1 /* 2 * This file holds USB constants and structures that are needed for 3 * USB device APIs. These are used by the USB device model, which is 4 * defined in chapter 9 of the USB 2.0 specification and in the 5 * Wireless USB 1.0 (spread around). Linux has several APIs in C that 6 * need these: 7 * 8 * - the master/host side Linux-USB kernel driver API; 9 * - the "usbfs" user space API; and 10 * - the Linux "gadget" slave/device/peripheral side driver API. 11 * 12 * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems 13 * act either as a USB master/host or as a USB slave/device. That means 14 * the master and slave side APIs benefit from working well together. 15 * 16 * There's also "Wireless USB", using low power short range radios for 17 * peripheral interconnection but otherwise building on the USB framework. 18 * 19 * Note all descriptors are declared '__attribute__((packed))' so that: 20 * 21 * [a] they never get padded, either internally (USB spec writers 22 * probably handled that) or externally; 23 * 24 * [b] so that accessing bigger-than-a-bytes fields will never 25 * generate bus errors on any platform, even when the location of 26 * its descriptor inside a bundle isn't "naturally aligned", and 27 * 28 * [c] for consistency, removing all doubt even when it appears to 29 * someone that the two other points are non-issues for that 30 * particular descriptor type. 31 * 32 * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and 33 * Remy Bohmer <linux@bohmer.net> 34 */ 35 36 #ifndef __LINUX_USB_CH9_H 37 #define __LINUX_USB_CH9_H 38 39 #include <linux/types.h> /* __u8 etc */ 40 41 /*-------------------------------------------------------------------------*/ 42 43 /* CONTROL REQUEST SUPPORT */ 44 45 /* 46 * USB directions 47 * 48 * This bit flag is used in endpoint descriptors' bEndpointAddress field. 49 * It's also one of three fields in control requests bRequestType. 50 */ 51 #define USB_DIR_OUT 0 /* to device */ 52 #define USB_DIR_IN 0x80 /* to host */ 53 54 /* 55 * USB types, the second of three bRequestType fields 56 */ 57 #define USB_TYPE_MASK (0x03 << 5) 58 #define USB_TYPE_STANDARD (0x00 << 5) 59 #define USB_TYPE_CLASS (0x01 << 5) 60 #define USB_TYPE_VENDOR (0x02 << 5) 61 #define USB_TYPE_RESERVED (0x03 << 5) 62 63 /* 64 * USB recipients, the third of three bRequestType fields 65 */ 66 #define USB_RECIP_MASK 0x1f 67 #define USB_RECIP_DEVICE 0x00 68 #define USB_RECIP_INTERFACE 0x01 69 #define USB_RECIP_ENDPOINT 0x02 70 #define USB_RECIP_OTHER 0x03 71 /* From Wireless USB 1.0 */ 72 #define USB_RECIP_PORT 0x04 73 #define USB_RECIP_RPIPE 0x05 74 75 /* 76 * Standard requests, for the bRequest field of a SETUP packet. 77 * 78 * These are qualified by the bRequestType field, so that for example 79 * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved 80 * by a GET_STATUS request. 81 */ 82 #define USB_REQ_GET_STATUS 0x00 83 #define USB_REQ_CLEAR_FEATURE 0x01 84 #define USB_REQ_SET_FEATURE 0x03 85 #define USB_REQ_SET_ADDRESS 0x05 86 #define USB_REQ_GET_DESCRIPTOR 0x06 87 #define USB_REQ_SET_DESCRIPTOR 0x07 88 #define USB_REQ_GET_CONFIGURATION 0x08 89 #define USB_REQ_SET_CONFIGURATION 0x09 90 #define USB_REQ_GET_INTERFACE 0x0A 91 #define USB_REQ_SET_INTERFACE 0x0B 92 #define USB_REQ_SYNCH_FRAME 0x0C 93 94 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ 95 #define USB_REQ_GET_ENCRYPTION 0x0E 96 #define USB_REQ_RPIPE_ABORT 0x0E 97 #define USB_REQ_SET_HANDSHAKE 0x0F 98 #define USB_REQ_RPIPE_RESET 0x0F 99 #define USB_REQ_GET_HANDSHAKE 0x10 100 #define USB_REQ_SET_CONNECTION 0x11 101 #define USB_REQ_SET_SECURITY_DATA 0x12 102 #define USB_REQ_GET_SECURITY_DATA 0x13 103 #define USB_REQ_SET_WUSB_DATA 0x14 104 #define USB_REQ_LOOPBACK_DATA_WRITE 0x15 105 #define USB_REQ_LOOPBACK_DATA_READ 0x16 106 #define USB_REQ_SET_INTERFACE_DS 0x17 107 108 /* 109 * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and 110 * are read as a bit array returned by USB_REQ_GET_STATUS. (So