1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2008,2010 Freescale Semiconductor, Inc 4 * Andy Fleming 5 * 6 * Based (loosely) on the Linux code 7 */ 8 9 #ifndef _MMC_H_ 10 #define _MMC_H_ 11 12 #include <linux/list.h> 13 #include <linux/sizes.h> 14 #include <linux/compiler.h> 15 #include <part.h> 16 17 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) 18 #define MMC_SUPPORTS_TUNING 19 #endif 20 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 21 #define MMC_SUPPORTS_TUNING 22 #endif 23 24 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ 25 #define SD_VERSION_SD (1U << 31) 26 #define MMC_VERSION_MMC (1U << 30) 27 28 #define MAKE_SDMMC_VERSION(a, b, c) \ 29 ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c)) 30 #define MAKE_SD_VERSION(a, b, c) \ 31 (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c)) 32 #define MAKE_MMC_VERSION(a, b, c) \ 33 (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c)) 34 35 #define EXTRACT_SDMMC_MAJOR_VERSION(x) \ 36 (((u32)(x) >> 16) & 0xff) 37 #define EXTRACT_SDMMC_MINOR_VERSION(x) \ 38 (((u32)(x) >> 8) & 0xff) 39 #define EXTRACT_SDMMC_CHANGE_VERSION(x) \ 40 ((u32)(x) & 0xff) 41 42 #define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0) 43 #define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0) 44 #define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0) 45 #define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0) 46 47 #define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0) 48 #define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0) 49 #define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0) 50 #define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0) 51 #define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0) 52 #define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0) 53 #define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0) 54 #define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0) 55 #define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0) 56 #define MMC_VERSION_4_4 MAKE_MMC_VERSION(4, 4, 0) 57 #define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) 58 #define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) 59 #define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) 60 #define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0) 61 62 #define MMC_CAP(mode) (1 << mode) 63 #define MMC_MODE_HS (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS)) 64 #define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52) 65 #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) 66 #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) 67 68 #define MMC_MODE_8BIT BIT(30) 69 #define MMC_MODE_4BIT BIT(29) 70 #define MMC_MODE_1BIT BIT(28) 71 #define MMC_MODE_SPI BIT(27) 72 73 74 #define SD_DATA_4BIT 0x00040000 75 76 #define IS_SD(x) ((x)->version & SD_VERSION_SD) 77 #define IS_MMC(x) ((x)->version & MMC_VERSION_MMC) 78 79 #define MMC_DATA_READ 1 80 #define MMC_DATA_WRITE 2 81 82 #define MMC_CMD_GO_IDLE_STATE 0 83 #define MMC_CMD_SEND_OP_COND 1 84 #define MMC_CMD_ALL_SEND_CID 2 85 #define MMC_CMD_SET_RELATIVE_ADDR 3 86 #define MMC_CMD_SET_DSR 4 87 #define MMC_CMD_SWITCH 6 88 #define MMC_CMD_SELECT_CARD 7 89 #define MMC_CMD_SEND_EXT_CSD 8 90 #define MMC_CMD_SEND_CSD 9 91 #define MMC_CMD_SEND_CID 10 92 #define MMC_CMD_STOP_TRANSMISSION 12 93 #define MMC_CMD_SEND_STATUS 13 94 #define MMC_CMD_SET_BLOCKLEN 16 95 #define MMC_CMD_READ_SINGLE_BLOCK 17 96 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 97 #define MMC_CMD_SEND_TUNING_BLOCK 19 98 #define MMC_CMD_SEND_TUNING_BLOCK_HS200 21 99 #define MMC_CMD_SET_BLOCK_COUNT 23 100 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 101 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 102 #define MMC_CMD_ERASE_GROUP_START 35 103 #define MMC_CMD_ERASE_GROUP_END 