xref: /openbmc/u-boot/include/libata.h (revision 5187d8dd)
1 /*
2  * Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
3  * Copyright 2003-2004 Jeff Garzik
4  * Copyright (C) 2008 Freescale Semiconductor, Inc.
5  *		Dave Liu <daveliu@freescale.com>
6  *		port from libata of linux kernel
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  *
23  */
24 
25 #ifndef __LIBATA_H__
26 #define __LIBATA_H__
27 
28 #include <common.h>
29 
30 enum {
31 	/* various global constants */
32 	ATA_MAX_DEVICES		= 2,	/* per bus/port */
33 	ATA_MAX_PRD		= 256,	/* we could make these 256/256 */
34 	ATA_SECT_SIZE		= 512,
35 	ATA_MAX_SECTORS_128	= 128,
36 	ATA_MAX_SECTORS		= 256,
37 	ATA_MAX_SECTORS_LBA48	= 65535,
38 	ATA_MAX_SECTORS_TAPE	= 65535,
39 
40 	ATA_ID_WORDS		= 256,
41 	ATA_ID_SERNO		= 10,
42 	ATA_ID_FW_REV		= 23,
43 	ATA_ID_PROD		= 27,
44 	ATA_ID_OLD_PIO_MODES	= 51,
45 	ATA_ID_FIELD_VALID	= 53,
46 	ATA_ID_LBA_SECTORS	= 60,
47 	ATA_ID_MWDMA_MODES	= 63,
48 	ATA_ID_PIO_MODES	= 64,
49 	ATA_ID_EIDE_DMA_MIN	= 65,
50 	ATA_ID_EIDE_PIO		= 67,
51 	ATA_ID_EIDE_PIO_IORDY	= 68,
52 	ATA_ID_PIO4		= (1 << 1),
53 	ATA_ID_QUEUE_DEPTH	= 75,
54 	ATA_ID_SATA_CAP		= 76,
55 	ATA_ID_SATA_FEATURES	= 78,
56 	ATA_ID_SATA_FEATURES_EN	= 79,
57 	ATA_ID_MAJOR_VER	= 80,
58 	ATA_ID_MINOR_VER	= 81,
59 	ATA_ID_UDMA_MODES	= 88,
60 	ATA_ID_LBA48_SECTORS	= 100,
61 
62 	ATA_ID_SERNO_LEN	= 20,
63 	ATA_ID_FW_REV_LEN	= 8,
64 	ATA_ID_PROD_LEN		= 40,
65 
66 	ATA_PCI_CTL_OFS		= 2,
67 
68 	ATA_PIO0		= (1 << 0),
69 	ATA_PIO1		= ATA_PIO0 | (1 << 1),
70 	ATA_PIO2		= ATA_PIO1 | (1 << 2),
71 	ATA_PIO3		= ATA_PIO2 | (1 << 3),
72 	ATA_PIO4		= ATA_PIO3 | (1 << 4),
73 	ATA_PIO5		= ATA_PIO4 | (1 << 5),
74 	ATA_PIO6		= ATA_PIO5 | (1 << 6),
75 
76 	ATA_SWDMA0		= (1 << 0),
77 	ATA_SWDMA1		= ATA_SWDMA0 | (1 << 1),
78 	ATA_SWDMA2		= ATA_SWDMA1 | (1 << 2),
79 
80 	ATA_SWDMA2_ONLY		= (1 << 2),
81 
82 	ATA_MWDMA0		= (1 << 0),
83 	ATA_MWDMA1		= ATA_MWDMA0 | (1 << 1),
84 	ATA_MWDMA2		= ATA_MWDMA1 | (1 << 2),
85 
86 	ATA_MWDMA12_ONLY	= (1 << 1) | (1 << 2),
87 	ATA_MWDMA2_ONLY		= (1 << 2),
88 
89 	ATA_UDMA0		= (1 << 0),
90 	ATA_UDMA1		= ATA_UDMA0 | (1 << 1),
91 	ATA_UDMA2		= ATA_UDMA1 | (1 << 2),
92 	ATA_UDMA3		= ATA_UDMA2 | (1 << 3),
93 	ATA_UDMA4		= ATA_UDMA3 | (1 << 4),
94 	ATA_UDMA5		= ATA_UDMA4 | (1 << 5),
95 	ATA_UDMA6		= ATA_UDMA5 | (1 << 6),
96 	ATA_UDMA7		= ATA_UDMA6 | (1 << 7),
97 	/* ATA_UDMA7 is just for completeness... doesn't exist (yet?).  */
98 
99 	ATA_UDMA_MASK_40C	= ATA_UDMA2,	/* udma0-2 */
100 
101 	/* DMA-related */
102 	ATA_PRD_SZ		= 8,
103 	ATA_PRD_TBL_SZ		= (ATA_MAX_PRD * ATA_PRD_SZ),
104 	ATA_PRD_EOT		= (1 << 31),	/* end-of-table flag */
105 
106 	ATA_DMA_TABLE_OFS	= 4,
107 	ATA_DMA_STATUS		= 2,
108 	ATA_DMA_CMD		= 0,
109 	ATA_DMA_WR		= (1 << 3),
110 	ATA_DMA_START		= (1 << 0),
111 	ATA_DMA_INTR		= (1 << 2),
112 	ATA_DMA_ERR		= (1 << 1),
113 	ATA_DMA_ACTIVE		= (1 << 0),
114 
