1 /* 2 * This file holds USB constants and structures that are needed for 3 * USB device APIs. These are used by the USB device model, which is 4 * defined in chapter 9 of the USB 2.0 specification and in the 5 * Wireless USB 1.0 (spread around). Linux has several APIs in C that 6 * need these: 7 * 8 * - the master/host side Linux-USB kernel driver API; 9 * - the "usbfs" user space API; and 10 * - the Linux "gadget" slave/device/peripheral side driver API. 11 * 12 * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems 13 * act either as a USB master/host or as a USB slave/device. That means 14 * the master and slave side APIs benefit from working well together. 15 * 16 * There's also "Wireless USB", using low power short range radios for 17 * peripheral interconnection but otherwise building on the USB framework. 18 * 19 * Note all descriptors are declared '__attribute__((packed))' so that: 20 * 21 * [a] they never get padded, either internally (USB spec writers 22 * probably handled that) or externally; 23 * 24 * [b] so that accessing bigger-than-a-bytes fields will never 25 * generate bus errors on any platform, even when the location of 26 * its descriptor inside a bundle isn't "naturally aligned", and 27 * 28 * [c] for consistency, removing all doubt even when it appears to 29 * someone that the two other points are non-issues for that 30 * particular descriptor type. 31 */ 32 33 #ifndef __LINUX_USB_CH9_H 34 #define __LINUX_USB_CH9_H 35 36 #include <linux/types.h> /* __u8 etc */ 37 #include <asm/byteorder.h> /* le16_to_cpu */ 38 #include <asm/unaligned.h> /* get_unaligned() */ 39 40 /*-------------------------------------------------------------------------*/ 41 42 /* CONTROL REQUEST SUPPORT */ 43 44 /* 45 * USB directions 46 * 47 * This bit flag is used in endpoint descriptors' bEndpointAddress field. 48 * It's also one of three fields in control requests bRequestType. 49 */ 50 #define USB_DIR_OUT 0 /* to device */ 51 #define USB_DIR_IN 0x80 /* to host */ 52 53 /* 54 * USB types, the second of three bRequestType fields 55 */ 56 #define USB_TYPE_MASK (0x03 << 5) 57 #define USB_TYPE_STANDARD (0x00 << 5) 58 #define USB_TYPE_CLASS (0x01 << 5) 59 #define USB_TYPE_VENDOR (0x02 << 5) 60 #define USB_TYPE_RESERVED (0x03 << 5) 61 62 /* 63 * USB recipients, the third of three bRequestType fields 64 */ 65 #define USB_RECIP_MASK 0x1f 66 #define USB_RECIP_DEVICE 0x00 67 #define USB_RECIP_INTERFACE 0x01 68 #define USB_RECIP_ENDPOINT 0x02 69 #define USB_RECIP_OTHER 0x03 70 /* From Wireless USB 1.0 */ 71 #define USB_RECIP_PORT 0x04 72 #define USB_RECIP_RPIPE 0x05 73 74 /* 75 * Standard requests, for the bRequest field of a SETUP packet. 76 * 77 * These are qualified by the bRequestType field, so that for example 78 * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved 79 * by a GET_STATUS request. 80 */ 81 #define USB_REQ_GET_STATUS 0x00 82 #define USB_REQ_CLEAR_FEATURE 0x01 83 #define USB_REQ_SET_FEATURE 0x03 84 #define USB_REQ_SET_ADDRESS 0x05 85 #define USB_REQ_GET_DESCRIPTOR 0x06 86 #define USB_REQ_SET_DESCRIPTOR 0x07 87 #define USB_REQ_GET_CONFIGURATION 0x08 88 #define USB_REQ_SET_CONFIGURATION 0x09 89 #define USB_REQ_GET_INTERFACE 0x0A 90 #define USB_REQ_SET_INTERFACE 0x0B 91 #define USB_REQ_SYNCH_FRAME 0x0C 92 #define USB_REQ_SET_SEL 0x30 93 #define USB_REQ_SET_ISOCH_DELAY 0x31 94 95 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ 96 #define USB_REQ_GET_ENCRYPTION 0x0E 97 #define USB_REQ_RPIPE_ABORT 0x0E 98 #define USB_REQ_SET_HANDSHAKE 0x0F 99 #define USB_REQ_RPIPE_RESET 0x0F 100 #define USB_REQ_GET_HANDSHAKE 0x10 101 #define USB_REQ_SET_CONNECTION 0x11 102 #define USB_REQ_SET_SECURITY_DATA 0x12 103 #define USB_REQ_GET_SECURITY_DATA 0x13 104 #define USB_REQ_SET_WUSB_DATA 0x14 105 #define USB_REQ_LOOPBACK_DATA_WRITE 0x15 106 #define USB_REQ_LOOPBACK_DATA_READ 0x16 107 #define USB_REQ_SET_INTERFACE_DS 0x17 108 109 /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, 110 * used by hubs to put ports into a new L1 suspend state, except that it 111 * forgot to define its number ... 112 */ 113 114 /* 115 * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and 116 * are read as a bit array returned by USB_REQ_GET_STATUS. (So there 117 * are at most sixteen features of each type.) Hubs may also support a 118 * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. 