there 111 * are at most sixteen features of each type.) 112 */ 113 #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ 114 #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ 115 #define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ 116 #define USB_DEVICE_BATTERY 2 /* (wireless) */ 117 #define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ 118 #define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ 119 #define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ 120 #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ 121 #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ 122 123 #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ 124 125 126 /** 127 * struct usb_ctrlrequest - SETUP data for a USB device control request 128 * @bRequestType: matches the USB bmRequestType field 129 * @bRequest: matches the USB bRequest field 130 * @wValue: matches the USB wValue field (le16 byte order) 131 * @wIndex: matches the USB wIndex field (le16 byte order) 132 * @wLength: matches the USB wLength field (le16 byte order) 133 * 134 * This structure is used to send control requests to a USB device. It matches 135 * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the 136 * USB spec for a fuller description of the different fields, and what they are 137 * used for. 138 * 139 * Note that the driver for any interface can issue control requests. 140 * For most devices, interfaces don't coordinate with each other, so 141 * such requests may be made at any time. 142 */ 143 #if defined(__BIG_ENDIAN) || defined(__ARMEB__) 144 #error (functionality not verified for big endian targets, todo...) 145 #endif 146 147 struct usb_ctrlrequest { 148 __u8 bRequestType; 149 __u8 bRequest; 150 __le16 wValue; 151 __le16 wIndex; 152 __le16 wLength; 153 } __attribute__ ((packed)); 154 155 /*-------------------------------------------------------------------------*/ 156 157 /* 158 * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or 159 * (rarely) accepted by SET_DESCRIPTOR. 160 * 161 * Note that all multi-byte values here are encoded in little endian 162 * byte order "on the wire". But when exposed through Linux-USB APIs, 163 * they've been converted to cpu byte order. 164 */ 165 166 /* 167 * Descriptor types ... USB 2.0 spec table 9.5 168 */ 169 #define USB_DT_DEVICE 0x01 170 #define USB_DT_CONFIG 0x02 171 #define USB_DT_STRING 0x03 172 #define USB_DT_INTERFACE 0x04 173 #define USB_DT_ENDPOINT 0x05 174 #define USB_DT_DEVICE_QUALIFIER 0x06 175 #define USB_DT_OTHER_SPEED_CONFIG 0x07 176 #define USB_DT_INTERFACE_POWER 0x08 177 /* these are from a minor usb 2.0 revision (ECN) */ 178 #define USB_DT_OTG 0x09 179 #define USB_DT_DEBUG 0x0a 180 #define USB_DT_INTERFACE_ASSOCIATION 0x0b 181 /* these are from the Wireless USB spec */ 182 #define USB_DT_SECURITY 0x0c 183 #define USB_DT_KEY 0x0d 184 #define USB_DT_ENCRYPTION_TYPE 0x0e 185 #define USB_DT_BOS 0x0f 186 #define USB_DT_DEVICE_CAPABILITY 0x10 187 #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 188 #define USB_DT_WIRE_ADAPTER 0x21 189 #define USB_DT_RPIPE 0x22 190 191 /* Conventional codes for class-specific descriptors. The convention is 192 * defined in the USB "Common Class" Spec (3.11). Individual class specs 193 * are authoritative for their usage, not the "common class" writeup. 194 */ 195 #define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) 196 #define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) 197 #define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) 198 #define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) 199 #define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) 200 201 /* All standard descriptors have these 2 fields at the beginning */ 202 struct usb_descriptor_header { 203 __u8 bLength; 204 __u8 bDescriptorType; 205 } __attribute__ ((packed)); 206 207 208 /*-------------------------------------------------------------------------*/ 209 210 /* USB_DT_DEVICE: Device descriptor */ 211 struct usb_device_descriptor { 212 __u8 bLength; 213 __u8 bDescriptorType; 214 215 __le16 bcdUSB; 216 __u8 bDeviceClass; 217 __u8 bDeviceSubClass; 218 __u8 bDeviceProtocol; 219 __u8 bMaxPacketSize0; 220 __le16 idVendor; 221 __le16 idProduct; 222 __le16 bcdDevice; 223 __u8 iManufacturer; 224 __u8 iProduct; 225 __u8 iSerialNumber; 226 __u8 bNumConfigurations; 227 } __attribute__ ((packed)); 228 229 #define USB_DT_DEVICE_SIZE 18 230 231 232 /* 233 * Device and/or Interface Class codes 234 * as found in bDeviceClass or bInterfaceClass 235 * and defined by www.usb.org documents 236 */ 237 #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ 238 #define USB_CLASS_AUDIO 1 239 #define USB_CLASS_COMM 2 240 #define USB_CLASS_HID 3 241 #define USB_CLASS_PHYSICAL 5 242 #define USB_CLASS_STILL_IMAGE 6 243 #define USB_CLASS_PRINTER 7 244 #define USB_CLASS_MASS_STORAGE 8 245 #define USB_CLASS_HUB 9 246 #define USB_CLASS_CDC_DATA 0x0a 247 #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ 248 #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ 249 #define USB_CLASS_VIDEO 0x0e 250 #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 251 #define USB_CLASS_MISC 0xef 252 #define USB_CLASS_APP_SPEC 0xfe 253 #define USB_CLASS_VENDOR_SPEC 0xff 254 255 /*-------------------------------------------------------------------------*/ 256 257 /* USB_DT_CONFIG: Configuration descriptor information. 258 * 259 * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the 260 * descriptor type is different. Highspeed-capable devices can look 261 * different depending on what speed they're currently running. Only 262 * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG 263 * descriptors. 264 */ 265 struct usb_config_descriptor { 266 __u8 bLength; 267 __u8 bDescriptorType; 268 269 __le16 wTotalLength; 270 __u8 bNumInterfaces; 271 __u8 bConfigurationValue; 272 __u8 iConfiguration; 273 __u8 bmAttributes; 274 __u8 bMaxPower; 275 } __attribute__ ((packed)); 276 277 #define USB_DT_CONFIG_SIZE 9 278 279 /* from config descriptor bmAttributes */ 280 #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ 281 #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ 282 #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ 283 #define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ 284 285 /*-------------------------------------------------------------------------*/ 286 287 /* USB_DT_STRING: String descriptor */ 288 struct usb_string_descriptor { 289 __u8 bLength; 290 __u8 bDescriptorType; 291 292 __le16 wData[1]; /* UTF-16LE encoded */ 293 } __attribute__ ((packed)); 294 295 /* note that "string" zero is special, it holds language codes that 296 * the device supports, not Unicode characters. 297 */ 298 299 /*-------------------------------------------------------------------------*/ 300 301 /* USB_DT_INTERFACE: Interface descriptor */ 302 struct usb_interface_descriptor { 303 __u8 bLength; 304 __u8 bDescriptorType; 305 306 __u8 bInterfaceNumber; 307 __u8 bAlternateSetting; 308 __u8 bNumEndpoints; 309 __u8 bInterfaceClass; 310 __u8 bInterfaceSubClass; 311 __u8 bInterfaceProtocol; 312 __u8 iInterface; 313 } __attribute__ ((packed)); 314 315 #define USB_DT_INTERFACE_SIZE 9 316 317 /*-------------------------------------------------------------------------*/ 318 319 /* USB_DT_ENDPOINT: Endpoint descriptor */ 320 struct usb_endpoint_descriptor { 321 __u8 bLength; 322 __u8 bDescriptorType; 323 324 __u8 bEndpointAddress; 325 __u8 bmAttributes; 326 __le16 wMaxPacketSize; 327 __u8 bInterval; 328 329 /* NOTE: these two are _only_ in audio endpoints. */ 330 /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ 331 __u8 bRefresh; 332 __u8 bSynchAddress; 333 } __attribute__ ((packed)); 334 335 #define USB_DT_ENDPOINT_SIZE 7 336 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ 337 338 339 /* 340 * Endpoints 341 */ 342 #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ 343 #define