115 	/* bits in ATA command block registers */
116 	ATA_HOB			= (1 << 7),	/* LBA48 selector */
117 	ATA_NIEN		= (1 << 1),	/* disable-irq flag */
118 	ATA_LBA			= (1 << 6),	/* LBA28 selector */
119 	ATA_DEV1		= (1 << 4),	/* Select Device 1 (slave) */
120 	ATA_DEVICE_OBS		= (1 << 7) | (1 << 5), /* obs bits in dev reg */
121 	ATA_DEVCTL_OBS		= (1 << 3),	/* obsolete bit in devctl reg */
122 	ATA_BUSY		= (1 << 7),	/* BSY status bit */
123 	ATA_DRDY		= (1 << 6),	/* device ready */
124 	ATA_DF			= (1 << 5),	/* device fault */
125 	ATA_DRQ			= (1 << 3),	/* data request i/o */
126 	ATA_ERR			= (1 << 0),	/* have an error */
127 	ATA_SRST		= (1 << 2),	/* software reset */
128 	ATA_ICRC		= (1 << 7),	/* interface CRC error */
129 	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
130 	ATA_IDNF		= (1 << 4),	/* ID not found */
131 	ATA_ABORTED		= (1 << 2),	/* command aborted */
132 
133 	/* ATA command block registers */
134 	ATA_REG_DATA		= 0x00,
135 	ATA_REG_ERR		= 0x01,
136 	ATA_REG_NSECT		= 0x02,
137 	ATA_REG_LBAL		= 0x03,
138 	ATA_REG_LBAM		= 0x04,
139 	ATA_REG_LBAH		= 0x05,
140 	ATA_REG_DEVICE		= 0x06,
141 	ATA_REG_STATUS		= 0x07,
142 
143 	ATA_REG_FEATURE		= ATA_REG_ERR, /* and their aliases */
144 	ATA_REG_CMD		= ATA_REG_STATUS,
145 	ATA_REG_BYTEL		= ATA_REG_LBAM,
146 	ATA_REG_BYTEH		= ATA_REG_LBAH,
147 	ATA_REG_DEVSEL		= ATA_REG_DEVICE,
148 	ATA_REG_IRQ		= ATA_REG_NSECT,
149 
150 	/* ATA device commands */
151 	ATA_CMD_DEV_RESET	= 0x08, /* ATAPI device reset */
152 	ATA_CMD_CHK_POWER	= 0xE5, /* check power mode */
153 	ATA_CMD_STANDBY		= 0xE2, /* place in standby power mode */
154 	ATA_CMD_IDLE		= 0xE3, /* place in idle power mode */
155 	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
156 	ATA_CMD_FLUSH		= 0xE7,
157 	ATA_CMD_FLUSH_EXT	= 0xEA,
158 	ATA_CMD_ID_ATA		= 0xEC,
159 	ATA_CMD_ID_ATAPI	= 0xA1,
160 	ATA_CMD_READ		= 0xC8,
161 	ATA_CMD_READ_EXT	= 0x25,
162 	ATA_CMD_WRITE		= 0xCA,
163 	ATA_CMD_WRITE_EXT	= 0x35,
164 	ATA_CMD_WRITE_FUA_EXT	= 0x3D,
165 	ATA_CMD_FPDMA_READ	= 0x60,
166 	ATA_CMD_FPDMA_WRITE	= 0x61,
167 	ATA_CMD_PIO_READ	= 0x20,
168 	ATA_CMD_PIO_READ_EXT	= 0x24,
169 	ATA_CMD_PIO_WRITE	= 0x30,
170 	ATA_CMD_PIO_WRITE_EXT	= 0x34,
171 	ATA_CMD_READ_MULTI	= 0xC4,
172 	ATA_CMD_READ_MULTI_EXT	= 0x29,
173 	ATA_CMD_WRITE_MULTI	= 0xC5,
174 	ATA_CMD_WRITE_MULTI_EXT	= 0x39,
175 	ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
176 	ATA_CMD_SET_FEATURES	= 0xEF,
177 	ATA_CMD_SET_MULTI	= 0xC6,
178 	ATA_CMD_PACKET		= 0xA0,
179 	ATA_CMD_VERIFY		= 0x40,
180 	ATA_CMD_VERIFY_EXT	= 0x42,
181 	ATA_CMD_STANDBYNOW1	= 0xE0,
182 	ATA_CMD_IDLEIMMEDIATE	= 0xE1,
183 	ATA_CMD_SLEEP		= 0xE6,
184 	ATA_CMD_INIT_DEV_PARAMS	= 0x91,
185 	ATA_CMD_READ_NATIVE_MAX	= 0xF8,
186 	ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
187 	ATA_CMD_SET_MAX		= 0xF9,
188 	ATA_CMD_SET_MAX_EXT	= 0x37,
189 	ATA_CMD_READ_LOG_EXT	= 0x2f,
190 	ATA_CMD_PMP_READ	= 0xE4,