36 104 #define MMC_CMD_ERASE 38 105 #define MMC_CMD_APP_CMD 55 106 #define MMC_CMD_SPI_READ_OCR 58 107 #define MMC_CMD_SPI_CRC_ON_OFF 59 108 #define MMC_CMD_RES_MAN 62 109 110 #define MMC_CMD62_ARG1 0xefac62ec 111 #define MMC_CMD62_ARG2 0xcbaea7 112 113 114 #define SD_CMD_SEND_RELATIVE_ADDR 3 115 #define SD_CMD_SWITCH_FUNC 6 116 #define SD_CMD_SEND_IF_COND 8 117 #define SD_CMD_SWITCH_UHS18V 11 118 119 #define SD_CMD_APP_SET_BUS_WIDTH 6 120 #define SD_CMD_APP_SD_STATUS 13 121 #define SD_CMD_ERASE_WR_BLK_START 32 122 #define SD_CMD_ERASE_WR_BLK_END 33 123 #define SD_CMD_APP_SEND_OP_COND 41 124 #define SD_CMD_APP_SEND_SCR 51 125 126 static inline bool mmc_is_tuning_cmd(uint cmdidx) 127 { 128 if ((cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) || 129 (cmdidx == MMC_CMD_SEND_TUNING_BLOCK)) 130 return true; 131 return false; 132 } 133 134 /* SCR definitions in different words */ 135 #define SD_HIGHSPEED_BUSY 0x00020000 136 #define SD_HIGHSPEED_SUPPORTED 0x00020000 137 138 #define UHS_SDR12_BUS_SPEED 0 139 #define HIGH_SPEED_BUS_SPEED 1 140 #define UHS_SDR25_BUS_SPEED 1 141 #define UHS_SDR50_BUS_SPEED 2 142 #define UHS_SDR104_BUS_SPEED 3 143 #define UHS_DDR50_BUS_SPEED 4 144 145 #define SD_MODE_UHS_SDR12 BIT(UHS_SDR12_BUS_SPEED) 146 #define SD_MODE_UHS_SDR25 BIT(UHS_SDR25_BUS_SPEED) 147 #define SD_MODE_UHS_SDR50 BIT(UHS_SDR50_BUS_SPEED) 148 #define SD_MODE_UHS_SDR104 BIT(UHS_SDR104_BUS_SPEED) 149 #define SD_MODE_UHS_DDR50 BIT(UHS_DDR50_BUS_SPEED) 150 151 #define OCR_BUSY 0x80000000 152 #define OCR_HCS 0x40000000 153 #define OCR_S18R 0x1000000 154 #define OCR_VOLTAGE_MASK 0x007FFF80 155 #define OCR_ACCESS_MODE 0x60000000 156 157 #define MMC_ERASE_ARG 0x00000000 158 #define MMC_SECURE_ERASE_ARG 0x80000000 159 #define MMC_TRIM_ARG 0x00000001 160 #define MMC_DISCARD_ARG 0x00000003 161 #define MMC_SECURE_TRIM1_ARG 0x80000001 162 #define MMC_SECURE_TRIM2_ARG 0x80008000 163 164 #define MMC_STATUS_MASK (~0x0206BF7F) 165 #define MMC_STATUS_SWITCH_ERROR (1 << 7) 166 #define MMC_STATUS_RDY_FOR_DATA (1 << 8) 167 #define MMC_STATUS_CURR_STATE (0xf << 9) 168 #define MMC_STATUS_ERROR (1 << 19) 169 170 #define MMC_STATE_PRG (7 << 9) 171 172 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ 173 #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ 174 #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ 175 #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ 176 #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ 177 #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ 178 #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ 179 #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ 180 #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ 181 #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ 182 #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ 183 #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ 184 #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ 185 #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ 186 #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ 187 #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ 188 #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ 189 190 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ 191 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte 192 addressed by index which are 193 1 in value field */ 194 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte 195 addressed by index, which are 196 1 in value field */ 197 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ 198 199 #define SD_SWITCH_CHECK 0 200 #define SD_SWITCH_SWITCH 1 201 202 /* 203 * EXT_CSD fields 204 */ 205 #define EXT_CSD_ENH_START_ADDR 136 /* R/W */ 206 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */ 207 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ 208 #define EXT_CSD_PARTITION_SETTING 155 /* R/W */ 209 #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ 210 #define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ 211 #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ 212 #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ 213 #define EXT_CSD_BKOPS_EN 163 /* R/W & R/W/E */ 214 #define EXT_CSD_WR_REL_PARAM 166 /* R */ 215 #define EXT_CSD_WR_REL_SET 167 /* R/W */ 216 #define EXT_CSD_RPMB_MULT 168 /* RO */ 217 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ 218 #define EXT_CSD_BOOT_BUS_WIDTH 177 219 #define EXT_CSD_PART_CONF 179 /* R/W */ 220 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 221 #define EXT_CSD_HS_TIMING 185 /* R/W */ 222 #define EXT_CSD_REV 192 /* RO */ 223 #define EXT_CSD_CARD_TYPE 196 /* RO */ 224 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 225 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 226 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ 227 #define EXT_CSD_BOOT_MULT 226 /* RO */ 228 #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ 229 230 /* 231 * EXT_CSD field definitions 232 */ 233 234 #define EXT_CSD_CMD_SET_NORMAL (1 << 0) 235 #define EXT_CSD_CMD_SET_SECURE (1 << 1) 236 #define EXT_CSD_CMD_SET_CPSECURE (1 << 2) 237 238 #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ 239 #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ 240 #define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) 241 #define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) 242 #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ 243 | EXT_CSD_CARD_TYPE_DDR_1_2V) 244 245 #define EXT_CSD_CARD_TYPE_HS200_1_8V BIT(4) /* Card can run at 200MHz */ 246 /* SDR mode @1.8V I/O */ 247 #define EXT_CSD_CARD_TYPE_HS200_1_2V BIT(5) /* Card can run at 200MHz */ 248 /* SDR mode @1.2V I/O */ 249 #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ 250 EXT_CSD_CARD_TYPE_HS200_1_2V) 251 252 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ 253 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ 254 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ 255 #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ 256 #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ 257 #define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ 258 259 #define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ 260 #define EXT_CSD_TIMING_HS 1 /* HS */ 261 #define EXT_CSD_TIMING_HS200 2 /* HS200 */ 262 263 #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) 264 #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) 265 #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) 266 #define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) 267 268 #define EXT_CSD_BOOT_ACK(x) (x << 6) 269 #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) 270 #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) 271 272 #define EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1) 273 #define EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7) 274 #define EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7) 275 276 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) 277 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) 278 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) 279 280 #define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) 281 282 #define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ 283 #define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */ 284 285 #define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ 286 287 #define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ 288 #define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ 289 290 #define R1_ILLEGAL_COMMAND (1 << 22) 291 #define R1_APP_CMD (1 << 5) 292 293 #define MMC_RSP_PRESENT (1 << 0) 294 #define MMC_RSP_136 (1 << 1) /* 136 bit response */ 295 #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ 296 #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ 297 #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ 298 299 #define MMC_RSP_NONE (0) 300 #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 301 #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ 302 MMC_RSP_BUSY) 303 #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) 304 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 305 #define MMC_RSP_R4 (MMC_RSP_PRESENT) 306 #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 307 #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 308 #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) 309 310 #define MMCPART_NOAVAILABLE (0xff) 311 #define PART_ACCESS_MASK (0x7) 312 #define PART_SUPPORT (0x1) 313 #define ENHNCD_SUPPORT (0x2) 314 #define PART_ENH_ATTRIB (0x1f) 315 316 #define MMC_QUIRK_RETRY_SEND_CID BIT(0) 317 #define MMC_QUIRK_RETRY_SET_BLOCKLEN BIT(1) 318 319 enum mmc_voltage { 320 MMC_SIGNAL_VOLTAGE_000 = 0, 321 MMC_SIGNAL_VOLTAGE_120 = 1, 322 MMC_SIGNAL_VOLTAGE_180 = 2, 323 MMC_SIGNAL_VOLTAGE_330 = 4, 324 }; 325 326 #define MMC_ALL_SIGNAL_VOLTAGE (MMC_SIGNAL_VOLTAGE_120 |\ 327 MMC_SIGNAL_VOLTAGE_180 |\ 328 MMC_SIGNAL_VOLTAGE_330) 329 330 /* Maximum block size for MMC */ 331 #define MMC_MAX_BLOCK_LEN 512 332 333 /* The number of MMC physical partitions. These consist of: 334 * boot partitions (2), general purpose partitions (4) in MMC v4.4. 335 */ 336 #define MMC_NUM_BOOT_PARTITION 2 337 #define MMC_PART_RPMB 3 /* RPMB partition number */ 338 339 /* Driver model support */ 340 341 /** 342 * struct mmc_uclass_priv - Holds information about a device used by the uclass 343 */ 344 struct mmc_uclass_priv { 345 struct mmc *mmc; 346 }; 347 348 /** 349 * mmc_get_mmc_dev() - get the MMC struct pointer for a device 350 * 351 * Provided that the device is already probed and ready for use, this value 352 * will be available. 353 * 354 * @dev: Device 355 * @return associated mmc struct pointer if available, else NULL 356 */ 357 struct mmc *mmc_get_mmc_dev(struct udevice *dev); 358 359 /* End of driver model support */ 360 361 struct mmc_cid { 362 unsigned long psn; 363 unsigned short oid; 364 unsigned char mid; 365 unsigned char prv; 366 unsigned char mdt; 367 char pnm[7]; 368 }; 369 370 struct mmc_cmd { 371 ushort cmdidx; 372 uint resp_type; 373 uint cmdarg; 374 uint response[4]; 375 }; 376 377 struct mmc_data { 378 union { 379 char *dest; 380 const char *src; /* src buffers don't get written to */ 381 }; 382 uint flags; 383 uint blocks; 384 uint blocksize; 385 }; 386 387 /* forward decl. */ 388 struct mmc; 389 390 #if CONFIG_IS_ENABLED(DM_MMC) 391 struct dm_mmc_ops { 392 /** 393 * send_cmd() - Send a command to the MMC device 394 * 395 * @dev: Device to receive the command 396 * @cmd: Command to send 397 * @data: Additional data to send/receive 398 * @return 0 if OK, -ve on error 399 */ 400 int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd, 401 struct mmc_data *data); 402 403 /** 404 * set_ios() - Set the I/O speed/width for an MMC device 405 * 406 * @dev: Device to update 407 * @return 0 if OK, -ve on error 408 */ 409 int (*set_ios)(struct udevice *dev); 410 411 /** 412 * send_init_stream() - send the initialization stream: 74 clock cycles 413 * This is used after power up before sending the first command 414 * 415 * @dev: Device to update 416 */ 417 void (*send_init_stream)(struct udevice *dev); 418 419 /** 420 * get_cd() - See whether a card is present 421 * 422 * @dev: Device to check 423 * @return 0 if not present, 1 if present, -ve on error 424 */ 425 int (*get_cd)(struct udevice *dev); 426 427 /** 428 * get_wp() - See whether a card has write-protect enabled 429 * 430 * @dev: Device to check 431 * @return 0 if write-enabled, 1 if write-protected, -ve on error 432 */ 433 int (*get_wp)(struct udevice *dev); 434 435 #ifdef