xref: /openbmc/u-boot/include/linux/usb/xhci-fsl.h (revision 5381c285)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2015 Freescale Semiconductor, Inc.
4  *
5  * FSL USB HOST xHCI Controller
6  *
7  * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
8  */
9 
10 #ifndef _ASM_ARCH_XHCI_FSL_H_
11 #define _ASM_ARCH_XHCI_FSL_H_
12 
13 /* Default to the FSL XHCI defines */
14 #define USB3_PWRCTL_CLK_CMD_MASK	0x3FE000
15 #define USB3_PWRCTL_CLK_FREQ_MASK	0xFFC
16 #define USB3_PHY_PARTIAL_RX_POWERON     BIT(6)
17 #define USB3_PHY_RX_POWERON		BIT(14)
18 #define USB3_PHY_TX_POWERON		BIT(15)
19 #define USB3_PHY_TX_RX_POWERON	(USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
20 #define USB3_PWRCTL_CLK_CMD_SHIFT   14
21 #define USB3_PWRCTL_CLK_FREQ_SHIFT	22
22 #define USB3_ENABLE_BEAT_BURST		0xF
23 #define USB3_ENABLE_BEAT_BURST_MASK	0xFF
24 #define USB3_SET_BEAT_BURST_LIMIT	0xF00
25 
26 /* USBOTGSS_WRAPPER definitions */
27 #define USBOTGSS_WRAPRESET	BIT(17)
28 #define USBOTGSS_DMADISABLE BIT(16)
29 #define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
30 #define USBOTGSS_STANDBYMODE_SMRT		BIT(5)
31 #define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
32 #define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
33 #define USBOTGSS_IDLEMODE_SMRT BIT(3)
34 #define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
35 
36 /* USBOTGSS_IRQENABLE_SET_0 bit */
37 #define USBOTGSS_COREIRQ_EN	BIT(1)
38 
39 /* USBOTGSS_IRQENABLE_SET_1 bits */
40 #define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN	BIT(1)
41 #define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN	BIT(3)
42 #define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	BIT(4)
43 #define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	BIT(5)
44 #define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	BIT(8)
45 #define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	BIT(11)
46 #define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN	BIT(12)
47 #define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN	BIT(13)
48 #define USBOTGSS_IRQ_SET_1_OEVT_EN		BIT(16)
49 #define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	BIT(17)
50 
51 struct fsl_xhci {
52 	struct xhci_hccr *hcd;
53 	struct dwc3 *dwc3_reg;
54 };
55 
56 #if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_ARCH_LS1012A)
57 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
58 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
59 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
60 #elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
61 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
62 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
63 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
64 #elif defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
65 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
66 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
67 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR
68 #endif
69 
70 #define FSL_USB_XHCI_ADDR	{CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
71 					CONFIG_SYS_FSL_XHCI_USB2_ADDR, \
72 					CONFIG_SYS_FSL_XHCI_USB3_ADDR}
73 #endif /* _ASM_ARCH_XHCI_FSL_H_ */
74