191 	ATA_CMD_PMP_WRITE	= 0xE8,
192 	ATA_CMD_CONF_OVERLAY	= 0xB1,
193 	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
194 
195 	/* READ_LOG_EXT pages */
196 	ATA_LOG_SATA_NCQ	= 0x10,
197 
198 	/* READ/WRITE LONG (obsolete) */
199 	ATA_CMD_READ_LONG	= 0x22,
200 	ATA_CMD_READ_LONG_ONCE	= 0x23,
201 	ATA_CMD_WRITE_LONG	= 0x32,
202 	ATA_CMD_WRITE_LONG_ONCE	= 0x33,
203 
204 	/* SETFEATURES stuff */
205 	SETFEATURES_XFER	= 0x03,
206 	XFER_UDMA_7		= 0x47,
207 	XFER_UDMA_6		= 0x46,
208 	XFER_UDMA_5		= 0x45,
209 	XFER_UDMA_4		= 0x44,
210 	XFER_UDMA_3		= 0x43,
211 	XFER_UDMA_2		= 0x42,
212 	XFER_UDMA_1		= 0x41,
213 	XFER_UDMA_0		= 0x40,
214 	XFER_MW_DMA_4		= 0x24,	/* CFA only */
215 	XFER_MW_DMA_3		= 0x23,	/* CFA only */
216 	XFER_MW_DMA_2		= 0x22,
217 	XFER_MW_DMA_1		= 0x21,
218 	XFER_MW_DMA_0		= 0x20,
219 	XFER_SW_DMA_2		= 0x12,
220 	XFER_SW_DMA_1		= 0x11,
221 	XFER_SW_DMA_0		= 0x10,
222 	XFER_PIO_6		= 0x0E,	/* CFA only */
223 	XFER_PIO_5		= 0x0D,	/* CFA only */
224 	XFER_PIO_4		= 0x0C,
225 	XFER_PIO_3		= 0x0B,
226 	XFER_PIO_2		= 0x0A,
227 	XFER_PIO_1		= 0x09,
228 	XFER_PIO_0		= 0x08,
229 	XFER_PIO_SLOW		= 0x00,
230 
231 	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
232 	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
233 
234 	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
235 
236 	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
237 	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
238 
239 	/* SETFEATURE Sector counts for SATA features */
240 	SATA_AN			= 0x05,  /* Asynchronous Notification */
241 	SATA_DIPM		= 0x03,  /* Device Initiated Power Management */
242 
243 	/* feature values for SET_MAX */
244 	ATA_SET_MAX_ADDR	= 0x00,
245 	ATA_SET_MAX_PASSWD	= 0x01,
246 	ATA_SET_MAX_LOCK	= 0x02,
247 	ATA_SET_MAX_UNLOCK	= 0x03,
248 	ATA_SET_MAX_FREEZE_LOCK	= 0x04,
249 
250 	/* feature values for DEVICE CONFIGURATION OVERLAY */
251 	ATA_DCO_RESTORE		= 0xC0,
252 	ATA_DCO_FREEZE_LOCK	= 0xC1,
253 	ATA_DCO_IDENTIFY	= 0xC2,
254 	ATA_DCO_SET		= 0xC3,
255 
256 	/* ATAPI stuff */
257 	ATAPI_PKT_DMA		= (1 << 0),
258 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
259 						   0=to device, 1=to host */
260 	ATAPI_CDB_LEN		= 16,
261 
262 	/* PMP stuff */
263 	SATA_PMP_MAX_PORTS	= 15,
264 	SATA_PMP_CTRL_PORT	= 15,
265 
266 	SATA_PMP_GSCR_DWORDS	= 128,
267 	SATA_PMP_GSCR_PROD_ID	= 0,
268 	SATA_PMP_GSCR_REV	= 1,
269 	SATA_PMP_GSCR_PORT_INFO	= 2,
270 	SATA_PMP_GSCR_ERROR	= 32,
271 	SATA_PMP_GSCR_ERROR_EN	= 33,
272 	SATA_PMP_GSCR_FEAT	= 64,
273 	SATA_PMP_GSCR_FEAT_EN	= 96,
274 
275 	SATA_PMP_PSCR_STATUS	= 0,
276 	SATA_PMP_PSCR_ERROR	= 1,
277 	SATA_PMP_PSCR_CONTROL	= 2,
278 
279 	SATA_PMP_FEAT_BIST	= (1 << 0),
280 	SATA_PMP_FEAT_PMREQ	= (1 << 1),
281 	SATA_PMP_FEAT_DYNSSC	= (1 << 2),
282 	SATA_PMP_FEAT_NOTIFY	= (1 << 3),
283 
284 	/* cable types */
285 	ATA_CBL_NONE		= 0,
286 	ATA_CBL_PATA40		= 1,
287 	ATA_CBL_PATA80		= 2,
