1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2014 Freescale Semiconductor, Inc. 4 * Synced from Linux v4.19 5 */ 6 7 #ifndef __LINUX_MTD_SPI_NOR_H 8 #define __LINUX_MTD_SPI_NOR_H 9 10 #include <linux/bitops.h> 11 #include <linux/mtd/cfi.h> 12 #include <linux/mtd/mtd.h> 13 14 /* 15 * Manufacturer IDs 16 * 17 * The first byte returned from the flash after sending opcode SPINOR_OP_RDID. 18 * Sometimes these are the same as CFI IDs, but sometimes they aren't. 19 */ 20 #define SNOR_MFR_ATMEL CFI_MFR_ATMEL 21 #define SNOR_MFR_GIGADEVICE 0xc8 22 #define SNOR_MFR_INTEL CFI_MFR_INTEL 23 #define SNOR_MFR_ST CFI_MFR_ST /* ST Micro <--> Micron */ 24 #define SNOR_MFR_MICRON CFI_MFR_MICRON /* ST Micro <--> Micron */ 25 #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX 26 #define SNOR_MFR_SPANSION CFI_MFR_AMD 27 #define SNOR_MFR_SST CFI_MFR_SST 28 #define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */ 29 #define SNOR_MFR_ISSI 0x9d 30 31 /* 32 * Note on opcode nomenclature: some opcodes have a format like 33 * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number 34 * of I/O lines used for the opcode, address, and data (respectively). The 35 * FUNCTION has an optional suffix of '4', to represent an opcode which 36 * requires a 4-byte (32-bit) address. 37 */ 38 39 /* Flash opcodes. */ 40 #define SPINOR_OP_WREN 0x06 /* Write enable */ 41 #define SPINOR_OP_RDSR 0x05 /* Read status register */ 42 #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ 43 #define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */ 44 #define SPINOR_OP_WRSR2 0x3e /* Write status register 2 */ 45 #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ 46 #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ 47 #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ 48 #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */ 49 #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */ 50 #define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */ 51 #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ 52 #define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */ 53 #define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */ 54 #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ 55 #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ 56 #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ 57 #define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */ 58 #define SPINOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */ 59 #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ 60 #define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */ 61 #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ 62 #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ 63 #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ 64 #define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ 65 #define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ 66 67 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ 68 #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ 69 #define SPINOR_OP_READ_FAST_4B 0x0c /* Read data bytes (high frequency) */ 70 #define SPINOR_OP_READ_1_1_2_4B 0x3c /* Read data bytes (Dual Output SPI) */ 71 #define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */ 72 #define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */ 73 #define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */ 74 #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ 75 #define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */ 76 #define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */ 77 #define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */ 78 #define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */ 79 #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ 80 81 /* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */ 82 #define SPINOR_OP_READ_1_1_1_DTR 0x0d 83 #define SPINOR_OP_READ_1_2_2_DTR 0xbd 84 #define SPINOR_OP_READ_1_4_4_DTR 0xed 85 86 #define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e 87 #define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe 88 #define SPINOR_OP_READ_1_4_4_DTR_4B 0xee 89 90 /* Used for SST flashes only. */ 91 #define SPINOR_OP_BP 0x02 /* Byte program */ 92 #define SPINOR_OP_WRDI 0x04 /* Write disable */ 93 #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ 94 95 /* Used for S3AN flashes only */ 96 #define SPINOR_OP_XSE 0x50 /* Sector erase */ 97 #define SPINOR_OP_XPP 0x82 /* Page program */ 98 #define SPINOR_OP_XRDSR 0xd7 /* Read status register */ 99 100 #define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ 101 #define XSR_RDY BIT(7) /* Ready */ 102 103 /* Used for Macronix and Winbond flashes. */ 104 #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */ 105 #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */ 106 107 /* Used for Spansion flashes only. */ 108 #define SPINOR_OP_BRWR 0x17 /* Bank register write */ 109 #define SPINOR_OP_BRRD 0x16 /* Bank register read */ 110 #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ 111 112 /* Used for Micron flashes only. */ 113 #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ 114 #define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ 115 116 /* Status Register bits. */ 117 #define SR_WIP BIT(0) /* Write in progress */ 118 #define SR_WEL BIT(1) /* Write enable latch */ 119 /* meaning of other SR_* bits may differ between vendors */ 120 #define SR_BP0 BIT(2) /* Block protect 0 */ 121 #define SR_BP1 BIT(3) /* Block protect 1 */ 122 #define SR_BP2 BIT(4) /* Block protect 2 */ 123 #define SR_TB BIT(5) /* Top/Bottom protect */ 124 #define SR_SRWD BIT(7) /* SR write protect */ 125 /* Spansion/Cypress specific status bits */ 126 #define SR_E_ERR BIT(5) 127 #define SR_P_ERR BIT(6) 128 129 #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ 130 131 /* Enhanced Volatile Configuration Register bits */ 132 #define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */ 133 134 /* Flag Status Register bits */ 135 #define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */ 136 #define FSR_E_ERR BIT(5) /* Erase operation status */ 137 #define FSR_P_ERR BIT(4) /* Program operation status */ 138 #define FSR_PT_ERR BIT(1) /* Protection error bit */ 139 140 /* Configuration Register bits. */ 141 #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */ 142 143 /* Status Register 2 bits. */ 144 #define SR2_QUAD_EN_BIT7 BIT(7) 145 146 /* Supported SPI protocols */ 147 #define SNOR_PROTO_INST_MASK GENMASK(23, 16) 148 #define SNOR_PROTO_INST_SHIFT 16 149 #define SNOR_PROTO_INST(_nbits) \ 150 ((((unsigned long)(_nbits)) << SNOR_PROTO_INST_SHIFT) & \ 151 SNOR_PROTO_INST_MASK) 152 153 #define SNOR_PROTO_ADDR_MASK GENMASK(15, 8) 154 #define SNOR_PROTO_ADDR_SHIFT 8 155 #define SNOR_PROTO_ADDR(_nbits) \ 156 ((((unsigned long)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & \ 157 SNOR_PROTO_ADDR_MASK) 158 159 #define SNOR_PROTO_DATA_MASK GENMASK(7, 0) 160 #define SNOR_PROTO_DATA_SHIFT 0 161 #define SNOR_PROTO_DATA(_nbits) \ 162 ((((unsigned long)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & \ 163 SNOR_PROTO_DATA_MASK) 164 165 #define SNOR_PROTO_IS_DTR BIT(24) /* Double Transfer Rate */ 166 167 #define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits) \ 168 (SNOR_PROTO_INST(_inst_nbits) | \ 169 SNOR_PROTO_ADDR(_addr_nbits) | \ 170 SNOR_PROTO_DATA(_data_nbits)) 171 #define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits) \ 172 (SNOR_PROTO_IS_DTR | \ 173 SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits)) 174 175 enum spi_nor_protocol { 176 SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1), 177 SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2), 178 SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4), 179 SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8), 180 SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2), 181 SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4), 182 SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8), 183 SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2), 184 SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4), 185 SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8), 186 187 SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1), 188 SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2), 189 SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4), 190 SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8), 191 }; 192 193 static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto) 194 { 195 return !!