enh_user_start;
446 	u64 enh_user_size;
447 #ifndef CONFIG_BLK
448 	struct blk_desc block_dev;
449 #endif
450 	char op_cond_pending;	/* 1 if we are waiting on an op_cond command */
451 	char init_in_progress;	/* 1 if we have done mmc_start_init() */
452 	char preinit;		/* start init as early as possible */
453 	int ddr_mode;
454 #ifdef CONFIG_DM_MMC
455 	struct udevice *dev;	/* Device for this MMC controller */
456 #endif
457 };
458 
459 struct mmc_hwpart_conf {
460 	struct {
461 		uint enh_start;	/* in 512-byte sectors */
462 		uint enh_size;	/* in 512-byte sectors, if 0 no enh area */
463 		unsigned wr_rel_change : 1;
464 		unsigned wr_rel_set : 1;
465 	} user;
466 	struct {
467 		uint size;	/* in 512-byte sectors */
468 		unsigned enhanced : 1;
469 		unsigned wr_rel_change : 1;
470 		unsigned wr_rel_set : 1;
471 	} gp_part[4];
472 };
473 
474 enum mmc_hwpart_conf_mode {
475 	MMC_HWPART_CONF_CHECK,
476 	MMC_HWPART_CONF_SET,
477 	MMC_HWPART_CONF_COMPLETE,
478 };
479 
480 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv);
481 
482 /**
483  * mmc_bind() - Set up a new MMC device ready for probing
484  *
485  * A child block device is bound with the IF_TYPE_MMC interface type. This
486  * allows the device to be used with CONFIG_BLK
487  *
488  * @dev:	MMC device to set up
489  * @mmc:	MMC struct
490  * @cfg:	MMC configuration
491  * @return 0 if OK, -ve on error
492  */
493 int mmc_bind(struct udevice *dev, struct mmc *mmc,
494 	     const struct mmc_config *cfg);
495 void mmc_destroy(struct mmc *mmc);
496 
497 /**
498  * mmc_unbind() - Unbind a MMC device's child block device
499  *
500  * @dev:	MMC device
501  * @return 0 if OK, -ve on error
502  */
503 int mmc_unbind(struct udevice *dev);
504 int mmc_initialize(bd_t *bis);
505 int mmc_init(struct mmc *mmc);
506 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
507 void mmc_set_clock(struct mmc *mmc, uint clock);
508 struct mmc *find_mmc_device(int dev_num);
509 int mmc_set_dev(int dev_num);
510 void print_mmc_devices(char separator);
511 
512 /**
513  * get_mmc_num() - get the total MMC device number
514  *
515  * @return 0 if there is no MMC device, else the number of devices
516  */
517 int get_mmc_num(void);
518 int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
519 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
520 		      enum mmc_hwpart_conf_mode mode);
521 
522 #ifndef CONFIG_DM_MMC_OPS
523 int mmc_getcd(struct mmc *mmc);
524 int board_mmc_getcd(struct mmc *mmc);
525 int mmc_getwp(struct mmc *mmc);
526 int board_mmc_getwp(struct mmc *mmc);
527 #endif
528 
529 int mmc_set_dsr(struct mmc *mmc, u16 val);
530 /* Function to change the size of boot partition and rpmb partitions */
531 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
532 					unsigned long rpmbsize);
533 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */
534 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
535 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
536 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
537 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
538 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
539 /* Functions to read / write the RPMB partition */
540 int mmc_rpmb_set_key(struct mmc *mmc, void *key);
541 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
542 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
543 		  unsigned short cnt, unsigned char *key);
544 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
545 		   unsigned short cnt, unsigned char *key);
546 #ifdef CONFIG_CMD_BKOPS_ENABLE
547 int mmc_set_bkops_enable(struct mmc *mmc);
548 #endif
549 
550 /**
551  * Start device initialization and return immediately; it does not block on
552  * polling OCR (operation condition register) status.  Then you should call
553  * mmc_init, which would block on polling OCR status and complete the device
554  * initializatin.
555  *
556  * @param mmc	Pointer to a MMC device struct
557  * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
558  */
559 int mmc_start_init(struct mmc *mmc);
560 
561 /**
562  * Set preinit flag of mmc device.
563  *
564  * This will cause the device to be pre-inited during mmc_initialize(),
565  * which may save boot time if the device is not accessed until later.
566  * Some eMMC devices take 200-300ms to init, but unfortunately they
567  * must be sent a series of commands to even get them to start preparing
568  * for operation.
569  *
570  * @param mmc		Pointer to a MMC device struct
571  * @param preinit	preinit flag value
572  */
573 void mmc_set_preinit(struct mmc *mmc, int preinit);
574 
575 #ifdef CONFIG_MMC_SPI
576 #define mmc_host_is_spi(mmc)	((mmc)->cfg->host_caps & MMC_MODE_SPI)
577 #else
578 #define mmc_host_is_spi(mmc)	0
579 #endif
580 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
581 
582 void board_mmc_power_init(void);
583 int board_mmc_init(bd_t *bis);
584 int cpu_mmc_init(bd_t *bis);
585 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
586 int mmc_get_env_dev(void);
587 
588 struct pci_device_id;
589 
590 /**
591  * pci_mmc_init() - set up PCI MMC devices
592  *
593  * This finds all the matching PCI IDs and sets them up as MMC devices.
594  *
595  * @name:		Name to use for devices
596  * @mmc_supported:	PCI IDs to search for, terminated by {0, 0}
597  */
598 int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported);
599 
600 /* Set block count limit because of 16 bit register limit on some hardware*/
601 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
602 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
603 #endif
604 
605 /**
606  * mmc_get_blk_desc() - Get the block descriptor for an MMC device
607  *
608  * @mmc:	MMC device
609  * @return block device if found, else NULL
610  */
611 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc);
612 
613 #endif /* _MMC_H_ */
614