USB_ENDPOINT_DIR_MASK 0x80 344 345 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ 346 #define USB_ENDPOINT_XFER_CONTROL 0 347 #define USB_ENDPOINT_XFER_ISOC 1 348 #define USB_ENDPOINT_XFER_BULK 2 349 #define USB_ENDPOINT_XFER_INT 3 350 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 351 352 353 /*-------------------------------------------------------------------------*/ 354 355 /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ 356 struct usb_qualifier_descriptor { 357 __u8 bLength; 358 __u8 bDescriptorType; 359 360 __le16 bcdUSB; 361 __u8 bDeviceClass; 362 __u8 bDeviceSubClass; 363 __u8 bDeviceProtocol; 364 __u8 bMaxPacketSize0; 365 __u8 bNumConfigurations; 366 __u8 bRESERVED; 367 } __attribute__ ((packed)); 368 369 370 /*-------------------------------------------------------------------------*/ 371 372 /* USB_DT_OTG (from OTG 1.0a supplement) */ 373 struct usb_otg_descriptor { 374 __u8 bLength; 375 __u8 bDescriptorType; 376 377 __u8 bmAttributes; /* support for HNP, SRP, etc */ 378 } __attribute__ ((packed)); 379 380 /* from usb_otg_descriptor.bmAttributes */ 381 #define USB_OTG_SRP (1 << 0) 382 #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ 383 384 /*-------------------------------------------------------------------------*/ 385 386 /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ 387 struct usb_debug_descriptor { 388 __u8 bLength; 389 __u8 bDescriptorType; 390 391 /* bulk endpoints with 8 byte maxpacket */ 392 __u8 bDebugInEndpoint; 393 __u8 bDebugOutEndpoint; 394 } __attribute__((packed)); 395 396 /*-------------------------------------------------------------------------*/ 397 398 /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ 399 struct usb_interface_assoc_descriptor { 400 __u8 bLength; 401 __u8 bDescriptorType; 402 403 __u8 bFirstInterface; 404 __u8 bInterfaceCount; 405 __u8 bFunctionClass; 406 __u8 bFunctionSubClass; 407 __u8 bFunctionProtocol; 408 __u8 iFunction; 409 } __attribute__ ((packed)); 410 411 412 /*-------------------------------------------------------------------------*/ 413 414 /* USB_DT_SECURITY: group of wireless security descriptors, including 415 * encryption types available for setting up a CC/association. 416 */ 417 struct usb_security_descriptor { 418 __u8 bLength; 419 __u8 bDescriptorType; 420 421 __le16 wTotalLength; 422 __u8 bNumEncryptionTypes; 423 } __attribute__((packed)); 424 425 /*-------------------------------------------------------------------------*/ 426 427 /* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys 428 * may be retrieved. 429 */ 430 struct usb_key_descriptor { 431 __u8 bLength; 432 __u8 bDescriptorType; 433 434 __u8 tTKID[3]; 435 __u8 bReserved; 436 __u8 bKeyData[0]; 437 } __attribute__((packed)); 438 439 /*-------------------------------------------------------------------------*/ 440 441 /* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ 442 struct usb_encryption_descriptor { 443 __u8 bLength; 444 __u8 bDescriptorType; 445 446 __u8 bEncryptionType; 447 #define USB_ENC_TYPE_UNSECURE 0 448 #define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ 449 #define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ 450 #define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ 451 __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ 452 __u8 bAuthKeyIndex; 453 } __attribute__((packed)); 454 455 456 /*-------------------------------------------------------------------------*/ 457 458 /* USB_DT_BOS: group of wireless capabilities */ 459 struct usb_bos_descriptor { 460 __u8 bLength; 461 __u8 bDescriptorType; 462 463 __le16 wTotalLength; 464 __u8 bNumDeviceCaps; 465 } __attribute__((packed)); 466 467 /*-------------------------------------------------------------------------*/ 468 469 /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ 470 struct usb_dev_cap_header { 471 __u8 bLength; 472 __u8 bDescriptorType; 473 __u8 bDevCapabilityType; 474 } __attribute__((packed)); 