MMC_SUPPORTS_TUNING 436 /** 437 * execute_tuning() - Start the tuning process 438 * 439 * @dev: Device to start the tuning 440 * @opcode: Command opcode to send 441 * @return 0 if OK, -ve on error 442 */ 443 int (*execute_tuning)(struct udevice *dev, uint opcode); 444 #endif 445 446 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 447 /** 448 * wait_dat0() - wait until dat0 is in the target state 449 * (CLK must be running during the wait) 450 * 451 * @dev: Device to check 452 * @state: target state 453 * @timeout: timeout in us 454 * @return 0 if dat0 is in the target state, -ve on error 455 */ 456 int (*wait_dat0)(struct udevice *dev, int state, int timeout); 457 #endif 458 }; 459 460 #define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) 461 462 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, 463 struct mmc_data *data); 464 int dm_mmc_set_ios(struct udevice *dev); 465 void dm_mmc_send_init_stream(struct udevice *dev); 466 int dm_mmc_get_cd(struct udevice *dev); 467 int dm_mmc_get_wp(struct udevice *dev); 468 int dm_mmc_execute_tuning(struct udevice *dev, uint opcode); 469 int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout); 470 471 /* Transition functions for compatibility */ 472 int mmc_set_ios(struct mmc *mmc); 473 void mmc_send_init_stream(struct mmc *mmc); 474 int mmc_getcd(struct mmc *mmc); 475 int mmc_getwp(struct mmc *mmc); 476 int mmc_execute_tuning(struct mmc *mmc, uint opcode); 477 int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); 478 479 #else 480 struct mmc_ops { 481 int (*send_cmd)(struct mmc *mmc, 482 struct mmc_cmd *cmd, struct mmc_data *data); 483 int (*set_ios)(struct mmc *mmc); 484 int (*init)(struct mmc *mmc); 485 int (*getcd)(struct mmc *mmc); 486 int (*getwp)(struct mmc *mmc); 487 }; 488 #endif 489 490 struct mmc_config { 491 const char *name; 492 #if !CONFIG_IS_ENABLED(DM_MMC) 493 const struct mmc_ops *ops; 494 #endif 495 uint host_caps; 496 uint voltages; 497 uint f_min; 498 uint f_max; 499 uint b_max; 500 unsigned char part_type; 501 }; 502 503 struct sd_ssr { 504 unsigned int au; /* In sectors */ 505 unsigned int erase_timeout; /* In milliseconds */ 506 unsigned int erase_offset; /* In milliseconds */ 507 }; 508 509 enum bus_mode { 510 MMC_LEGACY, 511 SD_LEGACY, 512 MMC_HS, 513 SD_HS, 514 MMC_HS_52, 515 MMC_DDR_52, 516 UHS_SDR12, 517 UHS_SDR25, 518 UHS_SDR50, 519 UHS_DDR50, 520 UHS_SDR104, 521 MMC_HS_200, 522 MMC_MODES_END 523 }; 524 525 const char *mmc_mode_name(enum bus_mode mode); 526 void mmc_dump_capabilities(const char *text, uint caps); 527 528 static inline bool mmc_is_mode_ddr(enum bus_mode mode) 529 { 530 if (mode == MMC_DDR_52) 531 return true; 532 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 533 else if (mode == UHS_DDR50) 534 return true; 535 #endif 536 else 537 return false; 538 } 539 540 #define UHS_CAPS (MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) | \ 541 MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_SDR104) | \ 542 MMC_CAP(UHS_DDR50)) 543 544 static inline bool supports_uhs(uint caps) 545 { 546 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) 547 return (caps & UHS_CAPS) ? true : false; 548 #else 549 return false; 550 #endif 551 } 552 553 /* 554 * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device 555 * with mmc_get_mmc_dev(). 