xref: /openbmc/u-boot/include/linux/usb/xhci-fsl.h (revision 23ff8633)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * FSL USB HOST xHCI Controller
5  *
6  * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef _ASM_ARCH_XHCI_FSL_H_
12 #define _ASM_ARCH_XHCI_FSL_H_
13 
14 /* Default to the FSL XHCI defines */
15 #define USB3_PWRCTL_CLK_CMD_MASK	0x3FE000
16 #define USB3_PWRCTL_CLK_FREQ_MASK	0xFFC
17 #define USB3_PHY_PARTIAL_RX_POWERON     BIT(6)
18 #define USB3_PHY_RX_POWERON		BIT(14)
19 #define USB3_PHY_TX_POWERON		BIT(15)
20 #define USB3_PHY_TX_RX_POWERON	(USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
21 #define USB3_PWRCTL_CLK_CMD_SHIFT   14
22 #define USB3_PWRCTL_CLK_FREQ_SHIFT	22
23 
24 /* USBOTGSS_WRAPPER definitions */
25 #define USBOTGSS_WRAPRESET	BIT(17)
26 #define USBOTGSS_DMADISABLE BIT(16)
27 #define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
28 #define USBOTGSS_STANDBYMODE_SMRT		BIT(5)
29 #define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
30 #define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
31 #define USBOTGSS_IDLEMODE_SMRT BIT(3)
32 #define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
33 
34 /* USBOTGSS_IRQENABLE_SET_0 bit */
35 #define USBOTGSS_COREIRQ_EN	BIT(1)
36 
37 /* USBOTGSS_IRQENABLE_SET_1 bits */
38 #define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN	BIT(1)
39 #define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN	BIT(3)
40 #define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	BIT(4)
41 #define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	BIT(5)
42 #define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	BIT(8)
43 #define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	BIT(11)
44 #define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN	BIT(12)
45 #define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN	BIT(13)
46 #define USBOTGSS_IRQ_SET_1_OEVT_EN		BIT(16)
47 #define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	BIT(17)
48 
49 struct fsl_xhci {
50 	struct xhci_hccr *hcd;
51 	struct dwc3 *dwc3_reg;
52 };
53 
54 #if defined(CONFIG_LS102XA)
55 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
56 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
57 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
58 #elif defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
59 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
60 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
61 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
62 #elif defined(CONFIG_LS1043A)
63 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
64 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
65 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
66 #endif
67 
68 #define FSL_USB_XHCI_ADDR	{CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
69 					CONFIG_SYS_FSL_XHCI_USB2_ADDR, \
70 					CONFIG_SYS_FSL_XHCI_USB3_ADDR}
71 #endif /* _ASM_ARCH_XHCI_FSL_H_ */
72