475 476 #define USB_CAP_TYPE_WIRELESS_USB 1 477 478 struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ 479 __u8 bLength; 480 __u8 bDescriptorType; 481 __u8 bDevCapabilityType; 482 483 __u8 bmAttributes; 484 #define USB_WIRELESS_P2P_DRD (1 << 1) 485 #define USB_WIRELESS_BEACON_MASK (3 << 2) 486 #define USB_WIRELESS_BEACON_SELF (1 << 2) 487 #define USB_WIRELESS_BEACON_DIRECTED (2 << 2) 488 #define USB_WIRELESS_BEACON_NONE (3 << 2) 489 __le16 wPHYRates; /* bit rates, Mbps */ 490 #define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ 491 #define USB_WIRELESS_PHY_80 (1 << 1) 492 #define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ 493 #define USB_WIRELESS_PHY_160 (1 << 3) 494 #define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ 495 #define USB_WIRELESS_PHY_320 (1 << 5) 496 #define USB_WIRELESS_PHY_400 (1 << 6) 497 #define USB_WIRELESS_PHY_480 (1 << 7) 498 __u8 bmTFITXPowerInfo; /* TFI power levels */ 499 __u8 bmFFITXPowerInfo; /* FFI power levels */ 500 __le16 bmBandGroup; 501 __u8 bReserved; 502 } __attribute__((packed)); 503 504 /*-------------------------------------------------------------------------*/ 505 506 /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with 507 * each endpoint descriptor for a wireless device 508 */ 509 struct usb_wireless_ep_comp_descriptor { 510 __u8 bLength; 511 __u8 bDescriptorType; 512 513 __u8 bMaxBurst; 514 __u8 bMaxSequence; 515 __le16 wMaxStreamDelay; 516 __le16 wOverTheAirPacketSize; 517 __u8 bOverTheAirInterval; 518 __u8 bmCompAttributes; 519 #define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ 520 #define USB_ENDPOINT_SWITCH_NO 0 521 #define USB_ENDPOINT_SWITCH_SWITCH 1 522 #define USB_ENDPOINT_SWITCH_SCALE 2 523 } __attribute__((packed)); 524 525 /*-------------------------------------------------------------------------*/ 526 527 /* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless 528 * host and a device for connection set up, mutual authentication, and 529 * exchanging short lived session keys. The handshake depends on a CC. 530 */ 531 struct usb_handshake { 532 __u8 bMessageNumber; 533 __u8 bStatus; 534 __u8 tTKID[3]; 535 __u8 bReserved; 536 __u8 CDID[16]; 537 __u8 nonce[16]; 538 __u8 MIC[8]; 539 } __attribute__((packed)); 540 541 /*-------------------------------------------------------------------------*/ 542 543 /* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). 544 * A CC may also be set up using non-wireless secure channels (including 545 * wired USB!), and some devices may support CCs with multiple hosts. 546 */ 547 struct usb_connection_context { 548 __u8 CHID[16]; /* persistent host id */ 549 __u8 CDID[16]; /* device id (unique w/in host context) */ 550 __u8 CK[16]; /* connection key */ 551 } __attribute__((packed)); 552 553 /*-------------------------------------------------------------------------*/ 554 555 /* USB 2.0 defines three speeds, here's how Linux identifies them */ 556 557 enum usb_device_speed { 558 USB_SPEED_UNKNOWN = 0, /* enumerating */ 559 USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ 560 USB_SPEED_HIGH, /* usb 2.0 */ 561 USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ 562 }; 563 564 enum usb_device_state { 565 /* NOTATTACHED isn't in the USB spec, and this state acts 566 * the same as ATTACHED ... but it's clearer this way. 567 */ 568 USB_STATE_NOTATTACHED = 0, 569 570 /* chapter 9 and authentication (wireless) device states */ 571 USB_STATE_ATTACHED, 572 USB_STATE_POWERED, /* wired */ 573 USB_STATE_UNAUTHENTICATED, /* auth */ 574 USB_STATE_RECONNECTING, /* auth */ 575 USB_STATE_DEFAULT, /* limited function */ 576 USB_STATE_ADDRESS, 577 USB_STATE_CONFIGURED, /* most functions */ 578 579 USB_STATE_SUSPENDED 580 581 /* NOTE: there are actually four different SUSPENDED 582 * states, returning to POWERED, DEFAULT, ADDRESS, or 583 * CONFIGURED respectively when SOF tokens flow again. 584 */ 585 }; 586 587 #endif /* __LINUX_USB_CH9_H */ 588