288 	ATA_CBL_PATA40_SHORT	= 3,	/* 40 wire cable to high UDMA spec */
289 	ATA_CBL_PATA_UNK	= 4,	/* don't know, maybe 80c? */
290 	ATA_CBL_PATA_IGN	= 5,	/* don't know, ignore cable handling */
291 	ATA_CBL_SATA		= 6,
292 
293 	/* SATA Status and Control Registers */
294 	SCR_STATUS		= 0,
295 	SCR_ERROR		= 1,
296 	SCR_CONTROL		= 2,
297 	SCR_ACTIVE		= 3,
298 	SCR_NOTIFICATION	= 4,
299 
300 	/* SError bits */
301 	SERR_DATA_RECOVERED	= (1 << 0), /* recovered data error */
302 	SERR_COMM_RECOVERED	= (1 << 1), /* recovered comm failure */
303 	SERR_DATA		= (1 << 8), /* unrecovered data error */
304 	SERR_PERSISTENT		= (1 << 9), /* persistent data/comm error */
305 	SERR_PROTOCOL		= (1 << 10), /* protocol violation */
306 	SERR_INTERNAL		= (1 << 11), /* host internal error */
307 	SERR_PHYRDY_CHG		= (1 << 16), /* PHY RDY changed */
308 	SERR_PHY_INT_ERR	= (1 << 17), /* PHY internal error */
309 	SERR_COMM_WAKE		= (1 << 18), /* Comm wake */
310 	SERR_10B_8B_ERR		= (1 << 19), /* 10b to 8b decode error */
311 	SERR_DISPARITY		= (1 << 20), /* Disparity */
312 	SERR_CRC		= (1 << 21), /* CRC error */
313 	SERR_HANDSHAKE		= (1 << 22), /* Handshake error */
314 	SERR_LINK_SEQ_ERR	= (1 << 23), /* Link sequence error */
315 	SERR_TRANS_ST_ERROR	= (1 << 24), /* Transport state trans. error */
316 	SERR_UNRECOG_FIS	= (1 << 25), /* Unrecognized FIS */
317 	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
318 
319 	/* struct ata_taskfile flags */
320 	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
321 	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
322 	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
323 	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
324 	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
325 	ATA_TFLAG_FUA		= (1 << 5), /* enable FUA */
326 	ATA_TFLAG_POLLING	= (1 << 6), /* set nIEN to 1 and use polling */
327 
328 	/* protocol flags */
329 	ATA_PROT_FLAG_PIO	= (1 << 0), /* is PIO */
330 	ATA_PROT_FLAG_DMA	= (1 << 1), /* is DMA */
331 	ATA_PROT_FLAG_DATA	= ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
332 	ATA_PROT_FLAG_NCQ	= (1 << 2), /* is NCQ */
333 	ATA_PROT_FLAG_ATAPI	= (1 << 3), /* is ATAPI */
334 };
335 
336 enum ata_tf_protocols {
337 	/* ATA taskfile protocols */
338 	ATA_PROT_UNKNOWN,	/* unknown/invalid */
339 	ATA_PROT_NODATA,	/* no data */
340 	ATA_PROT_PIO,		/* PIO data xfer */
341 	ATA_PROT_DMA,		/* DMA */
342 	ATA_PROT_NCQ,		/* NCQ */
343 	ATAPI_PROT_NODATA,	/* packet command, no data */
344 	ATAPI_PROT_PIO,		/* packet command, PIO data xfer*/
345 	ATAPI_PROT_DMA,		/* packet command with special DMA sauce */
346 };
347 
348 enum ata_ioctls {
349 	ATA_IOC_GET_IO32	= 0x309,
350 	ATA_IOC_SET_IO32	= 0x324,
351 };
352 
353 enum ata_dev_typed {
354 	ATA_DEV_ATA,		/* ATA device */
355 	ATA_DEV_ATAPI,		/* ATAPI device */
356 	ATA_DEV_PMP,		/* Port Multiplier Port */