119 */ 120 #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ 121 #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ 122 #define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ 123 #define USB_DEVICE_BATTERY 2 /* (wireless) */ 124 #define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ 125 #define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ 126 #define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ 127 #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ 128 #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ 129 130 /* 131 * Test Mode Selectors 132 * See USB 2.0 spec Table 9-7 133 */ 134 #define TEST_J 1 135 #define TEST_K 2 136 #define TEST_SE0_NAK 3 137 #define TEST_PACKET 4 138 #define TEST_FORCE_EN 5 139 140 /* 141 * New Feature Selectors as added by USB 3.0 142 * See USB 3.0 spec Table 9-6 143 */ 144 #define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ 145 #define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ 146 #define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ 147 #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ 148 149 #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 150 /* 151 * Suspend Options, Table 9-7 USB 3.0 spec 152 */ 153 #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) 154 #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) 155 156 #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ 157 158 /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ 159 #define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ 160 #define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ 161 #define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ 162 163 /** 164 * struct usb_ctrlrequest - SETUP data for a USB device control request 165 * @bRequestType: matches the USB bmRequestType field 166 * @bRequest: matches the USB bRequest field 167 * @wValue: matches the USB wValue field (le16 byte order) 168 * @wIndex: matches the USB wIndex field (le16 byte order) 169 * @wLength: matches the USB wLength field (le16 byte order) 170 * 171 * This structure is used to send control requests to a USB device. It matches 172 * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the 173 * USB spec for a fuller description of the different fields, and what they are 174 * used for. 175 * 176 * Note that the driver for any interface can issue control requests. 177 * For most devices, interfaces don't coordinate with each other, so 178 * such requests may be made at any time. 179 */ 180 struct usb_ctrlrequest { 181 __u8 bRequestType; 182 __u8 bRequest; 183 __le16 wValue; 184 __le16 wIndex; 185 __le16 wLength; 186 } __attribute__ ((packed)); 187 188 /*-------------------------------------------------------------------------*/ 189 190 /* 191 * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or 192 * (rarely) accepted by SET_DESCRIPTOR. 193 * 194 * Note that all multi-byte values here are encoded in little endian 195 * byte order "on the wire". Within the kernel and when exposed 196 * through the Linux-USB APIs, they are not converted to cpu byte 197 * order; it is the responsibility of the client code to do this. 198 * The single exception is when device and configuration descriptors (but 199 * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); 200 * in this case the fields are converted to host endianness by the kernel. 201 */ 202 203 /* 204 * Descriptor types ... USB 2.0 spec table 9.5 205 */ 206 #define USB_DT_DEVICE 0x01 207 #define USB_DT_CONFIG 0x02 208 #define USB_DT_STRING 0x03 209 #define USB_DT_INTERFACE 0x04 210 #define USB_DT_ENDPOINT 0x05 211 #define USB_DT_DEVICE_QUALIFIER 0x06 212 #define USB_DT_OTHER_SPEED_CONFIG 0x07 213 #define USB_DT_INTERFACE_POWER 0x08 214 /* these are from a minor usb 2.0 revision (ECN) */ 215 #define USB_DT_OTG 0x09 216 #define USB_DT_DEBUG 0x0a 217 #define USB_DT_INTERFACE_ASSOCIATION 0x0b 218 /* these are from the Wireless USB spec */ 219 #define USB_DT_SECURITY 0x0c 220 #define USB_DT_KEY 0x0d 221 #define USB_DT_ENCRYPTION_TYPE 0x0e 222 #define USB_DT_BOS 0x0f 223 #define USB_DT_DEVICE_CAPABILITY 0x10 224 #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 225 #define USB_DT_WIRE_ADAPTER 0x21 226 #define USB_DT_RPIPE 0x22 227 #define USB_DT_CS_RADIO_CONTROL 0x23 228 /* From the T10 UAS specification */ 229 #define USB_DT_PIPE_USAGE 0x24 230 /* From the USB 3.0 spec */ 231 #define USB_DT_SS_ENDPOINT_COMP 0x30 232 /* From HID 1.11 spec */ 233 #define USB_DT_HID_REPORT 0x22 234 235 /* Conventional codes for class-specific descriptors. The convention is 236 * defined in the USB "Common Class" Spec (3.11). Individual class specs 237 * are authoritative for their usage, not the "common class" writeup. 