556 * 557 * TODO struct mmc should be in mmc_private but it's hard to fix right now 558 */ 559 struct mmc { 560 #if !CONFIG_IS_ENABLED(BLK) 561 struct list_head link; 562 #endif 563 const struct mmc_config *cfg; /* provided configuration */ 564 uint version; 565 void *priv; 566 uint has_init; 567 int high_capacity; 568 bool clk_disable; /* true if the clock can be turned off */ 569 uint bus_width; 570 uint clock; 571 enum mmc_voltage signal_voltage; 572 uint card_caps; 573 uint host_caps; 574 uint ocr; 575 uint dsr; 576 uint dsr_imp; 577 uint scr[2]; 578 uint csd[4]; 579 uint cid[4]; 580 ushort rca; 581 u8 part_support; 582 u8 part_attr; 583 u8 wr_rel_set; 584 u8 part_config; 585 uint tran_speed; 586 uint legacy_speed; /* speed for the legacy mode provided by the card */ 587 uint read_bl_len; 588 #if CONFIG_IS_ENABLED(MMC_WRITE) 589 uint write_bl_len; 590 uint erase_grp_size; /* in 512-byte sectors */ 591 #endif 592 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) 593 uint hc_wp_grp_size; /* in 512-byte sectors */ 594 #endif 595 #if CONFIG_IS_ENABLED(MMC_WRITE) 596 struct sd_ssr ssr; /* SD status register */ 597 #endif 598 u64 capacity; 599 u64 capacity_user; 600 u64 capacity_boot; 601 u64 capacity_rpmb; 602 u64 capacity_gp[4]; 603 #ifndef CONFIG_SPL_BUILD 604 u64 enh_user_start; 605 u64 enh_user_size; 606 #endif 607 #if !CONFIG_IS_ENABLED(BLK) 608 struct blk_desc block_dev; 609 #endif 610 char op_cond_pending; /* 1 if we are waiting on an op_cond command */ 611 char init_in_progress; /* 1 if we have done mmc_start_init() */ 612 char preinit; /* start init as early as possible */ 613 int ddr_mode; 614 #if CONFIG_IS_ENABLED(DM_MMC) 615 struct udevice *dev; /* Device for this MMC controller */ 616 #if CONFIG_IS_ENABLED(DM_REGULATOR) 617 struct udevice *vmmc_supply; /* Main voltage regulator (Vcc)*/ 618 struct udevice *vqmmc_supply; /* IO voltage regulator (Vccq)*/ 619 #endif 620 #endif 621 u8 *ext_csd; 622 u32 cardtype; /* cardtype read from the MMC */ 623 enum mmc_voltage current_voltage; 624 enum bus_mode selected_mode; /* mode currently used */ 625 enum bus_mode best_mode; /* best mode is the supported mode with the 626 * highest bandwidth. It may not always be the 627 * operating mode due to limitations when 628 * accessing the boot partitions 629 */ 630 u32 quirks; 631 }; 632 633 struct mmc_hwpart_conf { 634 struct { 635 uint enh_start; /* in 512-byte sectors */ 636 uint enh_size; /* in 512-byte sectors, if 0 no enh area */ 637 unsigned wr_rel_change : 1; 638 unsigned wr_rel_set : 1; 639 } user; 640 struct { 641 uint size; /* in 512-byte sectors */ 642 unsigned enhanced : 1; 643 unsigned wr_rel_change : 1; 644 unsigned wr_rel_set : 1; 645 } gp_part[4]; 646 }; 647 648 enum mmc_hwpart_conf_mode { 649 MMC_HWPART_CONF_CHECK, 650 MMC_HWPART_CONF_SET, 651 MMC_HWPART_CONF_COMPLETE, 652 }; 653 654 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); 655 656 /** 657 * mmc_bind() - Set up a new MMC device ready for probing 658 * 659 * A child block device is bound with the IF_TYPE_MMC interface type. This 660 * allows the device to be used with CONFIG_BLK 661 * 662 * @dev: MMC device to set up 663 * @mmc: MMC struct 664 * @cfg: MMC configuration 665 * @return 0 if OK, -ve on error 666 */ 667 int mmc_bind(struct udevice *dev, struct mmc *mmc, 668 const struct mmc_config *cfg); 669 void mmc_destroy(struct mmc *mmc); 670 671 /** 672 * mmc_unbind() - Unbind a MMC device's child block device 673 * 674 * @dev: MMC device 675 * @return 0 if OK, -ve on error 676 */ 677 int mmc_unbind(struct udevice *dev); 678 int mmc_initialize(bd_t *bis); 679 int mmc_init(struct mmc *mmc); 680 int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error); 681 682 /** 683 * mmc_of_parse() - Parse the device tree to get the capabilities of the host 684 * 685 * @dev: MMC device 686 * @cfg: MMC configuration 687 * @return 0 if OK, -ve on error 688 */ 689 int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg); 690 691 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); 692 693 /** 694 * mmc_voltage_to_mv() - Convert a mmc_voltage in mV 695 * 696 * @voltage: The mmc_voltage to convert 697 * @return the value in mV if OK, -EINVAL on error (invalid mmc_voltage value) 698 */ 699 int mmc_voltage_to_mv(enum mmc_voltage voltage); 700 701 /** 702 * mmc_set_clock() - change the bus clock 703 * @mmc: MMC struct 