357 	ATA_DEV_UNKNOWN,	/* unknown */
358 };
359 
360 struct ata_taskfile {
361 	unsigned long		flags;		/* ATA_TFLAG_xxx */
362 	u8			protocol;	/* ATA_PROT_xxx */
363 
364 	u8			ctl;		/* control reg */
365 
366 	u8			hob_feature;	/* additional data */
367 	u8			hob_nsect;	/* to support LBA48 */
368 	u8			hob_lbal;
369 	u8			hob_lbam;
370 	u8			hob_lbah;
371 
372 	u8			feature;
373 	u8			nsect;
374 	u8			lbal;
375 	u8			lbam;
376 	u8			lbah;
377 
378 	u8			device;
379 
380 	u8			command;	/* IO operation */
381 };
382 
383 /*
384  * protocol tests
385  */
386 static inline unsigned int ata_prot_flags(u8 prot)
387 {
388 	switch (prot) {
389 	case ATA_PROT_NODATA:
390 		return 0;
391 	case ATA_PROT_PIO:
392 		return ATA_PROT_FLAG_PIO;
393 	case ATA_PROT_DMA:
394 		return ATA_PROT_FLAG_DMA;
395 	case ATA_PROT_NCQ:
396 		return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
397 	case ATAPI_PROT_NODATA:
398 		return ATA_PROT_FLAG_ATAPI;
399 	case ATAPI_PROT_PIO:
400 		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
401 	case ATAPI_PROT_DMA:
402 		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
403 	}
404 	return 0;
405 }
406 
407 static inline int ata_is_atapi(u8 prot)
408 {
409 	return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
410 }
411 
412 static inline int ata_is_nodata(u8 prot)
413 {
414 	return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
415 }
416 
417 static inline int ata_is_pio(u8 prot)
418 {
419 	return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
420 }
421 
422 static inline int ata_is_dma(u8 prot)
423 {
424 	return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
425 }
426 
427 static inline int ata_is_ncq(u8 prot)
428 {
429 	return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
430 }
431 
432 static inline int ata_is_data(u8 prot)
433 {
434 	return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
435 }
436 
437 /*
438  * id tests
439  */
440 #define ata_id_is_ata(id)		(((id)[0] & (1 << 15)) == 0)
441 #define ata_id_has_lba(id)		((id)[49] & (1 << 9))
442 #define ata_id_has_dma(id)		((id)[49] & (1 << 8))
443 #define ata_id_has_ncq(id)		((id)[76] & (1 << 8))
444 #define ata_id_queue_depth(id)		(((id)[75] & 0x1f) + 1)
445 #define ata_id_removeable(id)		((id)[0] & (1 << 7))
446 #define ata_id_iordy_disable(id)	((id)[49] & (1 << 10))
447 #define ata_id_has_iordy(id)		((id)[49] & (1 << 11))
448 
449 #define ata_id_u32(id,n)	\
450 	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
451 #define ata_id_u64(id,n)	\
452 	( ((u64) (id)[(n) + 3] << 48) | \
453 	  ((u64) (id)[(n) + 2] << 32) | \
454 	  ((u64) (id)[(n) + 1] << 16) | \
455 	  ((u64) (id)[(n) + 0]) )
456 
457 #define ata_id_cdb_intr(id)		(((id)[0] & 0x60) == 0x20)
458 
459 static inline int ata_id_has_fua(const u16 *id)
460 {
461 	if ((id[84] & 0xC000) != 0x4000)
462 		return 0;
463 	return id[84] & (1 << 6);
464 }
465 