238 */ 239 #define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) 240 #define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) 241 #define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) 242 #define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) 243 #define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) 244 245 /* All standard descriptors have these 2 fields at the beginning */ 246 struct usb_descriptor_header { 247 __u8 bLength; 248 __u8 bDescriptorType; 249 } __attribute__ ((packed)); 250 251 252 /*-------------------------------------------------------------------------*/ 253 254 /* USB_DT_DEVICE: Device descriptor */ 255 struct usb_device_descriptor { 256 __u8 bLength; 257 __u8 bDescriptorType; 258 259 __le16 bcdUSB; 260 __u8 bDeviceClass; 261 __u8 bDeviceSubClass; 262 __u8 bDeviceProtocol; 263 __u8 bMaxPacketSize0; 264 __le16 idVendor; 265 __le16 idProduct; 266 __le16 bcdDevice; 267 __u8 iManufacturer; 268 __u8 iProduct; 269 __u8 iSerialNumber; 270 __u8 bNumConfigurations; 271 } __attribute__ ((packed)); 272 273 #define USB_DT_DEVICE_SIZE 18 274 275 276 /* 277 * Device and/or Interface Class codes 278 * as found in bDeviceClass or bInterfaceClass 279 * and defined by www.usb.org documents 280 */ 281 #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ 282 #define USB_CLASS_AUDIO 1 283 #define USB_CLASS_COMM 2 284 #define USB_CLASS_HID 3 285 #define USB_CLASS_PHYSICAL 5 286 #define USB_CLASS_STILL_IMAGE 6 287 #define USB_CLASS_PRINTER 7 288 #define USB_CLASS_MASS_STORAGE 8 289 #define USB_CLASS_HUB 9 290 #define USB_CLASS_CDC_DATA 0x0a 291 #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ 292 #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ 293 #define USB_CLASS_VIDEO 0x0e 294 #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 295 #define USB_CLASS_MISC 0xef 296 #define USB_CLASS_APP_SPEC 0xfe 297 #define USB_CLASS_VENDOR_SPEC 0xff 298 299 #define USB_SUBCLASS_VENDOR_SPEC 0xff 300 301 /*-------------------------------------------------------------------------*/ 302 303 /* USB_DT_CONFIG: Configuration descriptor information. 304 * 305 * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the 306 * descriptor type is different. Highspeed-capable devices can look 307 * different depending on what speed they're currently running. Only 308 * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG 309 * descriptors. 310 */ 311 struct usb_config_descriptor { 312 __u8 bLength; 313 __u8 bDescriptorType; 314 315 __le16 wTotalLength; 316 __u8 bNumInterfaces; 317 __u8 bConfigurationValue; 318 __u8 iConfiguration; 319 __u8 bmAttributes; 320 __u8 bMaxPower; 321 } __attribute__ ((packed)); 322 323 #define USB_DT_CONFIG_SIZE 9 324 325 /* from config descriptor bmAttributes */ 326 #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ 327 #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ 328 #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ 329 #define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ 330 331 /*-------------------------------------------------------------------------*/ 332 333 /* USB_DT_STRING: String descriptor */ 334 struct usb_string_descriptor { 335 __u8 bLength; 336 __u8 bDescriptorType; 337 338 __le16 wData[1]; /* UTF-16LE encoded */ 339 } __attribute__ ((packed)); 340 341 /* note that "string" zero is special, it holds language codes that 342 * the device supports, not Unicode characters. 