(proto & SNOR_PROTO_IS_DTR); 196 } 197 198 static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto) 199 { 200 return ((unsigned long)(proto & SNOR_PROTO_INST_MASK)) >> 201 SNOR_PROTO_INST_SHIFT; 202 } 203 204 static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto) 205 { 206 return ((unsigned long)(proto & SNOR_PROTO_ADDR_MASK)) >> 207 SNOR_PROTO_ADDR_SHIFT; 208 } 209 210 static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto) 211 { 212 return ((unsigned long)(proto & SNOR_PROTO_DATA_MASK)) >> 213 SNOR_PROTO_DATA_SHIFT; 214 } 215 216 static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto) 217 { 218 return spi_nor_get_protocol_data_nbits(proto); 219 } 220 221 #define SPI_NOR_MAX_CMD_SIZE 8 222 enum spi_nor_ops { 223 SPI_NOR_OPS_READ = 0, 224 SPI_NOR_OPS_WRITE, 225 SPI_NOR_OPS_ERASE, 226 SPI_NOR_OPS_LOCK, 227 SPI_NOR_OPS_UNLOCK, 228 }; 229 230 enum spi_nor_option_flags { 231 SNOR_F_USE_FSR = BIT(0), 232 SNOR_F_HAS_SR_TB = BIT(1), 233 SNOR_F_NO_OP_CHIP_ERASE = BIT(2), 234 SNOR_F_S3AN_ADDR_DEFAULT = BIT(3), 235 SNOR_F_READY_XSR_RDY = BIT(4), 236 SNOR_F_USE_CLSR = BIT(5), 237 SNOR_F_BROKEN_RESET = BIT(6), 238 }; 239 240 /** 241 * struct flash_info - Forward declaration of a structure used internally by 242 * spi_nor_scan() 243 */ 244 struct flash_info; 245 246 /* TODO: Remove, once all users of spi_flash interface are moved to MTD */ 247 #define spi_flash spi_nor 248 249 /** 250 * struct spi_nor - Structure for defining a the SPI NOR layer 251 * @mtd: point to a mtd_info structure 252 * @lock: the lock for the read/write/erase/lock/unlock operations 253 * @dev: point to a spi device, or a spi nor controller device. 254 * @info: spi-nor part JDEC MFR id and other info 255 * @page_size: the page size of the SPI NOR 256 * @addr_width: number of address bytes 257 * @erase_opcode: the opcode for erasing a sector 258 * @read_opcode: the read opcode 259 * @read_dummy: the dummy needed by the read operation 260 * @program_opcode: the program opcode 261 * @bank_read_cmd: Bank read cmd 262 * @bank_write_cmd: Bank write cmd 263 * @bank_curr: Current flash bank 264 * @sst_write_second: used by the SST write operation 265 * @flags: flag options for the current SPI-NOR (SNOR_F_*) 266 * @read_proto: the SPI protocol for read operations 267 * @write_proto: the SPI protocol for write operations 268 * @reg_proto the SPI protocol for read_reg/write_reg/erase operations 269 * @cmd_buf: used by the write_reg 270 * @prepare: [OPTIONAL] do some preparations for the 271 * read/write/erase/lock/unlock operations 272 * @unprepare: [OPTIONAL] do some post work after the 273 * read/write/erase/lock/unlock operations 274 * @read_reg: [DRIVER-SPECIFIC] read out the register 275 * @write_reg: [DRIVER-SPECIFIC] write data to the register 276 * @read: [DRIVER-SPECIFIC] read data from the SPI NOR 277 * @write: [DRIVER-SPECIFIC] write data to the SPI NOR 278 * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR 279 * at the offset @offs; if not provided by the driver, 280 * spi-nor will send the erase opcode via write_reg() 281 * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR 282 * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR 283 * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is 284 * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode 285 * completely locked 286 * @priv: the private data 287 */ 288 struct spi_nor { 289 struct mtd_info mtd; 290 struct udevice *dev; 291 struct spi_slave *spi; 292 const struct flash_info *info; 293 u32 page_size; 294 u8 addr_width; 295 u8 erase_opcode; 296 u8 read_opcode; 297 u8 read_dummy; 298 u8 program_opcode; 299 #ifdef CONFIG_SPI_FLASH_BAR 300 u8 bank_read_cmd; 301 u8 bank_write_cmd; 302 u8 bank_curr; 303 #endif 304 enum spi_nor_protocol read_proto; 305 enum spi_nor_protocol write_proto; 306 enum spi_nor_protocol reg_proto; 307 bool