704 * @clock: bus frequency in Hz 705 * @disable: flag indicating if the clock must on or off 706 * @return 0 if OK, -ve on error 707 */ 708 int mmc_set_clock(struct mmc *mmc, uint clock, bool disable); 709 710 #define MMC_CLK_ENABLE false 711 #define MMC_CLK_DISABLE true 712 713 struct mmc *find_mmc_device(int dev_num); 714 int mmc_set_dev(int dev_num); 715 void print_mmc_devices(char separator); 716 717 /** 718 * get_mmc_num() - get the total MMC device number 719 * 720 * @return 0 if there is no MMC device, else the number of devices 721 */ 722 int get_mmc_num(void); 723 int mmc_switch_part(struct mmc *mmc, unsigned int part_num); 724 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, 725 enum mmc_hwpart_conf_mode mode); 726 727 #if !CONFIG_IS_ENABLED(DM_MMC) 728 int mmc_getcd(struct mmc *mmc); 729 int board_mmc_getcd(struct mmc *mmc); 730 int mmc_getwp(struct mmc *mmc); 731 int board_mmc_getwp(struct mmc *mmc); 732 #endif 733 734 int mmc_set_dsr(struct mmc *mmc, u16 val); 735 /* Function to change the size of boot partition and rpmb partitions */ 736 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, 737 unsigned long rpmbsize); 738 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ 739 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); 740 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ 741 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); 742 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */ 743 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); 744 /* Functions to read / write the RPMB partition */ 745 int mmc_rpmb_set_key(struct mmc *mmc, void *key); 746 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter); 747 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk, 748 unsigned short cnt, unsigned char *key); 749 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk, 750 unsigned short cnt, unsigned char *key); 751 #ifdef CONFIG_CMD_BKOPS_ENABLE 752 int mmc_set_bkops_enable(struct mmc *mmc); 753 #endif 754 755 /** 756 * Start device initialization and return immediately; it does not block on 757 * polling OCR (operation condition register) status. Then you should call 758 * mmc_init, which would block on polling OCR status and complete the device 759 * initializatin. 760 * 761 * @param mmc Pointer to a MMC device struct 762 * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. 763 */ 764 int mmc_start_init(struct mmc *mmc); 765 766 /** 767 * Set preinit flag of mmc device. 768 * 769 * This will cause the device to be pre-inited during mmc_initialize(), 770 * which may save boot time if the device is not accessed until later. 771 * Some eMMC devices take 200-300ms to init, but unfortunately they 772 * must be sent a series of commands to even get them to start preparing 773 * for operation. 774 * 775 * @param mmc Pointer to a MMC device struct 776 * @param preinit preinit flag value 777 */ 778 void mmc_set_preinit(struct mmc *mmc, int preinit); 779 780 #ifdef CONFIG_MMC_SPI 781 #define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) 782 #else 783 #define mmc_host_is_spi(mmc) 0 784 #endif 785 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); 786 787 void board_mmc_power_init(void); 788 int board_mmc_init(bd_t *bis); 789 int cpu_mmc_init(bd_t *bis); 790 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); 791 int mmc_get_env_dev(void); 792 793 /* Set block count limit because of 16 bit register limit on some hardware*/ 794 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT 795 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 796 #endif 797 798 /** 799 * mmc_get_blk_desc() - Get the block descriptor for an MMC device 800 * 801 * @mmc: MMC device 802 * @return block device if found, else NULL 803 */ 804 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc); 805 806 #endif /* _MMC_H_ */ 807