343 */ 344 345 /*-------------------------------------------------------------------------*/ 346 347 /* USB_DT_INTERFACE: Interface descriptor */ 348 struct usb_interface_descriptor { 349 __u8 bLength; 350 __u8 bDescriptorType; 351 352 __u8 bInterfaceNumber; 353 __u8 bAlternateSetting; 354 __u8 bNumEndpoints; 355 __u8 bInterfaceClass; 356 __u8 bInterfaceSubClass; 357 __u8 bInterfaceProtocol; 358 __u8 iInterface; 359 } __attribute__ ((packed)); 360 361 #define USB_DT_INTERFACE_SIZE 9 362 363 /*-------------------------------------------------------------------------*/ 364 365 /* USB_DT_ENDPOINT: Endpoint descriptor */ 366 struct usb_endpoint_descriptor { 367 __u8 bLength; 368 __u8 bDescriptorType; 369 370 __u8 bEndpointAddress; 371 __u8 bmAttributes; 372 __le16 wMaxPacketSize; 373 __u8 bInterval; 374 375 /* NOTE: these two are _only_ in audio endpoints. */ 376 /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ 377 __u8 bRefresh; 378 __u8 bSynchAddress; 379 } __attribute__ ((packed)); 380 381 #define USB_DT_ENDPOINT_SIZE 7 382 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ 383 384 /* Used to access common fields */ 385 struct usb_generic_descriptor { 386 __u8 bLength; 387 __u8 bDescriptorType; 388 }; 389 390 struct __packed usb_class_hid_descriptor { 391 u8 bLength; 392 u8 bDescriptorType; 393 u16 bcdCDC; 394 u8 bCountryCode; 395 u8 bNumDescriptors; /* 0x01 */ 396 u8 bDescriptorType0; 397 u16 wDescriptorLength0; 398 /* optional descriptors are not supported. */ 399 }; 400 401 struct __packed usb_class_report_descriptor { 402 u8 bLength; /* dummy */ 403 u8 bDescriptorType; 404 u16 wLength; 405 u8 bData[0]; 406 }; 407 408 /* 409 * Endpoints 410 */ 411 #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ 412 #define USB_ENDPOINT_DIR_MASK 0x80 413 414 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ 415 #define USB_ENDPOINT_XFER_CONTROL 0 416 #define USB_ENDPOINT_XFER_ISOC 1 417 #define USB_ENDPOINT_XFER_BULK 2 418 #define USB_ENDPOINT_XFER_INT 3 419 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 420 421 #define USB_ENDPOINT_MAXP_MASK 0x07ff 422 #define USB_EP_MAXP_MULT_SHIFT 11 423 #define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT) 424 #define USB_EP_MAXP_MULT(m) \ 425 (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT) 426 427 /* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ 428 #define USB_ENDPOINT_INTRTYPE 0x30 429 #define USB_ENDPOINT_INTR_PERIODIC (0 << 4) 430 #define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) 431 432 #define USB_ENDPOINT_SYNCTYPE 0x0c 433 #define USB_ENDPOINT_SYNC_NONE (0 << 2) 434 #define USB_ENDPOINT_SYNC_ASYNC (1 << 2) 435 #define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) 436 #define USB_ENDPOINT_SYNC_SYNC (3 << 2) 437 438 #define USB_ENDPOINT_USAGE_MASK 0x30 439 #define USB_ENDPOINT_USAGE_DATA 0x00 440 #define USB_ENDPOINT_USAGE_FEEDBACK 0x10 441 #define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ 442 443 /*-------------------------------------------------------------------------*/ 444 445 /** 446 * usb_endpoint_num - get the endpoint's number 447 * @epd: endpoint to be checked 448 * 449 * Returns @epd's number: 0 to 15. 450 */ 451 static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) 452 { 453 return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; 454 } 455 456 /** 457 * usb_endpoint_type - get the endpoint's transfer type 458 * @epd: endpoint to be checked 459 * 460 * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according 461 * to @epd's transfer type. 462 */ 463 static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) 464 { 465 return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; 466 } 467 468 /** 469 * usb_endpoint_dir_in - check if the endpoint has IN direction 470 * @epd: endpoint to be checked 471 * 472 * Returns true if the endpoint is of type IN, otherwise it returns false. 473 */ 474 static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) 475 { 476 return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); 477 } 478 479 /** 480 * usb_endpoint_dir_out - check if the endpoint has OUT direction 481 * @epd: endpoint to be checked 482 * 483 * Returns true if the endpoint is of type OUT, otherwise it returns false. 484 */ 485 static inline int usb_endpoint_dir_out( 486 const struct usb_endpoint_descriptor *epd) 487 { 488 return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); 489 } 490 491 /** 492 * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type 493 * @epd: endpoint to be checked 494 * 495 * Returns true if the endpoint is of type bulk, otherwise it returns false. 496 */ 497 static inline int usb_endpoint_xfer_bulk( 498 const struct usb_endpoint_descriptor *epd) 499 { 500 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 501 USB_ENDPOINT_XFER_BULK); 502 } 503 504 /** 505 * usb_endpoint_xfer_control - check if the endpoint has control transfer type 506 * @epd: endpoint to be checked 507 * 508 * Returns true if the endpoint is of type control, otherwise it returns false. 