sst_write_second; 308 u32 flags; 309 u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; 310 311 int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); 312 void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); 313 int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); 314 int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); 315 316 ssize_t (*read)(struct spi_nor *nor, loff_t from, 317 size_t len, u_char *read_buf); 318 ssize_t (*write)(struct spi_nor *nor, loff_t to, 319 size_t len, const u_char *write_buf); 320 int (*erase)(struct spi_nor *nor, loff_t offs); 321 322 int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); 323 int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); 324 int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); 325 int (*quad_enable)(struct spi_nor *nor); 326 327 void *priv; 328 /* Compatibility for spi_flash, remove once sf layer is merged with mtd */ 329 const char *name; 330 u32 size; 331 u32 sector_size; 332 u32 erase_size; 333 }; 334 335 static inline void spi_nor_set_flash_node(struct spi_nor *nor, 336 const struct device_node *np) 337 { 338 mtd_set_of_node(&nor->mtd, np); 339 } 340 341 static inline const struct 342 device_node *spi_nor_get_flash_node(struct spi_nor *nor) 343 { 344 return mtd_get_of_node(&nor->mtd); 345 } 346 347 /** 348 * struct spi_nor_hwcaps - Structure for describing the hardware capabilies 349 * supported by the SPI controller (bus master). 350 * @mask: the bitmask listing all the supported hw capabilies 351 */ 352 struct spi_nor_hwcaps { 353 u32 mask; 354 }; 355 356 /* 357 *(Fast) Read capabilities. 358 * MUST be ordered by priority: the higher bit position, the higher priority. 359 * As a matter of performances, it is relevant to use Octo SPI protocols first, 360 * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly 361 * (Slow) Read. 362 */ 363 #define SNOR_HWCAPS_READ_MASK GENMASK(14, 0) 364 #define SNOR_HWCAPS_READ BIT(0) 365 #define SNOR_HWCAPS_READ_FAST BIT(1) 366 #define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2) 367 368 #define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3) 369 #define SNOR_HWCAPS_READ_1_1_2 BIT(3) 370 #define SNOR_HWCAPS_READ_1_2_2 BIT(4) 371 #define SNOR_HWCAPS_READ_2_2_2 BIT(5) 372 #define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6) 373 374 #define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7) 375 #define SNOR_HWCAPS_READ_1_1_4 BIT(7) 376 #define SNOR_HWCAPS_READ_1_4_4 BIT(8) 377 #define SNOR_HWCAPS_READ_4_4_4 BIT(9) 378 #define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10) 379 380 #define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11) 381 #define SNOR_HWCAPS_READ_1_1_8 BIT(11) 382 #define SNOR_HWCAPS_READ_1_8_8 BIT(12) 383 #define SNOR_HWCAPS_READ_8_8_8 BIT(13) 384 #define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14) 385 386 /* 387 * Page Program capabilities. 388 * MUST be ordered by priority: the higher bit position, the higher priority. 389 * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the 390 * legacy SPI 1-1-1 protocol. 391 * Note that Dual Page Programs are not supported because there is no existing 392 * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory 393 * implements such commands. 394 */ 395 #define SNOR_HWCAPS_PP_MASK GENMASK(22, 16) 396 #define SNOR_HWCAPS_PP BIT(16) 397 398 #define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) 399 #define SNOR_HWCAPS_PP_1_1_4 BIT(17) 400 #define SNOR_HWCAPS_PP_1_4_4 BIT(18) 401 #define SNOR_HWCAPS_PP_4_4_4 BIT(19) 402 403 #define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20) 404 #define SNOR_HWCAPS_PP_1_1_8 BIT(20) 405 #define SNOR_HWCAPS_PP_1_8_8 BIT(21) 406 #define SNOR_HWCAPS_PP_8_8_8 BIT(22) 407 408 /** 409 * spi_nor_scan() - scan the SPI NOR 410 * @nor: the spi_nor structure 411 * 412 * The drivers can use this function to scan the SPI NOR. 413 * In the scanning, it will try to get all the necessary information to 414 * fill the mtd_info{} and the spi_nor{}. 415 * 416 * Return: 0 for success, others for failure. 417 */ 418 int spi_nor_scan(struct spi_nor *nor); 419 420 #endif 421