466 static inline int ata_id_has_flush(const u16 *id)
467 {
468 	if ((id[83] & 0xC000) != 0x4000)
469 		return 0;
470 	return id[83] & (1 << 12);
471 }
472 
473 static inline int ata_id_has_flush_ext(const u16 *id)
474 {
475 	if ((id[83] & 0xC000) != 0x4000)
476 		return 0;
477 	return id[83] & (1 << 13);
478 }
479 
480 static inline int ata_id_has_lba48(const u16 *id)
481 {
482 	if ((id[83] & 0xC000) != 0x4000)
483 		return 0;
484 	if (!ata_id_u64(id, 100))
485 		return 0;
486 	return id[83] & (1 << 10);
487 }
488 
489 static inline int ata_id_hpa_enabled(const u16 *id)
490 {
491 	/* Yes children, word 83 valid bits cover word 82 data */
492 	if ((id[83] & 0xC000) != 0x4000)
493 		return 0;
494 	/* And 87 covers 85-87 */
495 	if ((id[87] & 0xC000) != 0x4000)
496 		return 0;
497 	/* Check command sets enabled as well as supported */
498 	if ((id[85] & ( 1 << 10)) == 0)
499 		return 0;
500 	return id[82] & (1 << 10);
501 }
502 
503 static inline int ata_id_has_wcache(const u16 *id)
504 {
505 	/* Yes children, word 83 valid bits cover word 82 data */
506 	if ((id[83] & 0xC000) != 0x4000)
507 		return 0;
508 	return id[82] & (1 << 5);
509 }
510 
511 static inline int ata_id_has_pm(const u16 *id)
512 {
513 	if ((id[83] & 0xC000) != 0x4000)
514 		return 0;
515 	return id[82] & (1 << 3);
516 }
517 
518 static inline int ata_id_rahead_enabled(const u16 *id)
519 {
520 	if ((id[87] & 0xC000) != 0x4000)
521 		return 0;
522 	return id[85] & (1 << 6);
523 }
524 
525 static inline int ata_id_wcache_enabled(const u16 *id)
526 {
527 	if ((id[87] & 0xC000) != 0x4000)
528 		return 0;
529 	return id[85] & (1 << 5);
530 }
531 
532 static inline unsigned int ata_id_major_version(const u16 *id)
533 {
534 	unsigned int mver;
535 
536 	if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
537 		return 0;
538 
539 	for (mver = 14; mver >= 1; mver--)
540 		if (id[ATA_ID_MAJOR_VER] & (1 << mver))
541 			break;
542 	return mver;
543 }
544 
545 static inline int ata_id_is_sata(const u16 *id)
546 {
547 	return ata_id_major_version(id) >= 5 && id[93] == 0;
548 }
549 
550 static inline int ata_id_has_tpm(const u16 *id)
551 {
552 	/* The TPM bits are only valid on ATA8 */
553 	if (ata_id_major_version(id) < 8)
554 		return 0;
555 	if ((id[48] & 0xC000) != 0x4000)
556 		return 0;
557 	return id[48] & (1 << 0);
558 }
559 
560 static inline int ata_id_has_dword_io(const u16 *id)
561 {
562 	/* ATA 8 reuses this flag for "trusted" computing */
563 	if (ata_id_major_version(id) > 7)
564 		return 0;
565 	if (id[48] & (1 << 0))
566 		return 1;
567 	return 0;
568 }
569 
570 static inline int ata_id_current_chs_valid(const u16 *id)
571 {
572 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
573 	   has not been issued to the device then the values of
574 	   id[54] to id[56] are vendor specific. */
575 	return (id[53] & 0x01) && /* Current translation valid */