509 */ 510 static inline int usb_endpoint_xfer_control( 511 const struct usb_endpoint_descriptor *epd) 512 { 513 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 514 USB_ENDPOINT_XFER_CONTROL); 515 } 516 517 /** 518 * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type 519 * @epd: endpoint to be checked 520 * 521 * Returns true if the endpoint is of type interrupt, otherwise it returns 522 * false. 523 */ 524 static inline int usb_endpoint_xfer_int( 525 const struct usb_endpoint_descriptor *epd) 526 { 527 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 528 USB_ENDPOINT_XFER_INT); 529 } 530 531 /** 532 * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type 533 * @epd: endpoint to be checked 534 * 535 * Returns true if the endpoint is of type isochronous, otherwise it returns 536 * false. 537 */ 538 static inline int usb_endpoint_xfer_isoc( 539 const struct usb_endpoint_descriptor *epd) 540 { 541 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 542 USB_ENDPOINT_XFER_ISOC); 543 } 544 545 /** 546 * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN 547 * @epd: endpoint to be checked 548 * 549 * Returns true if the endpoint has bulk transfer type and IN direction, 550 * otherwise it returns false. 551 */ 552 static inline int usb_endpoint_is_bulk_in( 553 const struct usb_endpoint_descriptor *epd) 554 { 555 return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); 556 } 557 558 /** 559 * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT 560 * @epd: endpoint to be checked 561 * 562 * Returns true if the endpoint has bulk transfer type and OUT direction, 563 * otherwise it returns false. 564 */ 565 static inline int usb_endpoint_is_bulk_out( 566 const struct usb_endpoint_descriptor *epd) 567 { 568 return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); 569 } 570 571 /** 572 * usb_endpoint_is_int_in - check if the endpoint is interrupt IN 573 * @epd: endpoint to be checked 574 * 575 * Returns true if the endpoint has interrupt transfer type and IN direction, 576 * otherwise it returns false. 577 */ 578 static inline int usb_endpoint_is_int_in( 579 const struct usb_endpoint_descriptor *epd) 580 { 581 return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); 582 } 583 584 /** 585 * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT 586 * @epd: endpoint to be checked 587 * 588 * Returns true if the endpoint has interrupt transfer type and OUT direction, 589 * otherwise it returns false. 590 */ 591 static inline int usb_endpoint_is_int_out( 592 const struct usb_endpoint_descriptor *epd) 593 { 594 return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); 595 } 596 597 /** 598 * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN 599 * @epd: endpoint to be checked 600 * 601 * Returns true if the endpoint has isochronous transfer type and IN direction, 602 * otherwise it returns false. 603 */ 604 static inline int usb_endpoint_is_isoc_in( 605 const struct usb_endpoint_descriptor *epd) 606 { 607 return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); 608 } 609 610 /** 611 * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT 612 * @epd: endpoint to be checked 613 * 614 * Returns true if the endpoint has isochronous transfer type and OUT direction, 615 * otherwise it returns false. 616 */ 617 static inline int usb_endpoint_is_isoc_out( 618 const struct usb_endpoint_descriptor *epd) 619 { 620 return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); 621 } 622 623 /** 624 * usb_endpoint_maxp - get endpoint's max packet size 625 * @epd: endpoint to be checked 626 * 627 * Returns @epd's max packet 628 */ 629 static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) 630 { 631 return __le16_to_cpu(get_unaligned(&epd->wMaxPacketSize)); 632 } 633 634 /** 635 * usb_endpoint_maxp_mult - get endpoint's transactional opportunities 636 * @epd: endpoint to be checked 637 * 638 * Return @epd's wMaxPacketSize[12:11] + 1 639 */ 640 static inline int 641 usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd) 642 { 643 int maxp = __le16_to_cpu(epd->wMaxPacketSize); 644 645 return USB_EP_MAXP_MULT(maxp) + 1; 646 } 647 648 static inline int usb_endpoint_interrupt_type( 649 const struct usb_endpoint_descriptor *epd) 650 { 651 return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; 652 } 653 654 /*-------------------------------------------------------------------------*/ 655 656 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ 657 struct usb_ss_ep_comp_descriptor { 658 __u8 bLength; 659 __u8 bDescriptorType; 660 661 __u8 bMaxBurst; 662 __u8 bmAttributes; 663 __le16 wBytesPerInterval; 664 } __attribute__ ((packed)); 665 666 #define USB_DT_SS_EP_COMP_SIZE 6 667 668 /* Bits 4:0 of bmAttributes if this is a bulk endpoint */ 669 static inline int 670 usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) 671 { 672 int max_streams; 673 674 if (!comp) 675 return 0; 676 677 max_streams = comp->bmAttributes & 0x1f; 678 679 if (!max_streams) 680 return 0; 681 682 max_streams = 1 << max_streams; 683 684 return max_streams; 685 } 686 687 /* Bits 1:0 of bmAttributes if this is an isoc endpoint */ 688 #define USB_SS_MULT(p) (1 + ((p) & 0x3)) 689 690 /*-------------------------------------------------------------------------*/ 691 692 /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ 693 struct usb_qualifier_descriptor { 694 __u8 bLength; 695 __u8 bDescriptorType; 696 697 __le16 bcdUSB; 698 __u8 bDeviceClass; 699 __u8 bDeviceSubClass; 700 __u8 bDeviceProtocol; 701 __u8 bMaxPacketSize0; 702 __u8 bNumConfigurations; 703 __u8 bRESERVED; 704 } __attribute__ ((packed)); 705 706 707 /*-------------------------------------------------------------------------*/ 708 709 /* USB_DT_OTG (from OTG 1.0a supplement) */ 710 struct usb_otg_descriptor { 711 __u8 bLength; 712 __u8 bDescriptorType; 713 714 __u8 bmAttributes; /* support for HNP, SRP, etc */ 715 } __attribute__ ((packed)); 716 717 /* from usb_otg_descriptor.bmAttributes */ 718 #define USB_OTG_SRP (1 << 0) 719 #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ 720 721 /*-------------------------------------------------------------------------*/ 722 723 /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ 724 struct usb_debug_descriptor { 725 __u8 bLength; 726 __u8 bDescriptorType; 727 728 /* bulk endpoints with 8 byte maxpacket */ 729 __u8 bDebugInEndpoint; 730 __u8 bDebugOutEndpoint; 731 } __attribute__((packed)); 732 733 /*-------------------------------------------------------------------------*/ 734 735 /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ 736 struct usb_interface_assoc_descriptor { 737 __u8 bLength; 738 __u8 bDescriptorType; 739 740 __u8 bFirstInterface; 741 __u8 bInterfaceCount; 742 __u8 bFunctionClass; 743 __u8 bFunctionSubClass; 744 __u8 bFunctionProtocol; 745 __u8 iFunction; 746 } __attribute__ ((packed)); 747 748 749 /*-------------------------------------------------------------------------*/ 750 751 /* USB_DT_SECURITY: group of wireless security descriptors, including 752 * encryption types available for setting up a CC/association. 753 */ 754 struct usb_security_descriptor { 755 __u8 bLength; 756 __u8 bDescriptorType; 757 758 __le16 wTotalLength; 759 __u8 bNumEncryptionTypes; 760 } __attribute__((packed)); 761 762 /*-------------------------------------------------------------------------*/ 763 764 /* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys 765 * may be retrieved. 766 */ 767 struct usb_key_descriptor { 768 __u8 bLength; 769 __u8 bDescriptorType; 770 771 __u8 tTKID[3]; 772 __u8 bReserved; 773 __u8 bKeyData[0]; 774 } __attribute__((packed)); 775 776 /*-------------------------------------------------------------------------*/ 777 778 /* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ 779 struct usb_encryption_descriptor { 780 __u8 bLength; 781 __u8 bDescriptorType; 782 783 __u8 bEncryptionType; 784 #define USB_ENC_TYPE_UNSECURE 0 785 #define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ 786 #define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ 787 #define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ 788 __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ 789 __u8 bAuthKeyIndex; 790 } __attribute__((packed)); 791 792 793 /*-------------------------------------------------------------------------*/ 794 795 /* USB_DT_BOS: group of device-level capabilities */ 796 struct usb_bos_descriptor { 797 __u8 bLength; 798 __u8 bDescriptorType; 799 800 __le16 wTotalLength; 801 __u8 bNumDeviceCaps; 802 } __attribute__((packed)); 803 804 #define USB_DT_BOS_SIZE 5 805 /*-------------------------------------------------------------------------*/ 806 807 /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ 808 