xref: /openbmc/u-boot/include/linux/mtd/st_smi.h (revision 4e3349b6)
1 /*
2  * (C) Copyright 2009
3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 #ifndef ST_SMI_H
25 #define ST_SMI_H
26 
27 /* 0xF800.0000 . 0xFBFF.FFFF	64MB	SMI (Serial Flash Mem) */
28 /* 0xFC00.0000 . 0xFC1F.FFFF	2MB	SMI (Serial Flash Reg.) */
29 
30 #define FLASH_START_ADDRESS	CONFIG_SYS_FLASH_BASE
31 #define FLASH_BANK_SIZE		CONFIG_SYS_FLASH_BANK_SIZE
32 
33 #define SMIBANK0_BASE		(FLASH_START_ADDRESS)
34 #define SMIBANK1_BASE		(SMIBANK0_BASE + FLASH_BANK_SIZE)
35 #define SMIBANK2_BASE		(SMIBANK1_BASE + FLASH_BANK_SIZE)
36 #define SMIBANK3_BASE		(SMIBANK2_BASE + FLASH_BANK_SIZE)
37 
38 #define BANK0			0
39 #define BANK1			1
40 #define BANK2			2
41 #define BANK3			3
42 
43 struct smi_regs {
44 	u32 smi_cr1;
45 	u32 smi_cr2;
46 	u32 smi_sr;
47 	u32 smi_tr;
48 	u32 smi_rr;
49 };
50 
51 /* CONTROL REG 1 */
52 #define BANK_EN			0x0000000F	/* enables all banks */
53 #define DSEL_TIME		0x00000060	/* Deselect time */
54 #define PRESCAL5		0x00000500	/* AHB_CK prescaling value */
55 #define PRESCALA		0x00000A00	/* AHB_CK prescaling value */
56 #define PRESCAL3		0x00000300	/* AHB_CK prescaling value */
57 #define PRESCAL4		0x00000400	/* AHB_CK prescaling value */
58 #define SW_MODE			0x10000000	/* enables SW Mode */
59 #define WB_MODE			0x20000000	/* Write Burst Mode */
60 #define FAST_MODE		0x00008000	/* Fast Mode */
61 #define HOLD1			0x00010000
62 
63 /* CONTROL REG 2 */
64 #define RD_STATUS_REG		0x00000400	/* reads status reg */
65 #define WE			0x00000800	/* Write Enable */
66 #define BANK0_SEL		0x00000000	/* Select Banck0 */
67 #define BANK1_SEL		0x00001000	/* Select Banck1 */
68 #define BANK2_SEL		0x00002000	/* Select Banck2 */
69 #define BANK3_SEL		0x00003000	/* Select Banck3 */
70 #define BANKSEL_SHIFT		12
71 #define SEND			0x00000080	/* Send data */
72 #define TX_LEN_1		0x00000001	/* data length = 1 byte */
73 #define TX_LEN_2		0x00000002	/* data length = 2 byte */
74 #define TX_LEN_3		0x00000003	/* data length = 3 byte */
75 #define TX_LEN_4		0x00000004	/* data length = 4 byte */
76 #define RX_LEN_1		0x00000010	/* data length = 1 byte */
77 #define RX_LEN_2		0x00000020	/* data length = 2 byte */
78 #define RX_LEN_3		0x00000030	/* data length = 3 byte */
79 #define RX_LEN_4		0x00000040	/* data length = 4 byte */
80 #define TFIE			0x00000100	/* Tx Flag Interrupt Enable */
81 #define WCIE			0x00000200	/* WCF Interrupt Enable */
82 
83 /* STATUS_REG */
84 #define INT_WCF_CLR		0xFFFFFDFF	/* clear: WCF clear */
85 #define INT_TFF_CLR		0xFFFFFEFF	/* clear: TFF clear */
86 #define WIP_BIT			0x00000001	/* WIP Bit of SPI SR */
87 #define WEL_BIT			0x00000002	/* WEL Bit of SPI SR */
88 #define RSR			0x00000005	/* Read Status regiser */
89 #define TFF			0x00000100	/* Transfer Finished FLag */
90 #define WCF			0x00000200	/* Transfer Finished FLag */
91 #define ERF1			0x00000400	/* Error Flag 1 */
92 #define ERF2			0x00000800	/* Error Flag 2 */
93 #define WM0			0x00001000	/* WM Bank 0 */
94 #define WM1			0x00002000	/* WM Bank 1 */
95 #define WM2			0x00004000	/* WM Bank 2 */
96 #define WM3			0x00008000	/* WM Bank 3 */
97 #define WM_SHIFT		12
98 
99 /* TR REG */
100 #define READ_ID			0x0000009F	/* Read Identification */
101 #define BULK_ERASE		0x000000C7	/* BULK erase */
102 #define SECTOR_ERASE		0x000000D8	/* SECTOR erase */
103 #define WRITE_ENABLE		0x00000006	/* Wenable command to FLASH */
104 
105 struct flash_dev {
106 	u32 density;
107 	ulong size;
108 	ushort sector_count;
109 };
110 
111 #define SFLASH_PAGE_SIZE	0x100	/* flash page size */
112 #define XFER_FINISH_TOUT	15	/* xfer finish timeout(in ms) */
113 #define WMODE_TOUT		15	/* write enable timeout(in ms) */
114 
115 extern void smi_init(void);
116 
117 #endif
118