576 		id[54] &&  /* cylinders in current translation */
577 		id[55] &&  /* heads in current translation */
578 		id[55] <= 16 &&
579 		id[56];    /* sectors in current translation */
580 }
581 
582 static inline int ata_id_is_cfa(const u16 *id)
583 {
584 	u16 v = id[0];
585 	if (v == 0x848A)	/* Standard CF */
586 		return 1;
587 	/* Could be CF hiding as standard ATA */
588 	if (ata_id_major_version(id) >= 3 &&  id[82] != 0xFFFF &&
589 			(id[82] & ( 1 << 2)))
590 		return 1;
591 	return 0;
592 }
593 
594 static inline int ata_drive_40wire(const u16 *dev_id)
595 {
596 	if (ata_id_is_sata(dev_id))
597 		return 0;	/* SATA */
598 	if ((dev_id[93] & 0xE000) == 0x6000)
599 		return 0;	/* 80 wire */
600 	return 1;
601 }
602 
603 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
604 {
605 	if ((dev_id[93] & 0x2000) == 0x2000)
606 		return 0;	/* 80 wire */
607 	return 1;
608 }
609 
610 static inline int atapi_cdb_len(const u16 *dev_id)
611 {
612 	u16 tmp = dev_id[0] & 0x3;
613 	switch (tmp) {
614 	case 0:		return 12;
615 	case 1:		return 16;
616 	default:	return -1;
617 	}
618 }
619 
620 static inline int atapi_command_packet_set(const u16 *dev_id)
621 {
622 	return (dev_id[0] >> 8) & 0x1f;
623 }
624 
625 static inline int atapi_id_dmadir(const u16 *dev_id)
626 {
627 	return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
628 }
629 
630 static inline int is_multi_taskfile(struct ata_taskfile *tf)
631 {
632 	return (tf->command == ATA_CMD_READ_MULTI) ||
633 	       (tf->command == ATA_CMD_WRITE_MULTI) ||
634 	       (tf->command == ATA_CMD_READ_MULTI_EXT) ||
635 	       (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
636 	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
637 }
638 
639 static inline int ata_ok(u8 status)
640 {
641 	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
642 			== ATA_DRDY);
643 }
644 
645 static inline int lba_28_ok(u64 block, u32 n_block)
646 {
647 	/* check the ending block number */
648 	return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
649 }
650 
651 static inline int lba_48_ok(u64 block, u32 n_block)
652 {
653 	/* check the ending block number */
654 	return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
655 }
656 
657 #define sata_pmp_gscr_vendor(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
658 #define sata_pmp_gscr_devid(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
659 #define sata_pmp_gscr_rev(gscr)		(((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
660 #define sata_pmp_gscr_ports(gscr)	((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
661 
662 u64 ata_id_n_sectors(u16 *id);
663 u32 ata_dev_classify(u32 sig);
664 void ata_id_c_string(const u16 *id, unsigned char *s,
665 			 unsigned int ofs, unsigned int len);
666 void ata_dump_id(u16 *id);
667 void ata_swap_buf_le16(u16 *buf, unsigned int buf_words);
668 
669 #endif /* __LIBATA_H__ */
670