struct usb_dev_cap_header { 809 __u8 bLength; 810 __u8 bDescriptorType; 811 __u8 bDevCapabilityType; 812 } __attribute__((packed)); 813 814 #define USB_CAP_TYPE_WIRELESS_USB 1 815 816 struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ 817 __u8 bLength; 818 __u8 bDescriptorType; 819 __u8 bDevCapabilityType; 820 821 __u8 bmAttributes; 822 #define USB_WIRELESS_P2P_DRD (1 << 1) 823 #define USB_WIRELESS_BEACON_MASK (3 << 2) 824 #define USB_WIRELESS_BEACON_SELF (1 << 2) 825 #define USB_WIRELESS_BEACON_DIRECTED (2 << 2) 826 #define USB_WIRELESS_BEACON_NONE (3 << 2) 827 __le16 wPHYRates; /* bit rates, Mbps */ 828 #define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ 829 #define USB_WIRELESS_PHY_80 (1 << 1) 830 #define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ 831 #define USB_WIRELESS_PHY_160 (1 << 3) 832 #define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ 833 #define USB_WIRELESS_PHY_320 (1 << 5) 834 #define USB_WIRELESS_PHY_400 (1 << 6) 835 #define USB_WIRELESS_PHY_480 (1 << 7) 836 __u8 bmTFITXPowerInfo; /* TFI power levels */ 837 __u8 bmFFITXPowerInfo; /* FFI power levels */ 838 __le16 bmBandGroup; 839 __u8 bReserved; 840 } __attribute__((packed)); 841 842 /* USB 2.0 Extension descriptor */ 843 #define USB_CAP_TYPE_EXT 2 844 845 struct usb_ext_cap_descriptor { /* Link Power Management */ 846 __u8 bLength; 847 __u8 bDescriptorType; 848 __u8 bDevCapabilityType; 849 __le32 bmAttributes; 850 #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ 851 #define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ 852 #define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ 853 #define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ 854 #define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) 855 #define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) 856 } __attribute__((packed)); 857 858 #define USB_DT_USB_EXT_CAP_SIZE 7 859 860 /* 861 * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB 862 * specific device level capabilities 863 */ 864 #define USB_SS_CAP_TYPE 3 865 struct usb_ss_cap_descriptor { /* Link Power Management */ 866 __u8 bLength; 867 __u8 bDescriptorType; 868 __u8 bDevCapabilityType; 869 __u8 bmAttributes; 870 #define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ 871 __le16 wSpeedSupported; 872 #define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ 873 #define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ 874 #define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ 875 #define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ 876 __u8 bFunctionalitySupport; 877 __u8 bU1devExitLat; 878 __le16 bU2DevExitLat; 879 } __attribute__((packed)); 880 881 #define USB_DT_USB_SS_CAP_SIZE 10 882 883 /* 884 * Container ID Capability descriptor: Defines the instance unique ID used to 885 * identify the instance across all operating modes 886 */ 887 #define CONTAINER_ID_TYPE 4 888 struct usb_ss_container_id_descriptor { 889 __u8 bLength; 890 __u8 bDescriptorType; 891 __u8 bDevCapabilityType; 892 __u8 bReserved; 893 __u8 ContainerID[16]; /* 128-bit number */ 894 } __attribute__((packed)); 895 896 #define USB_DT_USB_SS_CONTN_ID_SIZE 20 897 /*-------------------------------------------------------------------------*/ 898 899 /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with 900 * each endpoint descriptor for a wireless device 901 */ 902 struct usb_wireless_ep_comp_descriptor { 903 __u8 bLength; 904 __u8 bDescriptorType; 905 906 __u8 bMaxBurst; 907 __u8 bMaxSequence; 908 __le16 wMaxStreamDelay; 909 __le16 wOverTheAirPacketSize; 910 __u8 bOverTheAirInterval; 911 __u8 bmCompAttributes; 912 #define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ 913 #define USB_ENDPOINT_SWITCH_NO 0 914 #define USB_ENDPOINT_SWITCH_SWITCH 1 915 #define USB_ENDPOINT_SWITCH_SCALE 2 916 } __attribute__((packed)); 917 918 /*-------------------------------------------------------------------------*/ 919 920 /* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless 921 * host and a device for connection set up, mutual authentication, and 922 * exchanging short lived session keys. The handshake depends on a CC. 923 */ 924 struct usb_handshake { 925 __u8 bMessageNumber; 926 __u8 bStatus; 927 __u8 tTKID[3]; 928 __u8 bReserved; 929 __u8 CDID[16]; 930 __u8 nonce[16]; 931 __u8 MIC[8]; 932 } __attribute__((packed)); 933 934 /*-------------------------------------------------------------------------*/ 935 936 /* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). 937 * A CC may also be set up using non-wireless secure channels (including 938 * wired USB!), and some devices may support CCs with multiple hosts. 939 */ 940 struct usb_connection_context { 941 __u8 CHID[16]; /* persistent host id */ 942 __u8 CDID[16]; /* device id (unique w/in host context) */ 943 __u8 CK[16]; /* connection key */ 944 } __attribute__((packed)); 945 946 /*-------------------------------------------------------------------------*/ 947 948 /* USB 2.0 defines three speeds, here's how Linux identifies them */ 949 950 enum usb_device_speed { 951 USB_SPEED_UNKNOWN = 0, /* enumerating */ 952 USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ 953 USB_SPEED_HIGH, /* usb 2.0 */ 954 USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ 955 USB_SPEED_SUPER, /* usb 3.0 */ 956 }; 957 958 #ifdef __KERNEL__ 959 960 /** 961 * usb_speed_string() - Returns human readable-name of the speed. 962 * @speed: The speed to return human-readable name for. If it's not 963 * any of the speeds defined in usb_device_speed enum, string for 964 * USB_SPEED_UNKNOWN will be returned. 965 */ 966 extern const char *usb_speed_string(enum usb_device_speed speed); 967 968 #endif 969 970 enum usb_device_state { 971 /* NOTATTACHED isn't in the USB spec, and this state acts 972 * the same as ATTACHED ... but it's clearer this way. 973 */ 974 USB_STATE_NOTATTACHED = 0, 975 976 /* chapter 9 and authentication (wireless) device states */ 977 USB_STATE_ATTACHED, 978 USB_STATE_POWERED, /* wired */ 979 USB_STATE_RECONNECTING, /* auth */ 980 USB_STATE_UNAUTHENTICATED, /* auth */ 981 USB_STATE_DEFAULT, /* limited function */ 982 USB_STATE_ADDRESS, 983 USB_STATE_CONFIGURED, /* most functions */ 984 985 USB_STATE_SUSPENDED 986 987 /* NOTE: there are actually four different SUSPENDED 988 * states, returning to POWERED, DEFAULT, ADDRESS, or 989 * CONFIGURED respectively when SOF tokens flow again. 990 * At this level there's no difference between L1 and L2 991 * suspend states. (L2 being original USB 1.1 suspend.) 992 */ 993 }; 994 995 enum usb3_link_state { 996 USB3_LPM_U0 = 0, 997 USB3_LPM_U1, 998 USB3_LPM_U2, 999 USB3_LPM_U3 1000 }; 1001 1002 /* 1003 * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. 1004 * 0xff means the parent hub will accept transitions to U1, but will not 1005 * initiate a transition. 1006 * 1007 * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to 1008 * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved 1009 * values. 1010 * 1011 * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. 1012 * 0xff means the parent hub will accept transitions to U2, but will not 1013 * initiate a transition. 1014 * 1015 * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to 1016 * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 1017 * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means 1018 * 65.024ms. 1019 */ 1020 #define USB3_LPM_DISABLED 0x0 1021 #define USB3_LPM_U1_MAX_TIMEOUT 0x7F 1022 #define USB3_LPM_U2_MAX_TIMEOUT 0xFE 1023 #define USB3_LPM_DEVICE_INITIATED 0xFF 1024 1025 struct usb_set_sel_req { 1026 __u8 u1_sel; 1027 __u8 u1_pel; 1028 __le16 u2_sel; 1029 __le16 u2_pel; 1030 } __attribute__ ((packed)); 1031 1032 /* 1033 * The Set System Exit Latency control transfer provides one byte each for 1034 * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each 1035 * are two bytes long. 1036 */ 1037 #define USB3_LPM_MAX_U1_SEL_PEL 0xFF 1038 #define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF 1039 1040 /*-------------------------------------------------------------------------*/ 1041 1042 /* 1043 * As per USB compliance update, a device that is actively drawing 1044 * more than 100mA from USB must report itself as bus-powered in 1045 * the GetStatus(DEVICE) call. 1046 * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 1047 */ 1048 #define USB_SELF_POWER_VBUS_MAX_DRAW 100 1049 1050 /** 1051 * struct usb_string - wraps a C string and its USB id 1052 * @id:the (nonzero) ID for this string 1053 * @s:the string, in UTF-8 encoding 1054 * 1055 * If you're using usb_gadget_get_string(), use this to wrap a string 1056 * together with its ID. 1057 */ 1058 struct usb_string { 1059 u8 id; 1060 const char *s; 1061 }; 1062 1063 #endif /* __LINUX_USB_CH9_H */ 1064